Origin of the Yueguang gold deposit in Xinhua, Hunan Province, South China: insights from fl uid inclusion and hydrogen–oxygen stable isotope analysis

The Yueguang gold deposit is located in Fengjia,Xinhua County,Hunan Province,South China.It represents a recently discovered small-scale gold deposit situated in the southwestern region of the Jiangnan Orogenic Belt,west of the Baimashan granitic batholith.In order to discern the characteristics of the ore-formingfluids,the underlying mineralization processes,and establish a foundation for the origin of the Yueguang gold depositfluid inclusion micro-thermometry,as well as quartz hydrogen and oxygen isotope analysis,have been carried out on samples obtained from various stages of mineralization.The hydrothermal miner-alization stages within the Yueguang gold deposit can be categorized into three stages:(i)the barren,pre-ore quartz-pyrite stage(Stage Ⅰ),the quartz-pyrite-gold stage(Stage Ⅱ),and the post-ore quartz-carbonate stage(Stage Ⅲ),with the second stage being the main mineralization stage.Thefluid inclusions identified in samples from the main min-eralization stage can predominantly be described with the NaCl–H_(2)O and CO_(2)–NaCl–H_(2)O systems.These inclusions display homogenization temperatures ranging from 158.8 to 334.9℃,and thefluid salinity ranges from 0.3%to 4.0%(wt.%NaCl equiv.).Laser Raman spectroscopy analysis of individual inclusions further reveals the presence of gas-phases such as CO_(2),CH_(4),and N_(2).Isotopic analysis indicatesδ^(18)Ofluid values ranging from 3.95 to 6.7‰ and δDH_(2)O values ranging from-71.9 to-55.7‰.These results indi-cate that the ore-formingfluid of the Yueguang gold deposit belongs to metamorphic hydrothermalfluids of middle-low temperature and low salinity.In the process of ore formation,gold is transported in the form of Au(HS)2-complexes,with gold deposition being driven byfluid immiscibility.Therefore,the Yueguang gold deposit is categorized as an orogenic gold deposit dominated by metamorphic hydrother-malfluid.It may become a new target for gold exploration in the Baimashan region,central Hunan Province.

The first discovery of Xinlong epithermal gold deposit in southern margin of the Bangonghu-Nujiang metallogenic belt: A new expansion of gold prospecting in Northern Tibet

The Xinlong gold deposit is located in Niyma County,Naqu area of Tibet and was discovered by the Institute of Mineral Resources,Chinese Academy of Geological Sciences through the 1∶50000 mineral geological survey.The ore bodies occur in the Zenong Group volcanic rocks in the middle section of the central Lhasa subterrane and are structurally controlled by the NNW-striking faults.Four ore bodies have been found,exhibiting cloddy,dense-sparse,disseminated,and breccia structures.The ore minerals are mainly tetrahedrite group minerals,and other ore minerals include pyrite,chalcopyrite,nevskite,bornite,anglesite,native gold,and silver-gold bearing selenide,etc.The types of alteration are dominated by silicification,as well as middle-and high-graded argillization.The alteration mineral assemblages contain quzrtz,pyrophyllite,and kaolinite.The Zaliela Formation volcanic rocks of Zenong Group are silicified by later hydrothermal fluid with vuggy quartz in some fractured zones.The middle-and high-graded argillization are characterized by pyrophyllitization and kaolinization.The Xinlong gold deposit shows great metallogenetic potentiality and has been revealed by 1∶10000 geological mapping,IP sounding,and trial trenching in the mining area.Combined with the regional metallogenic geological setting,we suppose that a potential epithermal gold belt probably exists in the middle of the Lhasa terrane.The discovery of the Xinlong gold deposit opens a new chapter for the gold prospecting in Northern Tibet.

Microthermometry and Synchrotron Radiation X-ray Fluorescence Analysis of Fluid Inclusions in the Dongping Gold Deposit,Northern Margin of the North China Craton

