Mechanical behaviors of warm and ice-rich frozen soil stabilized with sulphoaluminate cement

The warm and ice-rich frozen soil is characterized by high unfrozen water content, low shear strength and large compressibility, which is unreliable to meet the stability requirements of engineering infrastructures and foundations in permafrost regions. In this study, a novel approach for stabilizing the warm and ice-rich frozen soil with sulphoaluminate cement was proposed based on chemical stabilization. The mechanical behaviors of the stabilized soil, such as strength and stress-strain relationship, were investigated through a series of triaxial compression tests conducted at -1.0℃, and the mechanism of strength variations of the stabilized soil was also explained based on scanning electron microscope test. The investigations indicated that the strength of stabilized soil to resist failure has been improved, and the linear Mohr-Coulomb criteria can accurately reflect the shear strength of stabilized soil under various applied confining pressure. The increase in both curing age and cement mixing ratio were favorable to the growth of cohesion and internal friction angle. More importantly, the strength improvement mechanism of the stabilized soil is attributed to the formation of structural skeleton and the generation of cementitious hydration products within itself. Therefore, the investigations conducted in this study provide valuable references for chemical stabilization of warm and ice-rich frozen ground, thereby providing a basis for in-situ ground improvement for reinforcing warm and ice-rich permafrost foundations by soil-cement column installation.

Intrinsic correlation between the generalized phase equilibrium condition and mechanical behaviors in hydrate-bearing sediments

The phase equilibrium and mechanical behaviors of natural gas hydrate-bearing sediment are essential for gas recovery from hydrate reservoirs.In heating closed systems,the temperature-pressure path of hydrate-bearing sediment deviates from that of pure bulk hydrate,reflecting the porous media effect in phase equilibrium.A generalized phase equilibrium equation was established for hydrate-bearing sediments,which indicates that both capillary and osmotic pressures cause the phase equilibrium curve to shift leftward on the temperature-pressure plane.In contrast to bulk hydrate,hydrate-bearing sediment always contains a certain amount of unhydrated water,which keeps phase equilibrium with the hydrate within the hydrate stability field.With changes in temperature and pressure,a portion of pore hydrate and unhydrated water may transform into each other,affecting the shear strength of hydrate-bearing sediment.A shear strength model is proposed to consider not only hydrate saturation but also the change in temperature and pressure of hydrate-bearing sediment.The model is validated by experimental data with various hydrate saturation,temperature and pressure conditions.The deformation induced by partial dissociation was studied through depressurization tests under constant effective stress.The reduction in gas pressure within the hydrate stability field indeed caused sediment deformation.The dissociation-induced deformation can be reasonably estimated as the difference in volume between hydrate-bearing and hydrate-free sediments from the compression curves.

Mechanical behaviors of coal measures and ground control technologies for China's deep coal mines-A review

This paper reviews the major achievements in terms of mechanical behaviors of coal measures,mining stress distribution characteristics and ground control in China’s deep underground coal mining.The three main aspects of this review are coal measure mechanics,mining disturbance mechanics,and rock support mechanics.Previous studies related to these three topics are reviewed,including the geo-mechanical properties of coal measures,distribution and evolution characteristics of mining-induced stresses,evolution characteristics of mining-induced structures,and principles and technologies of ground control in both deep roadways and longwall faces.A discussion is made to explain the structural and mechanical properties of coal measures in China’s deep coal mining practices,the types and dis-tribution characteristics of in situ stresses in underground coal mines,and the distribution of mining-induced stress that forms under different geological and engineering conditions.The theory of pre-tensioned rock bolting has been proved to be suitable for ground control of deep underground coal roadways.The use of combined ground control technology(e.g.ground support,rock mass modification,and destressing)has been demonstrated to be an effective measure for rock control of deep roadways.The developed hydraulic shields for 1000 m deep ultra-long working face can effectively improve the stability of surrounding rocks and mining efficiency in the longwall face.The ground control challenges in deep underground coal mines in China are discussed,and further research is recommended in terms of theory and technology for ground control in deep roadways and longwall faces.

