Visualizing and witnessing first-order coherence,Bell nonlocality and purity by using a quantum steering ellipsoid in the non-inertial frame

A quantum steering ellipsoid(QSE)is a visual characterization for bipartite qubit systems,and it is also a novel avenue for describing and detecting quantum correlations.Herein,by using a QSE,we visualize and witness the first-order coherence(FOC),Bell nonlocality(BN)and purity under non-inertial frames.Also,the collective influences of the depolarizing channel and the non-coherence-generating channel(NCGC)on the FOC,BN and purity are investigated in the QSE formalism.The results reveal that the distance from the center of the QSE to the center of the Bloch sphere visualizes the FOC of a bipartite system,the lengths of the QSE semiaxis visualize the BN,and the QSE's shape and position dominate the purity of the system.One can capture the FOC,BN and purity via the shape and position of the QSE in the non-inertial frame.The depolarizing channel(the NCGC)gives rise to the shrinking and degradation(the periodical oscillation)of the QSE.One can use these traits to visually characterize and detect the FOC,BN and purity under the influence of external noise.Of particular note is that the condition for the QSE to achieve the center of the Bloch sphere cannot be influenced by the depolarizing channel and the NCGC.The characterization shows that the conditions for the disappearance of the FOC are invariant under the additional influences of the depolarizing channel and NCGC.

Dynamics and Equilibria of N Point Charges on a 2D Ellipse or a 3D Ellipsoid

We consider the so-called Thomson problem which refers to finding the equilibrium distribution of a finite number of mutually repelling point charges on the surface of a sphere, but for the case where the sphere is replaced by a spheroid or ellipsoid. To get started, we first consider the problem in two dimensions, with point charges on circles (for which the equilibrium distribution is intuitively obvious) and ellipses. We then generalize the approach to the three-dimensional case of an ellipsoid. The method we use is to begin with a random distribution of charges on the surface and allow each point charge to move tangentially to the surface due to the sum of all Coulomb forces it feels from the other charges. Deriving the proper equations of motion requires using a projection operator to project the total force on each point charge onto the tangent plane of the surface. The position vectors then evolve and find their final equilibrium distribution naturally. For the case of ellipses and ellipsoids or spheroids, we find that multiple distinct equilibria are possible for certain numbers of charges, depending on the starting conditions. We characterize these based on their total potential energies. Some of the equilibria found turn out to represent local minima in the potential energy landscape, while others represent the global minimum. We devise a method based on comparing the moment-of-inertia tensors of the final configurations to distinguish them from one another.

基于Supporting-Ellipsoid方法的自由曲面构造

为了在特定平面上获得任意形式的辐照分布,采用了Supporting-Ellipsoid设计方法来构造自由曲面反射镜。介绍了其设计思想和设计过程,并以具体的设计实例为例构建了自由曲面光学系统。仿真结果表明,在不计反射损失的情况下,系统效率达到了97%,较传统太阳模拟器光学系统提升了3倍以上,不均匀度达到5.26%,与理想状态有一定差距,这是因为设计中兼顾了计算时间和自由曲面光滑性所造成的。

A NOVEL ELLIPSOIDAL ACOUSTIC INFINITE ELEMENT

A novel ellipsoidal acoustic infinite element is proposed. It is based a new pressure representation, which can describe and solve the ellipsoidal acoustic field more exactly. The shape functions of this novel acoustic infinite element are similar to the (Burnett's) method, while the weight functions are defined as the product of the complex conjugates of the shaped functions and an additional weighting factor. The code of this method is cheap to generate as for 1-D element because only 1-D integral needs to be numerical. Coupling with the standard finite element, this method provides a capability for very efficiently modeling acoustic fields surrounding structures of virtually any practical shape. This novel method was deduced in brief and the conclusion was kept in detail. To test the feasibility of this novel method efficiently,in the examples the infinite elements were considered,excluding the finite elements relative. This novel ellipsoidal acoustic infinite element can deduce the analytic solution of an oscillating sphere. The example of a prolate spheroid shows that the novel infinite element is superior to the boundary element and other acoustic infinite elements. Analytical and numerical results of these examples show that this novel method is feasible.

