Investigation on Analog and Digital Modulations Recognition Using Machine Learning Algorithms

In the field of radiocommunication, modulation type identification is one of the most important characteristics in signal processing. This study aims to implement a modulation recognition system on two approaches to machine learning techniques, the K-Nearest Neighbors (KNN) and Artificial Neural Networks (ANN). From a statistical and spectral analysis of signals, nine key differentiation features are extracted and used as input vectors for each trained model. The feature extraction is performed by using the Hilbert transform, the forward and inverse Fourier transforms. The experiments with the AMC Master dataset classify ten (10) types of analog and digital modulations. AM_DSB_FC, AM_DSB_SC, AM_USB, AM_LSB, FM, MPSK, 2PSK, MASK, 2ASK, MQAM are put forward in this article. For the simulation of the chosen model, signals are polluted by the Additive White Gaussian Noise (AWGN). The simulation results show that the best identification rate is the MLP neuronal method with 90.5% of accuracy after 10 dB signal-to-noise ratio value, with a shift of more than 15% from the k-nearest neighbors’ algorithm.

Beyond 200-Gb/s O-band intensity modulation and direct detection optics with joint look-uptable- based predistortion and digital resolution enhancement for low-cost data center interconnects

We propose a joint look-up-table(LUT)-based nonlinear predistortion and digital resolution enhancement scheme to achieve high-speed and low-cost optical interconnects using low-resolution digital-to-analog converters(DACs).The LUT-based predistortion is employed to mitigate the patterndependent effect(PDE)of a semiconductor optical amplifier(SOA),while the digital resolution enhancer(DRE)is utilized to shape the quantization noise,lowering the requirement for the resolution of DAC.We experimentally demonstrate O-band intensity modulation and direct detection(IM/DD)transmission of 124-GBd 4∕6-level pulse-amplitude modulation ePAMT-4∕6 and 112-GBd PAM-8 signals over a 2-km standard single-mode fiber(SSMF)with 3∕3.5∕4-bit DACs.In the case of 40-km SSMF transmission with an SOAbased preamplifier,124-GBd on-off-keying(OOK)/PAM-3/PAM-4 signals are successfully transmitted with 1.5∕2∕3-bit DACs.To the best of our knowledge,we have achieved the highest net data rates of 235.3-Gb∕s PAM-4,289.7-Gb∕s PAM-6,and 294.7 Gb∕s PAM-8 signals over 2-km SSMF,as well as 117.6-Gb∕s OOK,173.8-Gb∕s PAM-3,and−231.8 Gb∕s PAM-4 signals over 40-km SSMF,employing low-resolution DACs.The experimental results reveal that the joint LUT-based predistortion and DRE effectively mitigate the PDE and improve the signal-to-quantization noise ratio by shaping the noise.The proposed scheme can provide a powerful solution for low-cost IM/DD optical interconnects beyond 200 Gb∕s.

Digital image stabilization system based on inertial measurement module

In order to stabilize the video module to build digital image stabilization image sequence, a method of using inertial measurement system is proposed. Through applying real-time attitude in- formation of the camera that obtained by high-precision attitude sensor to estimate the image motion vector and then to compensate for image, the purpose of stabilizing the image sequence can be a- chieved. Experiments demonstrate that this method has a high image stabilization precision, and the up to 16 frame/s video output rate completely meets the real-time requirements.

Application Strategy of Digital Comprehensive Management and Maintenance System for Bridges

Effective application of digital integrated management and maintenance systems is essential for successful operation and maintenance management of bridge projects.This article analyzes the application strategy of such systems.It provides an overview of comprehensive digital management and maintenance of bridges,an analysis of the basic components of the integrated management and maintenance system,and its application strategies.This study aims to offer guidance for the application of the system and to improve the quality of modern bridge engineering management and maintenance work.

