Characteristics and applications of gas desorption with excavation disturbances in coal mining

According to the deficiency of experiment system for gas adsorption and desorption in coal mass, a large scale experiment system is developed independently by researchers. This experiment system is composed of primary and auxiliary boxes, power transmission system, mining system, loading system, gas charging system, data monitoring and intelligent acquisition system. The maximum experiment coal consumption is 1200 kg, the mining system is developed to conduct experiment for gas desorption under excavating disturbance, and the plane-charging cribriform ventilation device is developed to realize uniform ventilation for experiment coal sample, which is accord with the actual gas source situation of coal bed. The desorption characteristics of gas in coal are experimentally studied under the conditions of nature and mining using the experiment system. The results show that, compare with nature condition, the permeability of coal and the velocity of gas desorption could significantly increase under the influence of coal pressure relief and destruction caused by mining, and the degree of gas desorption could somewhat increase too. Finally, pressure relief gas extraction of current seam and adjacent seams after mining in a certain coal mine of Yangquan mining area are introduced, and the gas desorption experiment results is verified by analyzing the effect of gas extraction.

Research on the gas desorption law of the consumingly destruct coal

To solve the issues of calculating gas loss quantity during sampling,simulated gas desorption process of the consumingly destruct coal with the assembly simulation testing device.Through an analysis of the simulation test datum using SPSS software, established a new formula that can be better description on gas desorption process,more accurate calculation of the gas loss quantity during sampling process,and calculating re- leasable gas quantity during a certain period.Aimed at the new formula,the best time of taking sample is confirmed 3 minutes for consumingly destruct coal,the computative error is less than 10%.Through experiment at laboratory and locale,the new formula could well describe consumingly destruct coal gas desorption law,and it has high calculation preci- sion of gas loss quantity in sampling and desorption quanlity.

Infrared measurement of temperature field in coal gas desorption

In order to reveal the temperature change in coal gas desorption process,the temperature variation in coal gas desorption process under different particle sizes is analyzed with infrared thermal imager.The infrared video signals obtained by the experiment are processed with SAT.Then the infrared radiation signals are processed by EMD with Hilbert–Huang and the infrared radiation noise is effectively removed.The research results show that the desorption process,with the change of the temperature,is an endothermic process.The coal absorbs heat when the gas is desorbed and the temperature drops.The coal body temperature drop range is obviously related to coal particle size.The smaller the particle size is,the bigger the temperature drop becomes.The temperature variation curves in the process of coal gas desorption under different particle sizes are fitted,and they comply with the exponential function.The research results lay the theoretical and experimental foundation for non-contact prediction on working face of coal and gas outburst with infrared thermal image technology.

Prediction method for risks of coal and gas outbursts based on spatial chaos theory using gas desorption index of drill cuttings

Based on the evolution of geological dynamics and spatial chaos theory, we proposed the advanced prediction an advanced prediction method of a gas desorption index of drill cuttings to predict coal and gas outbursts. We investigated and verified the prediction method by a spatial series data of a gas desorption index of drill cuttings obtained from the 113112 coal roadway at the Shitai Mine. Our experimental results show that the spatial distribution of the gas desorption index of drill cuttings has some chaotic charac- teristics, which implies that the risk of coal and gas outbursts can be predicted by spatial chaos theory. We also found that a proper amount of sample data needs to be chosen in order to ensure the accuracy and practical maneuverability of prediction. The relative prediction error is small when the prediction pace is chosen carefully. In our experiments, it turned out that the optimum number of sample points is 80 and the optimum prediction pace 30. The corresponding advanced prediction pace basically meets the requirements of engineering applications.

Experimental study of water effects on gas desorption during highpressure water injection

For the question of applying high-pressure water injection to increase gas extraction efficiency by increasing the permeability of water to drive gas action, an independently designed gas desorption experimental measuring device was used under the condition of external solution invasion. The law of water effect on gas desorption was obtained after water invasion through experiment for the first time. The results show that water＇s later invasion not only can make the quantity of gas dcsorp- tion greatly reduced, but also can make gas desorption end early. Therefore, when evaluating the applications of high-pressure water injection to increase gas extraction efficiency, we should take water damaging effects on gas desorption into account.

