Wetting front migration model of ion-adsorption rare earth during the multi-hole unsaturated liquid injection

In the process of ion-adsorption rare earth ore leaching,the migration characteristics of the wetting front in multi-hole injection holes and the influence of wetting front intersection effect on the migration distance of wetting fronts are still unclear.Besides,wetting front migration distance and leaching time are usually required to optimize the leaching process.In this study,wetting front migration tests of ionadsorption rare earth ores during the multi-hole fluid injection(the spacing between injection holes was 10 cm,12 cm and 14 cm)and single-hole fluid injection were completed under the constant water head height.At the pre-intersection stage,the wetting front migration laws of ion-adsorption rare earth ores during the multi-hole fluid injection and single-hole fluid injection were identical.At the postintersection stage,the intersection accelerated the wetting front migration.By using the Darcy’s law,the intersection effect of wetting fronts during the multi-hole liquid injection was transformed into the water head height directly above the intersection.Finally,based on the Green-Ampt model,a wetting front migration model of ion-adsorption rare earth ores during the multi-hole unsaturated liquid injection was established.Error analysis results showed that the proposed model can accurately simulate the infiltration process under experimental conditions.The research results enrich the infiltration law and theory of ion-adsorption rare earth ores during the multi-hole liquid injection,and this study provides a scientific basis for optimizing the liquid injection well pattern parameters of ion-adsorption rare earth in situ leaching in the future.

Leaf Area Calculation Model of E.urophylla and E.grandis×E.urophylla

[Objective] The aim was to build an optimal leaf area measurement model of E. urophylla and E. grandis×E.urophylla. [Method] The correlation between leaf area and leaf＇s eigenvalue of E. urophylla and E. grandis×E.urophylla were studied. [Result] There was certain difference in leaf characteristics values between the 2 species. The leaf areas of E. urophylla and E. grandis×E.urophylla both had significant correlation with leaf length,leaf width,leaf perimeter,leaf length × leaf width,the ratio of leaf length to leaf width,shape factor,etc.,so the factors could be constructed into a regression model with leaf area. Among them,the best 2 models for leaf area calculation which were built by leaf length × leaf width of E. urophylla and E. grandis×E.urophylla both had relatively high accuracy and practical applications. [Conclusion] The research provides a simple and effective leaf area measurement method for studies on the 2 tree species.

Calculation model of edge carbon atoms in graphite particles for anode of lithium-ion batteries

Based on the hexagonal crystallite model of graphite,the electrochemical characteristics of carbon atoms on the edge and basal plane were proposed by analyzing graphite crystal structure and bonds of carbon atoms in different sites.A spherical close-packed model for graphite particle was developed.The fractions of surface carbon atoms（SCA） and edge carbon atoms（ECA） were derived in the expression of crystallographic parameters and particle size,and the effects of ECA on the initial irreversible capacity and the mechanisms of action were analyzed and verified.The results show that the atoms on the edge are more active for electrochemical reactions,such as electrolyte decomposition and tendency to form stable bond with other atoms and groups.For the practical graphite particle,corresponding modifying factors were introduced to revise the difference in calculating results.The revised expression is suitable for the calculation of the fractions of SCA and ECA for carbon materials such as graphite,disordered carbon and modified graphite.

Calculation of the Model of Coesite Inclusions and Analysis of Their Retrometamorphic Paths

The process and path of retrometamorphism of coesite have great significance to our understanding of the P-T tracks of the exhumation of ultrahigh-pressure metamorphic rocks. Most of the coesites in the eclogite from Shima, Anhui Province, the Dabie Mountains, China, are found degraded to quartz partly or wholly, with ruptures occurring in the shells, outside which include the coesite and quartz. According to the microscopic observation, the sample of coesite inclusion is composed of garnet, quartz and coesite, based on which we have built a three-shelled composite sphere model to compute the transition of coesite. Based on the crystal growth formulas and pressure conditions of the ruptures in the garnet, we have calculated the radius of the quartz sphere, which depends on temperature, and eventually drawn the different retrometamorphic paths for different retrometamorphism rates.