To shed light on the genesis of the Dongping deposit and reveal the behaviour of CO_(2),Au and other ore elements(e.g.,Cu,Fe,Zn,As,Sb,Co etc.)in ore-forming fluids,petrographic,microthermometric and synchrotron radiation X-ray fluorescence(SRXRF)analyses of fluid inclusions were conducted.The ore-forming fluid is characterized as an H_(2)O-CO_(2)-NaCl system with medium-high temperatures and low salinity.Four mineralization stages are identified,namely,feldsparquartz(stage 1);pyrite-white quartz(stage 2);sulfide-smoky grey quartz(stage 3);and carbonate-quartz(stage 4).Three types of inclusions were distinguished,based on fluid composition,phase assemblages and mode of homogenization.Type A:H_(2)O-rich fluid inclusions show 2 phases(liquid H_(2)O(LH_(2)O)+vapour H_(2)O(VH_(2)O))at room temperature and homogenize to the liquid phase.Type B:H_(2)O-CO_(2)fluid inclusions contain 2–3 phases(liquid H_(2)O(LH_(2)O)+vapour CO_(2)(VCO_(2));liquid H_(2)O(LH_(2)O)+liquid CO_(2)(LCO_(2)));liquid H_(2)O(LH_(2)O)+liquid CO_(2)(LCO_(2))+vapour CO_(2)(VCO_(2)))at room temperature and homogenized to the liquid H_(2)O phase.Type C:H_(2)O-CO_(2)fluid inclusions show 2 phases(liquid H_(2)O(LH_(2)O)+liquid CO_(2)(LCO_(2))at room temperature and homogenize to a critical state.CO_(2)is clearly more enriched in the fluid inclusions of stages 2 and 3 than in stage 1.Stage 1 is dominated by type A(H_(2)O-rich)inclusions with homogenization temperatures(Th)of 220–359℃and salinities of 1.1–3.1 wt%NaCl equivalent.Type B(CO_(2)-rich)inclusions gradually increase in stages 2 and 3.The Th range of type B inclusions in stage 2 is 241–397℃with salinities of 2.2–6.9 wt%NaCl equivalent;the Th range of type A inclusions is 217–373℃with salinities of 1.2–8.1 wt%NaCl equivalent.The Th range of type B inclusions in stage 3 is 215–361℃with salinities of 2.9–6.1 wt%NaCl equivalent;the range of type A inclusions is 158–351℃with a salinity of 0.7–5.5 wt%NaCl equivalent.Stage 4 is characterized by type A with Th of 151–250℃and salinities of 0.9–8.3 wt%NaCl equivalent.The mapping results show that elements As,Te and Sb are more concentrated in vapour CO_(2)than in liquid H_(2)O at room temperature,which suggests that vapour components are more able to transport elements when phase separation occurs.The SRXRF quantitative results show that Au,Cl,S and some other metals are obviously more enriched in the fluid inclusions of stages 2 and 3 than those in stage 1.Additionally,the contents of S in stages 1–3 are much lower than those of Cl,which suggests that gold might migrate mainly in the form of a gold-chloride complex.Au is more enriched in type B fluid inclusions than in type A fluid inclusions,which suggests that the enrichment and migration of gold are closely related to CO_(2)and CO_(2)plays a critical role in the migration and enrichment of gold.The trace elements in the fluid have a similar change trend to those in the Yanshanian syenogranite distributed in the southeastern part of the mining area,which may provide some evidence for an intrusion-related genesis for the Dongping gold deposit.

In Situ Rb-Sr Dates of Muscovite and Sulfur Isotope of Pyrite from the Yangshan Gold Deposit in Western Qinling,China

Located along the southern part of the West Qinling orogenic belt,the Yangshan gold deposit is one of the largest in China.The major gold ores of Yangshan are disseminated in metasedimentary host rocks with minor native gold amounts in stibnite-gold quartz veins.Pyrite and arsenopyrite are the major Au-bearing minerals.Hydrothermal muscovite from gold-bearing quartz veins was dated using the in situ Rb-Sr method to determine the formation age of the Yangshan gold deposit.The Rb-Sr isochron date of the muscovite yielded 210.1±5.6 Ma(MSWD=1.2).This date is near the lower end of the period of the mineralized granitic dykes(210.49-213.10 Ma).Two stages of gold enriching process are recognized in the gold-bearing pyrite:the first is incorporated with the Co,Cu,As,Ni enrichment;and the second is accompanied by Bi,Co,Ni,Pb,Cu,Sb concentration.The in-situ sulfur isotopic values of pyrites show a restrictedΔ34s range of-1.43‰to 2.86‰with a mean value of 0.43‰.Trace-element mapping and in-situ sulfur isotopic analysis of pyrite suggest that the sulfur deposits are likely derived from a magmatic source and likely assimilated by sulfur from the sedimentary bedrock.Thus,magmatism plays a critical role in the formation of the Yangshan gold deposit.

Correlations between trace elements in pyrite and gold mineralization of gold deposits on the North China platform

