Laboratory Life:Twenty Years of Experimental Research with Locals and New Comers in Remote Rural Areas

Through the Latour concept of philosophy of science of laboratory life,the life course of a(geo)ethnographer researcher is analyzed,in order to establish the emotional or more personal dimensions that do not usually appear in research papers,but that have notable relevance in qualitative research.The text is structured in three large parts:A conceptual vision of the new experimental geography;the experimental geo-ethnography in old social,new social and place scenarios;and finally,the most personal and emotional dimension of the research.The first part establishes the geo-ethnographic experimental context and the assumptions in fieldwork,in addition to the geo-ethnographic reconciliation process.In the second part,the main qualitative research problems related to mobility,resistance and dynamics in place are established.Finally,in the third part the research perceptions,the personal experiences,and the emotional dimension of the research in remote rural areas are established.The laboratory life of a researcher,allows one to establish scalar conclusions and rigor in qualitative research.

EXPERIMENTAL RESEARCH ON THE ANTI-CANCER IMMUNOMODULA-TIVE EFFECT OF THE POLYSOCOHARIBE-PEPTIDE OF CORIOLUS VERSICOLOR

Polysocoharibe-peptide of Coriolus Versicolor (PSP) is a new anti-cancer immunomodulative drug. The present paper reports on the experimental research done with this drug. It was found that PSP had the ability to recover hemolysin HC50, to increase the weight of the thymus, and increase the alexin of serum C3 and the IgG content of tumor bearing mice. FSP also significantly raised the pha-gocytic activity of macrophages in normal mice. PSP had a significant inhibitory effect on P38S and S180 cells. At the concentration of 1 mg/ml, PSP inhibited the proliferating activity of some human tumor call lines, such as SGC 7901, SPC, SLY and Mei. It had a direct toxic effect on SPC cells. PSP significantly inhibited the synthesis of nucleic acids of Ehrlich ascites carcinoma cells. In addition, PSP was antagonistic to the side effects of chemotherapy and radiotherapy.

Experimental Research on Lower Hybrid Current Drive in Superconducting Tokamak HT-7

?Fundamental experiments on lower hybrid current drive (LHCD) have been undertaken on HT-7 superconducting tokamak. The experiments on LHCD efficiency reveal its depen- deuce on plasma density and the toroidal magnetic field. Furthermore, the experiments on HT-7 successfully demonstrate the ability for LHCD to sustain long pulse tokamak discharges, such as discharges with full non-inductive current drive for several seconds. The experimental study to improve plasma confinements by LHCD suggests that the improvement should be due to the change o f current profile. It has also been demonstrated by the experiments that the lower hybrid wave may lead to an enhanced ionization of particles in the region where the wave is deposited.

EXPERIMENTAL RESEARCH AND DESIGN ON HEAT TRANSFER OF EVAPORATOR USED IN THE LARGE QUICK FREEZE PLANT

The evaporator is the main part of a quick-freeze equipment. There are many factors influencing the heat transfer coefficient of an evaporator. The most important factors among them are the fin shape, tube diameter, distance of fin space, frost, and velocity of air flow etc. They mainly influence the thermal efficiency of an evaporator, and therefore its thermal efficiency has direct relationship with the whole efficiency of the quick freeze plant. Evaporators with different structural types have different heat transfer efficiency, in order to obtain high efficiency structure of evaporator, 8 evaporator models with different fin shape, tube diameter and tube arrangement are analyzed and compared. The calculation results show that the integral waved fins, equilateral-triangle arranged small diameter tubes and varying fin-spacing has the highest heat transfer coefficient. The experimental result also shows that the evaporator with this type of structure has better thermal efficiency. The experimental result is in good agreement with the calculation result, it can instruct engineering design for usual designer. A real quick-freeze equipment is designed and put into production. The result shows that, compared with traditional domestic quick-freeze equipments, this equipment decreases by 40% in size and by 20% in energy consumption.

