Single crystal growth and characterization of 166-type magnetic kagome metals

Kagome magnets were predicted to be a good platform to investigate correlated topology band structure,Chern quantum phase,and geometrical frustration due to their unique lattice geometry.Here we reported single crystal growth of 166-type kagome magnetic materials,including HfMn_(6)Sn_(6),ZrMn_(6)Sn_(6),GdMn_(6)Sn_(6)and GdV_(6)Sn_(6),by using the flux method with Sn as the flux.Among them,HfMn_(6)Sn_(6)and ZrMn_(6)Sn_(6)single crystals were grown for the first time.X-ray diffraction measurements reveal that all four samples crystallize in HfFe6Ge6-type hexagonal structure with space group P6/mmm.All samples show metallic behavior from temperature dependence of resistivity measurements,and the dominant carrier is hole,except for GdV6Sn6 which is electron dominated.All samples have magnetic order with different transition temperatures,HfMn_(6)Sn_(6),ZrMn_(6)Sn_(6)and GdV_(6)Sn_(6)are antiferromagnetic with TN of 541 K,466 K and 4 K respectively,while GdMn_(6)Sn_(6)is ferrimagnetic with the critical temperature of about 470 K.This study will enrich the research platform of magnetic kagome materials and help explore the novel quantum phenomena in these interesting materials.The dataset of specific crystal structure parameters for HfMn_(6)Sn_(6)are available in Science Data Bank,with the link.

Single crystal growth and transport properties of narrow-bandgap semiconductor RhP_(2)

We report the growth of high-quality single crystals of RhP_(2),and systematically study its structure and physical properties by transport,magnetism,and heat capacity measurements.Single-crystal x-ray diffraction reveals that RhP_(2) adopts a monoclinic structure with the cell parameters a=5.7347(10)A,b=5.7804(11)A,and c=5.8222(11)A,space group P2_(1)/c(No.14).The electrical resistivityρ(T)measurements indicate that RhP_(2) exhibits narrow-bandgap behavior with the activation energies of 223.1 meV and 27.4 meV for two distinct regions,respectively.The temperaturedependent Hall effect measurements show electron domain transport behavior with a low charge carrier concentration.We find that RhP_(2) has a high mobilityμ_(e)~210 cm^(2)·V^(-1)·s^(-1)with carrier concentrations n_(e)~3.3×10^(18)cm^(3) at 300 K with a narrow-bandgap feature.The high mobilityμ_(e) reaches the maximum of approximately 340 cm^(2)·V^(-1)·s^(-1)with carrier concentrations n_^(e)~2×10^(18)cm^(-3)at 100 K.No magnetic phase transitions are observed from the susceptibilityχ(T)and specific heat C_(p)(T)measurements of RhP_(2).Our results not only provide effective potential as a material platform for studying exotic physical properties and electron band structures but also motivate further exploration of their potential photovoltaic and optoelectronic applications.

Review of solution growth techniques for 4H-SiC single crystal

Silicon carbide(SiC),a group IV compound and wide-bandgap semiconductor for high-power,high-frequency and high-temperature devices,demonstrates excellent inherent properties for power devices and specialized high-end markets.Solution growth is thermodynamically favorable for producing SiC single crystal ingots with ultra-low dislocation density as the crystallization is driven by the supersaturation of carbon dissolved in Si-metal solvents.Meanwhile,solution growth is conducive to the growth of both N-and P-type SiC,with doping concentrations ranging from 10^(14)to 10^(19)cm^(-3).To date,4-inch 4H-SiC substrates with a thickness of 15 mm produced by solution growth have been unveiled,while substrates of 6 inches and above are still under development.Based on top-seeded solution growth(TSSG),several growth techniques have been developed including solution growth on a concave surface(SGCS),melt-back,accelerated crucible rotation technique(ACRT),two-step growth,and facet growth.Multi-parameters of the solution growth including meniscus,solvent design,flow control,dislocation conversion,facet growth,and structures of graphite components make high-quality single crystal growth possible.In this paper,the solution growth techniques and corresponding parameters involved in SiC bulk growth were reviewed.

