A variable camber wing driven by pneumatic artificial muscles is developed in this paper. Firstly, the experimental setup to measure the static output force of pneumatic artificial muscle is designed and the relations...A variable camber wing driven by pneumatic artificial muscles is developed in this paper. Firstly, the experimental setup to measure the static output force of pneumatic artificial muscle is designed and the relationship between the static output force and the air pressure is investigated. Experimental results show that the static output force of pneumatic artificial muscle decreases nonlinearly with the increase of contraction ratio. Secondly, the model of variable camber wing driven by pneumatic artificial muscles is manufactured to validate the variable camber concept. Finally, wind tunnel tests are conducted in the low speed wind tunnel. It is found that the wing camber increases with the increase of air pressure. When the air pressure of PAMs is 0.4 MPa and 0.5 MPa, the tip displacement of the trailing-edge is 3 mm and 5 mm, respectively. The lift of aerofoil with flexible trailing-edge increases by 87% at AOA of 5°.展开更多
The method for analyzing the deformation of flexible skin under the air loads was developed based on the panel method and finite element method.The deformation of flexible skin under air pressures and effects of the l...The method for analyzing the deformation of flexible skin under the air loads was developed based on the panel method and finite element method.The deformation of flexible skin under air pressures and effects of the local deformation on the aerodynamic characteristics were discussed.Numerical results show that the flexible skin on the upper surface of trailing-edge will bubble under the air loads and the bubble has a powerful effect on the aerodynamic pressure near the surface of local deforma-tion.Then the stiffness requirements for flexible skin of variable trailing-edge were given by using the Jacobs rule,i.e.,the maximum displacement of skin is not greater than 0.1% of wing chord.Results show that the in-plane stiffness can be reduced by increasing the ratio of bending stiffness to in-plane stiffness.Although the deformation of flexible skin increases with the in-plane stiffness decreasing,it depends on the bending stiffness.When the bending stiffness exceeds critical value,the deformation of flexible skin only depends on the bending stiffness and has nothing to do with the in-plane stiffness.The conclusions can be used for the structural design of flexible skin.展开更多
基金Sponsored by the Specialized Research Fund for the Doctoral Program of Higher Education(Grant No.20102302120032)the Open Foundation of Key Laboratory of Advanced Composites in Special Environmentsthe Natural Scientific Research Innovation Foundation in Harbin Institute of Technology(Grant No.HIT.NSRIF.2012028)
文摘A variable camber wing driven by pneumatic artificial muscles is developed in this paper. Firstly, the experimental setup to measure the static output force of pneumatic artificial muscle is designed and the relationship between the static output force and the air pressure is investigated. Experimental results show that the static output force of pneumatic artificial muscle decreases nonlinearly with the increase of contraction ratio. Secondly, the model of variable camber wing driven by pneumatic artificial muscles is manufactured to validate the variable camber concept. Finally, wind tunnel tests are conducted in the low speed wind tunnel. It is found that the wing camber increases with the increase of air pressure. When the air pressure of PAMs is 0.4 MPa and 0.5 MPa, the tip displacement of the trailing-edge is 3 mm and 5 mm, respectively. The lift of aerofoil with flexible trailing-edge increases by 87% at AOA of 5°.
基金Supported by China Postdoctoral Science Foundation (Grant No 20080440888)
文摘The method for analyzing the deformation of flexible skin under the air loads was developed based on the panel method and finite element method.The deformation of flexible skin under air pressures and effects of the local deformation on the aerodynamic characteristics were discussed.Numerical results show that the flexible skin on the upper surface of trailing-edge will bubble under the air loads and the bubble has a powerful effect on the aerodynamic pressure near the surface of local deforma-tion.Then the stiffness requirements for flexible skin of variable trailing-edge were given by using the Jacobs rule,i.e.,the maximum displacement of skin is not greater than 0.1% of wing chord.Results show that the in-plane stiffness can be reduced by increasing the ratio of bending stiffness to in-plane stiffness.Although the deformation of flexible skin increases with the in-plane stiffness decreasing,it depends on the bending stiffness.When the bending stiffness exceeds critical value,the deformation of flexible skin only depends on the bending stiffness and has nothing to do with the in-plane stiffness.The conclusions can be used for the structural design of flexible skin.