Quasi-static and low-velocity impact mechanical behaviors of entangled porous metallic wire material under different temperatures

To improve the defense capability of military equipment under extreme conditions,impact-resistant and high-energy-consuming materials have to be developed.The damping characteristic of entangled porous metallic wire materials(EPMWM)for vibration isolation was previously investigated.In this paper,a study focusing on the impact-resistance of EPMWM with the consideration of ambient temperature is presented.The quasi-static and low-velocity impact mechanical behavior of EPMWM under different temperatures(25℃-300℃)are systematically studied.The results of the static compression test show that the damping energy dissipation of EPMWM increases with temperature while the nonlinear damping characteristics are gradually enhanced.During the impact experiments,the impact energy loss rate of EPMWM was between 65%and 85%,while the temperatures increased from 25℃to 300℃.Moreover,under the same drop impact conditions,the overall deformation of EPMWM decreases in the temperature range of 100℃-200℃.On the other hand,the impact stiffness,energy dissipation,and impact loss factor of EPMWM significantly increase with temperature.This can be attributed to an increase in temperature,which changes the thermal expansion coefficient and contact state of the internal wire helixes.Consequently,the energy dissipation mode(dry friction,air damping,and plastic deformation)of EPMWM is also altered.Therefore,the EPMWM may act as a potential candidate material for superior energy absorption applications.

Mechanical behaviors and damage constitutive model of ceramics under shock compression

One-stage light gas gun was utilized to study the dynamic mechanical properties of AD90 alumina subjected to the shock loading. Manganin gauges were adopted to obtain the stress-time histories. The velocity interferometer system for any reflector （VISAR） was used to obtain the free surface velocity profile and determine the Hugoniot elastic limit. The Hugoniot curves were fitted with the experimental data. From Hugoniot curves the compressive behaviors of AD90 alumina were found to change typically from elastic to ＂plastic＂. The dynamic mechanical behaviors for alumina under impact loadings were analyzed by using the path line principle of Lagrange analysis, including the nonlinear characteristics, the strain rate dependence, the dispersion and declination of shock wave in the material. A damage model applicable to ceramics subjected to dynamic compressive loading has been developed. The model was based on the damage micromechanics and wing crack nucleation and growth. The effects of parameters of both the micro-cracks nucleation and the initial crack size on the dynamic fracture strength were discussed. The results of the dynamic damage evolution model were compared with the experimental results and a good agreement was found.

Mechanical Behaviors and Microstructural Characteristics of TC11 Alloy during Hot Deformation

The mechanical behaviors and the microstructural characteristics of TC11 alloy with quenched martensite microstructure during hot compressive deformation were investigated. It shows that at various temperatures and strain rates, the stress strain curves firstly exhibit strain hardening, then strain softening and finally reach the steady deformation state; in the meanwhile, the initial lamellar microstructure is transformed into the equiaxed and uniform one through dynamic recrystallization. It shows that the present TC11 alloy has different Z D relationships in relatively lower temperature (RLT) range and relatively higher temperature (RHT) range, which is believed to be due to different deformation activation energies. During RHT deformation, dynamic recrystallization occurs in both α phases and β phases, but during RLT deformation, dynamic recrystallization only occurs in α phases and in the meanwhile β phases undergo a process of precipitation and growth.

Physical and dynamic mechanical behaviors of marble after heat treatment in quasi-vacuum and air-filled environments

The dynamic mechanical properties of rock specimens after thermal treatment in the air-filled environment(AE:i.e.,at the free surface)have been extensively investigated,yet they are rarely estimated in the quasi-vacuum environment(VE:i.e.,far from free surface),which is of special importance in engineering practice.Several precise laboratory tests(i.e.,split Hopkinson pressure bar test)on marble samples in both AE and VE were performed to investigate physical and dynamic mechanical behaviors of marble after heat treatment(25℃ to 900℃)in AE and VE.The tests results demonstrate that related properties of marble could be divided into three different stages by corresponding critical temperatures of 300℃ and 600℃,at which heat damage factors are 0.29(0.30)and 0.88(0.92)in VE(AE),respectively.The thermal damage developes more fully in AE than in VE.The thermal environment plays an important role,especially in Stage 3.Specifically,a conspicuous difference(greater than 20%)between AE and VE occurs in corresponding dynamic strength and the anti-deformation capacities of tested marble specimen.The influence of heat damage of rock is very important and valuable in engineering practice,particularly when the temperature is very high(greater than 600℃).