Single crystal growth and electronic structure of Rh-doped Sr_(3)Ir_(2)O_(7)

Ruddlesden-Popper iridate Sr_(3)Ir_(2)O_(7)is a spin-orbit coupled Mott insulator.Hole doped Sr_(3)Ir_(2)O_(7)provides an ideal platform to study the exotic quantum phenomena that occur near the metal-insulator transition(MIT)region.Rh substitution of Ir is an effective method to induce hole doping into Sr_(3)Ir_(2)O_(7).However,the highest doping level reported in Sr_(3)(Ir_(1-x)Rh_(x))_(2)O_(7)single crystals was only around 3%,which is far from the MIT region.In this paper,we report the successful growth of single crystals of Sr3(Ir_(1-x)Rh_(x))_(2)O_(7)with a doping level of~9%.The samples have been fully characterized,demonstrating the high quality of the single crystals.Transport measurements have been carried out,confirming the tendency of MIT in these samples.The electronic structure has also been examined by angle-resolved photoemission spectroscopy(ARPES)measurements.Our results establish a platform to investigate the heavily hole doped Sr_(3)Ir_(2)O_(7) compound,which also provide new insights into the MIT with hole doping in this material system.

Precipitates identification in R_2PdSi_3(R= Pr,Tb and Gd) single crystal growth

Floating zone method with optical radiation heating was applied to growing a class of R2PdSi3（R=Pr,Tb and Gd） single crystals due to its containerless melting and high stability of the floating zone.One serious problem during the single crystal growth,precipitates of secondary phases,was discussed from the following four parts：precipitates from the raw materials and preparation process,precipitates formed during the growing process,precipitates in the melts and precipitates in the grown crystals.Annealing treatment and composition shift can effectively reduce the precipitates which are not formed during the crystallization but precipitated on post-solidification cooling from the as-grown crystal matrix because of the retrograde solubility of Si.

Centimeter-sized Cs_(3)Cu_(2)I_(5)single crystals grown by oleic acid assisted inverse temperature crystallization strategy and their films for high-quality X-ray imaging

Low-dimensional halide perovskites have become the most promising candidates for X-ray imaging,yet the issues of the poor chemical stability of hybrid halide perovskite,the high poisonousness of lead halides and the relatively low detectivity of the lead-free halide perovskites which seriously restrain its commercialization.Here,we developed a solution inverse temperature crystal growth(ITCG)method to bring-up high quality Cs_(3)Cu_(2)I_(5)crystals with large size of centimeter order,in which the oleic acid(OA)is introduced as an antioxidative ligand to inhibit the oxidation of cuprous ions effieiently,as well as to decelerate the crystallization rate remarkalby.Based on these fine crystals,the vapor deposition technique is empolyed to prepare high quality Cs_(3)Cu_(2)I_(5)films for efficient X-ray imaging.Smooth surface morphology,high light yields and short decay time endow the Cs_(3)Cu_(2)I_(5)films with strong radioluminescence,high resolution(12 lp/mm),low detection limits(53 nGyair/s)and desirable stability.Subsequently,the Cs_(3)Cu_(2)I_(5)films have been applied to the practical radiography which exhibit superior X-ray imaging performance.Our work provides a paradigm to fabricate nonpoisonous and chemically stable inorganic halide perovskite for X-ray imaging.

Growth of Large Single Crystals of Nitrogenase CrFe Protein and MnFe Protein

By using the liquid/liquid diffusion method at a suitable crystallization conditions, large single and dark brown crystals (the sides of the largest crystals were 0.20 mm x 0.20 mm x 0.07 min and 0.18 mm x 0.18 mm x 0.05 mm, respectively) could be obtained from the solutions of nitrogenase CrFe protein and MnFe protein purified from a mutant UW3 of Azotobacter vinelandii Lipmarm grown in Cr- or Mn-containing but NH3-free medium. The time of crystal formation, as well as the number, size, shape and quality of crystals obviously depended on the concentrations of PEG, MgCl2 and NaCl. The liquid/liquid diffusion method seems to benefit CrFe protein and MnFe protein for the growth of large single crystals for X-ray diffraction analysis.

Growth of ZnO Single Crystal by Chemical Vapor Transport Method

ZnO crystals were grown by CVT method in closed quartz tube under seeded condition. Carbon was used as a transport agent to enhance the chemical transport of ZnO in the growth process. ZnO single crystals were grown by using GaN/sapphire and GaN/Si wafer as seeds. The property and crystal quality of the ZnO single crystals was studied by photoluminescence spectroscopy and X-ray diffraction technique.

