The heredity of clusters in rapidly cooled(Zr_(50)Cu_(50))_(100-x)Al_x melts and its correlation with glass-forming ability(GFA)are studied via molecular dynamics simulations.Pair distribution function and the largest...The heredity of clusters in rapidly cooled(Zr_(50)Cu_(50))_(100-x)Al_x melts and its correlation with glass-forming ability(GFA)are studied via molecular dynamics simulations.Pair distribution function and the largest standard cluster(LSC)are adopted to characterize the local atomic structures in the(Zr_(50)Cu_(50))_(100-x)Al_(x)systems.The[12/555]icosahedra and their medium-range order(IMRO)play an important role in forming(Zr_(50)Cu_(50))_(100-x)Al_(x)metallic glasses(MGs).The fraction of[12/555],the number of IMRO,and the maximum size of IMRO in MGs increase significantly with increasing x.A tracking study further reveals that the configuration heredity of icosahedral clusters starts from supercooled liquids.No direct correlation exists between the GFA and the onset temperature of continuous or stated heredity.Instead,a larger hereditary supercooled degree of icosahedra matches with better GFA of Al-doped Zr_(50)Cu_(50)alloys.展开更多
Pd81Si19 amorphous alloys were prepared by combination methods of melt spinning and B2O3 flux treatment. A compari- son between the ribbons prepared from the fluxed ingots and the non-fluxed ones has been carried out....Pd81Si19 amorphous alloys were prepared by combination methods of melt spinning and B2O3 flux treatment. A compari- son between the ribbons prepared from the fluxed ingots and the non-fluxed ones has been carried out. The result reveals that after fluxing treatment the glass transition temperature of the as-prepared glassy ribbons is reduced while the initial crystallization tem- perature is enhanced. It results in that the supercooled liquid region (defined as the difference between the initial crystallization tem- perature and the glass transition temperature) of the glassy alloy treated with fluxing technology has been increased from 31 to 42 K. This shows that fluxing technique can enhance the glass forming ability (GFA) of the binary alloy and improve the thermal stability of supercooled liquid of the glassy alloy.展开更多
The effects of microalloying of Ti and B on the glass formation of Cu60Pr30Ni10Al10-2xTixBx(x = 0, 0.05% (atom fraction)) amorphous alloys was investigated using differential scanning calorimetry (DSC) and X-ray...The effects of microalloying of Ti and B on the glass formation of Cu60Pr30Ni10Al10-2xTixBx(x = 0, 0.05% (atom fraction)) amorphous alloys was investigated using differential scanning calorimetry (DSC) and X-ray diffraction (XRD). XRD analysis showed that mieroalloying with 0.05% Ti and 0.05% B improved the glass forming ability (GFA). The smaller difference in the Gibbs free energy between the liquid and crystalline states at the glass transition temperature (△G1-X(Tg)) and the smaller thermodynamic fragility index (△Sf/Tm, where ASf is the entropy of fusion, and Tm is the melting temperature) after mieroalloying correlated with the higher GFA.展开更多
The thermodynamic model of multicomponent chemical short range order (MCSRO) was established in order to evaluate the glass forming ability (GFA) of ternary alloys. Comprehensive numerical calculations using MSCRO sof...The thermodynamic model of multicomponent chemical short range order (MCSRO) was established in order to evaluate the glass forming ability (GFA) of ternary alloys. Comprehensive numerical calculations using MSCRO software were conducted to obtain the composition dependence of the MCSRO undercooling in Zr Ni Cu, Zr Si Cu and Pd Si Cu ternary systems. By the MCSRO undercooling principle, the composition range of Zr Ni Cu system with optimum GFA is determined to be 62.5 ~ 75 Zr, 5~ 20 Cu, 12.5 ~ 25 Ni ( n (Ni)/ n (Cu)=1~5). The TTT curves of Zr Ni Cu system were also calculated based on the MCSRO model. The critical cooling rates for Zr based alloy with deep MSCRO undercooling are estimated to be as low as 100?K/s, which is consistent with the practical cooling rate in the preparation of Zr based bulk metallic glass (BMG). The calculation also illustrates that the easy glass forming systems such as Pd based alloys exhibit an extraordinary deep MCSRO undercooling. It is shown that the thermodynamic model of MCSRO provides an effective method for the alloy designing of BMG.展开更多
By a mean field theoretical computation,the equilibrium distributions of additional Ag and Al in the crystalline phase of CuZr-based alloys were determined to occupy the two sublattices of the B2 structure randomly.Wi...By a mean field theoretical computation,the equilibrium distributions of additional Ag and Al in the crystalline phase of CuZr-based alloys were determined to occupy the two sublattices of the B2 structure randomly.With the molecular dynamics technique,the effects of Ag and Al on the enthalpy difference(ΔH) between the supercooled melt and the crystalline phase were evaluated.The improved glass forming ability of Cu45Zr45Al10 and Cu45Zr45Ag10 can be attributed to their remarkably smaller ΔH than that of CuZr.The calculated diffusion coefficients are more sensitive to the atomic weight of the component atoms than to their interaction strength.As the component atom with the largest mass,the additional Ag increases the viscosity of the supercooled melt significantly and the experimentally stronger glass formation ability of Cu45Zr45Ag10 than Cu45Zr45Al10 can be well understood.展开更多
