A Single Mooring System with Sag-Extensibility and Flexural Rigidity Applied to Offshore Platform

Floating platform system has been extensively used in ocean exploitation, particularly for a tension-leg platform （TLP） system in deep water. Most of the TLPs are multi-mooring systems, where multi-joints are connected to the tension-legs so that the platform is not allowed to twist freely and may subject to enormous force induced by large incident waves in the weak-direction of the structure. This study aims to exploit a single moored offshore platform system that may attract less force and can be operated with less effort. In our analysis, in addition to mechanical properties of the tether, two important properties are also taken into consideration for the single mooring tether with expanded cross sectional dimension and utilization of stronger material, namely, the sag-extensibility and the flexural rigidity. Finally, the dynamic structural behavior produced by the mechanical effects on the new system is investigated and compared with that of traditional design while the wave-structure interactions of large body are also accounted for. Our study finds that the neglect of sag-extensibility or the flexural rigidity of large, strong mooring cable may result in a conservative but not necessarily safe design.

A STUDY OF SEAM STRENGTH AND EXTENSIBILITY FOR PRESSURE GARMENTS

Pressure garments are functional garments designed for medical purposes and arc normally used under prolonged stress. The stress across seams is related to the size of the wearer and the fit and the garment, the more close fitting a garment, the greater stress is put on the seam. Since pressure garments are subjected to appreciable stress during wear, seams with the required strength and extensiblity are particular important.The seam type, stitch type, stitch density and thread strength are the main factors determining the strength and extensibility of a seam. In this paper, investigation of seam strength and extensibility are made on four types of seams which have been used for making pressure garments. Five different types of stitch densities and two sizes of sewing thread are used on each type of scam to be tested. The seaming conditions of the selected fabric are also examined.

Origin of nucleation and growth of extension twins in grains unsuitably oriented for twinning during deformation of Mg-1%Al

A large number of anomalous extension twins,with low or even negative twinning Schmid factors,were found to nucleate and grow in a strongly textured Mg-1Al alloy during tensile deformation along the extruded direction.The deformation mechanisms responsible for this behaviour were investigated through in-situ electron back-scattered diffraction,grain reference orientation deviation,and slip trace-modified lattice rotation.It was found that anomalous extension twins nucleated mainly at the onset of plastic deformation at or near grain boundary triple junctions.They were associated with the severe strain incompatibility between neighbour grains as a result from the differentbasal slip-induced lattice rotations.Moreover,the anomalous twins were able to grow with the applied strain due to the continuous activation ofbasal slip in different neighbour grains,which enhanced the strain incompatibility.These results reveal the complexity of the deformation mechanisms in Mg alloys at the local level when deformed along hard orientations.

Diagnostic Study of an Extreme Explosive Cyclone over the Kuroshio/Kuroshio Extension Region

Explosive cyclones(ECs)occur frequently over the Kuroshio/Kuroshio Extension region.The most rapidly intensified EC over the Kuroshio/Kuroshio Extension region during the 42 years(1979-2020)of cold seasons(October-April)was studied to reveal the variations of the key factors at different explosive-developing stages.This EC had weak low-level baroclinicity,mid-level cyclonic-vorticity advection,and strong low-level water vapor convergence at the initial explosive-developing stage.The low-level baroclinicity and mid-level cyclonic-vorticity advection increased substantially during the maximum-deepening-rate stage.The diagnostic analyses using the Zwack-Okossi equation showed that diabatic heating was the main contributor to the initial rapid intensification of this EC.The cyclonic-vorticity advection and warm-air advection enhanced rapidly in the middle and upper troposphere and contributed to the maximum rapid intensification,whereas the diabatic heating weakened slightly in the mid-low troposphere.The relative contribution of the diabatic heating decreased from the initial explosive-developing stage to the maximum-deepening-rate stage due to the enhancement of other factors(the cyclonic-vorticity advection and warm-air advection).Furthermore,the physical factors contributing to this EC varied with the explosive-developing stage.The non-key factors at the initial explosive-developing stage need attention to forecast the rapid intensification.

