Application of RCO Treatment on Automobile Coating Drying Waste Gas

With the increasingly serious environmental problems,China has adopted more and more strict industrial production emission policies.Haze pollutes the weather and limits the production of polluting enterprises have seriously affected the normal production process of the factory.The pollutants discharged in automobile manufacturing process are increasing,and the environmental pollution caused by automobile coating needs to be solved urgently.Because a large amount of solvent-based paint is used in the production process,the pollution caused by volatile organic compounds is difficult to avoid.RCO is a new technology in the field of automobile coating waste gas treatment.Application of RCO in automobile coating waste gas treatment is studied.

Amorphous Zr(OH)4 coated LiNi0.915Co0.075Al0.01O2 cathode material with enhanced electrochemical performance for lithium ion batteries

LiNiCoAlO（NCA） with Zr（OH）coating is demonstrated as high performance cathode material for lithium ion batteries（LIBs）. The coated materials are synthesized via a simple dry coating method of NCA with Zr（OH）powders, and then characterized with scanning electron microscopy（SEM）, transmission electron microscopy（TEM） and X-ray photoelectron spectroscopy（XPS）. Experimental results show that amorphous Zr（OH）powders have been successfully coated on the surface of spherical NCA particles, exhibiting improved electrochemical performance. 0.50 wt% Zr（OH）coated NCA delivers a capacity of 197.6 mAh/g at the first cycle and 154.3 mAh/g after 100 cycles with a capacity retention of 78.1% at 1 C rate. In comparison, the pure NCA shows a capacity of 194.6 mAh/g at the first cycle and 142.5 mAh/g after 100 cycles with a capacity retention of 73.2% at 1 C rate. Electrochemical impedance spectroscopy（EIS） results show that the coated material exhibits a lower resistance, indicating that the coating layer can efficiently suppress transition metals dissolution and decrease the side reactions at the surface between the electrode and electrolyte. Therefore, surface coating with amorphous Zr（OH）is a simple and useful method to enhance the electrochemical performance of NCA-based materials for the cathode of LIBs.

Preparation of baicalin colon-targeted granules and its intervention effect on ulcerative colitis in rats

Baicalin(BA)is a flavonoid extracted from the dried root of Scutellaria baicalensis Georgi with excellent antioxidant and anti-inflammatory biological activities.In this study,Eudragit S100 was used as the colonic target material to prepare BA colonic targeting granules(EBCGs)based on plasticizer dry powder coating technology to improve the targeting transportation performance of BA.In vitro studies showed that EBCGs with pH-sensitive properties were successfully prepared by plasticizer dry powder coating,and in vivo animal imaging studies showed that EBCGs could deliver BA to the colon and inhibit the release of BA in the upper gastrointestinal tract(GIT).In vivo studies showed that EBCGs had good therapeutic effects in colitis,which reduced expression levels of tumor necrosis factor alpha(TNF-α)and interleukin-1β(IL-1β)and increased superoxide dismutase(SOD)activities in the colonic tissues of rats with colitis.In conclusion,Eudragit S100 could be used for the preparation of multi-unit oral colon-targeted formulations by plasticizer dry powder coating technology,and our prepared EBCGs had good colon-targeting properties,which could improve the therapeutic effect and provide a potential application for ulcerative colitis(UC).

MODELING DRYING OF A COATED PAPER

Drying of a coated paper is modeled and simulated.The paper sheet is assumed to form three zones,and each zone has its own drying mechanism.Coupling of energy and mass balances must be used in order to solve differential equations.The simulations are carried out in various drying conditions i.e.,only hot air drying,only radiant drying,and mixed hot air-radiant drying.Also the effect of one side and two side assumption on evaporation is studied.Effect of venting air speed and radiant heat source presence and its distance from the drying surface on the drying of a coated paper has been studied.It is found that both distance and venting air speed are inversely related to drying in mixed hot air-radiant drying.Both surfaces participate in evaporation however,during the last time of drying,no difference between the upper and the bottom surfaces exist.

Advanced electrode processing of lithium ion batteries:A review of powder technology in battery fabrication

Lithium ion batteries have achieved extensive applications in portable electronics and recently in electronic vehicles since its commercialization in 1990s.The vast applications of lithium ion batteries are not only derived from the innovation in electrochemistry based on emerging energy materials and chemical engineering science,but also the technological advances in the powder technologies for electrode processing and cell fabrication.Revealing the effects of powder technology on electrode microstructure evolution during electrode processing is with critical value to realize the superior electrochemical performance.This review presents the progress in understanding the basic principles of the materials processing technologies for electrodes in lithium ion batteries.The impacts of slurry mixing and coating,electrode drying,and calendering on the electrode characteristics and electrochemical performance are comprehensively analyzed.Conclusion and outlook are drawn to shed fresh lights on the further development of efficient lithium ion batteries by advancing powder technologies and related advanced energy materials.