Zr-based Bulk metallic glasses exhibit incredible corrosion resistance and glass forming ability,however,these properties need further enhancement to meet the practical use.In this study,Zr63Fe2.5Cu23Al11.5,a new type...Zr-based Bulk metallic glasses exhibit incredible corrosion resistance and glass forming ability,however,these properties need further enhancement to meet the practical use.In this study,Zr63Fe2.5Cu23Al11.5,a new type of Zr-based bulk metallic glass was fabricated.Potentiodynamic polarization techniques were used to measure the corrosion resistance of this alloy.Furthermore,crystallization behavior and kinetics of Zr63Fe2.5Cu23Al11.5 bulk metallic glass were investigated by using differential scanning calorimetry of non-isothermal model.Kissinger and Ozawa methods were used for calculating activation energies of crystallization and the mechanism of crystallization was analyzed by Johnson-Mehl-Avrami-Kolmogorow methods.The results suggest that this specified metallic glass system possesses a relatively high thermal stability and glass forming ability.Moreover,the crystallization procedure is mainly dominated by nucleation with an increasing rate.The study demonstrates that the slight composition adjustment of Zr-Fe-Cu-Al system bulk metallic glass can make a considerable contribution to higher glass forming and thermal stability as well as corrosion resistance.展开更多
Nd55-x Al10+x Fe15 (x =0, 5, 10) bulk glass-forming alloys with distinct glass transition in differential scanning calorimetry (DSC) traces were obtained by suction casting, The glass forming ability (GFA) of t...Nd55-x Al10+x Fe15 (x =0, 5, 10) bulk glass-forming alloys with distinct glass transition in differential scanning calorimetry (DSC) traces were obtained by suction casting, The glass forming ability (GFA) of the alloys was investigated. It was found that the reduced glass transition temperature (Trg) and the parameter γ of the alloys increased with the increasing concentration of Al. The glass formation enthalpy of the alloys was calculated based on Miedema's model, and it was suggested that the GFA of the alloys could be enhanced by the decrease of the glass formation enthalpy with Al additions.展开更多
The glass forming ability (GFA), microstructure and magnetic property in (Nd60Al10Ni10)Cu20-xFex (0≤ x≤ 20) alloys were investigated by using X-ray diffraction (XRD), differential scanning calorimetry (DSC), high re...The glass forming ability (GFA), microstructure and magnetic property in (Nd60Al10Ni10)Cu20-xFex (0≤ x≤ 20) alloys were investigated by using X-ray diffraction (XRD), differential scanning calorimetry (DSC), high resolution transmission electron mi- croscopy (HRTEM) and magnetic property measurement. It is shown that the GFA of the alloys decreases with Fe content. The sam- ples for bulk cylinders with x≤10 show a distinct endothermic peak in the DSC traces due to a glass transition in the range of 421-438 K. With further increasing Fe, the glass transition is masked by the crystallization. The microstructure of the Nd-based alloy can change progressively from full glassy state into composite state with nanocrystalline particles in the glassy matrix indicating the glass forming ability degrades with increasing Fe. The average size of nanocrystals increases with Fe and the distribution changes from homogenous to heterogeneous. The magnetic property varies from paramagnetic to hard magnetic when the Fe content increases up to about 4at% indicating that the magnetic property is related to the metastable phases.展开更多
The glass-forming ability (GFA) of Nd70-xFe2oAl10Yx and Nd60-xFe30Al10Yx (0< x <15) alloys produced by Cu mold casting was investigated. Except Y=5 at. pct, bulk amorphous Nd70-xFe20Al10Yx alloys up to 2 mm in d...The glass-forming ability (GFA) of Nd70-xFe2oAl10Yx and Nd60-xFe30Al10Yx (0< x <15) alloys produced by Cu mold casting was investigated. Except Y=5 at. pct, bulk amorphous Nd70-xFe20Al10Yx alloys up to 2 mm in diameter were obtained. The GFA for Nd60-xFe30Al10Yx alloys, however, was found to decrease with increase of Y due to the increasing compositional deviation from the original eutectic point of Nd60Fe30Al10 alloy. The Nd60Fe20Al10Y10 and Nd60Fe30Al10 alloy exhibit the largest GFA and can be cast into bulk amorphous cylindrical specimens of 3 mm in diameter. The melting temperature or/and the reduced crystallization temperature is closely related to the GFA of Y-containing alloys. The bulk amorphous cylinder for the Nd55Fe20Al10Y15 alloy shows a distinct glass transition temperature and a wide supercooled liquid region before crystallization. The crystallization temperature, Tg, and the supercooled liquid region, TX, are 776 K and 58 K, respectively. The GFA and thermal stability of the Nd-Fe-AI-Y alloys were discussed.展开更多