By studying both the microscopic physical and chemical typomorphic characteristics of typical mineral pyrite samples associated with representative gold deposits on the north-central margin of the North China Platform,this paper seeks to identify macroscopic metallogenic mechanisms of gold deposits and to reveal the formation mechanism of lattice gold in pyrite.Typomorphic characteristics of pyrite reveal that pyrite grain size has a negative correlation with gold content.Cubic pyrite,as the dominant crystal form,contains more gold than pentagonal dodecahedral pyrite.Both pyrite crystal forms and chemical compositions indicate that the replacement style of gold deposit formed in a low saturability,low sulfur fugacity,and at temperatures either much higher or much lower than its best forming temperature;comparatively,that of the quartz vein style of gold deposit occurred under conditions with the best temperature,rich in sulfur,and with high sulfur fugacity.The Au/Ag ratios of the pyrites show that both the replacement and quartz vein styles of deposits are mesothermal and hypothermal,while the Co/Ni ratios of the pyrites indicate that the quartz vein style is of magmatic-hydrothermal origin.The X-ray diffraction intensity of pyrite rich in gold is lower than that of pyrite poor in gold at the quartz vein style.In general,with an increase in gold content in pyrite,the total sum intensityΣI decreases.The pyroelectricity coefficient has a negative correlation trend with the values of(Co+Ni+Se+Te)-As and(Co+Ni+Se+Te)/As.The pyrite pyroelectricity of the replacement style is N-type,indicating that it formed under low sulfur fugacity,while that of the quartz vein style is a mixture of P-N types,indicating that it formed under high sulfur fugacity.On the pyroelectricity-temperature diagram,pyrite of the replacement style is mainly distributed between 200 and 270°C,while that of the quartz vein style varies between 90–118 and274–386°C,demonstrating a multistage forming process.In contrast to previous researchers'conclusions,the authors confirm the existence of lattice gold in pyrites through the use of an electron paramagnetic resonance(EPR)test.Au in the form of Au~+,entering pyrite as an isomorph and producing electron–hole centers,makes the centers produce spin resonance absorption and results in EPR absorption peak II.The intensity of auriferous pyrite absorption peak II has certain direct positive correlations with pyrite gold content.The#I and#III absorption peaks of pyrites possibly result from the existence of Ni^(2+)and/or Cu^(2+).γ1,γ2,andγ3 are the strongest and most typical absorption peaks of the infrared spectra of the pyrites.Generally,with the increase in gold content in the pyrite samples,γ1,γ2,andγ3 tend to shift to higher wavenumbers,and the gold content in the pyrite samples has a positive correlation with their relative absorbance.

Genesis, metallogenic model, and prospecting prediction of the Nibao gold deposit in the Guizhou Province, China

Southwestern Guizhou province is one of China’s most important distribution areas of Carlin-type gold deposits. The Nibao deposit is a typical gold deposit in southwestern Guizhou. To elucidate the genesis of the Nibao gold deposit, establish a metallogenic model, and guide prospecting prediction, we systematically collected previously reported geological, geochemical, and dating data and discussed the genesis of the Nibao gold deposit,based on which we proposed the metallogenic model.Earlier works show that the Nibao anticline, F1 fault, and its hanging wall dragged anticline(Erlongqiangbao anticline) were formed before or simultaneously with gold mineralization, while F2, F3, and F4 faults postdate gold mineralization. Regional geophysical data showed extensive low resistivity anomaly areas near the SBT(the product of tectonic slippage and hydrothermal alteration)between the P2/P3 and the strata of the Longtan Formation in the SSE direction of Nibao anticline in the lower plate of F1 and hanging wall dragged anticline(Erlongqiangbao anticline), and the anomaly areas are distributed within the influence range of anticlines. Simultaneously, soil and structural geochemistry show that F1, Nibao anticline,Erlongqiangbao anticline, and their transition areas all show good metallogenic elements(Au, As, and S) assemblage anomalies, with good metallogenic space and prospecting possibilities. There are five main hypotheses about the source of ore-forming fluids and Au in the Nibao gold deposit:(1) related to the Emeishan mantle plume activity;(2) source from the Emeishan basalt;(3) metamorphic fluid mineralization;(4) basin fluid mineralization;(5) related to deep concealed magmatic rocks;of these, the mainstream understanding is the fifth speculation. It is acknowledged that the ore-forming fluids are hydrothermal fluids with medium–low temperature, high pressure, medium–low salinity, low density, low oxygen fugacity, weak acidity, weak reduction, and rich in CO_(2)and CH_(4). The fluid pressure is 2–96.54 MPa, corresponding to depths of 0.23–3.64 km. The dating results show that the metallogenic age is ~141 Ma, the extensional tectonic environment related to the westward subduction of the Pacific Plate. Based on the above explanation, the genetic model related to deep concealed magmatic rocks of the Nibao gold deposit is established, and favorable prospecting areas are outlined;this is of great significance for regional mineral exploration and studying the genesis of gold deposits.