Calculated and Experimental Research of Sheet Resistances of Laser-Doped Silicon Solar Cells

The calculated and experimental research of sheet resistances of crystalline silicon solar cells by dry laser doping is investigated. The nonlinear numerical model on laser melting of crystalline silicon and liquid-phase diffusion of phosphorus atoms by dry laser doping is analyzed by the finite difference method implemented in MATLAB. The melting period and melting depth of crystalline silicon as a function of laser energy density is achieved. The effective liquid-phase diffusion of phosphorus atoms in melting silicon by dry laser doping is confirmed by the rapid decrease of sheet resistances in experimental measurement. The plateau of sheet resistances is reached at around 15 Ω/. The calculated sheet resistances as a function of laser energy density is obtained and the calculated results are in good agreement with the corresponding experimental measurement. Due to the successful verification by comparison between experimental measurement and calculated results, the simulation results could be used to optimize the virtual laser doping parameters.

Experimental Research of Hexagon Multihole Armour Block on Breakwater

This paper introduces a new kind of armour block - hexagon multihole block on sloping breakwater. It has great characteristics such as good interlocking, strong resistance against waves and saving concrete. Through the hydraulic model test, the mechanism of stability of the block has been proved and the relations between stability and wave height, wave period, water depth, slope, laying method, porosity and cushion have been found. The effect of weight on steadiness have also been discovered. Finally, the method of design and some formulas are given.

Biomimetic Experimental Research on Hexapod Robot's Locomotion Planning

To provide hexapod robots with strategies of locomotion planning, observation experiments were operated on a kind of ant with the use of high speed digital photography and computer assistant analysis. Through digitalization of original analog video, locomotion characters of ants were obtained, the biomimetic foundation was laid for polynomial trajectory planning of multi-legged robots, which was deduced with mathematics method. In addition, five rules were concluded, which apply to hexapod robots marching locomotion planning. The first one is the fundamental strategy of multi-legged robots＇ leg trajectory planning. The second one helps to enhance the static and dynamic stability of multi-legged robots. The third one can improve the validity and feasibility of legs＇ falling points. The last two give criterions of multi-legged robots＇ toe trajectory figures and practical recommendatory constraints. These five rules give a good method for marching locomotion planning of multi-legged robots, and can be expended to turning planning and any other special locomotion.

An Experimental Research to Study the Microwaves transmission Characteristics of Ablating Material in Arc-Heated Plasma Flow

in this paper, an experimental research the effect of ablating material on the reflection and the transmission of microwaves in arc-heated plasma flow is presented by using the C band microwave measuring system. The results show that the ablating material with accidented surface and its high temperature have remarkably affected the reflection and the transmission of microwaves. The experiment proves that the system has outstanding precision and reliability.

To promote new energy development by top experimental research

Mr.Liu Zhenya,general manager of the State Grid and Mr.Fu Zhifang,executive vice governor of Hebei Province together with their colleagues jointly inspected the development of new energy project in Zhangbei County,Zhangjiakou City,Hebei Province.

Experimental and numerical studies of Ca(OH)_(2)/CaO dehydration process in a fixed-bed reactor for thermochemical energy storage

The Ca(OH)_(2)/CaO thermochemical energy storage(TCES)system based on calcium looping has received extensive attention owing to its high energy storage density,prolonged energy storage time,and environmental friendliness.The heat storage process of the Ca(OH)_(2)/CaO TCES system in a mixed heating reactor was evaluated in this study,by employing a combination of direct and indirect heating modes.The dehydration process was studied experimentally,and a numerical model was established and verified based on the experimental results.The dehydration behavior of 500 g of Ca(OH)_(2) powder was investigated in a fixed-bed reactor with mixed heating.The experimental and simulation results indicated that mixed heating causes combined centripetal and horizontal propulsion.Heat input is the main limiting factor in the heat storage process,because the radial advance of the reaction is hindered by the low thermal conductivity of the solid reactant particles.Heat transmission partitions were added to enhance the performance of the reactor.The performance of the modified reactor was compared with that of a conventional reactor.The radial heat transmission partitions in the modified reactor effectively enhance the energy storage rate and reduce the reaction time by 59.5%compared with the reactor without partitions.