The thermal stability and glass-forming ability of Y56-xCexCo20Al24 (x=15, 20, 25, 28, 38, 41, 44) bulk metallic glasses with a diameter of 5 mm were investigated by differential scanning calorimetry and X-ray diffrac...The thermal stability and glass-forming ability of Y56-xCexCo20Al24 (x=15, 20, 25, 28, 38, 41, 44) bulk metallic glasses with a diameter of 5 mm were investigated by differential scanning calorimetry and X-ray diffraction. The results show that the thermal stability of the alloys decreases with the addition of Ce. It has the best glass-forming ability when x=25, whose calculated values can reach about 30 mm in diameter. The effect of Ce element could be explained on the view of Miedema’s theory and elec- tronegativity difference of amorphous alloys.展开更多
Bulk metallic glasses(BMGs) with new chemical compositions(ZrCoAgAlNi) were fabricated and the effects of Ag minor addition on the glass forming ability(GFA) and crystallization kinetics were studied. The x-ray diffra...Bulk metallic glasses(BMGs) with new chemical compositions(ZrCoAgAlNi) were fabricated and the effects of Ag minor addition on the glass forming ability(GFA) and crystallization kinetics were studied. The x-ray diffraction(XRD) test was applied to identify the amorphousness of BMGs or possible crystalline phases. Using differential scanning calorimeter(DSC), the thermal stability and crystallization kinetics under a non-isothermal condition at the different heating rates were studied. Considering the heating rate dependency of glass transition and crystallization kinetics, the activation energy was evaluated and measured for the mentioned processes. It was revealed that the rise in Ag content led to the decrease in activation energy for glass transition, while the activation energy for crystallization increased. The thermal stability and GFA were also studied and it was found that the Ag addition strongly affected the inherent features of BMGs. With the increase in Ag content, the atomic mobility and structural rearrangement changed in the material and consequently, the GFA and thermal stability were significantly improved.展开更多
It has been confirmed that glass-forming ability (GFA) of supercooled liquids is related to not only liquid phase stability but also the crystallization resistance. In this paper, it is found that the liquid region ...It has been confirmed that glass-forming ability (GFA) of supercooled liquids is related to not only liquid phase stability but also the crystallization resistance. In this paper, it is found that the liquid region interval (T1 - Tg) characterized by the normalized parameter of Tg/T1 could reflect the stability of glass-forming liquids at the equilibrium state, whilst the normalization of supercooled liquid region △Tx=(Tx - Tg), i.e. △Tx/Tx (wherein T1 is the liquidus temperature, Tg the glass transition temperature, and Tx the onset crystallization temperature) could indicate the crystallization resistance during glass formation. Thus, a new parameter, defined as ζ = Tg/T1+△Tx/Tx is established to predict the GFA of supercooled liquids. In comparison with other commonly used criteria, this parameter demonstrates a better statistical correlation with the GFA for various glass-forming systems including metallic glasses, oxide glasses and cryoprotectants.展开更多
A new microstructure model is developed for amorphous alloys,so called Cluster medel, in which the amorphous phase is thought of composing of randomly distributed ordered clusters of different sizes.Thermodynamic calc...A new microstructure model is developed for amorphous alloys,so called Cluster medel, in which the amorphous phase is thought of composing of randomly distributed ordered clusters of different sizes.Thermodynamic calculation on this model deduces a parameter describing the glass forming ability of metallic alloys:α_c=(1-2.08/Φ_m)T_g/T_m,where T_g is gass transition temperature,T_m is the melting temperature,and Φ_m is entralpy change of melting.It is believed that easy glass forming alloy systems have larger values of a_c.This new criterion of GFA not only provides the theoretical background for several GFA criteria in the literature cited,but also can predict the GFA of many alloy systems more reasonably and accurately.展开更多
