The Curing for Modified Vinyl Ester Resin by Hexamethylene Diisocyanate and Its Influence on Performances

The commercial vinyl ester resins(VER)was modified by diphenylmethane diisocyanate(MDI)to enhance its toughness,which is called MVER.Hexamethylene diisocyanate(HDI),a common curing agent for polyurethane(PU),was found to be a reactive agent for MVER and can contribute to the toughness of MVER.Based on present experiment results,the crosslinking mechanism of MVER and HDI system is very similar to that of PU.The FTIR result shows the-NCO of HDI can react with the-OH of MVER.The microstructure of material prepared by MVER and HDI was characterized by NMR,and it was revealed that the unique microstructure leads to the good performances.The different content of HDI has an influence on the microstructure,and the microstructure gradually reduces the toughness and mechanical performances of the MVER cured with increasing concentration of reactive curing agent(HDI).This feature is consistent with a maximum in toughness as a function of the additive(HDI)content,followed by a rapid deterioration in toughness at higher concentrations.The toughness exhibits the maximum at such an HDI concentration(20wt%).Therefore,the special curing agent(HDI)and reactive mode is very important to the microstructure and mechanical properties of material.Furthermore,there should be other reactions which contribute to the curing and microstructure of the material,which needs the further research.

Slightly Cross-Linked Polyrotaxanes Made by Linking α-Cyclodextrins Entrapped in Polyrotaxanes Using Hexamethylene Diisocyanate

In this study polyrotaxane （PR）-based triblock copolymers were first synthesized via the atom transfer radical polymerization （ATRP） of N-isopropylacrylamide initiated with the self-assembly of a distal 2-bromoisobutyryl end-capped Pluronie 17R4 with a varying amount of a-cyclodextrins （a-CDs） in the presence of CuCI/PMDETA at 25 ℃ in aqueous solution. The a-CDs entrapped on the copolymer chain were then linked with hexamethylene diisocyanate to give rise to novel slightly cross-linked polyrotaxanes （SCPRs） in DMF at 45 ℃. The structures of the PR-based triblock copolymers and SCPRs were characterized by 1H NMR, 13C CP/MAS, GPC and TGA analy- ses. The number-average molecular weight of the resulting SCPRs was nearly three and five times of their precursor after linking with a low polydispersity index range of 1.08--1.28. The thermo-responsive transition of both PR-based supramolecular polymers in aqueous solution was demonstrated by turbidity measurements and the self-aggregated morphologies were also evidenced by TEM observations.

Surface Modification of Commercial Aromatic Polyamide Reverse Osmosis Membranes by Crosslinking Treatments

Crosslinking treatments for a commercially available aromatic polyamide reverse osmosis membrane were carried out to improve its chlorine resistance.The crosslinking agents including 1,6-hexanediol diglycidyl ether,adipoyl dichloride and hexamethylene diisocyanate ester with long flexible aliphatic chains and high reactivity with N-H groups were used in the experiments.Attenuated total reflective Fourier transform infrared spectra verified the successful preparation of highly crosslinked membranes by crosslinking treatments.It was suggested that the crosslinking agents were connected to membrane surface through the reactions with amine and amide Ⅱ groups,which is confirmed by surface charge measurements.Based on contact angle measurements,crosslinking treatments decreased membrane hydrophilicity by introducing methylene groups to membrane surface.With increasing amount of crosslinking agent molecules connected to membrane surface,the hydrolysis of unconnected functional groups of crosslinking agent produced polar groups and increased membrane hydrophilicity.The highly crosslinked membranes showed higher salt rejections and lower water fluxes as compared with the raw membrane.Since the active sites(N-H groups) vulnerable to free chlorine on membrane surface were eliminated by crosslinking treatments,the chlorine resistances of the highly crosslinked membranes were significantly improved by slighter changes in both water fluxes and salt rejections after chlorination.

A ONE-STEP SURFACE MODIFICATION PROCEDURE TO PEG-GRAFTED NANO-TITANIA

PEG （Polyethylene Glycol）-grafted nano-titania has been obtained in a one-step procedure using hexamethylene diisocyanate as the coupling agent and dibutyltin dilaurate as the catalyst in toluene at 80℃ and characterized qualitatively by FTIR and quantitatively by elemental analysis and thermogravimetric analysis. A comparison of nano-titania with two other commonly used inorganic nanoparticles, nano-silica and nano-alumina, is made, revealing that reactivity order is nano- silica 〉 nano-alumina 〉 nano-titania in view of PEG grafting. Possible mechanism of PEG grafting is also discussed.

Synthesis and Characterization of HDI/MDI-Polycarbonate Urethanes

A novel polycarbonate urethane was synthesized by the two-stage solution process of diisocyanates with polycarbonate diols(PCDL),in which PCDL,1,4-butanediol(BD) and mixture of 4,4 -methylenediphenyl diisocy-anate and hexamethylene diisocyanate(HDI) were soft segment,chain extender and rigid segment,respectively.The structures were characterized by using FTIR and 1H-NMR.The thermoanalysis and mechanical properties of products were measured by means of DSC,TG and other systems.The result shows that an import...

The Influence of Aziridine on the Aging of Composite Solid Rocket Propellant

Aging of a solid composite propellant containing HTPB/AP/AL was performed in order to validate the conformance of the accelerated aging data to the Arrhenius law. The main objective of the work was to examine the influence of the aziridine bonding agents family on the propellant aging. Aging of the prepared propellant samples was conducted as follows: 1. Four samples, one free of bonding agents, and three containing aziridine based bonding agents MAPO,HX-752, MAT4 were aged at 65°C. 2. Another four samples based on HX-752, MAT4 with different curing agents were aged at 65°C. The measured mechanical properties of the free bonding agent propellant samples were very far from the specifications and this illustrates the importance of the bonding agents in both the preparation and the aging phases.The prepared bonding agent 'MAT4' gave remarkable improvements of the mechanical properties comparing with HX-752 and MAPO. The aziridine bonding agents family inhibited the rate of decomposition of the propellant during the aging periods and supported the propellant matrix against decomposition at the elevate temperatures. Using of HMDI as curing agent gave slight better mechanical properties to the IPDI.