Bulk single crystal growth of SiGe by PMCZ method

A new type of magnetic device was used to replace the conventionalelectro-magnetic field for CZSi (doped with Ge) growth. The device was composed of three permanentmagnetic rings and called PMCZ device. The lines of magnetic force are horizontally distributed atradial 360℃. Using the ring permanent magnetic field, thermal convection in melt and centrifugalpumping flows due to crystal rotation could be strongly suppressed so that the fluctuations oftemperature and micro-growth rate at solid/liquid interface could be restrained effectively. In thePMCZ condition, the growing environment of SiGe bulk single crystal was similar to the crystalgrowth in space under the condition of micro-gravity. The motion of impurities (Ge, oxygen, etc.)had been controlled by diffusion near the solid/liquid interface. Oxygen concentration became lowerand the distribution of composition became more homogeneous along longitudinal direction and acrossa radial section in the grown SiGe crystal. The mechanism of PMCZ superior to MCZ was alsodiscussed.

Crack growth behavior of SRR99 single crystal superalloy under thermal fatigue

The thermal fatigue behavior of a single crystal superalloy SRR99 was investigated. Specimens with V-type notch were tested at the peak temperatures of 900, 1000, and 1100℃. The crack growth curves as a function of the number of cycles were plotted. With the increase of peak temperature, the crack initiation life was shortened dramatically. Through optical microscopy （OM） and scanning electron microscopy （SEM） observation, it was found that multiple small cracks nucleated at the notch tip region but only one or two of them continued to develop in the following thermal cycles. The primary cracks generally propagated along a preferential direction. Microstructure changes after thermal fatigue were also discussed on the basis of SEM observation.

Single Crystal Growth and Physical Property Characterization of Non-centrosymmetric Superconductor PbTaSe_2

We report on the single crystal growth and superconducting properties of PbTaSe2 with the non-centrosymmetric crystal structure. By using the chemicM vapor transport technique, centimeter-size single crystals are success- fully obtained. The measurement of temperature dependence of electricaJ resistivity p（T） in both normal and superconducting states indicates a quasi-two-dimensional electronic state in contrast to that of polycrystalline samples. Specific heat C（T） measurement reveals a bulk superconductivity with Tc ≈ 3.75K and a specific heat jump ratio of 1.42. All these results are in agreement with a moderately electron-phonon coupled, type-g Bardeen-Cooper-Schrieffer superconductor.

Machine Learning to Instruct Single Crystal Growth by Flux Method

Growth of high-quality single crystals is of great significance for research of condensed matter physics. The exploration of suitable growing conditions for single crystals is expensive and time-consuming, especially for ternary compounds because of the lack of ternary phase diagram. Here we use machine learning(ML) trained on our experimental data to predict and instruct the growth. Four kinds of ML methods, including support vector machine(SVM), decision tree, random forest and gradient boosting decision tree, are adopted. The SVM method is relatively stable and works well, with an accuracy of 81% in predicting experimental results. By comparison,the accuracy of laboratory reaches 36%. The decision tree model is also used to reveal which features will take critical roles in growing processes.

Crystallization Growth of Single Crystal Cu by Continuous Casting

Crystallization growth of single-crystal Cu by continuous casting has been investigated using self-designed horizontal continuous casting equipment and XRD. Experimental results showed that the crystallization plane of (311), (220) and (ill) were eliminated sequentially in evolutionary process. The final growth plane of crystal was (200), the direction of crystallization was [100], the growth direction of both sides of the rod inclined to axis, and the degree of deviation of direction [100] from the crystal axis was less than 10°. In order to produce high quality single crystal, the solid-liquid interface morphology must be smooth, even be planar.

Growth, Optical, Mechanical and Dielectric Properties of Glycine Zinc Chloride NLO Single Crystals

Single crystals of Glycine Zinc Chloride (GZC) were grown from aqueous solution by slow evaporation technique. Single crystal X-ray diffraction analysis reveals that the crystal belongs to orthorhombic system with the space group Pna21.The optical transmission study reveals the transparency of the crystal in the entire visible region and the cut off wavelength has been found to be 230 nm. The optical band gap is found to be 3.40eV. The transmittance of GZC crystal has been used to calculate the refractive index (n), the extinction coefficient (K) and the real er and imaginary ei components of the dielectric constant. Mechanical studies were carried out on the as grown crystal. Dielectric constant and dielectric loss measurements were carried out at different temperatures and frequencies. Photoconductivity measurements carried out on the grown crystal reveal the negative photoconducting nature.