Research on Two-Step Hydro-Bulge Forming of Ellipsoidal Shell with Larger Axis Length Ratio

The two-step hydro-bulge forming technique was proposed to manufacture the ellipsoidal shell with the length ratio of the long axis to the short axis larger than 1.4. A central tube was introduced into the first step of the hydro-bulge forming process to constrain the over growth of the short axis during bulging,and then the central tube was replaced with two polar plates in the second step of the hydro-bulge forming process to manufacture an integral ellipsoidal shell. It is shown that the central tube restricts the growth of the short axis and simultaneously reduces the shrunk tendency of the long axis. The wrinkling occurs due to the latitudinal compressive stress at the equator at the early stage of hydro-bulge forming. However,with the increase of internal pressure,the compressive stress areas gradually decrease and finally the tensile latitudinal stress occupies approximately the whole shell,thus the wrinkles are eliminated. A sound ellipsoidal shell with the axis length ratio of 1.8 is obtained after two-step hydro bulging.

Acoustic characteristics of pulse detonation engine with ellipsoidal reflector

Acoustic characteristics of a pulse detonation engine（PDE） with and without an ellipsoidal reflector are numerically and experimentally investigated. A two-dimensional（2 D） non-splitting unstructured triangular mesh Euler solver based on the space-time conservation element and solution element（CE/SE） method is employed to simulate the flow field of a PDE.The numerical results clearly demonstrate the external flow field of the PDE. The effect of an ellipsoidal reflector on the flow field characteristic near the PDE exit is investigated. The formation process of reflected shock wave and reflected jet shock are reported in detail. An acoustic measurement system is established for the PDE acoustic testing. The experimental results show that the ellipsoidal reflector changes the sound waveform and directivity of PDE sound. The reflected shock wave and reflected jet shock result in two more positive pressure peaks in the sound waveform. The ellipsoidal reflector changes the directivity of PDE sound from 20 to 0. It is found that the peak sound pressure level（PSPL） and overall sound pressure level（OASPL） each obtain an increment when the PDE is installed with a reflector. The maximum relative increase ratio of PSPL and OASPL are obtained at the focus point F2, whose values are 6.1% and 6.84% respectively. The results of the duration of the PDE sound indicate that the reflecting and focusing wave generated by the reflector result in the increment of A duration and B duration before and near focus point F2. Results show that the ellipsoidal reflector has a great influence on the acoustic characteristic of PDE sound. The research is helpful for understanding the influence of an ellipsoidal reflector on the formation and propagation process of PDE sound.

Comparison of Strain Ellipsoid Shape in the South of Ardabil Range (NW), Based on the Results of the Magnetic Susceptibility Anisotropy and Paleostress Methods

In recent years, the method of magnetic survey as one of the new techniques in geological and geophysical studies is known. In this study to determine the shape of the stress field of the two methods, Anisotropy of Magnetic Susceptibility (AMS) and paleostress?have been used. Paleomagnetism is the characteristics of magnetic rocks. Some issues in associated with the past places of continental and oceanic plates can be solved. AMS is one of the paleomagnetism methods that pay to measurement of parameters (which are reflector of the magnetic fabrics rocks). It is presenting an ellipsoid with three-axis perpendicular to each other that defines magnetic ellipsoid. In this regard, the number of 12 stations in different rocks (Jurassic to Quaternary) in the southern region of Ardebil sampling was conducted. In this connection, the study of magnetic fabrics has shown an elliptical magnetic susceptibility with the prolate shape. For the separation of paleostress phases in the Khalkhal area using the analysis of the paleostress based on the study of heterogeneous fault-slip data and sliding lineaments. Firstly, data were picked from 10 stations, and after their analysis, the elliptical shape (prolate) has been determinated. The shape of the ellipsoid, based on AMS and paleostress methods and their results show that in both methods the shape of the stress field is prolate.