Efficient design method of non-uniform cosine modulated filter bank for digital hearing aids

To promote the performance of the traditional multichannel filter bank which leads to speech quality degradation,an efficient design method of the non-uniform cosine modulated filter bank（CMFB） based on the audiogram for digital hearing aids is proposed. First, a low-pass prototype filter is designed by the linear iterative algorithm. Secondly,the uniform CMFB is achieved on the basis of the principle formulas. Then, the adjacent channels of a uniform filter bank which have low or gradual slopes are merged according to the trend of audiogram of the hearing impaired person. Finally,the corresponding non-uniform CMFB is obtained. Simulation results show that the signal processed by the proposed filter bank is similar to the original signal in a time-domain waveform and spectrogram without significant distortion or difference. The speech quality results show that the personal evaluation of speech quality（PESQ） of non-uniform CMFB is 35% higher than that of the traditional design, and the hearing-aid speech quality index（HASQI） increases by about 40%.

Channel capacity and digital modulation schemes in correlated Weibull fading channels with nonidentical statistics

The novel closed-form expressions for the average channel capacity of dual selection diversity is presented, as well as, the bit-error rate （BER） of several coherent and noncoherent digital modulation schemes in the correlated Weibull fading channels with nonidentical statisticS. The results are expressed in terms of Meijer＇s Gfunction, which can be easily evaluated numerically. The simulation results are presented to validate the proposed theoretical analysis and to examine the effects of the fading severity on the concerned quantities.

A new method of demodulating the digital frequency modulation signals

A new method of estimating the frequency-known signals from the strong background noise was presented first. Then the new method was used in the demodulation of the digital frequency modulation (FSK) signals. The new demodulation method can complete the demodulation of the FSK signals only with the carrier frequency and without any carrier phase information. The simulation results show that the performance of anti-noise of the new method is better than that of the incoherent demodulation method and the fluctuation of the carrier phase has little effect on the new method. So the new demodulation method has a fine prospect in the practical applications.

A novel adaptive classification scheme for digital modulations in satellite communication

To make the modulation classification system more suitable for signals in a wide range of signal to noise ratios （SNRs）, a novel adaptive modulation classification scheme is presented in this paper. Differ-ent from traditional schemes, the proposed scheme employs a new SNR estimation algorithm for small samples before modulation classification, which makes the modulation classifier work adaptively according to estimated SNRs. Furthermore, it uses three efficient features and support vector machines （SVM） in modulation classification. Computer simulation shows that the scheme can adaptively classify ten digital modulation types （i.e. 2ASK, 4ASK, 2FSK, 4FSK, 2PSK, 4PSK, 16QAM, TFM, π/4QPSK and OQPSK） at SNRS ranging from 0dB to 25dB and success rates are over 95% when SNR is not lower than 3dB. Accuracy, efficiency and simplicity of the proposed scheme are obviously improved, which make it more adaptive to engineering applications.

Superpixel-Based Complex Field Modulation Using a Digital Micromirror Device for Focusing Light through Scattering Media

We present a digital micromirror device（DMD） based superpixel method for focusing light through scattering media by modulating the complex field of incident light. Firstly, we numerically and experimentally investigate focusing light through a scattering sample using the superpixel methods with different target complex fields.Then, single-point and multiple-point focusing experiments are performed using this superpixel-based complex modulation method. In our experiment, up to 71.5% relative enhancement is realized. The use of the DMDbased superpixel method for the control of the complex field of incident light opens an avenue to improve the enhancement of focusing light through scattering media.

DESIGN OF INTERPOLATION FILTER FOR ALL DIGITAL RECEIVER-ON THE INTERPOLATION PROBLEM OF FULL RESPONSE MODULATION SIGNALS

All digital implementation of receiver is a main topic on digital communication recently. The design of interpolation filter is one of the important problems for all digital implementation of receiver. In this paper, for full response linear modulation signal, a interpolation criterion is proposed. An interpolation formula is presented on bandwidth-limited transmission signal. For example, using the raised cosine roll off function as the system pulse response, the feasibility and effectiveness on the interpolation formula are certified by theoretical and numerical analysis. The computer simulation result on 16-QAM signal is given.