Mechanical Behaviors of ZrO_2-Al_2O_3 Ceramic Composites with Y_2O_3 as Stabilizer

The ZrO2-Al2O3 ceramic composites were prepared by appropriate techniques with commercial ZrO2 and Al2O3 powders as raw materials and Y2O3 as stabilizer. The results indicate that with the introduction of Al2O3 into the ZrO2 matrix where the quantity of additive Y2O3 is 3.5% (mole fraction), the growth of ZrO2 grains is efficiently inhibited, which helps the ZrO2 grains exist in a metastable tetragonal manner; thus higher strength and toughness are acquired. When the content of alumina is 20% (mass fraction), the bending strength and fracture toughness of the composites are 676.7 MPa and 10 MPa·m1/2 respectively, the mechanical behaviors are close to those prepared with ZrO2 and Al2O3 powders synthesized through wet chemical approach. The mechanical behaviors of the composites are well improved owing to the dispersion toughening of alumina grains and phase transformation toughening of zirconia grains.

Study on the Basic Mechanical Behaviors of High Density Polyethylene Electrofusion Welded Joints at Different Temperature

The basic mechanical behaviors of high density polyethylene electrofusion welded joint at different temperatures were studied by using differently designed specimens in this paper. The results show that the strength of weld bonding plane is higher than that of the pipe and socket materials at room temperature. In order to get the shear strength of electrofusion welded joint, the effective bond lengths were reduced by cutting artificial groove through the socket. The effective bonding length of welded joint to get the shear strength is decreased with decreasing testing temperature. The shear strength and the sensibility to sharp notch of HDPE material increased with decreasing temperature.

Mechanical Behaviors and Deformation Properties of Retaining Wall Formed by Grouting Mould-Bag Pile

The simplified mechanical model and finite element model are established on the basis of the measured results and analysis of the grouting pile deformation monitoring,surface horizontal displacement and vertical displacement monitoring,deep horizontal displacement(inclinometer)monitoring,soil pressure monitoring and seepage pressure monitoring in the lower reaches of Wuan River regulation project in Shishi,Fujian Province.The mechanical behavior and deformation performance of mould-bag pile retaining wall formed after controlled cement grouting in the silty stratum of the test section are analyzed and compared.The results show that the use of controlled cement grouting mould-bag pile technology is to strengthen the soft stratum for sealing water and reinforcement,so that it can rock into a retaining wall,which can both retain soil and seal water with excellent effect.The control of cement grouting technology not only makes the soft soil rock in the range of retaining wall of mould-bag pile,but also makes a wide range of soil around the mould-bag pile squeeze and embed to compaction;and its cohesion and internal friction angle increased,so as to achieve the purpose of reducing soil pressure and improving mechanical and deformation properties of retaining wall.

Experimental and Numerical Investigation on the Mechanical Behaviors of the Velcro^(■) and Dual-Lock Fasteners

In order to characterize the mechanical behaviors of the Velcro~? and Dual-lock fasteners, a series of tests including the butt-joint(BJ) monotonic tensile and shear, mixed tensile-shear with various loading angles, the loading rates effects, the double cantilever beam(DCB) fracture and 180° peel experiments were performed. The tensile and shear tests results showed that the mechanical behaviors of Velcro~? fastener separation are analogous to ductile materials, and those of Dual-lock fasteners are more like brittle ones. The mixed tensile-shear with various loading angles tests results demonstrated that magnitudes of the peak stresses in 30°, 45°, and 60° have no significant differences, which are lower than those in the monotonic tensile or shear tests for the two fasteners. The effects of the loading rate tests show that the peak stresses of the Velcro~? fastener manifested good performance at the loading rate of 10 to 20 mm/min in the tensile and shear conditions, and the Dual-lock did it well around the loading rates of 10 to 20 mm/min in the tensile condition. The cohesive zone model(CZM) is employed to numerical predict the DCB fracture and the 180° peel tests. The CZM predictions results are proven to commendably capture the two tests separation processes, of the tow fasteners, and the numerical results agreed well with the peeling tests data of the Dual lock fasteners. The results and discussions in this study are expected to bring more understanding to engineers and designers about the performance of Velcro~? and Dual lock fasteners.