Component fractionation of temporal evolution in adsorption-desorption for binary gas mixtures on coals from Haishiwan Coal Mine

Adsorption-desorption experiments on CO2-CH4 gas mixtures with varying compositions have been conducted to study the fractionation characteristics of CO2-CH4 on Haishiwan coal samples. These were carried out at constant temperature but different equilibrium pressure conditions. Based on these experimental results, the temporal evolution of component fractionation in the field was investigated. The results show that the CO2 concentration in the adsorbed phase is always greater than that in the original gas mixture during the desorption process, while CH4 shows the opposite characteristics. This has confirmed that CO2 , with a greater adsorption ability has a predominant position in the competition with CH4 under different pressures. Where gas drainage is employed, the ratio of CO2 to CH4 varies with time and space in floor roadways used for gas drainage, and in the ventilation air in Nos.1 and 2 coal seams, which is consistent with laboratory results.

Rapid decompression and desorption induced energetic failure in coal

In this study, laboratory experiments are conducted to investigate the rapid decompression and desorption induced energetic failure in coal using a shock tube apparatus. Coal specimens are recovered from Colorado at a depth of 610 m. The coal specimens are saturated with the strong sorbing gas CO2 for a certain period and then the rupture disc is suddenly broken on top of the shock tube to generate a shock wave propagating upwards and a rarefaction wave propagating downwards through the specimen.This rapid decompression and desorption has the potential to cause energetic fragmentation in coal.Three types of behaviors in coal after rapid decompression are found, i.e. degassing without fragmentation, horizontal fragmentation, and vertical fragmentation. We speculate that the characteristics of fracture network（e.g. aperture, spacing, orientation and stiffness） and gas desorption play a role in this dynamic event as coal can be considered as a dual porosity, dual permeability, dual stiffness sorbing medium. This study has important implications in understanding energetic failure process in underground coal mines such as coal gas outbursts.

Temperature influence on macro-mechanics parameter of intact coal sample containing original gas from Baijiao Coal Mine in China

Investigation of temperature effect on mechanical parameters of coal is very important for understanding the mechanical response of coal bed at high temperature.It is especially benefcial for mitigating the thermal-induced disasters occurred in those coal mines suffering from heat hazard.In this work,coal samples,obtained from the No.2442 working face of Baijiao Coal Mine,were subjected to uniaxial compression ranging from 20 to 40℃ with an interval of 5℃.The apparatus used was designed to obtain deformation of a stressed sample,as well as the emission of gases desorbing from coal matrix.The adsorbed gas desorption caused by heating is measured during the entire testing.It is evident that the concentrations of releasing gas(containing methane,carbon dioxide and ethane)slightly rise with increasing temperature.Gas movement observed is closely related to the deformation of coal sample.Both uniaxial compressive strength and elastic modulus of coal samples tend to reduce with temperature.It reveals that increasing temperature can not only result in thermal expansion of coal,but also lead to desorption of preexisting gas in coal which can in turns harden coal due to shrinks of the coal matrix.Even though desorption of adsorbed gas can contribute to the hardening effect for the heated coal,by comparison to the results,it could be inferred that the softening of coal resulted from thermal expansion still predominates changes in mechanical characters of coal sample with temperature at the range from20 to 40℃.

