Effects of drive current rise-time and initial load density distribution on Z-pinch characteristics

A two-dimensional, three-temperature radiation magneto-hydrodynamics model is applied to the investigation of evolutional trends in x-ray radiation power, energy, peak plasma temperature and density as functions of drive current rise-time and initial load density distribution by using the typical experimental parameters of tungsten wire-array Z- pinch on the Qiangguang-I generator. The numerical results show that as the drive current rise-time is shortened, x-ray radiation peak power, energy, peak plasma density and peak ion temperature increase approximately linearly, but among them the x-ray radiation peak power increases more quickly. As the initial plasma density distribution in the radial direction becomes gradually flattened, the peak radiation power and the peak ion-temperature almost exponentially increase, while the radiation energy and the peak plasma density change only a little. The main effect of shortening drive current rise-time is to enhance compression of plasma, and the effect of flattening initial load density distribution in the radial direction is to raise the plasma temperature. Both of the approaches elevate the x-ray peak radiation power

Bone Density and Mechanical Properties in Femoral Bone of Swim Loaded Aged Mice

Effects of swirnming on bone density and mechanical properties of femur were investigated in aged male and female mice. R/1 strain of senescence accelerated mouse (SAM) at eleven months old was used. Two groups of males and two groups of females each consisting of 7 mice were used. One male and one female groups were loaded with a swim regiment of 40 min a day, 5 days a week for 6 consecutive weeks. The remaining groups were used as the controls. All mice were fed with the standard diet and water ad libitum during the experiments.The results of this study indicated that (i) the hady weight was significantly (P<0.05) lower in the swimming groups than in the control groups in boh sexes. (ii) The bone density was significantly higher (P <0.05) in the swimming groups than in the control groups in boh sexes. However, there was no sighficant difference in cortical thickness index. (iii) In the mechanical properties of bone, there were no significant differences in the level of the maximum breaking force, the ultimate stress and the deformation between the swimndng and the contro groups in beth sexes. However, the elasticity of the bone of the female hoce in the swimming group was significantly higher (P<0.05) than that of the control group.These results suggest that regimented swimming for the aged mice might suppress age-associated bone loss, and the effect of exercise in the females is greater that in the males.

Sensibility Analysis of the Brazilian Standards for Energy Efficiency Regarding the Variation of Internal Load Density in Office Buildings in Brazilian Bioclimatic Zones 1 and 7

The RTQ-C （Technical Requirements of Quality for the Energy Performance Level of Commercial Buildings） publication classified the buildings in five efficiency levels. In RTQ-C, the evaluation can be done with two methods： a prescriptive method and a simulation one. This paper aims to identify the sensibility of the prescriptive method RTQ-C regarding the variation of equipment internal load density in office buildings in bioclimatic Zones I and 7 of the Brazilian bioclimatic zoning. The research results show that the building with walls and roof configured to meet specific prerequisites for energy efficiency Levels B and C had a lower consumption than buildings that meet the prerequisites to Level A. The study also showed that buildings with high internal load density of equipment, maximum shape factor and high, with walls and roofs with higher thermal transmittance, have lower power consumption than constructions with an envelope with greater thermal resistance. The increase in internal load density causes an increase in the internal heat generated by the large amount of equipment. In buildings with higher thermal insulation （Level A）, the internal heat is maintained in the environment, causing overheating and the need for an air conditioning system.

Study on High Power MH/Ni Battery for Hybrid Electric Vehicles

Metal hydride-nickel cell is one of the best choices for hybrid electric vehicle for its high specific energy density,security,reliability and renewability.However,its poor capability under high temperature and low specific power restrict its applications.Our studies on the metal hydride-nickel cell with different loading densities show that Ni（OH） 2 with CoOOH has good oxidation and reduction properties and proton spread rate when the loading density is 0.617 kg/m2.The power density and energy density can be as high as 1 250 W/kg and 49.4 W·h/kg respectively when Ni（OH） 2 with CoOOH was used in high power battery with the nickel foam.