Constitutive modeling for mechanical behaviors of geomaterials, newdesigns and techniques in geotechnical engineering

This Special Issue of the Journal of Rock Mechanics and GeotechnicalEngineering （JRMGE） contains 13 papers prepared by internationalexperts on various general topics in geomechanics, rockmechanics and geotechnical engineering. It represents a usefulmix of theoretical developments, testing and practical applications.We present in the following brief details in the papers, alphabeticallyin accordance with the last name of the first author.Barla presents a review of tunneling techniques with emphasison the full-face method combining full-face excavation and facereinforcement by means of fiber-glass elements with a yieldcontrolsupport. This method has been used successfully in difficultgeologic conditions, and for a wide spectrum of ground situations.The validation of the method with respect to the Saint Martin LaPorte access adit along the LyoneTurin Base tunnel experiencingseverely squeezing conditions during excavation is also includedin the paper. The numerical modeling with consideration of therock mass time-dependent behavior showed a satisfactory agreementwith monitoring results.

Effects of different pull-out loading rates on mechanical behaviors and acoustic emission responses of fully grouted bolts

Due to the influence of mining disturbance stress,it is of great significance to better understand the bearing characteristics of fully grouted bolts under different pull-out loading rates.For this purpose,a series of laboratory pull-out tests were conducted to comprehensively investigate the effects of different pull-out loading rates on the mechanical performance and failure characteristics of fully grouted bolts.The results show that the mechanical performance of the anchored specimen presents obvious loading rate dependence and shear enhancement characteristics.With the increase of the pull-out loading rates,the maximum pull-out load increases,the displacement and time corresponding to the maximum pull-out load decrease.The accumulated acoustic emission(AE)counts,AE energy and AE events all decrease with the increase of the pull-out loading rates.The AE peak frequency has obvious divisional distribution characteristics and the amplitude is mainly distributed between 50-80 dB.With the increase of the pull-out loading rates,the local strain of the anchoring interface increases and the failure of the anchoring interface transfers to the interior of the resin grout.The accumulated AE counts are used to evaluate the damage parameter of the anchoring interface during the whole pull-out process.The analytical results are in good agreement with the experimental results.The research results may provide guidance for the support design and performance monitoring of fully grouted bolts.

Analytical and numerical solutions for shear mechanical behaviors of structural plane

The original descriptive model of shear stress and shear displacement only reflects the stress deformation characteristics of plastic structural plane.The index model was revised and piecewise index model was built to describe the stress deformation characteristics of plastic structural plane and brittle structural plane.The relation of stress and strain to the failure mode of structural plane considering the effect of its shape was investigated,and a model which could reflect the relation between undulate angle and shear strength was built.The result indicates that structural plane presents nonlinear characteristics,specifically,the value of undulate angle,as well as corresponding shear strength,becomes larger as the normal stress decreases.

Numerical Simulation of Mechanical Behaviors of the TiNi Shape Memory Alloy Welded Joints in the Precise Pulse Resistance Butt-Welding

The hysteresis unit system was introduced to mechanical structure behavior of the TiNi SMA joint based on the structure characteristics of the martensite variants in the joints, and some functions reflecting its inner structure characteristics and micro-behavior such as density function, phase transformation function were set up from micro-points. Finally, the structure behavior relationship and corresponding mathematic model reflecting the relationship among hysteresis strain, stress and phase transformation strain were provided, which could predict the stress-strain behavior of the TiNi SMA joint to large extent.

Effect of Y_2O_3 and Dy_2O_3 on Microstructure and Mechanical Behaviors of Aluminum Nitride Ceramics

The effects of two types of additives, Y2O3 and Dy2O3, on the sintering and mechanical behaviors of AlN ceramics were investigated. The experimental results show that the sintering temperature can be decreased and the mechanical behavior can be improved by adding rare earth in AlN ceramics. The strength of AlN ceramics with Y2O3 and Dy2O3 are 326 and 320 MPa, respectively, which are 97.6% and 93.9% higher than the un-doped AlN ceramics. The fracture behavior on the fracture surfaces of rare earth oxide AlN ceramics was found to be a mixed mode of transgranular fracture and intergranular fracture. As a result, it is concluded that the improvement of bending strength of AlN ceramics with Y2O3 and Dy2O3 addition are mainly achieved by strengthening the grain boundary.