With the addition of Si to replace some P,Pd40.5Ni40.5SixP19-x(x=0,2.5,5,9.5,14,and 19 in atomic number fraction) bulk glassy samples with the diameter of about 5 mm were successfully prepared by use of flux treatme...With the addition of Si to replace some P,Pd40.5Ni40.5SixP19-x(x=0,2.5,5,9.5,14,and 19 in atomic number fraction) bulk glassy samples with the diameter of about 5 mm were successfully prepared by use of flux treatment and water quenching technology.With the increase of Si content,the glass forming ability of Pd40.5Ni40.5Si-xP19-x increases first for low Si content and then decreases for high Si content (Si≥9.5at%).The Pd40.50Ni40.5Si5P14 glassy alloy possesses the largest supercooled liquid region△T of 119 K,the largest reduced glass transition temperature of 0.621,and the largestγparameter of 0.460,indicating that this glassy alloy possesses very large glass forming ability and very high thermal stability.展开更多
The glass formation was investigated in the melt-spun Al-rich Al-Co-Y alloys by the microstructure evolution. The best glass former Al88Co5Y7 with the thickness of 230μm was found, and its glass forming ability (GFA...The glass formation was investigated in the melt-spun Al-rich Al-Co-Y alloys by the microstructure evolution. The best glass former Al88Co5Y7 with the thickness of 230μm was found, and its glass forming ability (GFA) was higher than that of previously reported Al88Co4Y8 alloy. This result indicates that GFA is strongly sensitive to the alloy composition in the system. The phase selection method is an effective way to locate the optimum glass formation composition rather than Trg and △Tx parameters.展开更多
Starting with Zr of two different purities, Ti-based bulk metallic glasses (BMGs) with a nominal composition of Ti40Zr25Cu12Ni3Be20 were prepared. The effect of the addition of yttrium at levels of 0.2 at.%, 0.4 at....Starting with Zr of two different purities, Ti-based bulk metallic glasses (BMGs) with a nominal composition of Ti40Zr25Cu12Ni3Be20 were prepared. The effect of the addition of yttrium at levels of 0.2 at.%, 0.4 at.%, 0.5 at.%, 0.6 at.%, and 1 at.% on the glass forming ability (GFA) of the alloy has been investigated by means of metallography, X-ray diffraction, and differential scanning calorimetry. Experimental data in-dicates that high impurity content dramatically reduces the glass forming ability. Microalloying with 0.5 at.% Y is effective in suppressing the crystalline phase formation and alleviating the detrimental effect of oxygen in the low-purity alloy. On the contrary, in the alloy contain-ing high-purity element, the effective yttrium addition is less than 0.4 at.%. The results indicate that the beneficial effect of the optimum dopants is mainly due to scavenging the oxygen impurity via the formation of innocuous phase.展开更多
A small amount of Ni was added into the binary Gd50Co50 amorphous alloy to replace Gd in order to obtain ternary Co50Gd50-xNx(x=1,2,and 3)amorphous alloys.Compared to the binary Gd50Co50 amorphous alloy,the Co50Gd50-x...A small amount of Ni was added into the binary Gd50Co50 amorphous alloy to replace Gd in order to obtain ternary Co50Gd50-xNx(x=1,2,and 3)amorphous alloys.Compared to the binary Gd50Co50 amorphous alloy,the Co50Gd50-xNx amorphous alloys show an enhanced Curie temperature(TC)with a weakened formability.The maximum magnetic entropy change(-Δ^Smpeak)of the Co50Gd50-xNx amorphous alloys is found to decrease with the increasing TC.The adiabatic temperature rise(ΔTad)of the Co50Gd47Ni3 amorphous alloy is superior to that of the Fe-based metallic glasses at room temperature.The variation of the TC and-Δ^Smpeak of the Gd50Co50 amorphous alloy with Ni addition,and the mechanism involved,were discussed.展开更多
The unusual glass-forming ability(GFA) of the Zr48Cu36Ag8Al8 alloy and the high ductility of the Zr48Cu36Ag8Al8 metallic glass-matrix composites containing Ta powder were reported.The bulk metallic glass rod with a ...The unusual glass-forming ability(GFA) of the Zr48Cu36Ag8Al8 alloy and the high ductility of the Zr48Cu36Ag8Al8 metallic glass-matrix composites containing Ta powder were reported.The bulk metallic glass rod with a diameter of 25 mm was successfully synthesized using copper mold casting for the Zr48Cu36Ag8Al8 alloy.High GFA of this alloy was found to be related to a large supercooled liquid region and a quaternary eutectic point with low melting temperature.The bulk metallic glass matrix composites were prepared by introducing extra Ta particles into the Zr48Cu36Ag8Al8 melt.The composites consist of Ta particles homogenously distributed in the Zr48Cu36Ag8Al8 metallic glass matrix.The optimum content of Ta powder is 10at%for the composite with the highest plasticity,which shows a plastic strain of 31%.展开更多