M agmatic Gold Mineralization in the Western Qinling Orogenic Belt: Geology and Metallogenesis of the Baguamiao,Liba and Xiaogouli Gold Deposits

The superlarge Baguamiao, large Liba and Xiaogouli gold deposits represent three typical gold deposits different from the Carlin type in the western Qinling Orogenic Belt. Based on Ar-Ar dating of quartz from ores, U-Pb dating of single zircon from granite, tracing of H and O isotopes and studies on the mineralogy and texture of spots and bleached alteration developed in wall rocks, this paper focuses the relations between gold deposits and granite to clarify the origin of gold deposits and the metallogenesis in the tectonic evolution of the Qinling Orogenic Belt. The comprehensive studies show that the age of the granite (148.1-244 Ma) is identical with that of the gold deposits (131.91-232.56 Ma). It is suggested that the granite has close temporal, spatial and genetic relationship with the gold deposits. The granite provides a heat source, water source and considerable amount of ore-forming material. Finally, it is concluded that the orogeny by collision, emplacement of the granite and positioning of the gold deposits represent a successive process. Both the granite and gold deposits resulted from the syn-orogeny and post-orogeny tectonic evolution.

Decrepitation Thermometry and Compositions of Fluid Inclusions of the Damoqujia Gold Deposit,Jiaodong Gold Province,China:Implications for Metallogeny and Exploration

The recently discovered Damoqujia （大磨曲家） gold deposit is a large shear zone-hosted gold deposit of disseminated sulphides located in the north of the Zhaoping （招平） fault zone, Jiaodong （胶东） gold province, China. In order to distinguish the temperature range of cluster inclusions from different mineralization stages and measure their compositions, 16 fluid inclusions and 5 isotopic geochemistry samples were collected for this study. Corresponding to different mineralization stages, the multirange peaks of quartz decrepitation temperature （250-270, 310-360 and 380-430℃） indicate that the activity of ore-forming fluids is characterized by multistage. The ore-forming fluids were predominantly of high-temperature fluid system （HTFS） by CO2-rich, and SO4^2--K^＋ type magmatic fluid during the early stage of mineralization and were subsequently affected by low-temperature fluid system （LTFS） of CH4-rich, and Cl^--Na^＋/Ca^2＋ type meteoric fluid during the late stage of mineralization. Gold is transferred by Au-HS^- complex in the HTFS, and Au-Cl^- complex can be more important in the LTFS. The transition of fluids from deeper to shallow environments results in mixing between the HTFS and LTFS, which might be one of the most key reasons for gold precipitation and large-scale mineralization. The ore-forming fluids are characterized by high-temperature, strong-activity, and superimposed mineralization, so that there is a great probability of forming large and rich ore deposit in the Damoqujia gold deposit. The main bodies are preserved and extend toward deeper parts, thereby suggesting a great potential in future.

Red Clay Type Gold Deposits in China

Red clay type gold deposits,located in the south of China,are situated not only in orogenic belts,but also in inner cratons,where climate is tropical-subtropical with clear arid and humid.The lateritic weathering crust often can be divided into five zones,including topsoil,siliceous duricrust zone,multi-color zone(or red clay zone in some deposits),pallid zone and saprolite zone from surface to the base rock,several of which are absent in some deposits.The base rocks are composed mainly of carbonate rocks with minor clastic rocks,intermediate-basic volcanic rocks and intermediate-acid and alkalic intrusions.The orebodies are mainly located in the multi-color zone with part of them in the pallid and saprolite zones.The ore sources include orebodies of Carlin-type gold deposits and porphyry gold deposits,as well as gold-rich base rocks.The red clay type gold deposits experienced early-stage endogenic gold mineralization and laterization during the Tertiary and Quaternary.The areas with endogenic gold deposits,especially Carlin-type gold deposits and porphyry gold deposits in karst depressions on the plateau,structual erosional platforms in the middle-lower mountains,and intermountain basins in southern China are well worth studying to trace red clay type gold deposits.

Geological and Fluid Inclusion Constraints on Gold Deposition Processes of the Dayingezhuang Gold Deposit, Jiaodong Peninsula, China

The Dayingezhuang gold deposit,hosted mainly by Late Jurassic granitoids on Jiaodong Peninsula in eastern China,contains an estimated 170 t of gold and is one of the largest deposits within the Zhaoping fracture zone.The orebodies consist of auriferous altered pyrite–sericite–quartz granites that show Jiaojia-type(i.e.,disseminated and veinlet)mineralization.Mineralization and alteration are structurally controlled by the NE-to NNE-striking Linglong detachment fault.The mineralization can be divided into four stages:(K-feldspar)–pyrite–sericite–quartz,quartz–gold–pyrite,quartz–gold–polymetallic sulfide,and quartz–carbonate,with the majority of the gold being produced in the second and third stages.Based on a combination of petrography,microthermometry,and laser Raman spectroscopy,three types of fluid inclusion were identified in the vein minerals:NaCl–H2 O(A-type),CO2–H2 O–NaCl(AC-type),and pure CO2(PC-type).Quartz crystals in veinlets that formed during the first stage contain mainly AC-type fluid inclusions,with rare PC-type inclusions.These fluid inclusions homogenize at temperatures of 251°C–403°C and have low salinities of 2.2–9.4 wt%NaCl equivalent.Quartz crystals that formed in the second and third stages contain all three types of fluid inclusions,with total homogenization temperatures of 216°C–339°C and salinities of 1.8–13.8 wt%NaCl equivalent for the second stage and homogenization temperatures of 195°C–321°C and salinities of 1.4–13.3 wt%NaCl equivalent for the third stage.In contrast,quartz crystals that formed in the fourth stage contains mainly A-type fluid inclusions,with minor occurrences of AC-type inclusions;these inclusions have homogenization temperatures of 106°C–287°C and salinities of 0.5–7.7 wt%NaCl equivalent.Gold in the ore-forming fluids may have changed from Au(HS)0 as the dominant species under acidic conditions and at relatively high temperatures and f O2 in the early stages,to Au(HS)2–under neutral-pH conditions at lower temperatures and f O2 in the later stages.The precipitation of gold and other metals is inferred to be caused by a combination of fluid immiscibility and water–rock interaction.