Anisotropic FCGR behaviour in hot-rolled Mg-3Al-0.5Ce alloy

In this work,anisotropic fatigue crack growth rate(FCGR)behaviour in a hot-rolled Mg-3wt%Al-0.5wt%Ce alloy was investigated using compact tension(CT)specimens with notch(an)parallel to the rolling direction(RD)and transverse direction(TD).The FCGR tests were conducted at a constant load ratio(R=0.1)and maximum stress intensity factor(KMax=15.6 MPa√m)to investigate the crack closure effect.For both constant R and KMax conditions:(i)the load-displacement curves for every loading cycle were linear for a_(n)∥ to RD and TD,indicating no crack closure;(ii)the FCGR was found to be lower for an∥RD than an∥TD over the entire stress intensity factor range(△K).The hot-rolled sample contained long-aligned Al11Ce3 intermetallic phase within grain boundaries that are elongated along RD.During the FCGR test,{10.12}<10.11>extension twins(ET)with lamellae∼⊥and c-axis∼∥to these elongated intermetallics along RD developed irrespective of the notch orientation.During the loading cycle,these intermetallics along RD generate back-stresses,reducing the in-plane tensile stress∼||and∼⊥to crack-tip to∼0 for a_(n)∥to RD and TD,respectively.Hence,lenticular ET∼||⊥and∼||,with c-axis∼||and∼⊥to crack path activates,leading to trans and inter lamellar crack for anto RD and TD,respectively,and anisotropic FCGR.Translamellar crack in a_(n)∥RD reduces the FCGR due to plastic energy dissipation as perceived by comparatively more geometrically necessary boundaries(GNBs).On the other hand,faster FCGR was obtained for a_(n)∥TD due to interlamellar cracking.Thus,the crack growth through the matrix-ET interfaces was favoured due to strain incompatibility.The Fractography for a_(n)∥RD shows smaller elongated grooves along crack propagation,which indicates crack arrest.However,larger elongated grooves for a_(n)||TD indicated easy crack propagation due to favourable interlamellar crack.

Clinical analysis of colistin sulfate in the treatment of pneumonia caused by carbapenem-resistant Gram-negative bacteria

BACKGROUND Multidrug-resistant Gram-negative bacteria,exacerbated by excessive use of antimicrobials and immunosuppressants,are a major health threat.AIM To study the clinical efficacy and safety of colistin sulfate in the treatment of carbapenem-resistant Gram-negative bacilli-induced pneumonia,and to provide theoretical reference for clinical diagnosis and treatment.METHODS This retrospective analysis involved 54 patients with Gram-negative bacilli pneumonia admitted to intensive care unit of The General Hospital of the Northern Theater Command of the People's Liberation Army of China from August 2020 to June 2022.After bacteriological culture,the patients'airway secretions were collected to confirm the presence of Gram-negative bacilli.The patients were divided into the experimental and control groups according to the medication used.The research group consisted of 28 patients who received polymyxin sulfate combined with other drugs through intravenous,nebulization,or intravenous combined with nebulization,with a daily dosage of 1.5–3.0 million units.The control group consisted of 26 patients who received standard dosages of other antibiotics(including sulbactam sodium for injection,cefoperazone sodium sulbactam for injection,tigecycline,meropenem,or vaborbactam).RESULTS Of the 28 patients included in the research group,26 patients showed improvement,treatment was ineffective for two patients,and one patient died,with the treatment efficacy rate of 92.82%.Of the 26 patients in the control group,18 patients improved,treatment was ineffective for eight patients,and two patients died,with the treatment efficacy rate of 54.9%;significant difference was observed between the two groups(P<0.05).The levels of white blood cell(WBC),procalcitonin(PCT),and C-reactive protein(CRP)in both groups were significantly lower after treatment than before treatment(P<0.05),and the levels of WBC,PCT,and CRP in the research group were significantly lower than those in the control group(P<0.05).Compared with before treatment,there were no significant changes in aspartate aminotransferase,creatinine,and glomerular filtration rate in both groups,while total bilirubin and alanine aminotransferase decreased after treatment(P<0.05)with no difference between the groups.In patients with good clinical outcomes,the sequential organ failure assessment(SOFA)score was low when treated with inhaled polymyxin sulfate,and specific antibiotic treatment did not improve the outcome.Sepsis and septic shock as well as a low SOFA score were independent factors associated with good clinical outcomes.CONCLUSION Polymyxin sulfate has a significant effect on the treatment of patients with multiple drug-resistant Gram-negative bacilli pneumonia and other infections in the lungs and is safe and reliable.Moreover,the administration route of low-dose intravenous injection combined with nebulization shows better therapeutic effects and lower adverse reactions,providing new ideas for clinical administration.

