Numerical study on turbulent mixed convection in inclined plane channels,from 15° to 90° (vertical),was carried out to examine the effect of inclination on fluid flow and heat transfer distributions.The turb...Numerical study on turbulent mixed convection in inclined plane channels,from 15° to 90° (vertical),was carried out to examine the effect of inclination on fluid flow and heat transfer distributions.The turbulent air flows upward or downward into the duct with one wall heated from bottom.Calculation results with several kinds of k-εtype turbulence models were used to compare the experimental data with those in literatures to determine suitable model.The dependents of Nusselt number on the inclination angle of both the buoyancy-aided and buoyancy-opposed flow are discussed.展开更多
The internal turbulent flow in conical diffuser is a very complicated adverse pressure gradient flow.DLR k-ε turbulence model was adopted to study it.The every terms of the Laplace operator in DLR k-ε turbulence mod...The internal turbulent flow in conical diffuser is a very complicated adverse pressure gradient flow.DLR k-ε turbulence model was adopted to study it.The every terms of the Laplace operator in DLR k-ε turbulence model and pressure Poisson equation were discretized by upwind difference scheme.A new full implicit difference scheme of 5-point was constructed by using finite volume method and finite difference method.A large sparse matrix with five diagonals was formed and was stored by three arrays of one dimension in a compressed mode.General iterative methods do not work wel1 with large sparse matrix.With algebraic multigrid method(AMG),linear algebraic system of equations was solved and the precision was set at 10-6.The computation results were compared with the experimental results.The results show that the computation results have a good agreement with the experiment data.The precision of computational results and numerical simulation efficiency are greatly improved.展开更多
The research is motivated by the ongoing the electromagnetic continuous casting of molten metal. The revised k-ε model considering the effect of magnetic field application was derived. The specific model equations fo...The research is motivated by the ongoing the electromagnetic continuous casting of molten metal. The revised k-ε model considering the effect of magnetic field application was derived. The specific model equations for the electromagnetic braking were used to calculate the velocity distribution in the continuous casting mold of steel. The results show that the revised k-ε model considering the effect of magnetic field application tends to suppress the production of turbulence and difference between the conventional and revised k-e model is small.展开更多
A two-equation turbulence model has been dereloped for predicting two-phase flow the two equations describe the conserration of turbulence kinetic energy and dissipation rate of that energy for the incompressible carr...A two-equation turbulence model has been dereloped for predicting two-phase flow the two equations describe the conserration of turbulence kinetic energy and dissipation rate of that energy for the incompressible carrier fluid in a two-phase flow The continuity, the momentum, K and εequations are modeled. In this model,the solid-liquid slip veloeites, the particle-particte interactions and the interactions between two phases are considered,The sandy water pipe turbulent flows are sueeessfuly predicted by this turbulince model.展开更多
In turbulence modeling, the RNG and Realizable models have important improvements in the turbulent production and dissipation terms in comparison to the Standard. The selection of the appropriate turbulence model has ...In turbulence modeling, the RNG and Realizable models have important improvements in the turbulent production and dissipation terms in comparison to the Standard. The selection of the appropriate turbulence model has an impact on the convergence and solution in STRs, and they are used in mixing, multiphase modeling or as starting solution of transient models as DES and LES. Although there are several studies with the pitched blade turbine(PBT) impeller, most of them used the Standard model as representative of all k–ε models, using structured hexahedral grids composed of low number of cells, and in some cases under axial symmetry assumptions.Accordingly, in this work the assessment of the Standard, RNG and Realizable models to describe the turbulent flow field of this impeller, using the Multiple Reference Frame(MRF) and Sliding Mesh(SM) approaches with tetrahedral domains in dense grids, is presented. This kind of cell elements is especially suitable to reproduce complex geometries. Flow velocities and turbulent parameters were verified experimentally by PIV and torque measurements. The three models were capable of predicting fairly the pumping number, the power number based on torque, and velocities. Although the RNG improved the predictions of the turbulent kinetic energy and dissipation rate, the Realizable model presented better performance for both approaches. All models failed in the prediction of the total dissipation rate, and a dependence of its value on the number of cells for the MRF was found.展开更多
