INVESTIGATION OF BEHAVIOR OF AMMONIUM SULFATE ON SURFACE OF IRON OXIDE Rong Sheng LI~*, Jing Feng CHEN, Hun YANG, Wu Yang ZHANG Dept. of Chemistry, Jilin University, Changchun 130023,

hhen ammonium sulfate-iron oxide is treated below 573 K, ammonium sulfate can spontaneously desperse on the surface of iron oxide. Simultaneously ammonium sulfate decomposes to some extent. During or after the dispersion, sulfate ion can interact with Fe atom on the surface of iron oxide to form a sort of surface sulfato complex of Fe and thus is transformed from the isolated into the bidentately bound form. Above 573 K the sulfato complex of Fe will gradually decompose with a further increase in temperature.

A novel and facile wet-chemical method for synthesis of silver microwires

A novel and facile wet-chemical method for synthesis of silver microwires was developed.The well-defined particles were prepared by adding an iron（Ⅱ） sulfate heptahydrate solution into a silver nitrate solution containing citric acid drop by drop at 50 °C.The resulting products were characterized by scanning electron microscopy and X-ray diffraction.It was found that the particles consisted of numerous silver microwires.The reaction temperature greatly affected the morphologies of the as-prepared particles.Both of the mean length and width of the silver microwires increased with the decrease of the concentration of silver nitrate.And the lower concentration was unfavorable for the formation of more silver microwires.Similar findings were also observed when the concentration of iron（Ⅱ） sulfate was decreased.The amount of citric acid also greatly affected the shape of the as-prepared particles.It was concluded that citric acid was the key role in the formation of silver microwires via the Oswald ripening mechanism.

Preparation of micro-sized and uniform spherical Ag powders by novel wet-chemical method

A novel wet-chemical method was presented for the preparation of the micro-sized and uniform spherical Ag powders on a mass-production scale.The well-defined particles were synthesized by mixing the iron(II) sulfate heptahydrate solution with silver nitrate solution directly by high-speed stirring at room temperature.It is found that a large number of micro-sized and uniform spherical particles with rough surfaces are obtained.The mass ratio of iron(II) sulfate heptahydrate to silver nitrate greatly affects the shape of particles,and when it is relatively low,spherical particles cannot be obtained.The reaction temperature has a great impact on the particle size.As the reaction temperature increases from 8 to 15°C,the mean diameter of particles decreases from 3.5 to 1.6 μm.The additive n-methyl-2-pyrrolidone improves the surface smoothness and compactness of the particles while the particle size is kept unchanged.Scanning electron microscopy,X-ray diffractometry and energy dispersive X-ray analysis were used to characterize the particle products.

Preparation of microsized silver crystals with different morphologies by a wet-chemical method

A wet-chemical method was presented for preparation of spherical, flowerlike, hexagonal, and triangular microsized silver crystals. Well-defined particles were prepared by mixing of iron（II） sulfate heptahydrate solution with silver nitrate solution at the presence of different modifiers with high-speed stirring at 8-20℃. It is found that the diameters of resulting products are 0.6-6.0 um and the morphologies of the silver microcrystals are greatly affected by the introduced modifiers. It is concluded that the microsized silver crystals with different morphologies can be synthesized by introducing appropriate modifiers at appropriate experimental parameters. Scanning electron microscopy and X-ray diffraction were used to characterize the resulting products.

Effect of Sodium Sulfate on Direct Reduction of Beach Titanomagnetite for Separation of Iron and Titanium

The effect of sodium sulfate on direct reduction of beach titanomagnetite,followed by magnetic separation,to separate iron and titanium was investigated. Direct reduced iron（ DRI） with a high Fe content,low TiO_2 content and low iron recovery was obtained after adding sodium sulfate. When the sodium sulfate dosage was increased from 0 to 10 mass%,the Fe content of the DRI increased from 90. 00 mass% to 93. 55 mass% and the TiO_2 content decreased from 1. 27 mass% to 0. 70 mass%. The reduction mechanism of sodium sulfate was investigated by X-ray diffraction（ XRD） and scanning electron microscopy（ SEM） with energy dispersive spectrometer（ EDS）. Results revealed that the metallic iron grains in the reduced ore with sodium sulfate were larger than those in the ore without sodium sulfate. Sodium sulfate promoted the migration of iron as well as the accumulation and growth of metallic iron grains by low-melting-point carnegieite and troilite formed in the redox system. Low-melting-point carnegieite decreased the melting point of the system and then promoted liquefaction. Troilite could decrease the surface tension and melting point of metallic iron grains.