Geology and mineralization of the Sanshandao supergiant gold deposit(1200 t)in the Jiaodong Peninsula,China:A review

The Jiaodong Peninsula in Shandong Province,China is the world’s third-largest gold metallogenic area,with cumulative proven gold resources exceeding 5000 t.Over the past few years,breakthroughs have been made in deep prospecting at a depth of 500‒2000 m,particularly in the Sanshandao area where a huge deep gold orebody was identified.Based on previous studies and the latest prospecting progress achieved by the project team of this study,the following results are summarized.(1)3D geological modeling results based on deep drilling core data reveal that the Sanshandao gold orefield,which was previously considered to consist of several independent deposits,is a supergiant deposit with gold resources of more than 1200 t(including 470 t under the sea area).The length of the major orebody is nearly 8 km,with a greatest depth of 2312 m below sea level and a maximum length of more than 3 km along their dip direction.(2)Thick gold orebodies in the Sanshandao gold deposit mainly occur in the specific sections of the ore-controlling fault where the fault plane changes from steeply to gently inclined,forming a stepped metallogenic model from shallow to deep level.The reason for this strong structural control on mineralization forms is that when ore-forming fluids migrated along faults,the pressure of fluids greatly fluctuated in fault sections where the fault dip angle changed.Since the solubility of gold in the ore-forming fluid is sensitive to fluid pressure,these sections along the fault plane serve as the target areas for deep prospecting.(3)Thermal uplifting-extensional structures provide thermodynamic conditions,migration pathways,and deposition spaces for gold mineralization.Meanwhile,the changes in mantle properties induced the transformation of the geochemical properties of the lower crust and magmatic rocks.This further led to the reactivation of ore-forming elements,which provided rich materials for gold mineralization.(4)It can be concluded from previous research results that the gold mineralization in the Jiaodong gold deposits occurred at about 120 Ma,which was superimposed by nonferrous metals mineralization at 118‒111 Ma.The fluids were dominated by primary mantle water or magmatic water.Metamorphic water occurred in the early stage of the gold mineralization,while the fluid composition was dominated by meteoric water in the late stage.The S,Pb,and Sr isotopic compositions of the ores are similar to those of ore-hosting rocks,indicating that the ore-forming materials mainly derive from crustal materials,with the minor addition of mantle-derived materials.The gold deposits in the Jiaodong Peninsula were formed in an extensional tectonic environment during the transformation of the physical and chemical properties of the lithospheric mantle,which is different from typical orogenic gold deposits.Thus,it is proposed that they are named“Jiaodong-type”gold deposits.

Geology, Pb Isotope Geochemistry and Ore Genesis of the Liziyuan Gold Deposit, West Qinling Orogen, Central China

The Liziyuan gold deposit, situated on the south side of the Shangdan suture zone, West Qinling Orogen, occurs in metamorphic volcanic rocks(greenschist facies) of the early Paleozoic Liziyuan Group and in Indosinian Tianzishan monzogranite. Orebodies in the Liziyuan gold field are controlled by the ductile-brittle shear zone, and by thrusting nappe faults related to the Indosinian orogeny. In detail, this paper analyzed the geological characteristics of the Liziyuan gold field, and the Pb isotopes of the Lziyuan host rocks, granitoids(Tianzishan monzogranite and Jiancaowan syenite porphyry), sulfides, and auriferous quartz veins by multiple-collector inductively coupled plasma mass spectrometry(MC-ICPMS). In addition, previous data on the sulfur, hydrogen, and oxygen isotopes were employed to discuss the possible sources of the ore-forming fluids and materials, and to further understand the tectonic setting of the Liziyuan gold deposit. The sulfides and their host rocks(Lziyuan Group), Tianzishan monzogranite and Jiancaowan syenite porphyry, and auriferous quartz veins have similar Pb isotopic compositions.Zartman’s plumbotectonic model diagram shows that most of the data for the deposit fall near the orogenic Pb evolutionary curve or within the area between the orogenic and mantle Pb evolutionary curves. In the△β-△γ diagram, which genetically classifies the lead isotopes, most of the data fall within the range of the subduction-zone lead mixed with upper crust and mantle. This indicates that a complex source of the ore lead formed in the orogenic environment. The δ34S values of the sulfides range from 3.90 to 8.50‰(average6.80‰), with a pronounced mode at 5.00‰-8.00‰. These values are consistent with that of orogenic gold deposits worldwide, indicating that the sulfur sourced mainly from reduced metamorphic fluids. The isotopic hydrogen and oxygen compositions support a predominantly metamorphic origin of the oreforming fluids, with possible mixing of minor magmatic fluids, but the late stage was dominated by meteoric water. The characteristics of the Liziyuan gold deposit formed in the Indosinian orogenic environment of the Qinling Orogen are consistent with those of orogenic gold deposits found worldwide.