Direct fitting measurement of gas content in coalbed and selection of reasonable sampling time

In this study, we selected 9 typical coal samples with different metamorphic grades as the study subjects,measured their initial 30-min gas desorption at 30℃ and different pressure using a self-developed gas adsorption/desorption device. Based on the characteristics of gas desorption from coal samples, we proposed a direct fitting method for measurement of gas content in coalbed, analyzed the effects of sampling time on the measurement results and determined the reasonable sampling time of coal samples with different metamorphic grades at different gas adsorption pressure at equilibrium. The results show that (1)the error of gas contents obtained using the direct fitting method relative to that obtained using indirect method is less than 10%, which meets the actual on-site requirements and verifies the feasibility of the direct fitting method;(2) when the relative error is controlled within ±10%, the reasonable sampling time of coal samples is linearly related to the gas adsorption pressure at equilibrium;(3) the reasonable sampling time of coal samples with the same metamorphic grade exhibits a shortening trend with increasing gas adsorption pressure at equilibrium;(4) for coal samples with similar gas adsorption pressure at equilibrium, the reasonable sampling time of coal samples displays a shortening trend with increasing metamorphic grade. Overall, the study provides a basis for improving the measurement accuracy of gas content in coalbed.

Horizontal borehole azimuth optimization for enhanced stability and coal seam gas production

Horizontal boreholes have been widely used to extract natural gas from coal seams.However,these boreholes can encounter severe instability issues leading to production interruption.Optimizing drilling azimuth is a potential solution for enhancing borehole stability while considering gas production.In this work,we improved and implemented a dual-porosity,fully coupled geomechanical-hydraulic numerical model into COMSOL Multiphysics to investigate into this factor.The sophisticated numerical model incorporates various critical factors,including desorption-induced matrix shrinkage,stress-dependent anisotropic fracture permeability,and the interactions of gas flow and reservoir deformation in matrices and fractures.A suite of simulation scenarios(e.g.,varying coal strength)was carried out to quantify the impact of drilling azimuth on coal permeability evolution,cumulative gas production,and the borehole break-out width for Goonyella Middle Seam of Bowen Basin,Australia.The model was calibrated against both theoretical permeability values and field gas production data.Due to the lack of directly measured matrix permeability data,the actual gas production was used to back calculate the best-matched matrix permeability,which is 0.65μD for this particular work.Moreover,based on the breakout shape and induced volumetric strains around the borehole,drilling along the maximum horizontal stress does not necessarily lead to the best stability of the borehole,as generally believed.A drilling azimuth between 0and 60results in similar breakout width,whereas a drilling azimuth between 60and 90achieves the most efficient gas production.By considering both gas production efficiency and borehole stability,for this particular reservoir condition,the optimum drilling azimuth is determined to be between 45and 60.This study presents a practical approach for determining the optimum drilling azimuth in coal seam gas extraction through in seam boreholes.

Dynamic effects of high-pressure pulsed water jet in low-permeability coal seams

Mine gas extraction in China is difficult due to the characteristics such as micro-porosity,low-permeability and high adsorption of coal seams.The pulsed mechanismof a high-pressure pulsed water jet was studied through theoretical analysis,experimentand field measurement.The results show that high-pressure pulsed water jet has threedynamic properties.What's more,the three dynamic effects can be found in low-permeabilitycoal seams.A new pulsed water jet with 200-1 000 Hz oscillation frequency andpeak pressure 2.5 times than average pressure was introduced.During bubble collapsing,sound vibration and instantaneous high pressures over 100 MPa enhanced the cuttingability of the high-pressure jet.Through high-pressure pulsed water jet drilling and slotting,the exposure area of coal bodies was greatly enlarged and pressure of the coal seamsrapidly decreased.Therefore,the permeability of coal seams was improved and gas absorptionrate also decreased.Application results show that gas adsorption rate decreasedby 30%-40%and the penetrability coefficient increased 100 times.This proves that high-pressurepulsed water is more efficient than other conventional methods.

Experimental study on the variation law of coal temperature during excavation in coal mines

By testing the temperature of the coal and the stress of the working surface, we got the variation law of coal temperature and coal stress during the excavation. The result shows that the activities of mining affect the coal temperature, the fluctuation of coal temperature and the coal stress is synchronous. During the smooth change of crustal stress, the coal temperature basically keeps unchanged, when the dynamic phenomenon appears, the coal temperature changes, as well the coal stress. Therefore, we can use the online coal temperature monitoring system to test the coal temperature of the working surface continuously, and it can provide basic information for forecasting coal mine power disaster before it happens.