Single crystal growth, structural and transport properties of bad metal RhSb2

We have successfully grown an arsenopyrite marcasite type RhSb2 single crystal, and systematically investigated its crystal structure, electrical transport, magnetic susceptibility, heat capacity, and thermodynamic properties. We found that the temperature-dependent resistivity exhibits a bad metal behavior with a board peak around 200 K. The magnetic susceptibility of RhSb2 shows diamagnetism from 300 K to 2 K. The low-temperature specific heat shows a metallic behavior with a quite small electronic specific-heat coefficient. No phase transition is observed in both specific heat and magnetic susceptibility data. The Hall resistivity measurements show that the conduction carriers are dominated by electrons with ne = 8.62 × 10^(18) cm^(-3) at 2 K, and the electron carrier density increases rapidly above 200 K without change sign. Combining with ab-initio band structure calculations, we showed that the unusual peak around 200 K in resistivity is related to the distinct electronic structure of RhSb_2. In addition, a large thermopower S(T) about -140 μV/K is observed around 200 K, which might be useful for future thermoelectric applications.

Influence of vacuum degree on growth of Bi_2Te_3 single crystal

Bi2Te3single crystals were prepared by the solid-state reaction method. The effect of the vacuum on the growth of Bi2Te3 single crystals was studied with varying the oxygen content by controlling the air pressure in the silica tube. High quality Bi2Te3 single crystals have been obtained and there is no influence on the growth by an extremely small amount of oxygen in a high vacuum at 1.0 × 10^-3Pa. As the air pressure is increased at 1.0 × 10^-2Pa, oxygen only mainly impacts on the growth of the surface for the prepared samples. Micron-sized rod-like structure and flower-like clusters are observed on the surface. For the samples prepared at 1.0 × 10^-1Pa, x-ray diffraction data show that the yellow part on the surface is Bi2TeO5, while the Bi2Te3 single crystal is still the major phase as the inside part. More interestingly, various crystal morphologies are observed by scanning electron microscope for Bi2Te3 near the boundary between Bi2Te3 and Bi2TeO5.Possible growth mechanisms for Bi2Te3 with different morphologies are discussed in detail.

Single crystal growth and characterizations of iron arsenide superconductor BaFe_(2-x)Ni_xAs_2(0.0≤x≤0.12)

A series of big single crystals of BaFeFe2-xNixAs2 have been prepared by the FeAs self-flux method, with nominal nickel doping x = 0--0.12. The dimensions of the cleaved crystals are over 10~mm along ab plane and ～ 2~mm in maximum along the c direction. The measurements of x-ray diffraction, electrical resistance and magnetic property are carried out on the crystals. For the undoped parent compound BaFe2As2, both resistance and magnetization data display an anomaly associated with spin density wave and/or structural phase transition, with the transition temperatures at ～ 138~K. For Ni-doped BaFe2-xNixAs2 crystals, the superconducting critical temperature Tc ranges from 4.3~K for x=0.06 sample to 20~K for the optimally doped x=0.10 crystal.

MORPHOLOGY OF(Mn,Fe)S SINGLE CRYSTAL GROWTH IN CAST STEEL

The step pattern of single crystal growth and the morphology at equilibrium state of(Mn, Fe)S on the wall of micro-voids in ZG25 cast steel have been observed using scanning electron microscope.The face-centred cubic(Mn,Fe)S single crystal at equilibrium state is shown to be tetrakaidecahedron consisted of eight{111}planes and six{100}planes,and is a typical example of the O_h—m3m cubic crystal system.

Growth and characterization of CaCu_3Ru_4O_(12) single crystal

High-quality single crystals of A-site ordered perovskite oxides CaCu3Ru4O12 were synthesized by flux method with Cu O serving as a flux. The typical size of these single crystals was around 1 × 1 × 1 mm^3 and the lattice constant was determined to be 7.430 ± 0.0009 ？A by using x-ray single crystal diffraction. The surfaces of the samples were identified to be（100） surface. The high quality of the single crystal samples was confirmed by the rocking curve data which have a full width at half maximum of approximately 0.02 degree. The x-ray photoelectron spectroscopy measurement was performed and the temperature-dependent specific heat, magnetic susceptibility, and electric resistivity were measured along the [100]direction of the single crystals. All these measurements showed that the physical properties of Ca Cu3Ru4O12 single crystals are similar to that of polycrystals. However, the single crystals have a lower Curie susceptibility tail and a smaller residual resistivity than polycrystals, which indicates that the amount of paramagnetic impurities can be controlled by tuning the number of defects in CaCu3Ru4O12 samples.

Single Crystal Growth and Magnetoresistivity of Topological Semimetal CoSi

We report single crystal growth of CoSi, which has recently been recognized as a new type of topological semimetal hosting fourfold and sixfold degenerate nodes. The Shubnikov–de Haas quantum oscillation(QO) is observed on our crystals. There are two frequencies originating from almost isotropic bulk electron Fermi surfaces, in accordance with band structure calculations. The effective mass, scattering rate, and QO phase difference of the two frequencies are extracted and discussed.