Research on seismic performance of shear walls with concrete filled steel tube columns and concealed steel trusses

In order to further improve the seismic performance of RC shear walls, a new composite shear wall with concrete filled steel tube （CFT） columns and concealed steel trusses is proposed. This new shear wall is a double composite shear wall; the first composite being the use of three different force systems, CFT, steel truss and shear wall, and the second the use of two different materials, steel and concrete. Three 1/5 scaled experimental specimens： a traditional RC shear wall, a shear wall with CFT columns, and a shear wall with CFT columns and concealed steel trusses, were tested under cyclic loading and the seismic performance indices of the shear walls were comparatively analyzed. Based on the data from these experiments, a thorough elastic-plastic finite element analysis and parametric analysis of the new shear walls were carried out using ABAQUS software. The finite element results of deformation, stress distribution, and the evolution of cracks in each phase were compared with the experimental results and showed good agreement. A mechanical model was also established for calculating the load-carrying capacity of the new composite shear walls. The results show that this new type of shear wall has improved seismic performance over the other two types of shear wails tested.

Electronic Unit Pump Test Bench Development and Pump Properties Research

A unit pump test bench is developed on an in-line pump test platform. The bench is composed of pump adapting assembly, fuel supply subsystem, lubricating subsystem and a control unit. A crank angle domain injection control method is given out and the control accuracy can be 0.1° crank degree. The bench can test both mechanical unit pump and electronic unit pump. A test model-PLD12 electronic unit pump is tested. Full pump delivery map and some influence factors test is done. Experimental results show that the injection quantity is linear with the delivery angle. The quantity change rate is 15% when fuel temperature increases 30 ℃. The delivery quantity per cycle increases 30 mg at 28 V drive voltage. The average delivery difference for two same type pumps is 5 %. Test results show that the bench can be used for unit pump verification.

Experimental investigation of high temperature thermal contact resistance with interface material

Thermal contact resistance plays a very important role in heat transfer efficiency and thermomechanical coupling response between two materials,and a common method to reduce the thermal contact resistance is to fill a soft interface material between these two materials.A testing system of high temperature thermal contact resistance based on INSTRON 8874 is established in the present paper,which can achieve 600 C at the interface.Based on this system,the thermal contact resistance between superalloy GH600 material and three-dimensional braid C/C composite material is experimentally investigated,under different interface pressures,interface roughnesses and temperatures,respectively.At the same time,the mechanism of reducing the thermal contact resistance with carbon fiber sheet as interface material is experimentally investigated.Results show that the present testing system is feasible in the experimental research of high temperature thermal contact resistance.

Integrating beneficiaries into assessment of ecosystem services from managed forests at the Hubbard Brook Experimental Forest,USA

Background：Forests contribute to human wellbeing through the provision of important ecosystem services.Methods：In this study,we investigated how the perceived importance of ecosystem services may impact the overall benefit provided by managed watersheds at the Hubbard Brook Experimental Forest over a 45-year period,using standardized measures of service capacity weighted by service importance weights derived from a survey of beneficiaries.Results：The capacity of watersheds to regulate water flow and quality was high in all watersheds throughout the study period,whereas cultural services such as scenic beauty declined after harvest.Impacts on greenhouse gas regulation depended on the efficiency with which harvested biomass was used.Surveys revealed that stakeholders placed high value on all ecosystem services,with regulating and cultural services seen as more important than provisioning services.When service metrics were weighted by survey responses and aggregated into a single measure,total service provision followed the same overall trend as greenhouse gas regulation.Where biomass use was less efficient in terms of greenhouse gas emissions,harvesting resulted in an overall ＂ecosystem service debt＂;where use was more efficient,this ＂ecosystem service debt＂ was reduced.Beneficiaries＇ educational backgrounds significantly affected overall assessment of service provision.Beneficiaries with college or university degrees incurred smaller ＂ecosystem service debts＂ and were less negatively affected by harvesting overall.Conclusions：This study highlights the importance of including empirical measures of beneficiary preference when attempting to quantify overall provision of ecosystem services to human beneficiaries over time.

Simulation and Experimental Study on Influence of Multi⁃port Integrated Hydraulic Transformer Port Number on Transformer Ratio Characteristics

The integrated hydraulic transformer has a compact structure and no throttling loss in the process of pressure regulation.It is widely used in the common pressure rail hydrostatic transmission system.The integrated hydraulic transformer is realized by designing more than three ports on the distribution plate,and the voltage transformation characteristics of the integrated hydraulic transformer with different port numbers are different.In this paper,the influence of port number on the pressure ratio of integrated hydraulic transformer was studied,and the pressure ratio characteristics of 3⁃ports,4⁃ports,and 5⁃ports integrated hydraulic transformer were obtained,and an experimental platform was built for experimental verification,which shows that the simulation results are consistent with the experimental results and provides a theoretical basis for the design of integrated hydraulic transformer.