Integrated Approach to the Formation of Service Areas for Urban Substations of Different Voltage

UPSS （urban power supply system） is a part of the region or the state power supply system. UPSS development is closely connected with region power supply system development as a whole. The decision of questions of long-term and middle-term planning of UPSS development occurs in the conditions of incompleteness and uncertainty of the initial information. Nevertheless in these conditions the acceptance of development strategy should be based on perspective electric loads of urban TS （transformer substations）. There are difficulties with a rational placement of substations in the city with the developed infrastructure. Such problem by theoretically grounded approach to rational formation of UPSS is solved. The hierarchical structure of the organizational construction, voltage levels and load densities is considered. The mathematical and geometrical modeling of service areas for transformer substations of different voltage is fulfilled. The method of graphic placement of transformer substations in the city territory for new substations at existing structure of networks is offered. The aim of the work is to present the new uniform approach which allows finding a rational decision for new substations＇ placement in cities with developed infrastructure on the beginning design stages in conditions of the information uncertainty. The calculation program Microsoft EXCEL and the graphic program AutoCAD are used for realization of method.

Effects of the Nature of Boundaries Conditions and Their Truncation Errors on the Distribution of Minority Carriers in Silicon Solar Cell

In this work, the effects of boundaries conditions and truncation errors in the distribution of minority carriers in the semiconductor are studied. It is a one-dimensional digital study of a polycrystalline silicon solar cell under polychromatic illumination in a dynamic state. Starting from the Boltzmann equation of semiconductors, the author establishes the general equation of particle transport. Assumptions made on the latter allow it to give the equation of distribution of minority carriers in a general way in its case to be studied. This dimensioned distribution equation reveals the parameters of influences on the distribution of carriers. It obtains a partial derivative equation for the carrier distribution function. The boundary conditions are then discretized to order one and then to order two. By considering boundary conditions and the nature of the carriers, the author numerically resolves the discretized general equation by assessing the influence of the nature of the boundary conditions and truncation errors and the influence of the discretization step on the density of the charge carriers by setting certain parameters and varying others. The work ends with a conclusion and logical follow-up to this work.

Performance Optimization of Irreversible Air Heat Pumps Considering Size Effect

Considering the size of an irreversible air heat pump （AHP）, heating load density （HLD） is taken as thermodynamic opt/mization objective by using finite-time thermodynamics. Based on an irreversible AHP with infinite reservoir thermal-capacitance rate model, the expression of HLD of AHP is put forward. The HLD opti-mization processes are studied analytically and numerically, which consist of two aspects： （1） to choose pressure ratio; （2） to distribute heat-exchanger inventory. Heat reservoir temperatures, heat transfer performance of heat exchangers as well as irreversibility during compression and expansion processes are important factors influenc-ing on the performance of an irreversible AHP, which are characterized with temperature ratio, heat exchanger inventory as well as isentropic efficiencies, respectively. Those impacts of parameters on the maximum HLD are thoroughly studied. The research results show that HLD optimization can make the size of the AHP system smaller and improve the compactness of system.

Amplification characteristics in active tapered segmented cladding fiber with large mode area

A kind of tapered segmented cladding fiber(T-SCF)with large mode area(LMA)is proposed,and the mode and amplification characteristics of T-SCFs with concave,linear,and convex tapered structures are investigated based on finite-element method(FEM)and few-mode steady-state rate equation.Simulation results indicate that the concave tapered structure can introduce high loss for high-order modes(HOMs)that is advantageous to achieve single-mode operation,whereas the convex tapered structure provides large effective mode area that can help to mitigate nonlinear effects.Meanwhile,the small-to-large amplification scheme shows further advantages on stripping off HOMs,and the large-to-small amplification scheme decreases the heat load density induced by the high-power pump.Moreover,singlemode propagation performance,effective mode area,and heat load density of the T-SCF are superior to those of tapered step index fiber(T-SIF).These theoretical model and numerical results can provide instructive suggestions for designing high-power fiber lasers and amplifiers.

Atmospheric environmental capacity and urban atmospheric load in China's Mainland

Daily and annual average atmospheric environmental capacity coefficient(A-value) sequences for China's Mainland are calculated from hourly data recorded at 378 ground stations over 1975–2014. A-values at different recurrence intervals are calculated by fitting the sequences to Pearson type III distribution curves. Based on these A-values and source-sink balance(reference concentration 100 μg m^(-3)), atmospheric environmental capacities at the recurrence intervals are calculated for all of China's Mainland and each provincial administrative region. The climate average atmospheric environmental capacity reference value for the entire mainland is 2.169×10~7 t yr^(-1). An urban atmospheric load index is defined for analyses of the impact of population density on the urban atmospheric environment. Analyses suggest that this index is also useful for differentiating whether air quality changes are attributable to varying meteorological conditions or variations of artificial emission rate.Equations guiding the control of unorganized emission sources are derived for preventing air quality deterioration during urban expansion and population concentration.