SUPERIOR TENSILE EXTENSIBILITY OF PETG/PC AMORPHOUS BLENDS INDUCED VIA UNIAXIAL STRETCHING

A simultaneous increase of both stiffness and extensibility ofpoly（ethylene glycol-co-cyclohexane-1,4-dimethanol terephthalate） （PETG）/polycarbonate （PC） blends prepared through the slit die extrusion-uniaxial cold stretching process was observed. The stretched sheets have a unique mechanical character that an increased tensile modulus is accompanied by an increased extensibility with increasing the draw ratio. Especially, a sharp increasing of the extensibility is observed for PETG/PC （70/30 wt%） blends at draw ratios between 8.2 and 20.0, where a nine times increase of extensibility is achieved. The mechanism of stretching-induced superior extensibility is investigated via micrograph observation, rheometry and calorimetric analysis. The observed superior extensibility could be tentatively explained by the bridging effect of the PC microfibrils on the crack development during tensile failure.

The Origin of Mesozoic A-type Granitoids,Fujian Province,Southeast China:Insights from Geochronology,Mineralogy and Geochemistry

The magma sources,origins and precise forming ages of the miarolite from Qishan and Kuiqi intrusions are still uncertain.New results reveal that,miarolites from the Qishan and Kuiqi intrusions yield crystallization ages of~101 and~98 Ma,and they have a high formation temperature(~910℃)and low oxygen fugacity value,indicating crystallization condition at low pressure in the upper crust with temperature of 678℃.The Qishan and Kuiqi miarolites are characterized by enrichment in SiO_(2) and high-K alkali,depletion in Ca and Mg,and belong to the high-K weak peraluminous rock series.The samples are enriched in HFSEs(i.e.,Ta,Zr and Hf)and LILEs(i.e.,Ba,P and Sr),depleted in Ba and Sr with the negative anomaly of Eu.In the primitive mantle normalized trace element spider diagram,the samples show a right-inclined‘seagull-type’pattern,combined the ratios of(La/Yb)_(N),10000×Al/Ga,Rb/Nb and Nb/Ta etc.,they were proved to be alkaline A-type granite.Combined the characterize of the trace elements,they were derived from clay-rich source accompanied pelite melting,and subjected to K-feldspar crystallization fractional.The values of ε_(Hf)(t)and tDM2 are distributed in the range of-2.8 to 3.3 with~1.2 Ga,and-6.0 to 4.0 with~1.2 Ga,revealing that they were generated from the Mesoproterozoic Cathaysia basement rocks.The comprehensive research reveals the Kuiqi and Qishan intrusions derived from crust-mantle mixing and partial melting of the crust,respectively,resulting from lithospheric extension generated by the Paleo-Pacific Plate subducted into the European-Asian Plate.

Phanerozoic Tectonic Evolution,Metallogenesis and Formation of Mineral Systems in China

The continental Asia is mainly composed of three major tectonic regimes,the Tethys,Paleo Asian Ocean,and West Pacific.It underwent multi-stage plate convergences,ocean-continent transformations,and subductions,collisions and/or collages,and post collisional(orogenic)extensions in Phanerozoic.Tectonic evolution of the Asia brings up a unique fault system and tectonic geomorphological features in the China's Mainland.Also,it provides a geodynamic background for the formation and evolution of metallogeneses and mineral systems,resulting in nonuniform distribution of tectono-metallogenic systems and metallogenic belts.The spatiotemporal distribution of mineral deposits in China and adjacent areas exhibits periodic variation under controlling of the full life Wilson cycle and tectonic evolution,forming the plate convergence-related mineral system in East Asia.Porphyry Cu deposits are mainly related to compressional systems in Paleozoic and early Mesozoic,and more closely related to post-collision extensional settings in late Mesozoic and Cenozoic.Orogenic Au deposits mainly formed in post-orogeny extensional setting.Alkaline rock related rare earth element deposits formed mainly at margins of the North China and Yangtze cratons.Granite-pegmatite Li and other rare metal deposits formed mainly in early Mesozoic,related to Indosinian post-orogeny extension.Tectono-metallogenic systems provide important basis for the prospecting of mineral resources.

