Fatigue Resistance of RCA Modified Asphalt Based on Dielectric Properties

In order to study the anti-fatigue performance of RCA modified asphalt (RMA),the performance of RMA and 90#matrix asphalt with different modifier content were measured by asphalt penetration,ductility,softening point,Brookfield viscosity,rheological index,infrared spectrum and dielectric constant test.This paper discusses the changes of asphalt basic indexes,fatigue properties and asphalt components based on dielectric properties under different modifier contents,and analyzes the grey correlation degree between components and asphalt pavement performance indexes.The results show that the optimum content of RCA modifier is 16.7%of the asphalt quality according to the penetration,ductility,softening point,Brockfield viscosity,viscosity temperature curve and fatigue life.In the phase angle-strain curve,there is disorder in the latter part of the curve.According to the strain (ε_(d)) corresponding to the disorder point,a new fatigue failure criterion is proposed and proved.Based on the new asphalt fatigue failure criterion,the fatigue prediction model of asphalt mixture is improved,and the fatigue life predicted by the improved fatigue model is compared with the fatigue life obtained by four-point bending fatigue test.The results show that the proposed new asphalt fatigue failure criterion is reasonable,and the fatigue life predicted by the improved asphalt mixture fatigue prediction model is accurate.The research method of classifying asphalt components based on dielectric properties is simple and effective,and the components have a high correlation with the road performance of base asphalt and modified asphalt.

A critical review of wheel/rail high frequency vibration-induced vibration fatigue of railway bogie in China

Purpose–This review aims to give a critical view of the wheel/rail high frequency vibration-induced vibration fatigue in railway bogie.Design/methodology/approach–Vibration fatigue of railway bogie arising from the wheel/rail high frequency vibration has become the main concern of railway operators.Previous reviews usually focused on the formation mechanism of wheel/rail high frequency vibration.This paper thus gives a critical review of the vibration fatigue of railway bogie owing to the short-pitch irregularities-induced high frequency vibration,including a brief introduction of short-pitch irregularities,associated high frequency vibration in railway bogie,typical vibration fatigue failure cases of railway bogie and methodologies used for the assessment of vibration fatigue and research gaps.Findings–The results showed that the resulting excitation frequencies of short-pitch irregularity vary substantially due to different track types and formation mechanisms.The axle box-mounted components are much more vulnerable to vibration fatigue compared with other components.The wheel polygonal wear and rail corrugation-induced high frequency vibration is the main driving force of fatigue failure,and the fatigue crack usually initiates from the defect of the weld seam.Vibration spectrum for attachments of railway bogie defined in the standard underestimates the vibration level arising from the short-pitch irregularities.The current investigations on vibration fatigue mainly focus on the methods to improve the accuracy of fatigue damage assessment,and a systematical design method for vibration fatigue remains a huge gap to improve the survival probability when the rail vehicle is subjected to vibration fatigue.Originality/value–The research can facilitate the development of a new methodology to improve the fatigue life of railway vehicles when subjected to wheel/rail high frequency vibration.

Efficacy of ginseng-based Renshenguben oral solution for cancer-related fatigue among patients with advanced-stage hepatocellular carcinoma:A prospective multicenter cohort study