Analysis of mechanical behaviors of big pipe roof for shallow buried large-span tunnel

A series of researches on mechanical behaviors of big pipe roof for shallow large-span loess tunnel were carried out based on the Wenxiang tunnel in Zhengzhou—Xi'an Special Passenger Railway. The longitudinal deformations of the pipe roofs were monitored and the mechanical behaviors of the pipe roofs were analyzed at the test section. A new double-parameter elastic foundation beam model for pipe roof in shallow tunnels was put forward in Wenxiang tunnel. The measured values and the calculation results agreed well with each other,revealing the force-deformation law of big pipe roof in loess tunnel:At about 15 m in front of the excavating face,the pipe roof starts to bear the load;at about 15 m behind the excavating face,the force of the pipe roof tends to be stabilized;the longitudinal deformation of the whole pipe roofs is groove-shaped distribution,and the largest force of pipe roofs is at the excavating face. Simultaneously,the results also indicate that mechanical behaviors of pipe roof closely relate to the location of the excavation face,the footage of the tunnelling cycle and the mechanics parameters of pipe roof and rock. The conclusions can be reference for the design parameter optimization and the construction scheme selection of pipe roofs,and have been verified by the result of numerical analysis software FLAC3Dand deformation monitoring.

Accuracy controlling and mechanical behaviors of precursor-derived ceramic SiOC microlattices by projection micro stereolithography(PμSL)3D printing

Precursor-derived ceramic SiOC(PDC-SiOC)microlattices exhibit excellent oxidation resistance,high-temperature stability,and superior mechanical properties.However,the printing accuracy of the PDC-SiOC microlattices by 3D printing is still limited,and mechanical properties of the PDC-SiOC microlattices have not been studied systematically.Here,PDC-SiOC octet microlattices were fabricated by projection micro stereolithography(PμSL)3D printing,and photoabsorber(Sudan III)’s effect on the accuracy was systematically analyzed.The results showed that the addition of Sudan III improved the printing accuracy significantly.Then,the ceramization process of the green body was analyzed in detail.The order of the green body decreased,and most of their chemical bonds were broken during pyrolysis.After that,the PDC-SiOC microlattices with different truss diameters in the range of 52–220μm were fabricated,and their mechanical properties were investigated.The PDC-SiOC microlattices with a truss diameter of 52μm exhibited higher compression strength(31 MPa)than those with bigger truss diameters.The size effect among the PDC-SiOC microlattices was analyzed.Our work provides a deeper insight into the manufacturing of PDC-SiOC micro-scaled architectures by 3D printing and paves a path to the research of the size effect in ceramic structures.

Mechanical Behaviors of Anchorage Interfaces in Layered Rocks with Fractures under Axial Loads

Rock bolts are widely employed as an effective and efficient reinforcement method in geotechnical engineering.Sandwich composite structures formed by hard rock and weak rock are often encountered in practical projects.Furthermore,the spatial structure of the rock mass has a direct influence on the effect of the anchorage support.To investigate the impact of rock mass structure on the mechanical characteristics of anchorage interfaces,pull-out tests on reinforced specimens with different mudstone thicknesses and fracture dip angles are conducted.The experimental results indicate that the percentage of mudstone content and fracture dip angle have a significant influence on the pullout load of the samples.A weaker surrounding rock results in a lower peak load and a longer critical anchorage length,and vice versa.The results also show that 70%mudstone content can be considered a critical condition for impacting the peak load.Specifically,the percentage of mudstone content has a limited influence on the variation in the peak load when it exceeds 70%.Optical fiber deformation results show that compared to the rock mass with fracture dip angles of 0°and 60°,the rock mass with a fracture dip angle of 30°has a more uniformly distributed force at the anchorage interface.When the fracture dip angle exceeds 60°,the dip angle is no longer a key indicator of peak load.The accuracy of the experimentally obtained load-displacement curves is further verified although numerical simulation using the discrete element method.

Mesoscale Mechanical Properties and Influencing Factors of Concrete under Uniaxial Tension

Monte Carlo simulations were carried out to generate a mesoscale model of concrete with randomly packed aggregates with different shapes and sizes.The mechanical properties of concrete specimens under uniaxial tensile loads were studied using statistical results.The results indicated that the entire process of damage and failure of specimens exhibited mainly two failure types:fracture patternsⅠandⅡ.Furthermore,the influences of the aggregate content ratio,aggregate shape,aggregate size,interfacial transition zone(ITZ)strength,and porosity ratio on the concrete specimens were analyzed.The numerical simulation results showed that the elastic modulus of the concrete specimens increased approximately linearly with the aggregate volume ratio but decreased linearly with the porosity and was not affected by the ITZ strength.The tensile strength decreased with the increases in the aggregate content and porosity of the sample,but increased linearly with the ITZ strength.In addition,the aggregate shape led to a difference in the tensile strength of the concrete.