GUIDE FOR AUTHORS

Articlen ■Article types Articles commonly fall into one of three main categories:Fulllength articles,Review articles and Short communications.Full-length articles are original,unpublished primary research.Extensions of work that has been published previously in short form such as a Communication are usually acceptable.

GUIDE FOR AUTHORS

Article Article types Articles commonly fall into one of three main categories:Fulllength articles,Review articles and Short communications.Full-length articles are original,unpublished primary research.Extensions of work that has been published previously in short form such as a Communication are usually acceptable.Short communications must contain original and highly significant work whose high novelty warrants rapid publication.Review articles may be an authoritative overview of a field,a comprehensive literature reviews,or tutorial-style reference materials.Reviews are usually invited by the editor,but a topic may be proposed by an author via the editorial office.

GUIDE FOR AUTHORS

Article Article types Articles commonly fall into one of three main categories:Full-length articles,Review articles and Short communications.Full-length articles are original,unpublished primary research.Extensions of work that has been published previously in short form such as a Communication are usually acceptable.

Unveiling the rolling texture variations ofα-Mg phases in a dual-phase Mg-Li alloy

LZ91 Mg-Li alloy plates with three types of initial texture were rolled by 70%reduction at both room temperature and 200℃to explore the rolling texture formation ofα-Mg phase.The results showed that the rolling texture is largely affected by the initial texture.All the samples exhibited two main texture components as RD-split double peaks texture and TD-split double peaks texture after large strain rolling.The intensity of the two texture components was strongly influenced by the initial orientation and rolling temperature.Extension twinning altered the large-split non-basal orientation to a near basal one at low rolling strain.The basal orientation induced by twinning is unstable,which finally transmitted to the RD-split texture.The strong TD-split texture formed due to slip-induced orientation transition from its initial orientation.The competition between prismatic and basal slip determined the intensity and tilt angle of the TD-split texture.By increasing the rolling temperature,the TD-split texture component was enhanced in all three samples.Limitation of extension twinning behavior and the promotion of prismatic slip at elevated temperature are the main reasons for the difference in hot and cold rolling texture.

Surface crack evolution patterns in freeze-thaw damage of fissured rock bodies

To explore the effects of freeze‒thaw cycles on the mechanical properties and crack evolution of fissured sandstone,biaxial compression experiments were carried out on sandstone subjected to freeze‒thaw cycles to characterize the changes in the physical and mechanical properties of fissured sandstone caused by freeze‒thaw cycles.The crack evolution and crack change process on the surface of the fissured sandstone were recorded and analysed in detail via digital image technology(DIC).Numerical simulation was used to reveal the expansion process and damage mode of fine-scale cracks under the action of freeze‒thaw cycles,and the simulation results were compared and analysed with the experimental data to verify the reliability of the numerical model.The results show that the mass loss,porosity,peak stress and elastic modulus all increase with increasing number of freeze‒thaw cycles.With an increase in the number of freeze‒thaw cycles,a substantial change in displacement occurs around the prefabricated cracks,and a stress concentration appears at the crack tip.As new cracks continue to sprout at the tips of the prefabricated cracks until the microcracks gradually penetrate into the main cracks,the displacement cloud becomes obviously discontinuous,and the contours of the displacement field in the crack fracture damage area simply intersect with the prefabricated cracks to form an obvious fracture.The damage patterns of the fractured sandstone after freeze‒thaw cycles clearly differ,forming a symmetrical"L"-shaped damage pattern at zero freeze‒thaw cycles,a symmetrical"V"-shaped damage pattern at 10 freeze‒thaw cycles,and a"V"-shaped damage pattern at 20 freeze‒thaw cycles.After 20 freeze‒thaw cycles,a"V"-shaped destruction pattern and"L"-shaped destruction pattern are formed;after 30 freeze‒thaw cycles,an"N"-shaped destruction pattern is formed.This shows that the failure mode of fractured sandstone gradually becomes more complicated with an increasing number of freeze‒thaw cycles.The effects of freeze‒thaw cycles on the direction and rate of crack propagation are revealed through a temperature‒load coupled model,which provides an important reference for an in-depth understanding of the freeze‒thaw failure mechanisms of fractured rock masses.

