Rapid Sample Product Trial Manufacture Technique for Developing Water Meter New Products

This paper advances the viewpoints and methods of the rapid sample product trial manufacture technique for developing water meter new products by CAD and simulation, computer virtual assembling and optimizing, rapid machining process and measurement etc. as the design and sample product trial manufacture process of water meter new products are long in product development period, and low in product development efficiency in the present time.

Study in the design and manufacture process of the elastic cable anchor box in steel box girder of Taizhou Bridge

Taizhou Yangtze River Highway Bridge is a large span suspension bridge with three pylons. The elastic cables are installed to connect the steel tower and the steel box girder. The constraints can increase the safety coefficient of the middle saddle, and improve the stress conditions of the middle pylon and decrease the deflection in the middle of the main girder, as well as the longitudinal displacement of the main girder caused by live loads. The anchorage boxes of the elastic cable are installed in the wind fairing outside the vertical web plate of the box girder. Two anchor boxes form a pair and are arranged parallelly. Eight anchor boxes are installed in the bridge. In this paper, the design scheme and the technical difficulties in manufacturing are briefly discussed with the precision control techniques.

Manufacturing techniques of armor strips excavated from Emperor Qin Shi Huang's mausoleum,China

The chemical compositions and microstructures of the armor strips excavated from the Emperor Qin Shi Huang's mausoleum were examined systematically by using optical microscopy and electron microscopy.It was found that the armor strips were made of pure copper.Based on the morphology of α-Cu recrystal grain and copper sulphide(Cu2S) inclusions in the armor strips,the manufacturing techniques were proposed as follows:smelting pure copper,casting a lamellar plate,forming the cast ingots into sheets through repeated cold forging combined with annealing heat treatment,and finally cutting the sheets into filaments.Furthermore,through the deformation of copper sulphide(Cu2S) inclusions in the strips,the work rate during forging was evaluated and calculated to be close to 75%.

Manufacturing Technique and Nutritive Value of Soumbara (Parkia biglobosa Seeds) and Dark Seed of Korhogo (Côte d’Ivoire)

Soumbara is produced in an artisanal way. This product has a relatively strong odor that is not appreciated by some consumers in Côte d'Ivoire. From surveys of women and consumers, the manufacturing technique and the motivations for consumption of soumbara were revealed. For the chemical composition, the average water content is 13.33 ± 1.52 g/100 g MF, the average value of the ash content is 4 ± 0 g/100 g MS. The total protein and lipid levels are 16.37 ± 0.71 g/100 g DM and 21.55 ± 0.46 g/100 g DM respectively. Total carbohydrates, starch and total sugars are respectively 44.33 ± 1.46 g/100 g DM, 39.82 ± 32 g/100 g DM and 0.08 ± 0.01 mg glucose /mL. Concerning the phytochemical composition, the total polyphenols and total flavonoids have respectively contents of 2.74 ± 0.01 mg Eq AG mL of extract, and 0.82 ± 0.01 mg Eq Quer/mL of extract. The study notes that the iron and potassium contents are the most important with respectively 344.43 ± 1.20 μg/g and 174.5 ± 2.71 mg/g. The consumption survey revealed that soumbara produced in Côte d’Ivoire is relatively more consumed (55.77%) than that produced in other countries (44.23%). This artisanal product is appreciated for its taste (50.97%) and its therapeutic character (37.5%) in the form of grain (68.27%), powder (23.08%) or paste (8.65%). These data show that soumbara is very rich in nutrients, polyphenols and flavonoids. These results justify the numerous uses of this ingredient, both in food and in traditional medicine.

APPLICATION OF SLAG HIGH PERFORMANCE CONCRETE (SHPC) IN A CAR PARKING BUILDING

Using ground granulated blast furnace slag as the active stuff of high performance concrete (HPC), the C60 SHPC was prepared. The behaviour of the C60 SHPC and its application in the Car Parking Building of Beijing Capital International Airport were described. Also, the manufacturing techniques of reducing cement consumption, lowering hydration heat, minimizing shrinkage cracks and improving durability of the C60 SHPC were discussed. (Author abstract) 3 Refs.