Digital modulation classification using multi-layer perceptron and time-frequency features

Considering that real communication signals corrupted by noise are generally nonstationary, and timefrequency distributions are especially suitable for the analysis of nonstationary signals, time-frequency distributions are introduced for the modulation classification of communication signals： The extracted time-frequency features have good classification information, and they are insensitive to signal to noise ratio （SNR） variation. According to good classification by the correct rate of a neural network classifier, a multilayer perceptron （MLP） classifier with better generalization, as well as, addition of time-frequency features set for classifying six different modulation types has been proposed. Computer simulations show that the MLP classifier outperforms the decision-theoretic classifier at low SNRs, and the classification experiments for real MPSK signals verify engineering significance of the MLP classifier.

Realizable Hardware-Based Method for Digital Modulation Classification

A new method suited for hardware implementation is developed to classify 8 different digital modulation types with raised cosine base-band impulse without knowing the carrier frequency and symbol timing. The normalized histogram of stagnation points for instantaneous parameters is used to recognize both ideal rectangular and raised cosine base-band digital signals. Carrier frequency estimation is used to enhance the recognition rate of phase-modulated signals. In the condition of 10 dB signal noise ratio （SNR）, the recognizing rate is over 80% . The new algorithm is suited for hardware implementation.

High Speed Electro-Absorption Modulators for Digital and Analog Optical Fiber Communications

An electro-absorption(EA)modulator is one of key components for optical fiber communications due to the high speed,small size,low voltage and integration ability with other semiconductor devices.A 40 Gb/s InGaAsP/InP multiplequantum-well(MQW)EA modulator monolithically integrated with a semiconductor optical amplifier(SOA)was fabricated for digital communications.The modulator capacitance was reduced to obtain 40 GHz bandwidth,and the SOA section helped reduce the insertion loss from 18 dB to 3 dB.InGaAlAs/InP MQW EA modulators have also been fabricated and characterized for analog optical fiber communications.A low driving voltage of 2.7 V and high spurious free dynamic range of 107 dB·Hz2/3 were estimated by static and dynamic measurements.

Digital Pulse Width Modulation Control in Power Electronic Circuits Design

The paper mainly focuses on the digital pulse width modulation (DPWM) control techniques for high performance power electronic circuit design. The problem to be solved in this study addresses the DPWM converter design for DC to DC conversion process. The control techniques have been utilized the Fuzzy Logic Rules Base method for proposed SIMULINK model of high performance power electronic circuit. The analytical calculations for real circuit design have been completed based on the mathematical modeling of the system. The results from the developed SIMULINK model confirm the target specifications of the high performance condition for power electronic circuit which was met the objective of this study. The numerical results have been carried out with the help of MATLAB/SIMULINK.

A new digital transmitter based on delta sigma modulator with bus-splitting

A new digital transmitter based on delta sigma modulator( DSM) with bus-splitting is presented in this paper. The second order low pass error-feedback delta sigma modulator( EF-DSM) is focused. The signal to noise ratio( SNR) of the EF-DSM is derived for different bus-splitting bits.Following the EF-DSM,a multi-bit digital up mixer is used for carrier frequency transform. In order to validate the theory of bus-splitting,two types of transmitters are implemented on FPGA for comparison,in which one is with non-bus-splitting and the other is with bus-splitting. The FPGA implemented transmitter with bus-splitting promotes the maximum operation speed by 39%,and reduces hardware consumptions more than 16%. Both single tone and orthogonal frequency division multiplexing( OFDM) signal source are used to evaluate the proposed transmitter.