Longitudinally extensive transverse myelitis associated with scrub typhus:A case report

Rationale:Longitudinally extensive transverse myelitis(LETM)is a rare inflammatory demyelinating disease predominantly associated with autoimmune and inflammatory disorders.Scrub typhus can cause a variety of neurological complications,which may result in poor recovery and long-term disability.This report reveals a rare linkage between LETM and scrub typhus.Patient concerns:A 24-year-old female presented with a history of fever for 10 days associated with progressive quadriparesis.Physical examination revealed bilateral lower limb weakness(grade 0/5)and bilateral upper limb weakness(grade 2/5)with reduced sensation below the T3 dermatome.Diagnosis:Scrub typhus presenting with longitudinally extensive transverse myelitis.Interventions:Steroid pulse therapy with antibiotics supported by early intensive rehabilitation.Outcomes:Complete recovery was achieved.Lessons:This case report highlights the importance of considering scrub typhus as a potential cause of LETM in endemic regions,particularly in patients presenting with febrile illness and neurological symptoms.

Wellbore Cleaning Degree and Hydraulic Extension in Shale Oil Horizontal Wells

The efficient development and exploitation of shale oil depends on long-distance horizontal wells. As the degreeof cleaning of the wellbore plays a key role in these processes, in this study, this problem is investigated experimentallyby focusing on the dimensionless cuttings bed height. A method is proposed to calculate the horizontalwellhydraulic extension taking into account the influence of the wellbore cleaning degree on the wellborepressure distribution and assess the effect of a variety of factors such as the bottom hole pressure, the circulatingpressure drop, the drilling pump performance and the formation properties. The analysis shows that the hydraulicextension of horizontal wells decreases with an increase in the cuttings bed height, and the higher the displacementof drilling fluid, the faster the hydraulic extension declines. The annular pressure drop of the horizontalsection increases with the increase of the cuttings bed height, resulting in a higher bottom-hole pressure. Severalarguments are provided to guide the safe drilling of shale oil horizontal wells and overcome the limits of currenttechnological approaches.

Fish Gelatin-Based Film Containing Maillard Reaction Products:Properties and Its Use as Bag for Packing Chicken Skin Oil

Maillard reaction is a non-enzymatic browning reaction and its products(MRPs)have been proven to possess antioxidant properties.This research aimed to produce a fish gelatin-based packaging incorporated with MRPs to retard lipid oxidation in chicken skin oil(CSO)during storage at ambient temperature(28℃–30℃).MRPs produced from fish gelatin and fructose(1:1,90℃,pH 11)showed the highest antioxidant properties compared to those prepared under other conditions.Different glycerol/MRPs ratios(30:0,25:5,20:10,15:15,10:20,5:25,0:30)were incorporated into the film and resulting films were characterized.Glycerol/MRPs at 10:20 ratio was chosen to add into the film prior to bag preparation via heat sealing method.CSO packed in the bag was monitored for lipid hydrolysis and oxidation during 15 days of storage(30℃±0.5℃,RH 52%±5%).After 15 days,quality deterioration was lower in CSO packed in the prepared gelatin bag as evidenced by lower FFA,TBARS,and volatile compounds in comparison with CSO packed in LDPE bag.Fish gelatin film added with MRPs possessed an excellent water vapor barrier property(WV-BP).This finding indicated that MRPs could be used to substitute glycerol and simultaneously could serve as antioxidants for the developed active bag.The novel packaging can be a potential alternative packaging for retarding lipid oxidation of lipid or fatty foods.

Integrated design and control technology of liner completion and drilling for horizontal wells

Aiming at the problems of large load of rotation drive system,low efficiency of torque transmission and high cost for operation and maintenance of liner steering drilling system for the horizontal well,a new method of liner differential rotary drilling with double tubular strings in the horizontal well is proposed.The technical principle of this method is revealed,supporting tools such as the differential rotation transducer,composite rotary steering system and the hanger are designed,and technological process is optimized.A tool face control technique of steering drilling assembly is proposed and the calculation model of extension limit of liner differential rotary drilling with double tubular strings in horizontal well is established.These results show that the liner differential rotary drilling with double tubular strings is equipped with measurement while drilling(MWD)and positive displacement motor(PDM),and directional drilling of horizontal well is realized by adjusting rotary speed of drill pipe to control the tool face of PDM.Based on the engineering case of deep coalbed methane horizontal well in the eastern margin of Ordos Basin,the extension limit of horizontal drilling with double tubular strings is calculated.Compared with the conventional liner drilling method,the liner differential rotary drilling with double tubular strings increases the extension limit value of horizontal well significantly.The research findings provide useful reference for the integrated design and control of liner completion and drilling of horizontal wells.