Excitation of chorus-like waves by temperature anisotropy in dipole research experiment (DREX): A numerical study

Due to their significant roles in the radiation belts dynamics, chorus waves are widely investigaled in observations, experiments, and simulations. In this paper, numerical studies for the generation of chorus-like waves in a launching device, dipole research experiment （DREX）, are carried out by a hybrid code. The DREX plasma is generated b} electron cyclotron resonance （ECR）, which leads to an intrinsic temperature anisotropy of energetic electrons. Thus the whistler instability can be excited in the device. We then investigate the effects of three parameters, i.e., the cold plasma density no, the hot plasma density nh, and the parallel thermal velocity of energetic electrons, on the generation of chorus-like waves under the DREX design parameters. It is obtained that a larger temperature anisotropy is needed to excite chorus-like waves with a high nc with other parameters fixed. Then we fix the plasma density and parallel thermal velocity, while varying the hot plasma density. It is found that with the increase of nh, the spectrum of the generated waves changes from no chorus elements, to that with several chorus elements, and then further to broad-band hiss-like waves. Besides, different structures of chorus- like waves, such as rising-tone and/or falling-tone structures, can be generated at different parallel thermal velocities in the DREX parameter range.

Research Progress and Analysis of Moxibustion in Prevention and Treatment of Acute Infectious Diseases

To introduce and evaluate current research progress of moxibustion in the prevention and treatment of acute infectious diseases,related literature in CNKI,Wanfang Data,and SinoMed was retrieved and analyzed by the present study.Results showed abundant studies on the mechanism of action of moxibustion in the prevention and treatment of acute infectious diseases with remarkable clinical efficacy.The present study also summarizes the commonly-occurring problems and found out the deficiencies in existing studies in hope of providing more reference for further research.

Research Progress and Analysis of Moxibustion in Prevention and Treatment of Acute Infectious Diseases

To introduce and evaluate current research progress of moxibustion in the prevention and treatment of acute infectious diseases,related literature in CNKI,Wanfang Data,and SinoMed was retrieved and analyzed by the present study.Results showed abundant studies on the mechanism of action of moxibustion in the prevention and treatment of acute infectious diseases with remarkable clinical efficacy.The present study also summarizes the commonly-occurring problems and found out the deficiencies in existing studies in hope of providing more reference for further research.

Experimental Study of Vertical Two-dimensional Diffusion Concentration Distribution in Sloped Wave Bank Angular Field

[Objectives] This study was conducted to detect the two-dimensional diffusion concentration distribution from sloped wave bank. [Methods] Diffusion experiments of instantaneous line source discharge were carried out using two sloped wave banks with different inclination angles based on the developed two-dimensional diffusion tank device for sloped wave banks by the apex discharge method under grid oscillation frequencies n=15, 20, 40 and 60 r/min. The image acquisition and digital image processing techniques were applied to measure the two-dimensional concentration field distribution and to analyze the distribution laws of the pollutant in the angular field. [Results] The diffusion of the pollutant in the sloped wave bank area became faster with the increase of the grid oscillation frequency, and the pollution range became wider with the diffusion time. The point concentration of the pollutant at the water surface monotonically decreased with the increase of the abscissa, and the vertical concentration distribution decreased with the increase of water depth. The transverse diffusion rate of the pollutant in water was greater than the vertical diffusion rate, and its concentration distribution exhibited a distribution characteristic of farther diffusion in the adjacent area on the water surface. The diffusion experiment area of the sloped wave bank at θ=30° had a higher concentration of the pollutant at each point compared with the diffusion experiment of the sloped bank at θ=45°, under the same experimental conditions. A large-scale vortex appeared near the sloped wave bank at θ=45° during the experiment, and the presence of the vortex made the concentration distribution of the pollutant in the direction along the bank slope first decrease and then increase, while no obvious vortex was observed near the sloped wave bank at θ=30°, and the concentration of the pollutant decreased monotonously along the bank slope direction. [Conclusions] This study is of great significance for the concentration distribution laws and the lateral and vertical diffusion coefficients of side discharge at complex bank slopes and river banks.