Reliability-based Robust Optimization Design of Automobile Components with Non-normal Distribution Parameters

In the reliability designing procedure of the vehicle components, when the distribution styles of the random variables are unknown or non-normal distribution, the result evaluated contains great error or even is wrong if the reliability value R is larger than 1 by using the existent method, in which case the formula is necessary to be revised. This is obviously inconvenient for programming. Combining reliability-based optimization theory, robust designing method and reliability based sensitivity analysis, a new method for reliability robust designing is proposed. Therefore the influence level of the designing parameters’ changing to the reliability of vehicle components can be obtained. The reliability sensitivity with respect to design parameters is viewed as a sub-objective function in the multi-objective optimization problem satisfying reliability constraints. Given the first four moments of basic random variables, a fourth-moment technique and the proposed optimization procedure can obtain reliability-based robust design of automobile components with non-normal distribution parameters accurately and quickly. By using the proposed method, the distribution style of the random parameters is relaxed. Therefore it is much closer to the actual reliability problems. The numerical examples indicate the following: (1) The reliability value obtained by the robust method proposed increases (】0.04%) comparing to the value obtained by the ordinary optimization algorithm; (2) The absolute value of reliability-based sensitivity decreases (】0.01%), and the robustness of the products’ quality is improved accordingly. Utilizing the reliability-based optimization and robust design method in the reliability designing procedure reduces the manufacture cost and provides the theoretical basis for the reliability and robust design of the vehicle components.

High-Accuracy Confidence Regions for Distribution Parameters

With the help of today’s computers, it is always relatively easy to find maximum-likelihood estimators of one or more parameters of any specific statistical distribution, and use these to construct the corresponding approximate confidence interval/region, facilitated by the well-known asymptotic properties of the likelihood function. The purpose of this article is to make this approximation substantially more accurate by extending the Taylor expansion of the corresponding probability density function to include quadratic and cubic terms in several centralized sample means, and thus finding the corresponding -proportional correction to the original algorithm. We then demonstrate the new procedure’s usage, both for constructing confidence regions and for testing hypotheses, emphasizing that incorporating this correction carries minimal computational and programming cost. In our final chapter, we present two examples to indicate how significantly the new approximation improves the procedure’s accuracy.

Observer-based dynamic event-triggered control for distributed parameter systems over mobile sensor-plus-actuator networks

We develop a policy of observer-based dynamic event-triggered state feedback control for distributed parameter systems over a mobile sensor-plus-actuator network.It is assumed that the mobile sensing devices that provide spatially averaged state measurements can be used to improve state estimation in the network.For the purpose of decreasing the update frequency of controller and unnecessary sampled data transmission, an efficient dynamic event-triggered control policy is constructed.In an event-triggered system, when an error signal exceeds a specified time-varying threshold, it indicates the occurrence of a typical event.The global asymptotic stability of the event-triggered closed-loop system and the boundedness of the minimum inter-event time can be guaranteed.Based on the linear quadratic optimal regulator, the actuator selects the optimal displacement only when an event occurs.A simulation example is finally used to verify that the effectiveness of such a control strategy can enhance the system performance.

Stability Analysis of Multi-paralleled Grid-connected Inverters Including Distribution Parameter Characteristics of Transmission Lines

The sparse distribution characteristics of renewable energy resources can lead to there being tens of kilometers of transmission lines between a grid-connected inverter and the actual grid.Accurate analysis of the stability of such gridconnected inverter systems currently involves using a complex hyperbolic function to shaped model of the transmission line circuit.This has proved to be problematic,so,drawing upon the distribution parameter characteristics of transmission lines,this paper looks at how to use impedance-based stability criteria to assess the stability of multi-paralleled grid-connected inverters.First,the topology of multi-paralleled inverters connected to the grid via transmission lines is established,using each transmission line terminal as a grid connection point.Each grid-connected system is taken to be equivalent to a small-signal circuit model of the“current source-grid”.Euler’s formula and the Nyquist stability criterion are combined to assess the stability of the associated grid-connected current transfer functions and evaluate the stability of the grid-connected current.Finally,a simulation analysis circuit is constructed to verify whether power line intervention will cause stability problems in the grid-connected system.Overall,it is found that long-distance transmission lines are more likely to cause unstable output of the grid-connected current.It is also found that the number of grid-connected inverters,the short-circuit ratio(SCR),the distorted grid and the inverter parameters can all have a significant impact on the stability of the grid-connected current.

A modified lumped parameter model of distribution transformer winding

The modelling of the distribution transformer winding is the starting point and serves as important basis for the transformer characteristics analysis and the lightning pulse response prediction.A distributed parameters model can depict the winding characteristics accurately,but it requires complex calculations.Lumped parameter model requires less calculations,but its applicable frequency range is not wide.This paper studies the amplitude-frequency characteristics of the lightning wave,compares the transformer modelling methods and finally proposes a modified lumped parameter model,based on the above comparison.The proposed model minimizes the errors provoked by the lumped parameter approximation,and the hyperbolic functions of the distributed parameter model.By this modification it becomes possible to accurately describe the winding characteristics and rapidly obtain the node voltage response.The proposed model can provide theoretical and experimental support to lightning protection of the distribution transformer.