Background:Cancer-related fatigue(CRF)is a common and debilitating symptom experienced by patients with advanced-stage cancer,especially those undergoing antitumor therapy.This study aimed to evaluate the efficacy and safety of Renshenguben(RSGB)oral solution,a ginseng-based traditional Chinese medicine,in alleviating CRF in patients with advanced hepatocellular carcinoma(HCC)receiving antitumor treatment.Methods:In this prospective,open-label,controlled,multicenter study,patients with advanced HCC at BCLC stage C and a brief fatigue inventory(BFI)score of≥4 were enrolled.Participants were assigned to the RSGB group(RSGB,10 mL twice daily)or the control group(with supportive care).Primary and secondary endpoints were the change in multidimensional fatigue inventory(MFI)score,and BFI and functional assessment of cancer therapy-hepatobiliary(FACT-Hep)scores at weeks 4 and 8 after enrollment.Adverse events(AEs)and toxicities were assessed.Results:A total of 409 participants were enrolled,with 206 assigned to the RSGB group.At week 4,there was a trend towards improvement,but the differences were not statistically significant.At week 8,the RSGB group exhibited a significantly lower MFI score(P<0.05)compared to the control group,indicating improved fatigue levels.Additionally,the RSGB group showed significantly greater decrease in BFI and FACT-Hep scores at week 8(P<0.05).Subgroup analyses among patients receiving various antitumor treatments showed similar results.Multivariate linear regression analyses revealed that the RSGB group experienced a significantly substantial decrease in MFI,BFI,and FACT-Hep scores at week 8.No serious drug-related AEs or toxicities were observed.Conclusions:RSGB oral solution effectively reduced CRF in patients with advanced HCC undergoing antitumor therapy over an eight-week period,with no discernible toxicities.These findings support the potential of RSGB oral solution as an adjunctive treatment for managing CRF in this patient population.

Thermal fatigue and wear of compacted graphite iron brake discs with various thermomechanical properties

The increase in payload capacity of trucks has heightened the demand for cost-effective yet high performance brake discs.In this work,the thermal fatigue and wear of compacted graphite iron brake discs were investigated,aiming to provide an experimental foundation for achieving a balance between their thermal and mechanical properties.Compacted graphite iron brake discs with different tensile strengths,macrohardnesses,specific heat capacities and thermal diffusion coefficients were produced by changing the proportion and strength of ferrite.The peak temperature,pressure load and friction coefficient of compacted graphite iron brake discs were analyzed through inertia friction tests.The morphology of thermal cracks and 3D profiles of the worn surfaces were also discussed.It is found that the thermal fatigue of compacted graphite iron discs is determined by their thermal properties.A compacted graphite iron with the highest specific heat capacity and thermal diffusion coefficient exhibits optimal thermal fatigue resistance.Oxidization of the matrix at low temperatures significantly weakens the function of alloy strengthening in hindering the propagation of thermal cracks.Despite the reduced hardness,increasing the ferrite proportion can mitigate wear loss resulting from low disc temperatures and the absence of abrasive wear.

Damage Evolution of Ballastless Track Concrete Exposed to Flexural Fatigue Loads:The Application of Ultrasonic Pulse Velocity,Impact-echo and Surface Electrical Resistance Method

In order to clarify the fatigue damage evolution of concrete exposed to flexural fatigue loads,ultrasonic pulse velocity(UPV),impact-echo technology and surface electrical resistance(SR) method were used.Damage variable based on the change of velocity of ultrasonic pulse(Du) and impact elastic wave(Di)were defined according to the classical damage theory.The influences of stress level,loading frequency and concrete strength on damage variable were measured.The experimental results show that Du and Di both present a three-stages trend for concrete exposed to fatigue loads.Since impact elastic wave is more sensitive to the microstructure damage in stage Ⅲ,the critical damage variable,i e,the damage variable before the final fracture of concrete of Di is slightly higher than that of Du.Meanwhile,the evolution of SR of concrete exposed to fatigue loads were analyzed and the relationship between SR and Du,SR and Di of concrete exposed to fatigue loads were established.It is found that the SR of concrete was decreased with the increasing fatigue cycles,indicating that surface electrical resistance method can also be applied to describe the damage of ballastless track concrete exposed to fatigue loads.