A parameter estimation algorithm is introduced and used to determine the parameters in the standard k-epsilon two equation turbulence model (SKE). It can be found from the estimation results that although the paramete...A parameter estimation algorithm is introduced and used to determine the parameters in the standard k-epsilon two equation turbulence model (SKE). It can be found from the estimation results that although the parameter estimation method is an effective method to determine model parameters, it is. difficult to obtain a set of parameters for SKE to suit all kinds of separated flow and a modification of the turbulence model structure should be considered. So, a new nonlinear k-e two-equation model (NNKE) is put forward in this paper and the corresponding parameter estimation technique is applied to determine the model parameters. By implementing the NNKE to solve some engineering turbulent flows, it is shown that NNKE is more accurate and versatile than SKE. Thus, the success of NNKE implies that the parameter estimation technique may have a bright prospect in engineering turbulence model research.展开更多
Local heat transfer and flow characteristics in a round turbulent impinging jet for Re≈23 000 is predicted numerically with the RANS approach and a k-ε-fu turbulence model. The heat transfer predictions and turbulen...Local heat transfer and flow characteristics in a round turbulent impinging jet for Re≈23 000 is predicted numerically with the RANS approach and a k-ε-fu turbulence model. The heat transfer predictions and turbulence parameters are verified against the axis-symmetric free jet impingement measurements and compared with previous other turbulence models, and results show the k-ε-fu model has a good performance in predictions of the local wall heat transfer coefficient, and in agreement with measurements in mean velocity profiles at different radial positions as well. The numerical model is further used to examine the effect of the fully confined impingement jet on the local Nusselt number. Local Nusselt profiles in x and y-centerlines for the target plate over three separation distances are predicted. Compared with the experimental data, the numerical results are accurate in the central domain around the stagnation region and present a consistent structure distribution.展开更多
By modifying the Rodi assumption to take account of the influence of flow curvature, a new curvature modified algebraic stress model(CMASM) is de- veloped from the second moment closure in the generalized curvilinear ...By modifying the Rodi assumption to take account of the influence of flow curvature, a new curvature modified algebraic stress model(CMASM) is de- veloped from the second moment closure in the generalized curvilinear coordinate system. And the explicit form of this ASM, a new curvature modified nonlinear k-ε model (CMNKE), is derived in the orthogonal curvilinear coordinate system. This new nonlinear k-ε model is further validated by a numerical simulation of a two- dimensional U-type turnaround duct flow. The results show that the CMNKE can effectively capture the main characteristic of this curvature flow and simulate the damping effect of the shear stress by a convex curvature and the enhancing effect by a concave curvature. So, this model is a rational and effective simplification to the second moment closure.展开更多
文摘Numerical study on turbulent mixed convection in inclined plane channels,from 15° to 90° (vertical),was carried out to examine the effect of inclination on fluid flow and heat transfer distributions.The turbulent air flows upward or downward into the duct with one wall heated from bottom.Calculation results with several kinds of k-εtype turbulence models were used to compare the experimental data with those in literatures to determine suitable model.The dependents of Nusselt number on the inclination angle of both the buoyancy-aided and buoyancy-opposed flow are discussed.
基金Projects(59375211,10771178,10676031) supported by the National Natural Science Foundation of ChinaProject(07A068) supported by the Key Project of Hunan Education CommissionProject(2005CB321702) supported by the National Key Basic Research Program of China
文摘The internal turbulent flow in conical diffuser is a very complicated adverse pressure gradient flow.DLR k-ε turbulence model was adopted to study it.The every terms of the Laplace operator in DLR k-ε turbulence model and pressure Poisson equation were discretized by upwind difference scheme.A new full implicit difference scheme of 5-point was constructed by using finite volume method and finite difference method.A large sparse matrix with five diagonals was formed and was stored by three arrays of one dimension in a compressed mode.General iterative methods do not work wel1 with large sparse matrix.With algebraic multigrid method(AMG),linear algebraic system of equations was solved and the precision was set at 10-6.The computation results were compared with the experimental results.The results show that the computation results have a good agreement with the experiment data.The precision of computational results and numerical simulation efficiency are greatly improved.
文摘The research is motivated by the ongoing the electromagnetic continuous casting of molten metal. The revised k-ε model considering the effect of magnetic field application was derived. The specific model equations for the electromagnetic braking were used to calculate the velocity distribution in the continuous casting mold of steel. The results show that the revised k-ε model considering the effect of magnetic field application tends to suppress the production of turbulence and difference between the conventional and revised k-e model is small.