THE SCHWARZ LEMMA AT THE BOUNDARY OF THE NON-CONVEX COMPLEX ELLIPSOIDS

Let B2,p :={z∈C2 :|z1|^2 +|z2|^p < 1}(0 < p < 1). Then, B2,p (0 < p < 1) is a non-convex complex ellipsoid in C2 without smooth boundary. In this article, we establish a boundary Schwarz lemma at z0 ∈B2,p for holomorphic self-mappings of the non-convex complex ellipsoid ￡2?, where zq is any smooth boundary point of B2,p.

Anisotropic Force Ellipsoid Based Multi-axis Motion Optimization of Machine Tools

The existing research of the motion optimization of multi-axis machine tools is mainly based on geometric and kinematic constraints, which aim at obtaining minimum-time trajectories and finding obstacle-free paths. In motion optimization, the stiffness characteristics of the whole machining system, including machine tool and cutter, are not considered. The paper presents a new method to establish a general stiffness model of multi-axis machining system. An analytical stiffness model is established by Jacobi and point transformation matrix method. Based on the stiffness model, feed-direction stiffness index is calculated by the intersection of force ellipsoid and the cutting feed direction at the cutter tip. The stiffness index can help analyze the stiffness performance of the whole machining system in the available workspace. Based on the analysis of the stiffness performance, multi-axis motion optimization along tool paths is accomplished by mixed programming using Matlab and Visual C＋＋. The effectiveness of the motion optimization method is verified by the experimental research about the machining performance of a 7-axis 5-linkage machine tool. The proposed research showed that machining stability and production efficiency can be improved by multi-axis motion optimization based on the anisotropic force ellipsoid of the whole machining system.

On the Ellipsoid and Plane Intersection Equation

It is well known that the line of intersection of an ellipsoid and a plane is an ellipse. In this note simple formulas for the semi-axes and the center of the ellipse are given, involving only the semi-axes of the ellipsoid, the componentes of the unit normal vector of the plane and the distance of the plane from the center of coordinates. This topic is relatively common to study, but, as indicated in [1], a closed form solution to the general problem is actually very difficult to derive. This is attemped here. As applications problems are treated, which were posed in the internet [1,2], pertaining to satellite orbits in space and to planning radio-therapy treatment of eyes.

Modeling and Software Development of the Interfacial Transition Zone of Ellipsoidal Aggregate in Cement-Based Composites

The interfacial transition zone (ITZ) between the aggregates and the bulk paste is the weakest zone of ordinary concrete, which largely determines its mechanical and transporting properties. However, a complete understanding and a quantitative modeling of ITZ are still lacking. Consequently, an integrated modeling and experimental study were conducted. First, the theoretical calculation model of the ITZ volume fraction about the rotary ellipsoidal aggregate particles was established based on the nearest surface function formula. Its calculation programs were written based on Visual Basic 6.0 language and achieved visualization and functionalization. Then, the influencing factors of ITZ volume fraction of the ellipsoidal aggregate particles and the overlapping degree between the ITZ were systematically analyzed. Finally, the calculation models of ITZ volume fraction on actual ellipsoidal aggregate were given, based on cobblestones or pebbles particles with naturally ellipsoidal shape. The results indicate that the calculation model proposed is highly reliable.

Visualizing diffusion tensor fields on streamsurfaces with merging ellipsoids

Streamsurfaces in diffusion tensor fields are used to represent structures with pri- marily planar diffusion. So far, however, no effort has been made on the visualization of the anisotropy of diffusion on them, although this information is very important to identify the problematic regions of these structures. We propose two methods to display this anisotropy information. The first one employs a set of merging ellipsoids, which simultaneously character- ize the local tensor details - anisotropy - on them and portray the shape of the streamsurfaces. The weight between the streamsurfaces continuity and the discrete local tensors can be inter- actively adjusted by changing some given parameters. The second one generates a dense LIC （line integral convolution） texture of the two tangent eigenvector fields along the streamsurfaces firstly, and then blends in some color mapping indicating the anisotropy information. For high speed and high quality of texture images, we confine both the generation and the advection of the LIC texture in the image space. Merging ellipsoids method reveals the entire anisotropy information at discrete points by exploiting the geometric attribute of ellipsoids, and thus suits for local and detailed examination of the anisotropy; the texture-based method gives a global representation of the anisotropy on the whole streamsurfaces with texture and color attributes. To reveal the anisotropy information more efficiently, we integrate the two methods and use them at two different levels of details.