Mg87-xCuxDy13(x=22,27,32) bulk metallic glasses (BGMs) with a diameter of 6-8 mm and in-situ Mg phase reinforced Mg70Cu17Dy13 BMG matrix composite with a diameter of 3 mm have been prepared by copper mould casting...Mg87-xCuxDy13(x=22,27,32) bulk metallic glasses (BGMs) with a diameter of 6-8 mm and in-situ Mg phase reinforced Mg70Cu17Dy13 BMG matrix composite with a diameter of 3 mm have been prepared by copper mould casting. The glass forming ability (GFA) of Mg-Cu-Dy alloys have been investigated by differential scanning calorimetry (DSC) and X-Ray diffraction (XRD) and tne mechanical properties have been measured. Results show that Mg87-xCuxDy13(x=22,27,32) alloys in the Mg-Cu-Dy alloy system exhibit excellent GFA, and Mg60Cu27Dy13 alloy has the largest GFA among these alloys. And In-situ Mg phase reinforced Mg70Cu17Dy13 BMG matrix composite exhibits some work hardening and a high fracture compressive strength of 702.38 MPa and some plastic strain of 0.81%. The improvement of the mechanical properties is attributed to the fact that the Mg phase distributed in the amorphous matrix of the alloy has some effective load bearing and plastic deformation ability to restrict the expanding of shear bands and cracks and produce its own plastic deformation.展开更多
基金the National Natural Science Foundation of China(Grant No.51701071)the Natural Science Foundation of Hunan Province,China(Grant Nos.2018JJ3100 and 2018JJ2078)the Project of the Hunan Educational Department,China(Grant No.19B122)。
文摘The heredity of clusters in rapidly cooled(Zr_(50)Cu_(50))_(100-x)Al_x melts and its correlation with glass-forming ability(GFA)are studied via molecular dynamics simulations.Pair distribution function and the largest standard cluster(LSC)are adopted to characterize the local atomic structures in the(Zr_(50)Cu_(50))_(100-x)Al_(x)systems.The[12/555]icosahedra and their medium-range order(IMRO)play an important role in forming(Zr_(50)Cu_(50))_(100-x)Al_(x)metallic glasses(MGs).The fraction of[12/555],the number of IMRO,and the maximum size of IMRO in MGs increase significantly with increasing x.A tracking study further reveals that the configuration heredity of icosahedral clusters starts from supercooled liquids.No direct correlation exists between the GFA and the onset temperature of continuous or stated heredity.Instead,a larger hereditary supercooled degree of icosahedra matches with better GFA of Al-doped Zr_(50)Cu_(50)alloys.
基金This work was financially supported by the National Natural Science Foundation of China (No.50431030, 50671050)the Basic Science Research Foundation of Tsinghua University (No.091201107)the National Center for Nanoscience and Technology of China.
文摘Pd81Si19 amorphous alloys were prepared by combination methods of melt spinning and B2O3 flux treatment. A compari- son between the ribbons prepared from the fluxed ingots and the non-fluxed ones has been carried out. The result reveals that after fluxing treatment the glass transition temperature of the as-prepared glassy ribbons is reduced while the initial crystallization tem- perature is enhanced. It results in that the supercooled liquid region (defined as the difference between the initial crystallization tem- perature and the glass transition temperature) of the glassy alloy treated with fluxing technology has been increased from 31 to 42 K. This shows that fluxing technique can enhance the glass forming ability (GFA) of the binary alloy and improve the thermal stability of supercooled liquid of the glassy alloy.
基金Project supported by the National Natural Science Foundation of China (50471052)Natural Science Foundation of Shandong Province (Z2004F02)
文摘The effects of microalloying of Ti and B on the glass formation of Cu60Pr30Ni10Al10-2xTixBx(x = 0, 0.05% (atom fraction)) amorphous alloys was investigated using differential scanning calorimetry (DSC) and X-ray diffraction (XRD). XRD analysis showed that mieroalloying with 0.05% Ti and 0.05% B improved the glass forming ability (GFA). The smaller difference in the Gibbs free energy between the liquid and crystalline states at the glass transition temperature (△G1-X(Tg)) and the smaller thermodynamic fragility index (△Sf/Tm, where ASf is the entropy of fusion, and Tm is the melting temperature) after mieroalloying correlated with the higher GFA.
文摘The thermodynamic model of multicomponent chemical short range order (MCSRO) was established in order to evaluate the glass forming ability (GFA) of ternary alloys. Comprehensive numerical calculations using MSCRO software were conducted to obtain the composition dependence of the MCSRO undercooling in Zr Ni Cu, Zr Si Cu and Pd Si Cu ternary systems. By the MCSRO undercooling principle, the composition range of Zr Ni Cu system with optimum GFA is determined to be 62.5 ~ 75 Zr, 5~ 20 Cu, 12.5 ~ 25 Ni ( n (Ni)/ n (Cu)=1~5). The TTT curves of Zr Ni Cu system were also calculated based on the MCSRO model. The critical cooling rates for Zr based alloy with deep MSCRO undercooling are estimated to be as low as 100?K/s, which is consistent with the practical cooling rate in the preparation of Zr based bulk metallic glass (BMG). The calculation also illustrates that the easy glass forming systems such as Pd based alloys exhibit an extraordinary deep MCSRO undercooling. It is shown that the thermodynamic model of MCSRO provides an effective method for the alloy designing of BMG.