Remote Sensing Study of Gold Biogeochemical Effects in the Western Guangdong-Hainan Region——A Case Study of the Hetai Gold Deposit

The vegetation has been poisoned by gold in the western Guangdong-Hainan region. The gold content ofthe leaves there is as high as 10-1961 times the abundance, the chlorophyll content is 10%-30% lower thanthat of the vegetation in metamorphic terrains and 10%-20% higher than that in granite terrains, and thecarotenoid content is 10%-44% lower than the background value. The water content of leaves is 10% to 20%lower than the background value. The cells of leaves are deformed and broken. The leaf surface shows colourspots and becomes yellow or dark green. The spectral reflectance of the leaf surface is 5%-30% higher than thebackground value: the spectral shape has shifted 5-15 nm to the short wavelength. The gray scales of eanopyon images of Landsat TM and airborne imaging scanner (AIS) are 10%-100% higher than the backgroundvalues. On Landsat TM and AIS false colour images, plants poisoned by gold display a yellow color, whichdisinguishes them from background plants. According to the spectral and image features of goldbiogeochemical effects, the author has constructed a gold information system and expert prediction system,and thus two gold target areas and two gold prospect areas have been identified rapidly, economically andaccurately in the western Guangdong-Hainan region which is extensively covered by vegetation.

Experimental Study on Gold Dissolution from Hosting Minerals of the Hadamengou Gold Deposit and the Implications

The Hadamengou gold deposit is located in western part of the northern margin of the North China craton. It is a hydrothermal deposit related to alkaline magmatism. Dissolution of Au, Fe from pyrite and iron oxide （including magnetite and hematite） individual minerals in the three main types of ore shows： in iron oxides （magnetite and hematite）, Au and Fe were dissolved simultaneously and their solubilities are positively correlated, which means Au is mainly chemical-bonded （lattice gold） and/or colloidal-adsorbed in iron oxides; while in pyrite, on the contrary, Au dissolution obviously lags behind Fe and the solubility of Au shows negative relationship with that of Fe, which indicates Au is mainly hosted as grains of elemental gold （or native gold） within pyrite. Previous studies revealed that the Hadamengou gold deposit is characterized by intensive K-feldspathization and holds high content of iron oxides occasionally replaced by sulfides, which was caused by oxidizing K-enriched alkaline fluids under a stretching geodynamic setting. These geological features, together with the high Au-content in iron oxides, comparable with that of the Olympic Dam deposit in South Australia, suggest that this deposit is the first example of iron oxide-type gold deposits in China.

Beiya Gold Deposit,Heqing County,Yunnan——One of China's Ten Biggest Gold Deposits

The Beiya gold polymetallic ore district covers an area of 22.06 km2 and is located 47.5 km away in the direction 172° from Heqing county seat of northwestern Yunnan. Its geographical coordinates are 100° 11 ′15″-100° 13′00″ E and 60°07′30″26°10′30″ N. Since its discovery in 1999 until November 31st 2013, it has had accumulative proven （111b＋122b＋331 ＋332＋333） gold metal amounts of 258.475 t at an average grade of 2.61 g/t. This deposit contains 88.98 million tons of paragenetic and associated iron ores, with TFe grade varying from 9% to 36%; metal amounts are： gold 27 t; copper 0.6188 million tons; silver 5439 t; lead 1.35 million ton; zinc 0.31 million ton; and sulfur content is 10.09 million ton. Beiya is one of the top ten largest gold deposits discovered in recent years in China.