Route Height Connection Across the Sea by Using the Vertical Deflections and Ellipsoidal Height Data

Distance between the main land and island is so long that it is very difficult to precisely connect the height datum across the sea with the traditional method like the trigonometric leveling, or it is very expensive and takes long time to implement the height transfer with the geopotential technique. We combine the data of GPS surveying, astro-geodesy and EGM2008 to precisely connect the orthometric height across the sea with the improved astronomical leveling method in the paper. The Qiongzhou Strait is selected as the test area for the height connection over the sea. We precisely determine the geodetic latitudes, longitudes, heights and deflections of the vertical for four points on both sides across the strait. Modeled deflections of the vertical along the height connecting routes over the sea are determined with EGM2008 model based on the geodetic positions and heights of the sea segmentation points from DNSC08MSS model. Differences of the measured and modeled deflections of the vertical are calculated at four points on both sides and linearly change along the route. So the deflections of the vertical along the route over the sea can be improved by the linear interpolation model. The results are also in accord with those of trigonometirc levelings. The practical case shows that we can precisely connect the orthometric height across the Qiongzhou Strait to satisfy the requirement of order 3 leveling network of China. The method is very efficient to precisely connect the height datum across the sea along the route up to 80 km.

Quasi Ellipsoid Gear Surface Reconstruction Based on Meshless Local Petrov-Galerkin Method and Transmission Characteristic

Special transmission 3D model simulation must be based on surface discretization and reconstruction, but special transmission usually has complicated tooth shape and movement, so present software can＇t provide technical support for special transmission 3D model simulation. Currently, theoretical calculation and experimental method are difficult to exactly solve special transmission contact analysis problem. How to reduce calculation and computer memories consume and meet calculation precision is key to resolve special transmission contact analysis problem. According to 3D model simulation and surface reconstruction of quasi ellipsoid gear is difficulty, this paper employes meshless local Petrov-Galerkin （MLPG） method. In order to reduce calculation and computer memories consume, we disperse tooth mesh into finite points--sparseness points cloud or grid mesh, and then we do interpolation reconstruction in some necessary place of the 3D surface model during analysis. Moving least square method （MLSM） is employed for tooth mesh interpolation reconstruction, there are some advantages to do interpolation by means of MLSM, such as high precision, good flexibility and no require of tooth mesh discretization into units. We input the quasi ellipsoid gear reconstruction model into simulation software, we complete tooth meshing simulation. Simulation transmission ratio during meshing period was obtained, compared with theoretical transmission ratio, the result inosculate preferably. The method using curve reconstruction realizes surface reconstruction, reduce simulation calculation enormously, so special gears simulation can be realized by minitype computer. The method provides a novel solution for special transmission 3D model simulation analysis and contact analysis.

The forward and inverse problem of cardiac magnetic fields based on concentric ellipsoid torso-heart model

This paper constructs a concentric ellipsoid torso-heart model by boundary element method and investigates the impacts of model structures on the cardiac magnetic fields generated by both equivalent primary source--a current dipole and volume currents. Then by using the simulated magnetic fields based on torso-heart model as input, the cardiac current sources--an array of current dipoles by optimal constrained linear inverse method are constructed. Next, the current dipole array reconstruction considering boundaries is compared with that in an unbounded homogeneous medium. Furthermore, the influence of random noise on reconstruction is also considered and the reconstructing effect is judged by several reconstructing parameters.