Calculation Model of Equivalent Strength for Induced Crack Based on Double-K Fracture Theory and Its Optimizing Setting in RCC Arch Dam

By means of fracture testing on roller-compacted concrete （RCC） three-point bending beams with two different specimen sizes, the P-CMOD complete curve for RCC was gained. Furthermore, by applying double-K fracture theory, KiniⅠC,KunⅠC, as well as the critical effective crack length and the critical crack tip opening displacement, were evaluated. Based on the double-K fracture parameters above, the calculation model of equivalent strength for induced crack was established, thus the calculation method on its initiation, stable propagation and unstable fracture was ascertained. Moreover, the finite element simulation analysis of stress field in ShaPai arch dam and the on-site observational splaying points of induced crack at different altitudes validated the reliability of the model. Finally, crack inducer′s optimal setting in RCC arch dam was studied. It improves the design level of induced crack in RCC arch dam and satisfies the necessity of engineering practice.

The Calculation Model for Operation Cost of Coal Resources Development Based on ANN

On the basis of analysis and selection of factors influencing operation cost of coal resources development, fuzzy set method and artificial neural network (ANN) were adopted to set up the classification analysis model of coal resources. The collected samples were classified by using this model. Meanwhile, the pattern recognition model for classifying of the coal resources was built according to the factors influencing operation cost. Based on the results achieved above, in the light of the theory of information diffusion, the calculation model for operation cost of coal resources development has been presented and applied in practice, showing that these models are reasonable.

Calculation model of mass action concentrations for CaO-MgO-SiO_2-Al_2O_3-Cr_2O_3 penta-slag

Two calculation models of mass action concentrations for CaO-MgO-SiO_2-Al_2O_3-Cr_2O_3 penta-slag was presented whether 3CaO·Cr_2O_3·3SiO_2 was existence or not.Equilibrium mass action concentration of each element structure was gained.And the models results were compared with experimental activity.The final results illustrated the model without 3CaO·Cr_2O_33SiO_2 was suit for reality.The model could response the element structure of slag as well.

Near ground air temperature calculation model based on heat transfer of vertical turbulent and horizontal air flow

In order to calculate the air temperature of the near surface layer in urban environment,the surface layer air was divided into several sections in the vertical direction,and some energy balance equations were developed for each air layer,in which the heat exchange due to vertical turbulence and horizontal air flow was taken into account.Then,the vertical temperature distribution of the surface layer air was obtained through the coupled calculation using the energy balance equations of underlying surfaces and building walls.Moreover,the measured air temperatures in a small area(with a horizontal scale of less than 500 m) and a large area(with a horizontal scale of more than 1 000 m) in Guangzhou in summer were used to validate the proposed model.The calculated results accord well with the measured ones,with a maximum relative error of 4.18%.It is thus concluded that the proposed model is a high-accuracy method to theoretically analyze the urban heat island and the thermal environment.

Theoretical Calculation Model of Single Rip Tearing Strength for the Nonwoven Composites

The nonwoven composites have sandwich structure, with the first and third layers being nonwovens and the middle layer of woven fabric. On the basis of tests of the single rip tearing strength and drawing out resistances of both the nonwoven composites and the woven fabric, the single rip tearing failure mechanism of the composites were analyzed. Then theoretical calculation model for the single rip tearing strength was established, which indicates that the breaking strength of warp and weft yams in the nonwoven composites, the density of warp and weft yarns and drawing out resistances are the main influencing factors. In the end, experimental verification was made, which shows that theoretical values conform to the measured values well.

THE NEW MODEL FOR CALCULATION OF STANDARD ENTROPIES OF SOLID COMPOUNDS Ⅲ CALCULATION FOR STANDARD ENTROPIES OF SOLID BINARY OXIDES

This paper establishes a new model for calculation of the standard entropies of solid binary oxides as follows: S_(29)=27.07×Φ_1+1.120×Φ_2+n_1×k×Φ, -22.19 e.u (R=0.9960) We have invesigated 103 binary oxides. and found good agreemenl between estimated and experimental entropies.