文摘By a mean field theoretical computation,the equilibrium distributions of additional Ag and Al in the crystalline phase of CuZr-based alloys were determined to occupy the two sublattices of the B2 structure randomly.With the molecular dynamics technique,the effects of Ag and Al on the enthalpy difference(ΔH) between the supercooled melt and the crystalline phase were evaluated.The improved glass forming ability of Cu45Zr45Al10 and Cu45Zr45Ag10 can be attributed to their remarkably smaller ΔH than that of CuZr.The calculated diffusion coefficients are more sensitive to the atomic weight of the component atoms than to their interaction strength.As the component atom with the largest mass,the additional Ag increases the viscosity of the supercooled melt significantly and the experimentally stronger glass formation ability of Cu45Zr45Ag10 than Cu45Zr45Al10 can be well understood.
基金National Key R&D Program of China(Grant No.2017YFB0702404)National Natural Science Foundation of China(Grant Nos.51901212,51701192).
文摘Zr-based Bulk metallic glasses exhibit incredible corrosion resistance and glass forming ability,however,these properties need further enhancement to meet the practical use.In this study,Zr63Fe2.5Cu23Al11.5,a new type of Zr-based bulk metallic glass was fabricated.Potentiodynamic polarization techniques were used to measure the corrosion resistance of this alloy.Furthermore,crystallization behavior and kinetics of Zr63Fe2.5Cu23Al11.5 bulk metallic glass were investigated by using differential scanning calorimetry of non-isothermal model.Kissinger and Ozawa methods were used for calculating activation energies of crystallization and the mechanism of crystallization was analyzed by Johnson-Mehl-Avrami-Kolmogorow methods.The results suggest that this specified metallic glass system possesses a relatively high thermal stability and glass forming ability.Moreover,the crystallization procedure is mainly dominated by nucleation with an increasing rate.The study demonstrates that the slight composition adjustment of Zr-Fe-Cu-Al system bulk metallic glass can make a considerable contribution to higher glass forming and thermal stability as well as corrosion resistance.
文摘Nd55-x Al10+x Fe15 (x =0, 5, 10) bulk glass-forming alloys with distinct glass transition in differential scanning calorimetry (DSC) traces were obtained by suction casting, The glass forming ability (GFA) of the alloys was investigated. It was found that the reduced glass transition temperature (Trg) and the parameter γ of the alloys increased with the increasing concentration of Al. The glass formation enthalpy of the alloys was calculated based on Miedema's model, and it was suggested that the GFA of the alloys could be enhanced by the decrease of the glass formation enthalpy with Al additions.
文摘The glass forming ability (GFA), microstructure and magnetic property in (Nd60Al10Ni10)Cu20-xFex (0≤ x≤ 20) alloys were investigated by using X-ray diffraction (XRD), differential scanning calorimetry (DSC), high resolution transmission electron mi- croscopy (HRTEM) and magnetic property measurement. It is shown that the GFA of the alloys decreases with Fe content. The sam- ples for bulk cylinders with x≤10 show a distinct endothermic peak in the DSC traces due to a glass transition in the range of 421-438 K. With further increasing Fe, the glass transition is masked by the crystallization. The microstructure of the Nd-based alloy can change progressively from full glassy state into composite state with nanocrystalline particles in the glassy matrix indicating the glass forming ability degrades with increasing Fe. The average size of nanocrystals increases with Fe and the distribution changes from homogenous to heterogeneous. The magnetic property varies from paramagnetic to hard magnetic when the Fe content increases up to about 4at% indicating that the magnetic property is related to the metastable phases.
基金This work was performed with the support of the National Development Project for Basic Scientific Research of China under grant number G2000067201 as well as the fund for the best doctor dissertation .