Frequency Domain Fatigue Evaluation on SCR Girth-Weld Based on Structural Stress

The Steel Catenary Riser(SCR)is a vital component for transporting oil and gas from the seabed to the floating platform.The harsh environmental conditions and complex platform motion make the SCR’s girth-weld prone to fatigue failure.The structural stress fatigue theory and Master S-N curve method provide accurate predictions for the fatigue damage on the welded joints,which demonstrate significant potential and compatibility in multi-axial and random fatigue evaluation.Here,we propose a new frequency fatigue model subjected to welded joints of SCR under multiaxial stress,which fully integrates the mesh-insensitive structural stress and frequency domain random process and transforms the conventional welding fatigue technique of SCR into a spectrum analysis technique utilizing structural stress.Besides,a full-scale FE model of SCR with welds is established to obtain the modal structural stress of the girth weld and the frequency response function(FRF)of modal coordinate,and a biaxial fatigue evaluation about the girth weld of the SCR can be achieved by taking the effects of multi-load correlation and pipe-soil interaction into account.The research results indicate that the frequency-domain fatigue results are aligned with the time-domain results,meeting the fatigue evaluation requirements of the SCR.

Effects of orientation on the fatigue crack growth behaviors of the ZK60 magnesium alloy in air and PBS

Strong anisotropic corrosion and mechanical properties caused by specimen orientations greatly limit the applications of wrought magnesium alloys.To investigate the influences of specimen orientation,the corrosion tests and(corrosion)fatigue crack growth tests were conducted.The rolled and transverse surfaces of the materials show distinct corrosion rate differences in the stable corrosion stage,but the truth is the opposite for the initial stage of corrosion.In air,specimen orientations have a significant influence on the plastic deformation mechanisms near the crack tip,which results in different fatigue fracture surfaces and cracking paths.Compared with R-T specimens,N-T specimens show a slower fatigue crack growth(FCG)rate in air,which can be attributed to crack closure effects and deformation twinning near the crack tip.The corrosion environment will not significantly change the main plastic deformation mechanisms for the same type of specimen.However,the FCG rate in phosphate buffer saline(PBS)is one order of magnitude higher than that in air,which is caused by the combined effects of hydrogen-induced cracking and anodic dissolution.Owing to the similar corrosion rates at crack tips,the specimens with different orientations display close FCG rates in PBS.

Research on Driver’s Fatigue Detection Based on Information Fusion

Driving fatigue is a physiological phenomenon that often occurs during driving.After the driver enters a fatigued state,the attentionis lax,the response is slow,and the ability todeal with emergencies is significantly reduced,which can easily cause traffic accidents.Therefore,studying driver fatigue detectionmethods is significant in ensuring safe driving.However,the fatigue state of actual drivers is easily interfered with by the external environment(glasses and light),which leads to many problems,such as weak reliability of fatigue driving detection.Moreover,fatigue is a slow process,first manifested in physiological signals and then reflected in human face images.To improve the accuracy and stability of fatigue detection,this paper proposed a driver fatigue detection method based on image information and physiological information,designed a fatigue driving detection device,built a simulation driving experiment platform,and collected facial as well as physiological information of drivers during driving.Finally,the effectiveness of the fatigue detection method was evaluated.Eye movement feature parameters and physiological signal features of drivers’fatigue levels were extracted.The driver fatigue detection model was trained to classify fatigue and non-fatigue states based on the extracted features.Accuracy rates of the image,electroencephalogram(EEG),and blood oxygen signals were 86%,82%,and 71%,separately.Information fusion theory was presented to facilitate the fatigue detection effect;the fatigue features were fused using multiple kernel learning and typical correlation analysis methods to increase the detection accuracy to 94%.It can be seen that the fatigue driving detectionmethod based onmulti-source feature fusion effectively detected driver fatigue state,and the accuracy rate was higher than that of a single information source.In summary,fatigue drivingmonitoring has broad development prospects and can be used in traffic accident prevention and wearable driver fatigue recognition.