Study on Calculation Model of High Speed Machine Silicon Steel Sheet Electromagnetic Characteristics Considering Magnetic, Stress and Temperature Condition

High-speed motor has the characteristics of high frequency, high temperature, and more stress, resulting in the field distribution inside the motor being complicated. To better study the electromagnetic characteristics of silicon steel sheet for high-speed motor. In this article, a study on the calculation model of silicon sheet electromagnetic characteristics considers the effects of electromagnetic, stress, and temperature factors. The study is divided into two parts, one is to propose the calculation model of silicon steel sheet’s permeability;the other is to improve the calculation model of silicon steel sheet’s loss. Then, the magnetic field, stress field, and temperature field of a surface mount high speed permanent magnet motor(SMHSPMSM) are analyzed by finite element method(FEM), and the results under the consideration of magnetic, stress, and temperature factors are brought into the calculation model for calculation. Finally, the accuracy of the calculation model for electromagnetic characteristics of silicon steel sheet is verified by comparing the calculated results with the finite element results.

MM CALCULATIONS OF THE METAL-PROTEIN MODEL COMPLEXES Ⅰ.MOLECULAR FORCE FIELD FOR COBALT COMPEXES

Cobalt-protein complexes play an important role in biochemical processes.The structure of the model molecule,Co(H_2O)_3SO_4(phen) has been studied by molecular mechanics.The molecular force field (MM2) parameters have been developed for the particular class of the complexes.

NUMERICAL CALCULATIONS OF GASEOUS REACTING FLOWS IN A MODEL OF GAS TURBINE COMBUSTORS

This paper describes the numerical calculations of gaseous reaction flows in a model of gas turbine combustors. The profiles of hydrodynamic and thermodynamic patterns in a three-dimensional combustor model are obtained by solving the governing differential transport equations. The well-established numerical prediction algorithm SIMPLE, the modified k-ε turbulence model and k-ε-g turbulent diffusion flame model have been adopted in computations. The β function has been selected as probability density function. The effect of combustion process on flow patterns has been investigated. The calculated results have been verified by experiments. They are in remarkably good agreement.

A Prediction Model of Effective Thermal Conductivity for Metal Powder Bed in Additive Manufacturing

In current research,many researchers propose analytical expressions for calculating the packing structure of spherical particles such as DN Model,Compact Model and NLS criterion et al.However,there is still a question that has not been well explained yet.That is:What is the core factors affecting the thermal conductivity of particles?In this paper,based on the coupled discrete element-finite difference(DE-FD)method and spherical aluminum powder,the relationship between the parameters and the thermal conductivity of the powder(ETC_(p))is studied.It is found that the key factor that can described the change trend of ETC_(p) more accurately is not the materials of the powder but the average contact area between particles(a_(ave))which also have a close nonlinear relationship with the average particle size d_(50).Based on this results,the expression for calculating the ETC_(p) of the sphere metal powder is successfully reduced to only one main parameter d_(50)and an efficient calculation model is proposed which can applicate both in room and high temperature and the corresponding error is less than 20.9%in room temperature.Therefore,in this study,based on the core factors analyzation,a fast calculation model of ETC_(p) is proposed,which has a certain guiding significance in the field of thermal field simulation.

Calculating models on surface tension of RE_2O_3-Mg O-SiO_2(RE=La, Nd, Sm, Gd and Y) melts

A thermodynamic model was developed for determining the surface tension of RE2O3-MgO-SiO2(RE=La, Nd, Sm, Gd and Y) melts considering the ionic radii of the components and Butler's equation. The temperature and composition dependence of the surface tensions in molten RE2O3-MgO-SiO2 slag systems was reproduced by the present model using surface tensions and molar volumes of pure oxides, as well as the anionic and cationic radii of the melt components. The iso-surface tension lines of La2O3-MgO-SiO2 slag melt at 1873 K were calculated and the effects of slag composition on the surface tension were also investigated. The surface tensions of La2O3, Gd2O3, Nd2O3 and Y2O3 at 1873 K were evaluated as 686, 677, 664 and 541 m N/m, respectively. The surface tension of pure rare earth oxide melts linearly decreases with increasing cationic field strength, except for Y2O3 oxide, while Y2O3 has a much weaker surface tension. The evaluated results of the surface tension show good agreements with literature data, and the mean deviation of the present model is found to be 1.05% at 1873 K.

Computation and analysis Computation and analysis of the geomagnetic field model in China and its adjacent area for 2003

Based on the geomagnetic data at 135 stations and 35 observatories in China in 2003, the Taylor polynomial model and the spherical cap harmonic model in China and its adjacent area for 2003 were established. In the model calculation, the truncation order of the model and the influences of the boundary restriction on the model calculation were carefully analyzed. The results show that the geomagnetic data used are precise and reliable, and the selection of the truncation order is reasonable. The Taylor polynomial model and the spherical cap harmonic model in China and its adjacent area established in this paper are consistent very well.