文摘The glass-forming ability (GFA) of Nd70-xFe2oAl10Yx and Nd60-xFe30Al10Yx (0< x <15) alloys produced by Cu mold casting was investigated. Except Y=5 at. pct, bulk amorphous Nd70-xFe20Al10Yx alloys up to 2 mm in diameter were obtained. The GFA for Nd60-xFe30Al10Yx alloys, however, was found to decrease with increase of Y due to the increasing compositional deviation from the original eutectic point of Nd60Fe30Al10 alloy. The Nd60Fe20Al10Y10 and Nd60Fe30Al10 alloy exhibit the largest GFA and can be cast into bulk amorphous cylindrical specimens of 3 mm in diameter. The melting temperature or/and the reduced crystallization temperature is closely related to the GFA of Y-containing alloys. The bulk amorphous cylinder for the Nd55Fe20Al10Y15 alloy shows a distinct glass transition temperature and a wide supercooled liquid region before crystallization. The crystallization temperature, Tg, and the supercooled liquid region, TX, are 776 K and 58 K, respectively. The GFA and thermal stability of the Nd-Fe-AI-Y alloys were discussed.
基金This work was financially supported by the National Natural Science Foundation of China (No.50201009).
文摘The thermal stability and glass-forming ability of Y56-xCexCo20Al24 (x=15, 20, 25, 28, 38, 41, 44) bulk metallic glasses with a diameter of 5 mm were investigated by differential scanning calorimetry and X-ray diffraction. The results show that the thermal stability of the alloys decreases with the addition of Ce. It has the best glass-forming ability when x=25, whose calculated values can reach about 30 mm in diameter. The effect of Ce element could be explained on the view of Miedema’s theory and elec- tronegativity difference of amorphous alloys.
文摘Bulk metallic glasses(BMGs) with new chemical compositions(ZrCoAgAlNi) were fabricated and the effects of Ag minor addition on the glass forming ability(GFA) and crystallization kinetics were studied. The x-ray diffraction(XRD) test was applied to identify the amorphousness of BMGs or possible crystalline phases. Using differential scanning calorimeter(DSC), the thermal stability and crystallization kinetics under a non-isothermal condition at the different heating rates were studied. Considering the heating rate dependency of glass transition and crystallization kinetics, the activation energy was evaluated and measured for the mentioned processes. It was revealed that the rise in Ag content led to the decrease in activation energy for glass transition, while the activation energy for crystallization increased. The thermal stability and GFA were also studied and it was found that the Ag addition strongly affected the inherent features of BMGs. With the increase in Ag content, the atomic mobility and structural rearrangement changed in the material and consequently, the GFA and thermal stability were significantly improved.
基金Project supported by National Science Council, Taiwan, China (Grant No NSC 94-2216-E-110-010)post-doc sponsorship from National Science Council, Taiwan, China (Grant No NSC 95-2816-E-110-001)
文摘It has been confirmed that glass-forming ability (GFA) of supercooled liquids is related to not only liquid phase stability but also the crystallization resistance. In this paper, it is found that the liquid region interval (T1 - Tg) characterized by the normalized parameter of Tg/T1 could reflect the stability of glass-forming liquids at the equilibrium state, whilst the normalization of supercooled liquid region △Tx=(Tx - Tg), i.e. △Tx/Tx (wherein T1 is the liquidus temperature, Tg the glass transition temperature, and Tx the onset crystallization temperature) could indicate the crystallization resistance during glass formation. Thus, a new parameter, defined as ζ = Tg/T1+△Tx/Tx is established to predict the GFA of supercooled liquids. In comparison with other commonly used criteria, this parameter demonstrates a better statistical correlation with the GFA for various glass-forming systems including metallic glasses, oxide glasses and cryoprotectants.
文摘A new microstructure model is developed for amorphous alloys,so called Cluster medel, in which the amorphous phase is thought of composing of randomly distributed ordered clusters of different sizes.Thermodynamic calculation on this model deduces a parameter describing the glass forming ability of metallic alloys:α_c=(1-2.08/Φ_m)T_g/T_m,where T_g is gass transition temperature,T_m is the melting temperature,and Φ_m is entralpy change of melting.It is believed that easy glass forming alloy systems have larger values of a_c.This new criterion of GFA not only provides the theoretical background for several GFA criteria in the literature cited,but also can predict the GFA of many alloy systems more reasonably and accurately.
基金supported by the National Basic Research Priorities Program of China(No.2007CB613905)the National Natural Science Foundation of China(Nos.50671050 and 50971073)
文摘With the addition of Si to replace some P,Pd40.5Ni40.5SixP19-x(x=0,2.5,5,9.5,14,and 19 in atomic number fraction) bulk glassy samples with the diameter of about 5 mm were successfully prepared by use of flux treatment and water quenching technology.With the increase of Si content,the glass forming ability of Pd40.5Ni40.5Si-xP19-x increases first for low Si content and then decreases for high Si content (Si≥9.5at%).The Pd40.50Ni40.5Si5P14 glassy alloy possesses the largest supercooled liquid region△T of 119 K,the largest reduced glass transition temperature of 0.621,and the largestγparameter of 0.460,indicating that this glassy alloy possesses very large glass forming ability and very high thermal stability.