The Effect and Mechanism of Fructus lycii on Improvement of Exercise Fatigue Using a Network Pharmacological Approach with in vitro Experimental Verification

Objective This study aimed to investigate the effect and underlying mechanism of Fructus lycii in improving exercise fatigue.Methods A network pharmacological approach was used to explore potential mechanisms of action of Fructus lycii.Skeletal muscle C2C12 cells and immunofluorescence were employed to verify the effect and mechanism of the representative components in Fructus lycii predicted by network pharmacological analysis.Results Six potential active components,namely quercetin,β-sitosterol,stigmasterol,7-Omethylluteolin-6-C-beta-glucoside_qt,atropine,and glycitein,were identified to have potency in improving exercise fatigue via multiple pathways,such as the PI3K-Akt,neuroactive ligand-receptor interaction,IL-17,TNF,and MAPK signaling pathways.The immunofluorescence results indicated that quercetin,a significant active component in Fructus lycii,increased the mean staining area of 2-NBDG,TMRM,and MitoTracker,and decreased the area of CellRox compared to the control.Furthermore,the protein expression levels of p-38 MAPK,p-MAPK,p-JNK,p-PI3K,and p-AKT markedly increased after quercetin treatment.Conclusion Fructus lycii might alleviate exercise fatigue through multiple components and pathways.Among these,quercetin appears to improve exercise fatigue by enhancing energy metabolism and reducing oxidative stress.The PI3K-AKT and MAPK signaling pathways also appear to play a role in this process.

Enhancing fatigue performance of AZ31 magnesium alloy components fabricated by cold metal transfer-based wire arc directed energy deposition through LPB

Cold Metal Transfer-Based Wire Arc Directed Energy Deposition(CMT-WA-DED)presents a promising avenue for the rapid fabrication of components crucial to automotive,shipbuilding,and aerospace industries.However,the susceptibility to fatigue of CMT-WA-DED-produced AZ31 Mg alloy components has impeded their widespread adoption for critical load-bearing applications.In this study,a comprehensive investigation into the fatigue behaviour of WA-DED-fabricated AZ31 Mg alloy has been carried out and compared to commercially available wrought AZ31 alloy.Our findings indicate that the as-deposited parts exhibit a lower fatigue life than wrought Mg alloy,primarily due to poor surface finish,tensile residual stress,porosity,and coarse grain microstructure inherent in the WA-DED process.Low Plasticity Burnishing(LPB)treatment is applied to mitigate these issues,which induce significant plastic deformation on the surface.This treatment resulted in a remarkable improvement of fatigue life by 42%,accompanied by a reduction in surface roughness,grain refinement and enhancement of compressive residual stress levels.Furthermore,during cyclic deformation,WA-DED specimens exhibited higher plasticity and dislocation density compared to both wrought and WA-DED+LPB specimens.A higher fraction of Low Angle Grain Boundaries(LAGBs)in WA-DED specimens contributed to multiple crack initiation sites and convoluted crack paths,ultimately leading to premature failure.In contrast,wrought and WA-DED+LPB specimens displayed a higher percentage of High Angle Grain Boundaries(HAGBs),which hindered dislocation movement and resulted in fewer crack initiation sites and less complex crack paths,thereby extending fatigue life.These findings underscore the effectiveness of LPB as a post-processing technique to enhance the fatigue performance of WA-DED-fabricated AZ31 Mg alloy components.Our study highlights the importance of LPB surface treatment on AZ31 Mg components produced by CMT-WA-DED to remove surface defects,enabling their widespread use in load-bearing applications.

Influence of transcatheter arterial embolization on symptom distress and fatigue in liver cancer patients