Quantitative model for species distribution of hydroxy polyaluminum chloride

The species distribution of hydroxy polyaluminum chloride (PAC, Al T=0.1mol/L) solutions prepared through two different types of base injection was studied and compared quantitatively by Al Ferron timed complex colorimetric method(AFM) and 27 Al NMR spectroscopy method (ANM), and was simulated by using a quantitative calculating procedure of chemical equilibrium in MINEQL model. The results suggest that methodology of synthesis is very important for determining species distribution in the preparation of PAC solutions. In the PAC solution prepared by micro injection of base method(MIBM), there are at least five kinds of species including a kind of monomeric species Al 3+ , three kinds of polymeric species Al 2(OH) 4+ 2, Al 7(OH) 4+ 17 , Al 13 O 4(OH) (7- n )+ 24+ n ( n =0,2)and an aggregate of Al 13 or a solid phase Al(OH) 3 (aq.). Whereas in the PAC solution prepared by instantaneous injection of base method (IIBM), there are a kind of monomeric species Al 3+ , two kinds of polymeric species Al 2(OH) 4+ 2, Al 13 O 4(OH) (7- n )+ 24+ n ( n =0,2) and a solid phase Al(OH) 3(am). The change of species distribution in the PAC solution depends on preparing method, B(OH/Al) value and concentration.

Reconstruction Model of Ocean Observing Complex Virtual Instrument

With the newly proposed Global Ocean Observing Integration, ocean observing scope has been expanded from the region to the global, therefore the need of large-scale ocean observing system integration has become more and more urgent. Currently, ocean observing systems enabled ocean sensor networks are commonly developed by different organizations using specific technologies and platforms, which brings several challenges in ocean observing instrument （OOI） access and ocean observing system seamless integration. Furthermore, the development of ocean observing systems often suffers from low efficiency due to the complex prograrmning and debugging process. To solve these problems, a novel model, Complex Virtual Instrument （CVI） Model, is proposed. The model provides formal definitions on observing instrument description file, CVI description file, model calculation method, development model and interaction standard. In addition, this model establishes mathematical expressions of two model calculation operations, meanwhile builds the mapping relationship between observing instrument description file and CVI description file. The CVI based on the new model can achieve automatic access to different OOIs, seamless integration and communication for heterogeneous environments, and further implement standardized data access and management for the global unified ocean observing network. Throughout the development, integration and application of such CVI, the rationality and feasibility of the model have been evaluated. The results confirm that the proposed model can effectively implement heterogeneous system integration, improve development efficiency, make full usage of reusable components, reduce development cost, and enhance overall software system quality. We believe that our new model has great significance to promote the large-scale ocean observing system integration.

Analysis of Bridge-Bearing Capacity Detection and Evaluation Technology

A bridge project is taken as an example to analyze the application of bearing capacity detection and evaluation.This article provides a basic overview of the project,the application of bearing capacity detection technology,and the bearing capacity assessment analysis.It is hoped that this analysis can provide a scientific reference for the load-bearing capacity detection and evaluation work in bridge engineering projects,thereby achieving a scientific assessment of the overall load-bearing capacity of the bridge engineering structure.

Cast-rolling force model in solid-liquid cast-rolling bonding(SLCRB) process for fabricating bimetal clad strips

Based on twin-roll casting, a cast-rolling force model was proposed to predict the rolling force in the bimetal solid-liquid cast-rolling bonding(SLCRB) process. The solid-liquid bonding zone was assumed to be below the kiss point(KP). The deformation resistance of the liquid zone was ignored. Then, the calculation model was derived. A 2D thermal-flow coupled simulation was established to provide a basis for the parameters in the model, and then the rolling forces of the Cu/Al clad strip at different rolling speeds were calculated. Meanwhile, through measurement experiments, the accuracy of the model was verified. The influence of the rolling speed, the substrate strip thickness, and the material on the rolling force was obtained. The results indicate that the rolling force decreases with the increase of the rolling speed and increases with the increase of the thickness and thermal conductivity of the substrate strip. The rolling force is closely related to the KP height. Therefore, the formulation of reasonable process parameters to control the KP height is of great significance to the stability of cast-rolling forming.