The Ellipsoidal Invariant Set of Fractional Order Systems Subject to Actuator Saturation:The Convex Combination Form

The domain of attraction of a class of fractional order systems subject to saturating actuators is investigated in this paper. We show the domain of attraction is the convex hull of a set of ellipsoids. In this paper, the Lyapunov direct approach and fractional order inequality are applied to estimating the domain of attraction for fractional order systems subject to actuator saturation. We demonstrate that the convex hull of ellipsoids can be made invariant for saturating actuators if each ellipsoid with a bounded control of the saturating actuators is invariant. The estimation on the contractively invariant ellipsoid and construction of the continuous feedback law are derived in terms of linear matrix inequalities(LMIs). Two numerical examples illustrate the effectiveness of the developed method.

The ellipsoidal corrections for boundary value problems of deflection of the vertical with ellipsoid boundary

The boundary value problem of deflections of vertical with ellipsoid boundary is studied in the paper. Based on spherical harmonic series, the ellipsoidal corrections for the boundary value problem are derived so that it can be well solved. In addition, an imitation arithmetic is given for examining the accuracies of solutions for the boundary value problem as well as its spherical approximation problem, and the computational results illustrate that the boundary value problem has higher accuracy than its spherical approximation problem if deflection of the vertical are measured on geoid.

Numerical investigation on motion of an ellipsoidal particle inside confined microcavity flow

The behaviors of a neutrally buoyant ellipsoidal particle in vortical flow confined by a microcavity are numerically studied using the Lattice-Boltzmann method.For specific initial position,an isolated ellipsoid may develop a stable limit cycle orbit inside microcavity due to the interaction between particle and the carrier flow.It is observed that ellipsoidal particles of different shapes exhibit two different stable rotational modes depending on the initial orientation and lateral position.A prolate spheroid tends to enter a tumbling mode whereas an oblate spheroid is apt to achieve a rolling mode.The evolution of rotational velocities along the stable orbit is also analyzed for particles of different shapes.

Global Practical Stabilization of Discrete-Time Switched Affine Systems via a General Quadratic Lyapunov Function and a Decentralized Ellipsoid

This paper addresses the problem of global practical stabilization of discrete-time switched affine systems via statedependent switching rules.Several attempts have been made to solve this problem via different types of a common quadratic Lyapunov function and an ellipsoid.These classical results require either the quadratic Lyapunov function or the employed ellipsoid to be of the centralized type.In some cases,the ellipsoids are defined dependently as the level sets of a decentralized Lyapunov function.In this paper,we extend the existing results by the simultaneous use of a general decentralized Lyapunov function and a decentralized ellipsoid parameterized independently.The proposed conditions provide less conservative results than existing works in the sense of the ultimate invariant set of attraction size.Two different approaches are proposed to extract the ultimate invariant set of attraction with a minimum size,i.e.,a purely numerical method and a numerical-analytical one.In the former,both invariant and attractiveness conditions are imposed to extract the final set of matrix inequalities.The latter is established on a principle that the attractiveness of a set implies its invariance.Thus,the stability conditions are derived based on only the attractiveness property as a set of matrix inequalities with a smaller dimension.Illustrative examples are presented to prove the satisfactory operation of the proposed stabilization methods.

Adjustment Model and Algorithm Based on Ellipsoid Uncertainty

In surveying adjustment models,there is usually some uncertain additional information or prior information on parameters,which can constrain the parameters,and guarantee the uniqueness and stability of parameter solution.In this paper,we firstly use ellipsoidal sets to describe uncertainty,and establish a new adjustment model with ellipsoidal uncertainty.Furthermore,we give a new adjustment criterion based on minimization trace of an outer ellipsoid with two ellipsoid intersections,and analyze the propagation law of uncertainty.Correspondingly,we give a new algorithm for the adjustment model with ellipsoid uncertainty.Finally,we give three examples to test and verify the effectiveness of our algorithm,and illustrate the relation between our result and the weighted mixed estimation.