BACKGROUND Hepatocellular carcinoma(HCC)is a prevalent malignancy,and transcatheter arterial embolization(TAE)has emerged as a pivotal therapeutic modality.How-ever,TAE may induce symptom distress and fatigue,adversely affecting the quality of life of patients.AIM To investigate symptom distress,fatigue,and associated factors in HCC patients undergoing TAE.METHODS We used a cross-sectional design and purposive sampling to enroll HCC patients who underwent TAE at our institution from January to December 2022.Question-naires were utilized to collect data on symptom distress and fatigue scores from the first to the third day after TAE.RESULTS Our study revealed a significant reduction in fatigue and symptom distress among patients after TAE.Pain,fatigue,insomnia,fever and abdominal dis-tension were the most common symptoms troubling patients during the first 3 d post-TAE.Marital status,presence of family support,physical functional status,age,and symptom distress were identified as predictors of fatigue in patients.CONCLUSION Healthcare professionals should educate HCC patients on symptom distress and INTRODUCTION Hepatocellular carcinoma(HCC)ranks as the fifth most prevalent cancer and the third leading cause of cancer-related mortality globally.Surgical intervention remains the cornerstone of HCC treatment;however,due to the challenges associated with early diagnosis and the lack of specific diagnostic markers,a considerable proportion of patients are diagnosed at advanced stages,rendering them ineligible for surgical interventions.Transcatheter arterial embolization(TAE)is an interventional therapeutic approach involving the insertion of a fine catheter via the femoral artery to reach the vasculature near the tumor site.TAE aims to obstruct the arterial supply to the tumor by deploying embolic agents,thereby inducing necrosis in cancer cells.This procedure is suitable for patients with good liver function and overall health,particularly those with large HCCs that have not invaded the portal vein[1,2].Nonetheless,following TAE,hepatocytes incur variable degrees of damage,leading to the development of a constel-lation of symptoms reminiscent of acute hepatitis.These symptoms include fatigue and systemic discomfort,such as nausea,vomiting,fever,abdominal pain,as well as transient elevations in aspartate aminotransferase(AST)and alanine aminotransferase(ALT),collectively referred to as postembolization syndrome[3,4].These symptoms may arise due to ischemia of the liver and gallbladder,temporary liver enlargement,and peritoneal irritation.While many studies have explored fatigue and symptom distress in cancer patients both nationally and internationally,with some focusing on symptom distress following transcatheter arterial chemoembolization,there has been limited in-depth investigation into the fatigue and symptom distress resulting from TAE treatment[5-8].Fatigue and pain are both subjective experiences,typically arising from the gradual depletion of energy reserves during the course of illness[9].Fatigue is particularly prevalent among cancer patients,with rates soaring as high as 90%.Despite extensive research exploring cancer-related fatigue and its influencing factors,a unanimous consensus remains elusive.Hence,the primary objective of this study was to investigate the symptom distress and fatigue experienced by liver cancer patients following TAE treatment and to analyze potential contributing factors.

Research into Applicability of Wöhler Curve Method for Low-Cycle Fatigue of Metallic Materials

Recently,a description on a practicability of the Wöhler Curve Method for low-cycle fatigue of metals was given by the author.By the description and the low cycle fatigue test data of 16 MnR steel,it is important to show that,for low cycle fatigue of metals,such a way that a stress-based intensity parameter calculated by the linear-elastic analysis is taken to be a stress intensity parameter,S,to establish a relationship between the stress intensity parameter,S,and the fatigue life,N,is practicable.In this paper,many metallic materials from the literature are given to show that the Wöhler Curve Method is well suitable for low-cycle fatigue analysis of metals.

Vision-based fatigue crack detection using global motion compensation and video feature tracking

Fatigue cracks that develop in civil infrastructure such as steel bridges due to repetitive loads pose a major threat to structural integrity.Despite being the most common practice for fatigue crack detection,human visual inspection is known to be labor intensive,time-consuming,and prone to error.In this study,a computer vision-based fatigue crack detection approach using a short video recorded under live loads by a moving consumer-grade camera is presented.The method detects fatigue crack by tracking surface motion and identifies the differential motion pattern caused by opening and closing of the fatigue crack.However,the global motion introduced by a moving camera in the recorded video is typically far greater than the actual motion associated with fatigue crack opening/closing,leading to false detection results.To overcome the challenge,global motion compensation(GMC)techniques are introduced to compensate for camera-induced movement.In particular,hierarchical model-based motion estimation is adopted for 2D videos with simple geometry and a new method is developed by extending the bundled camera paths approach for 3D videos with complex geometry.The proposed methodology is validated using two laboratory test setups for both in-plane and out-of-plane fatigue cracks.The results confirm the importance of motion compensation for both 2D and 3D videos and demonstrate the effectiveness of the proposed GMC methods as well as the subsequent crack detection algorithm.