Formation Mechanism of the Tongyu Gold Deposit,Shaanxi——A Discussion of a Model for the Formation of Syntectonic Gold Deposits

The formation of the Tongyu gold deposit, controlled by regional polyphase deformation-metamorphism.is closely related to the regional composite antiform-shear slip fracture zone. Late-stage reworking of theTaihua Group accounts for the enrichment of ore substances. It is a typical syntectonic gold deposit. The formation and evolution of the deposit involved four stages: (Ⅰ) the state of preparation of ore sub-stances, in which primary source beds originated: (Ⅱ) the stage of remobilization of ore substances, in whichregional progressive metamorphism and migmatization and thermodynamic-chemical differentiation led toremobilization of gold and its initial local concentration: (Ⅲ) the stage of gold deposit formation, in which re-gional folding produced concordant and cross shear-slip fractures and under the dynamic action gold was sepa-rated and migrated in a certain direction and concentrated to form a gold deposit: (Ⅳ) the stage ofsuperpositon, reworking and exposure of orebodies, in which the block uplifted and the deposit againunderwent reworking through faulting and mechanical differentiation.Thermodynamic mineralization played adominant role in the formation of the deposit.

The Structure of Ore-controlling Strain and Stress Fields in the Shangzhuang Gold Deposit in Shandong Province,China

The Shangzhuang altered-rock type gold ore deposit is located in the middle segment of and controlled by the Wang＇ershan fault zone in the northwestern part of the Jiaodong gold province, China. The deformation evolution, the structure of strain and stress fields and its ore-controlling effect in the Shangzhuang deposit are discussed in this paper. It is revealed that the deformation evolution has mainly undergone four phases： the early ductile deformation, the second NE-striking horizontal simple shear, the third NE-striking compression-shear and the final NW-striking compression. The mineralization happened during the third stage in which the maximum principal stress gradually transited from NE to NW. The 3-D numerical simulations of the stress field show that, on the condition that the maximum principal stress is NE-striking, the fracture development in the fault zone is favored, while when the maximum principal stress is NW-striking, the fault zone is relatively extensional and it is suitable for the influx and emplacement of ore-forming fluids. The compression-shear strain field during the mineralization is characterized by the λ-type structure, the positive flower structure, etc. Orebodies are mostly equidistantly located in the dilatational spaces, which are distributed in the integral compressional circumstances. And the dilatational spaces are developed where the fault attitude changes or shear joint systems develop. In the overall compression-shear stress field, the strain field bears self-similarity at multiple scales, including the orebody, ore deposit and orefield. The selfsimilarity of the structure comprises the subequidistant distribution of fractures at the same scale and the similar shape of the fractures at various scales. Yet, due to the special geological structure, the orebodies are mostly located in the hanging wall in the Shangzhuang deposit, which is different from most deposits in the Jiaodong gold province. Analyses of the ore-controlling stress and strain fields in the deposit provide an important basis for deposit seeking.

Structural geometry of orogenic gold deposits： Implications for exploration of world-class and giant deposits

With very few exceptions, orogenic gold deposits formed in subduction-related tectonic settings in accretionary to collisional orogenic belts from Archean to Tertiary times. Their genesis, including metal and fluid source, fluid pathways, depositional mechanisms, and timing relative to regional structural and metamorphic events, continues to be controversial. However, there is now general agreement that these deposits formed from metamorphic fluids, either from metamorphism of intra-basinal rock sequences or de-volatilization of a subducted sediment wedge, during a change from a compressional to transpressional, less commonly transtensional, stress regime, prior to orogenic collapse. In the case of Archean and Paleoproterozoic deposits, the formation of orogenic gold deposits was one of the last events prior to cratonization. The late timing of orogenic gold deposits within the structural evolution of the host orogen implies that any earlier structures may be mineralized and that the current structural geometry of the gold deposits is equivalent to that at the time of their formation provided that there has been no significant post-gold orogenic overprint. Within the host volcano-sedimentary sequences at the province scale, world-class orogenic gold deposits are most commonly located in second-order structures adjacent to crustal scale faults and shear zones, representing the first-order ore-forming fluid pathways, and whose deep lithospheric connection is marked by lamprophyre intrusions which, however, have no direct genetic association with gold deposition. More specifically, the gold deposits are located adjacent to ～10°-25° district-scale jogs in these crustal-scale faults. These jogs are commonly the site of arrays of ～70° cross faults that accommodate the bending of the more rigid components, for example volcanic rocks and intrusive sills, of the host belts. Rotation of blocks between these accommodation faults causes failure of more competent units and/or reactivation and dilation of pre-existing structures, leading to deposit-scale focussing of ore-fluid and gold deposition.Anticlinal or antiformal fold hinges, particularly those of ＇locked-up＇ folds with ～30° apical angles and overturned back limbs, represent sites of brittle-ductile rock failure and provide one of the more robust parameters for location of orogenic gold deposits.In orogenic belts with abundant pre-gold granitic intrusions, particularly Precambrian granitegreenstone terranes, the boundaries between the rigid granitic bodies and more ductile greenstone sequences are commonly sites of heterogeneous stress and inhomogeneous strain. Thus, contacts between granitic intrusions and volcano-sedimentary sequences are common sites of ore-fluid infiltration and gold deposition. For orogenic gold deposits at deeper crustal levels, ore-forming fluids are commonly focused along strain gradients between more compressional zones where volcano-sedimentary sequences are thinned and relatively more extensional zones where they are thickened. World-class orogenic gold deposits are commonly located in the deformed volcano-sedimentary sequences in such strain gradients adjacent to triple-point junctions defined by the granitic intrusions, or along the zones of assembly of micro-blocks on a regional scale. These repetitive province to district-scale geometrical patterns of structures within the orogenic belts are clearly critical parameters in geology-based exploration targeting for orogenic gold deposits.