Improved time-interleaved error feedback delta sigma modulator for digital transmitter application

Time-interleaved structure can promote the equivalent processing speed of a digital signal processing system. An improved time-interleaved error feedback delta sigma modulator( TI-EF-DSM)for digital transmitter application is presented in this paper. Two TI-EF-DSMs are compared,one is a conventional directly implemented and the other is the improved. The processing speed of the proposed two-channel improved time-interleaved error feedback delta sigma modulator( ITI-EF-DSM) is higher than the conventional directly implemented TI-EF-DSM for shortened critical path. A digital transmitter based on the ITI-EF-DSM is implemented on field progrmmable gate array( FPGA). The long term evolution( LTE) signals with different bandwidths of 5 MHz,10 MHz and 20 MHz are used as the signal source to evaluate the transmitter. The achieved SNR is 41 dB for the 20 MHz LTE signal with the processing clock of only 184 MHz.

High-speed autopolarization synchronization modulation three-dimensional structured illumination microscopy

In recent years,notable progress has been achieved in both the hardware and algorithms of structured illumination microscopy(SIM).Nevertheless,the advancement of three-dimensional structured illumination microscopy(3DSIM)has been impeded by challenges arising from the speed and intricacy of polarization modulation.We introduce a high-speed modulation 3DSIM system,leveraging the polarizationmaintaining and modulation capabilities of a digital micromirror device(DMD)in conjunction with an electrooptic modulator.The DMD-3DSIM system yields a twofold enhancement in both lateral(133 nm)and axial(300 nm)resolution compared to wide-field imaging and can acquire a data set comprising 29 sections of 1024 pixels×1024 pixels,with 15 ms exposure time and 6.75 s per volume.The versatility of the DMD-3DSIM approach was exemplified through the imaging of various specimens,including fluorescent beads,nuclear pores,microtubules,actin filaments,and mitochondria within cells,as well as plant and animal tissues.Notably,polarized 3DSIM elucidated the orientation of actin filaments.Furthermore,the implementation of diverse deconvolution algorithms further enhances 3D resolution.The DMD-based 3DSIM system presents a rapid and reliable methodology for investigating biomedical phenomena,boasting capabilities encompassing 3D superresolution,fast temporal resolution,and polarization imaging.

QIM digital watermarkingbased on LDPC code and messagepassingunder scalingattacks

Watermarking system based on quantization index modulation （QIM） is increasingly popular in high payload applications,but it is inherently fragile against amplitude scaling attacks.In order to resist desynchronization attacks of QIM digital watermarking,a low density parity check （LDPC） code-aided QIM watermarking algorithm is proposed,and the performance of QIM watermarking system can be improved by incorporating LDPC code with message passing estimation/detection framework.Using the theory of iterative estimation and decoding,the watermark signal is decoded by the proposed algorithm through iterative estimation of amplitude scaling parameters and decoding of watermark.The performance of the proposed algorithm is closer to the dirty paper Shannon limit than that of repetition code aided algorithm when the algorithm is attacked by the additive white Gaussian noise.For constant amplitude scaling attacks,the proposed algorithm can obtain the accurate estimation of amplitude scaling parameters.The simulation result shows that the algorithm can obtain similar performance compared to the algorithm without desynchronization.

Adaptive digital self-interference cancellation based on fractional order LMS in LFMCW radar

Adaptive digital self-interference cancellation(ADSIC)is a significant method to suppress self-interference and improve the performance of the linear frequency modulated continuous wave(LFMCW)radar.Due to efficient implementation structure,the conventional method based on least mean square(LMS)is widely used,but its performance is not sufficient for LFMCW radar.To achieve a better self-interference cancellation(SIC)result and more optimal radar performance,we present an ADSIC method based on fractional order LMS(FOLMS),which utilizes the multi-path cancellation structure and adaptively updates the weight coefficients of the cancellation system.First,we derive the iterative expression of the weight coefficients by using the fractional order derivative and short-term memory principle.Then,to solve the problem that it is difficult to select the parameters of the proposed method due to the non-stationary characteristics of radar transmitted signals,we construct the performance evaluation model of LFMCW radar,and analyze the relationship between the mean square deviation and the parameters of FOLMS.Finally,the theoretical analysis and simulation results show that the proposed method has a better SIC performance than the conventional methods.