FEA-Based Fatigue Life Assessment of Cycloidal Displacement Cam and Flat-Faced Follower Mechanism

Cam-followers provide reliable and controlled motions in various mechanical systems. Due to the highly fluctuating load between the cam and follower in operation, the cam-follower may be subjected to a high risk of contact fatigue failure. This paper assesses the fatigue life of a cycloidal displacement cam and a flat-faced follower under the defined loads and constraints. Computer-aided design (CAD) model of the cam-follower is developed in CATIA software and imported to ANSYS software for finite element analysis (FEA) of fatigue life. MATLAB programming is developed for determining the appropriate spring constant and pre-load force to always keep the cam and follower in contact. The fatigue life of the cam-follower has been estimated under the specified operating conditions. The analysis method can be applied to investigate the fatigue life of cams with other profiles, including the modified trapezoidal functions, polynomial functions, etc.

Study on Fatigue Life Prediction of TC4-DT Structural Simulants by Using Critical Distance Theory

In the actual engineering of the structure, mechanical notch is inevitable, which will significantly reduce the fatigue life of the structure. In order to ensure the application of notch structures in engineering, the accurate evaluation of the impact of notch on fatigue life has become the basis of fatigue reliability design of structures. To investigate the influence of the concave structure on the overall fatigue life in practical engineering, three different sizes of V-notch parts and concave structure simulation parts were designed, and the life prediction was carried out by using the critical distance method. The results show that the stress gradient of the concave structure with the same stress concentration coefficient is much greater than that of the V-notch structure. Considering the notch effect, the S-T model in the critical distance method is modified by the stress concentration coefficient and stress gradient, and it is found that the life prediction accuracy reaches the ideal.

Jianpi Fuzheng Decoction in the Treatment of Gastric Cancer-Related Fatigue

Objective:To observe the clinical effects of Jianpi Fuzheng Decoction in patients with gastric cancer and cancer-related fatigue(CRF).Methods:Using the random number table method as a reference,68 cases of gastric CRF were randomly divided into two groups.One group served as the control group and received basic treatment,while the other was the observation group.The observation group,in addition to the control group’s treatment,received Jianpi Fuzheng Decoction.The clinical treatment effectiveness,fatigue scores,immune function indicators,and treatment safety were compared between the two groups.Results:The total clinical treatment effectiveness of the observation group and the improvement in immune function indicators after treatment were higher than those of the control group.The fatigue score after treatment was lower in the observation group than in the control group(P<0.05).No serious adverse reactions occurred during the treatment in either group.Conclusion:Jianpi Fuzheng Decoction can enhance the clinical treatment effectiveness for gastric cancer patients with CRF.It facilitates the acceleration of fatigue symptom improvement and immune function enhancement.The medication’s safety is guaranteed,making it worthy of promotion.

Analytical Models of Concrete Fatigue:A State-of-the-Art Review

Fatigue failure phenomena of the concrete structures under long-term low amplitude loading have attractedmore attention.Some structures,such as wind power towers,offshore platforms,and high-speed railways,may resist millions of cycles loading during their intended lives.Over the past century,analytical methods for concrete fatigue are emerging.It is concluded that models for the concrete fatigue calculation can fall into four categories:the empirical model relying on fatigue tests,fatigue crack growth model in fracture mechanics,fatigue damage evolution model based on damage mechanics and advanced machine learning model.In this paper,a detailed review of fatigue computing methodology for concrete is presented,and the characteristics of different types of fatigue models have been stated and discussed.