SPECTRUM DISTRIBUTION OF THE SEDOND ORDER GENERALIZED DISTRIBUTED PARAMETER SYSTEMS

Spectrum distribution of the second order generalized distributed parameter system was discussed via the functional analysis and operator theory in Hilbert space. The solutions of the problem and the constructive expression of the solutions are given by the generalized inverse one of bounded linear operator. This is theoretically important for studying the stabilization and asymptotic stability of the second order generalized distributed parameter system.

One-sided empirical Bayes test for location parameter in Gamma distribution

In this paper, we devote to constructing the one-sided empirical Bayes(EB) test for the location parameter in the Gamma distribution by nonparametric method. Under some mild conditions, we prove that the EB test is asymptotically optimal with the rate of the order O(n^(-δs/(2s+1))), where 1/2 ≤ δ < 1 and s > 1 is a given natural number. An example is also given to illustrate that the conditions of the main theorems are easily satisfied.

Multi-Model Based PSO Method for Burden Distribution Matrix Optimization With Expected Burden Distribution Output Behaviors

Burden distribution is one of the most important operations, and also an important upper regulation in blast furnace(BF) iron-making process. Burden distribution output behaviors(BDOB) at the throat of BF is a 3-dimensional spatial distribution produced by burden distribution matrix(BDM),including burden surface output shape(BSOS) and material layer initial thickness distribution(MLITD). Due to the lack of effective model to describe the complex input-output relations,BDM optimization and adjustment is carried out by experienced foremen. Focusing on this practical challenge, this work studies complex burden distribution input-output relations, and gives a description of expected MLITD under specific integral constraint on the basis of engineering practice. Furthermore, according to the decision variables in different number fields, this work studies optimization of BDM with expected MLITD, and proposes a multi-mode based particle swarm optimization(PSO) procedure for optimization of decision variables. Finally, experiments using industrial data show that the proposed model is effective, and optimized BDM calculated by this multi-model based PSO method can be used for expected distribution tracking.

SLIDING MODE CONTROL OF A CLASS OF ITO TYPE DISTRIBUTED PARAMETER SYSTEMS WITH DELAY

Sliding mode control problem of a class of Ito^ type partial differential equations with delay is probed. The variable structure controller is designed. The existence of motion of sliding mode is shown. And the character of invariance of sliding control system about uncertainty on the sliding switching surface and stability are analyzed.

Improved control of distributed parameter systems using wireless sensor and actuator networks:An observer-based method

In this paper,the control problem of distributed parameter systems is investigated by using wireless sensor and actuator networks with the observer-based method.Firstly,a centralized observer which makes use of the measurement information provided by the fixed sensors is designed to estimate the distributed parameter systems.The mobile agents,each of which is affixed with a controller and an actuator,can provide the observer-based control for the target systems.By using Lyapunov stability arguments,the stability for the estimation error system and distributed parameter control system is proved,meanwhile a guidance scheme for each mobile actuator is provided to improve the control performance.A numerical example is finally used to demonstrate the effectiveness and the advantages of the proposed approaches.

One high-efficiency analysis method for high-speed circuit networks containing distributed parameter elements

In the field of high-speed circuits, the analysis of mixed circuit networks containing both distributed parameter elements and lumped parameter elements becomes ever important. This paper presents a new method for analyzing mixed circuit networks. It adds transmission line end currents to the circuit variables of the classical modified nodal approach and can be applied directly to the mixed circuit networks. We also introduce a frequency-domain technique without requiring decoupling for multiconductor transmission lines. The two methods are combined together to efficiently analyze high-speed circuit networks containing uniform,nonuniform,and frequency-dependent transmission lines. Numerical experiment is presented and the results are compared with that computed by PSPICE.

Cyber-Physical Systems as General Distributed Parameter Systems:Three Types of Fractional Order Models and Emerging Research Opportunities

Cyber-physical systems(CPSs) are man-made complex systems coupled with natural processes that, as a whole,should be described by distributed parameter systems(DPSs) in general forms. This paper presents three such general models for generalized DPSs that can be used to characterize complex CPSs. These three different types of fractional operators based DPS models are: fractional Laplacian operator, fractional power of operator or fractional derivative. This research investigation is motivated by many fractional order models describing natural, physical, and anomalous phenomena, such as sub-diffusion process or super-diffusion process. The relationships among these three different operators are explored and explained. Several potential future research opportunities are then articulated followed by some conclusions and remarks.