Morphological Engineering of Sensing Materials for Flexible Pressure Sensors and Artificial Intelligence Applications

As an indispensable branch of wearable electronics,flexible pressure sensors are gaining tremendous attention due to their extensive applications in health monitoring,human-machine interaction,artificial intelligence,the internet of things,and other fields.In recent years,highly flexible and wearable pressure sensors have been developed using various materials/structures and transduction mechanisms.Morphological engineering of sensing materials at the nanometer and micrometer scales is crucial to obtaining superior sensor performance.This review focuses on the rapid development of morphological engineering technologies for flexible pressure sensors.We discuss different architectures and morphological designs of sensing materials to achieve high performance,including high sensitivity,broad working range,stable sensing,low hysteresis,high transparency,and directional or selective sensing.Additionally,the general fabrication techniques are summarized,including self-assembly,patterning,and auxiliary synthesis methods.Furthermore,we present the emerging applications of high-performing microengineered pressure sensors in healthcare,smart homes,digital sports,security monitoring,and machine learning-enabled computational sensing platform.Finally,the potential challenges and prospects for the future developments of pressure sensors are discussed comprehensively.

Numerical Controlled Two Optical Paths CO_2 Laser Die-Cutting Technology

A CO2 laser die-cutting system, which does not need die board any more, is a new technique for manufac-turing packing box. Two optical paths, the galvanometer scanning system and the flying optical system, are used to satisfy different processing needs. The scanning system is composed of galvanometer scanning mirrors and F-θ lens. And the flying optical system is driven by two servo motors. This paper presents the software and hardware design of the laser die-cutting system, the difference between the two optical paths, as well as the relationship among the cutting speed, thickness of wrapping paper and laser power. The cutting speed and thickness of wrapping paper are linearly increased by the incremental laser power, while the cutting speed is hyperbolically decreased by the incremental thickness of wrapping paper when the laser power is constant. The amount of incision is reduced by 20% and the processing time by 40% when tested by a low power RF CO2 laser die-cutting system using the optimized program. This tech- nique is also used for the reference of other rapid laser processing systems.

Research on Cutting Trajectory of Electroplated Diamond Wire Saw

The cutting process of electroplated diamond wire saw was researched on the basis of impulse and vibration machining theories. The different contact states in the cutting process were analyzed by using the finite element method. It shows that the cutting stress is uniformly distributed along the direction of the workpiece width in the steady state. A mathematical equation of sawing trajectory was established by using the superposition principle and the cutting experiment of wire saw to calculate the cutting trajectory. The comparison of the theoretical trajectory with the calculated one indicates that the error is less than 15%. The research results provide a theoretic basis for optimization of the saw's cutting process parameters.

Advances in research on solid-state fermented feed and its utilization:The pioneer of private customization for intestinal microorganisms

With sustainable development of biotechnology,increasing attention has been placed on utilization of solid-state fermented feed(SFF).Solid-state fermented feed has been a candidate strategy to alleviate the contradiction between supply and demand of feed resources,ensure food hygiene safety,promoting energy conservation,and emission reduction.In production of SFF,a variety of organic acids,enzymes,vitamins,peptides,and other unknown growth factors are produced,which could affect performance of animals.Solid-state fermented feed produced by different fermentation techniques has great instability on different physiological stages of different animals,which hinders the application and standardized production of SFF.Herein,we summarize the current advances in the role of the characteristics of SFF prepared by different manufacturing technique and its research progress in animal experiments on growth performance,gastrointestinal ecology,and immune system,so as to provide references for further acquiring a relatively perfect set of SFF production and evaluation systems.

A scientific study on the Xing kiln of ancient China

Xing kiln was a famous kiln site in Northern China in ancient times for its white porcelain production.Xing kiln was prosperous in Sui and Tang dynasties and declined in Five dynasties.Archaeologists think that Xing kiln of Jin dynasty belonged to Ding kiln genre because of the similar decoration style.In this study,about 470 porcelain shards unearthed from Xing kiln site in Hebei province were analyzed in terms of chemical compositions,firing temperatures,whiteness and physical properties to systemically investigate the technology evolution regularity of Xing kiln from Sui dynasty to Jin dynasty for the first time from science and technology angle,which is also very important to supplement the ancient ceramic history of science and technology in China.