Corrosion and corrosion-fatigue behavior of magnesium metal matrix composites for bio-implant applications:A review

Recently,the topic of bioresorbable metals,with much focus on magnesium for bone implant applications,has been an area of considerable investigation.Indeed,it could be argued that magnesium is the most promising biodegradable material currently being studied for use as an orthopedic skeletal fixation and joint replacement hardware.However,the fast degradation rate of magnesium-based materials in the physiological environment negatively affects their mechanical integrity and hence limits their biomedical use.The most critical conditions may occur when the implant is subjected to a corrosive physiological environment and a fluctuating load during daily activities.Hence,numerous studies have been published on the synthesis,alloying,and coating of magnesium to control degradation rate and increase strength and durability.Among the materials and strategies employed to achieve these goals,magnesium-based biocomposites have exhibited superior mechanical properties and acceptable biocompatibility.However,there is a lack of understanding of their corrosion and corrosion-fatigue behavior.Such understanding is necessary to qualify these new materials for various bio-implant applications.To this end,this paper reviews the recent advances in the corrosion and corrosion-fatigue behavior of magnesium-based biocomposites.It also provides a comprehensive discussion of different factors that influence the biocompatibility,corrosion,fatigue,and corrosion-fatigue of magnesium-based biocomposites as potential implant materials.This study emphasizes that despite the abundance of various studies on the corrosion behavior of magnesium-based biocomposites,there is an imperative need for more fatigue and corrosion-fatigue studies.

Microstructural characteristics and low-cycle fatigue properties of AZ91 and AZ91-Ca-Y alloys extruded at different temperatures

The commercial AZ91 alloy and nonflammable SEN9(AZ91-0.3Ca-0.2Y,wt%)alloy are extruded at 300°C and 400°C.Their microstructure,tensile and compressive properties,and low-cycle fatigue(LCF)properties are investigated,with particular focus on the influence of the extrusion temperature.In the AZ91 and SEN9 materials extruded at 300°C(300-materials),numerous fine Mg_(17)Al_(12)particles are inhomogeneously distributed owing to localized dynamic precipitation during extrusion,unlike those extruded at 400°C(400-materials).These fine particles suppress the coarsening of recrystallized grains,decreasing the average grain size of 300-materials.Although the four extruded materials have considerably different microstructures,the difference in their tensile yield strengths is insignificant because strong grain-boundary hardening and precipitation hardening effects in 300-materials are offset almost completely by a strong texture hardening effect in 400-materials.However,owing to their finer grains and weaker texture,300-materials have higher compressive yield strengths than400-materials.During the LCF tests,{10-12}twinning is activated at lower stresses in 400-materials than in 300-materials.Because the fatigue damage accumulated per cycle is smaller in 400-materials,they have longer fatigue lives than those of 300-materials.A fatigue life prediction model for the investigated materials is established on the basis of the relationship between the total strain energy density(ΔW_(t))and the number of cycles to fatigue failure(N_(f)),and it is expressed through a simple equation(ΔW_(t)=10·N_(f)-0.59).This model enables fatigue life prediction of both the investigated alloys regardless of the extrusion temperature and strain amplitude.

Numerical Simulation of Fretting Fatigue Damage Evolution of Cable Wires Considering Corrosion and Wear Effects

In this paper,a numerical model of fretting fatigue analysis of cablewire and the fretting fatigue damage constitutive model considering the multi-axis effect were established,and the user material subroutine UMAT was written.Then,the constitutive model of wear morphology evolution of cable wire and the constitutive model of pitting evolution considering the mechanical-electrochemical effect were established,respectively.The corresponding subroutines UMESHMOTION_Wear and UMESHMOTION_Wear_Corrosion were written,and the fretting fatigue lifewas further predicted.The results showthat the numerical simulation life obtained by the programin this paper has the same trend as the tested one;the error is only about 0.7%in the medium life area;When the normal contact force increases from 120 to 240 N,the fretting life of cable wire decreases by 25%;When the evolution of wear morphology and corrosion effect are considered simultaneously,the depth of the wear zone exceeds 0.08mm after 600,000 loads,which ismuch larger than 0.04 mmwhen only the evolution of wear morphology is considered.When the evolution of wear morphology and corrosion morphology is considered simultaneously,the damage covers the whole contact surface after 300,000 loads,and the penetrating damage zone forms after 450,000 loads,which is obviously faster than that when only the wearmorphology evolution is considered.Themethod proposed in this paper can provide a feasible numerical simulation scheme for the visualization of the damage process and accurate life prediction of cable-supported bridges.