Improved control for distributed parameter systems with time-dependent spatial domains utilizing mobile sensor-actuator networks

A guidance policy for controller performance enhancement utilizing mobile sensor-actuator networks （MSANs） is proposed for a class of distributed parameter systems （DPSs）, which are governed by diffusion partial differential equations （PDEs） with time-dependent spatial domains. Several sufficient conditions for controller performance enhancement are presented. First, the infinite dimensional operator theory is used to derive an abstract evolution equation of the systems under some rational assumptions on the operators, and a static output feedback controller is designed to control the spatial process. Then, based on Lyapunov stability arguments, guidance policies for collocated and non-collocated MSANs are provided to enhance the performance of the proposed controller, which show that the time-dependent characteristic of the spatial domains can significantly affect the design of the mobile scheme. Finally, a simulation example illustrates the effectiveness of the proposed policy.

Optimal switching policy for performance enhancement of distributed parameter systems based on event-driven control

This paper aims to improve the performance of a class of distributed parameter systems for the optimal switching of actuators and controllers based on event-driven control. It is assumed that in the available multiple actuators, only one actuator can receive the control signal and be activated over an unfixed time interval, and the other actuators keep dormant. After incorporating a state observer into the event generator, the event-driven control loop and the minimum inter-event time are ultimately bounded. Based on the event-driven state feedback control, the time intervals of unfixed length can be obtained. The optimal switching policy is based on finite horizon linear quadratic optimal control at the beginning of each time subinterval. A simulation example demonstrate the effectiveness of the proposed policy.

Simulation of a class of delay stochastic system with distributed parameter

Simulation of a class of delay stochastic system with distributed parameter is discussed. Difference schemes for the numerical computation of delay stochastic system are obtained. The precision of the difference scheme and the efficiency of the difference scheme in simulation of delay stochastic system with distributed parameter are analyzed. Examples are given to illustrate the application of the method.

THE STUDY ON A KIND OF CONTROL SYSTEM WITH NONLINEAR PARABOLIC DISTRIBUTED PARAMETERS

The modelling of one kind of nonlinear parabolic distributed parameter control system with moving boundary, which had extensive applications was presented, Two methods were used to investigate the basic characteristics of the system: I) transforming the system it? the variable domain into that in the fixed domain; 2) transforming the distributed parameter system into the lumped parameter system. It is found that there are two critical values for the control variable : the larger one determines whether or not the boundary would move, while the smaller one determines whether or not the boundary, would atop automatically. For one-dimensional system of planar, cylindrical and spherical cases the definite solution problem can be expressed as a unified form. By means of the computer simulation the open-loop control system and close-cycle feedback control system have been investigated. Numerical results agree well with theoretical results. The computer simulation shows that the system is well posed, stable, measurable and controllable.

A MAXIMUM PRINCIPLE FOR DISTRIBUTED PARAMETER SYSTEMS WITH MIXED PHASE-CONTROL CONSTRAINTS ANDENDPOINT CONSTRAINTS

This paper considered the optimal control problem for distributed parameter systems with mixed phase-control constraints and end-point constraints. Pontryagin's maximum principle for optimal control are derived via Duboviskij-Milujin theorem.

Control synthesis of linear distributed parameter switched systems

The control synthesis for switched systems is extended to distributed parameter switched systems in Hilbert space. Based on semigroup and operator theory, by means of multiple Lyapunov method incorporated average dwell time approach, sufficient con- ditions are derived in terms of linear operator inequalities frame- work for distributed parameter switched systems. Being applied to one dimensional heat propagation switched systems, these lin- ear operator inequalities are reduced to linear matrix inequalities subsequently. In particular, the state feedback gain matrices and the switching law are designed, and the state decay estimate is explicitly given whose decay coefficient completely depends on the system＇s parameter and the boundary condition. Finally, two numerical examples are given to illustrate the proposed method.

Study on Influence of Solute Atoms on Grain Boundary Character Distribution with Internal Friction Method

Based on the relationship between parameters of grain boundary internal friction peak (GBP) and grain boundary character distribution (GBCD), and the internal friction results of Al-Mg, Al-Ga, Al-Cu and Al-Zn alloys, the addition of different kinds of solute atoms has different effects on GBCD. Among them, Mg atoms are able to concentrate and stabilize GBCD in Al-Mg alloys. The origin of these effects of solute atoms on GBCD is also discussed.

Sensitivity analysis of distributed parameter elements in high-speed circuit networks

This paper presents an analysis method, based on MacCormack＇s technique, for the evaluation of the time domain sensitivity of distributed parameter elements in high-speed circuit networks. Sensitivities can be calculated from electrical and physical parameters of the distributed parameter elements. The proposed method is a direct numerical method of time-space discretization and does not require complicated mathematical deductive process. Therefore, it is very convenient to program this method. It can be applied to sensitivity analysis of general transmission lines in linear or nonlinear circuit networks. The proposed method is second-order-accurate. Numerical experiment is presented to demonstrate its accuracy and efficiency.