基金supported by the National Natural Science Foundation of China(Grant Nos.50471075,50471076).
文摘The glass formation was investigated in the melt-spun Al-rich Al-Co-Y alloys by the microstructure evolution. The best glass former Al88Co5Y7 with the thickness of 230μm was found, and its glass forming ability (GFA) was higher than that of previously reported Al88Co4Y8 alloy. This result indicates that GFA is strongly sensitive to the alloy composition in the system. The phase selection method is an effective way to locate the optimum glass formation composition rather than Trg and △Tx parameters.
基金supported in part by the National Natural Science Foundation of China (No. 50571018)the National Basic Research Program of China (No. 2007CB613903)
文摘Starting with Zr of two different purities, Ti-based bulk metallic glasses (BMGs) with a nominal composition of Ti40Zr25Cu12Ni3Be20 were prepared. The effect of the addition of yttrium at levels of 0.2 at.%, 0.4 at.%, 0.5 at.%, 0.6 at.%, and 1 at.% on the glass forming ability (GFA) of the alloy has been investigated by means of metallography, X-ray diffraction, and differential scanning calorimetry. Experimental data in-dicates that high impurity content dramatically reduces the glass forming ability. Microalloying with 0.5 at.% Y is effective in suppressing the crystalline phase formation and alleviating the detrimental effect of oxygen in the low-purity alloy. On the contrary, in the alloy contain-ing high-purity element, the effective yttrium addition is less than 0.4 at.%. The results indicate that the beneficial effect of the optimum dopants is mainly due to scavenging the oxygen impurity via the formation of innocuous phase.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51671119 and 51871139)the Chongqing Research Program of Basic Research and Frontier Technology,China(Grant No.cstc2018jcyjAX0329 and cstc2018jcyjAX0444)the Key Project of Science and Technology Research Program of Chongqing Education Commission of China(Grant No.KJZD-K201900501).
文摘A small amount of Ni was added into the binary Gd50Co50 amorphous alloy to replace Gd in order to obtain ternary Co50Gd50-xNx(x=1,2,and 3)amorphous alloys.Compared to the binary Gd50Co50 amorphous alloy,the Co50Gd50-xNx amorphous alloys show an enhanced Curie temperature(TC)with a weakened formability.The maximum magnetic entropy change(-Δ^Smpeak)of the Co50Gd50-xNx amorphous alloys is found to decrease with the increasing TC.The adiabatic temperature rise(ΔTad)of the Co50Gd47Ni3 amorphous alloy is superior to that of the Fe-based metallic glasses at room temperature.The variation of the TC and-Δ^Smpeak of the Gd50Co50 amorphous alloy with Ni addition,and the mechanism involved,were discussed.
基金supported by Grant-In-Aid for Scientific Research(C)(No.19560689)
文摘The unusual glass-forming ability(GFA) of the Zr48Cu36Ag8Al8 alloy and the high ductility of the Zr48Cu36Ag8Al8 metallic glass-matrix composites containing Ta powder were reported.The bulk metallic glass rod with a diameter of 25 mm was successfully synthesized using copper mold casting for the Zr48Cu36Ag8Al8 alloy.High GFA of this alloy was found to be related to a large supercooled liquid region and a quaternary eutectic point with low melting temperature.The bulk metallic glass matrix composites were prepared by introducing extra Ta particles into the Zr48Cu36Ag8Al8 melt.The composites consist of Ta particles homogenously distributed in the Zr48Cu36Ag8Al8 metallic glass matrix.The optimum content of Ta powder is 10at%for the composite with the highest plasticity,which shows a plastic strain of 31%.
基金Funded by the National Natural Youth Science Foundation of China (No.50901038)
文摘Mg87-xCuxDy13(x=22,27,32) bulk metallic glasses (BGMs) with a diameter of 6-8 mm and in-situ Mg phase reinforced Mg70Cu17Dy13 BMG matrix composite with a diameter of 3 mm have been prepared by copper mould casting. The glass forming ability (GFA) of Mg-Cu-Dy alloys have been investigated by differential scanning calorimetry (DSC) and X-Ray diffraction (XRD) and tne mechanical properties have been measured. Results show that Mg87-xCuxDy13(x=22,27,32) alloys in the Mg-Cu-Dy alloy system exhibit excellent GFA, and Mg60Cu27Dy13 alloy has the largest GFA among these alloys. And In-situ Mg phase reinforced Mg70Cu17Dy13 BMG matrix composite exhibits some work hardening and a high fracture compressive strength of 702.38 MPa and some plastic strain of 0.81%. The improvement of the mechanical properties is attributed to the fact that the Mg phase distributed in the amorphous matrix of the alloy has some effective load bearing and plastic deformation ability to restrict the expanding of shear bands and cracks and produce its own plastic deformation.