World-class Xincheng gold deposit： An example from the giant Jiaodong gold province

The Jiaodong gold deposits are currently the most important gold resources（with Au reserves of〉4000 t） in China,and the leading gold-producing country globally（with Au production of ～428 t in2013）.Jiaodong is also considered as perhaps the only world-class to giant gold accumulation on the planet where relatively young gold ores（ca.130-120 Ma） were deposited in rocks that are 2 Ga older.The Xincheng world-class high-grade gold deposit,with a proven reserve of 〉200 t gold,is one of the largest deposits in the giant gold province of the Jiaodong Peninsula.It is located in the northwestern part of the jiaobei Uplift,and hosted by ca.132-123 Ma Xincheng quartz monzonites and monzogranites.Ore zones are structurally controlled by the NE-trending and NW-dipping Jiaojia Fault and subsidiary faults,and are mainly restricted to the footwall of the fault.The dominant disseminated- and stockworkstyle ores are associated with strong sericitization,silicification,sulfidation and K-feldspathization,and minor carbonate wallrock alteration halos.The four mineralization stages are pyrite-quartz-sericite（stage 1）,quartz-pyrite（stage 2）,quartz-polysulfide（stage 3） and quartz-carbonate（stage 4）.Gold occurs dominantly as electrum,with lesser amounts of sulfide-hosted native gold and rare native silver and argentite,normally associated with pyrite,chalcopyrite,galena and sphalerite：the latter with proven resources of about 105 t Ag,713 t Cu,and 5100 t S.There are three types of ore-related fluid inclusions：type 1 aqueous-carbonate（H2O-CO2）,type 2aqueous（liquid H2O＋vapor H2O）,and type 3 CO2（liquid CO2 and vapor CO2） inclusions.Homogenization temperatures range from 221 to 304℃ for type 1 inclusions,with salinities of 2.4-13.3 wt.%NaCl eq.,and bulk densities of 0.858-1.022 g/cm～3.The δ～（34）S（CDT） values of hydrothermal sulfides are 4.3-10.6‰and δ～（18）O values of hydrothermal quartz have a median value of 13.0‰.δD values of fluid inclusions in hydrothermal quartz have a median value of-75‰.Calculated δ～（18）Owater has a median value of 5.2‰.The timing of gold mineralization at the Xincheng gold deposit is younger than 123±1 Ma,and likely between 120.9 and 119.9 Ma.A minerals system genetic model for the probable epizonal orogenic Xincheng deposit suggests an initial medium temperature,CO2-rich,and low salinity H2O-CO2 deeply sourced metamorphic ore fluid associated with dehydration and decarbonization of subducting Paleo-Pacific lithosphere.The Jiaojia Fault constrained the migration of ore-forming fluids and metals at the brittle-ductile transition.Fluid immiscibility,caused by episodic pressure drops,led to significant high-grade gold deposition in the giant Xincheng gold deposit.

U-Pb SHRIMP Dating of Zircon from Quartz Veins of the Yangshan Gold Deposit in Gansu Province and Its Geological Significance

The Yangshan gold deposit is a super-large fine-grained disseminated gold deposit located in southern Gansu Province. Its metallogenic age has been determined by using the cathodoluminescence image and ion probe U-Pb dating techniques. It is found that zircons from quartz veinlet of the fine-grained disseminated gold ore show characters of magmatic origin with prism idiomorphism, oscillatory zoning and dominant Th/U ratios of 0.5-1.5. Three main populations of zircons are obtained, giving average 206Pb/238U ages of 197.6±1.7 Ma, 126.9±3.2 Ma and 51.2±1.3 Ma respectively. The first age corresponds to the K-Ar age of the plagiogranite dike, while the latter two ages indicate that buried Cretaceous and Tertiary intrusives exist in the orefield, suggesting that the Yangshan gold deposit was genetically related to the three magmatic hydrothermal activities. By contrast, zircons from coarse gold-bearing quartz vein in the mining area are much older than the host rock, indicating that the vein was formed earlier and was not contaminated by later magmatic fluids. It is concluded that the coupling of multiperiodic hydrothermal activities in the mining area has contributed a lot to mineralization of the Yangshan gold deposit.