文摘A two-equation turbulence model has been dereloped for predicting two-phase flow the two equations describe the conserration of turbulence kinetic energy and dissipation rate of that energy for the incompressible carrier fluid in a two-phase flow The continuity, the momentum, K and εequations are modeled. In this model,the solid-liquid slip veloeites, the particle-particte interactions and the interactions between two phases are considered,The sandy water pipe turbulent flows are sueeessfuly predicted by this turbulince model.
基金the National Council of Science and Technology, Mexico CONACyT for the support provided for this research, through the Basic Science project CB-2011/ 169786
文摘In turbulence modeling, the RNG and Realizable models have important improvements in the turbulent production and dissipation terms in comparison to the Standard. The selection of the appropriate turbulence model has an impact on the convergence and solution in STRs, and they are used in mixing, multiphase modeling or as starting solution of transient models as DES and LES. Although there are several studies with the pitched blade turbine(PBT) impeller, most of them used the Standard model as representative of all k–ε models, using structured hexahedral grids composed of low number of cells, and in some cases under axial symmetry assumptions.Accordingly, in this work the assessment of the Standard, RNG and Realizable models to describe the turbulent flow field of this impeller, using the Multiple Reference Frame(MRF) and Sliding Mesh(SM) approaches with tetrahedral domains in dense grids, is presented. This kind of cell elements is especially suitable to reproduce complex geometries. Flow velocities and turbulent parameters were verified experimentally by PIV and torque measurements. The three models were capable of predicting fairly the pumping number, the power number based on torque, and velocities. Although the RNG improved the predictions of the turbulent kinetic energy and dissipation rate, the Realizable model presented better performance for both approaches. All models failed in the prediction of the total dissipation rate, and a dependence of its value on the number of cells for the MRF was found.
文摘A parameter estimation algorithm is introduced and used to determine the parameters in the standard k-epsilon two equation turbulence model (SKE). It can be found from the estimation results that although the parameter estimation method is an effective method to determine model parameters, it is. difficult to obtain a set of parameters for SKE to suit all kinds of separated flow and a modification of the turbulence model structure should be considered. So, a new nonlinear k-e two-equation model (NNKE) is put forward in this paper and the corresponding parameter estimation technique is applied to determine the model parameters. By implementing the NNKE to solve some engineering turbulent flows, it is shown that NNKE is more accurate and versatile than SKE. Thus, the success of NNKE implies that the parameter estimation technique may have a bright prospect in engineering turbulence model research.
基金Sponsored by the National Natural Science Foundation of China(Grant No.51576054)
文摘Local heat transfer and flow characteristics in a round turbulent impinging jet for Re≈23 000 is predicted numerically with the RANS approach and a k-ε-fu turbulence model. The heat transfer predictions and turbulence parameters are verified against the axis-symmetric free jet impingement measurements and compared with previous other turbulence models, and results show the k-ε-fu model has a good performance in predictions of the local wall heat transfer coefficient, and in agreement with measurements in mean velocity profiles at different radial positions as well. The numerical model is further used to examine the effect of the fully confined impingement jet on the local Nusselt number. Local Nusselt profiles in x and y-centerlines for the target plate over three separation distances are predicted. Compared with the experimental data, the numerical results are accurate in the central domain around the stagnation region and present a consistent structure distribution.
基金The project supported by the National Natural Science Foundation of China (19725208)the National Climbing project of China
文摘By modifying the Rodi assumption to take account of the influence of flow curvature, a new curvature modified algebraic stress model(CMASM) is de- veloped from the second moment closure in the generalized curvilinear coordinate system. And the explicit form of this ASM, a new curvature modified nonlinear k-ε model (CMNKE), is derived in the orthogonal curvilinear coordinate system. This new nonlinear k-ε model is further validated by a numerical simulation of a two- dimensional U-type turnaround duct flow. The results show that the CMNKE can effectively capture the main characteristic of this curvature flow and simulate the damping effect of the shear stress by a convex curvature and the enhancing effect by a concave curvature. So, this model is a rational and effective simplification to the second moment closure.