Assessing the Environmental Impact of Extensive Beef Production in Grazing Lands of Argentina

Because of environmental constraints,beef cattle was for more than a century the only viable farming option in the extensive semiarid and subhumid lands of Argentina and the main source of nutrients for humans as well.However,a growing concern and criticism have risen today about its possible negative impact on the climate and the environment.These worries tend to affect current public opinions,national policies,and international trade.Based on 40 beef cattle farms scattered across different semiarid and subhumid regions of Argentina,here we evaluated the impact of extensive cattle production on carbon,water,and nutrient pollution.Life-Cycle Assessment(LCA)and Land-Based Assessment(LBA)were the two approaches we used here to compare the environmental impact of beef production.While the environmental footprint(EF)resulting from LCA expresses the impact per unit of food,the environmental balance(EB),derived from LBA,aims at quantifying the impact per unit of land.As such,the EB considers both negative and positive impacts on the farm as an integrated system.Following standardized procedures,we evaluated EF and EB up to the farm gate,leaving aside delocalized post-farm impacts such as those of processing,packaging,and transportation that occur beyond the farm gate.In agreement with previous evidence,our results show that the EF tends to decrease as per-head production increases.Correlation coefficients and statistical significance were the following for carbon(R=−0.574;p<0.01),water(R=−0.561;p<0.01),and N(R=−0.704;p<0.01)and Phosphorus(P)pollution(R=−0.802;p<0.01)footprints.On the contrary,the EB seems to be highly sensitive,and as per-hectare beef production increases.Correlations were the following for carbon emissions(CE:R=0.955;p<0.01),water consumption(WC:R=0.822;p<0.01),nitrogen excretion(NE:R=0.948;p<0.01)and phosphorus excretion(PE:R=0.945;p<0.01).What our results suggest is that the notion of EF is useful to evaluate the environmental impact in intensive beef production systems,and the EB is suitable to assess the impact of the extensive ones.In practice,both approaches provide different perspectives on the environmental-impact problem and they should be complementary used.We concluded that the methodological rigidity of EF does not allow proper discrimination among farms in the extensive systems.On the contrary,the EB approach tended to be highly sensitive to detecting differences between individual farms and farmers,thus allowing the identification of successful options for extensive beef production in terms of public image,policy-making,and commercial opportunities.

Mesenteric venous thrombosis in a young adult:A case report and review of the literature

BACKGROUND Acute mesenteric vein thrombosis(MVT)accounts for only 2%–10%of all cases of acute mesenteric ischaemia,with an incidence rate of~0.1%in Europe and the United States.It represents<10%of mesenteric infarction cases and is seen predominantly in older adults.In younger individuals,MVT is uncommon,with 36%of cases having unidentified mechanisms and causes.CASE SUMMARY A 27-year-old man presented to the emergency department on February 29,2024,with a chief complaint of intermittent abdominal pain for 3 day.He was previously in good health.As the abdominal pain was not alleviated by conventional treatment,an abdominal computed tomography(CT)scan was performed,which showed increased density in the portal and mesenteric veins.Further imaging,including portal vein ultrasound,mesenteric CT angiography,and enhanced abdominal CT,revealed widespread thrombosis of the portal vein system(including the main portal vein,left and right branches,proximal mesenteric vein,and splenic vein).After 10 day of thrombectomy and anticoagulation therapy,the patient’s abdominal pain had improved significantly.Follow-up assessments indicated that portal venous blood flow had largely returned to normal.He was discharged on March 9,2024.During a follow-up exam 2 months later,repeat abdominal enhanced CT showed that the previously detected thrombi were no longer visible.CONCLUSION Clinicians should remain vigilant for acute MVT in young patients presenting with abdominal pain,to prevent misdiagnosis of this fatal condition.