Deformation can directly reflect the working behavior of the dam,so determining the deformation monitoring control value can effectively monitor the safety of dam operation.The traditional dam deformation monitoring c...Deformation can directly reflect the working behavior of the dam,so determining the deformation monitoring control value can effectively monitor the safety of dam operation.The traditional dam deformation monitoring control value only considers the single measuring point.In order to overcome the limitation,this paper presents a new method to determine the monitoring control value for concrete gravity dam based on the deformations of multi-measuring points.A dam’s comprehensive deformation displacement is determined by the measured values at different measuring points on the positive inverted vertical line and the corresponding weight of eachmeasuring point.The projection pursuit method(PPM)combined with the grey wolf optimization(GWO)algorithm is used to determine the weight of each measuring point according to the spatial correlation distribution characteristics of dam deformation.The peaks over threshold(POT)model based on the extreme value theory is adopted to determine the monitoring control value with the obtained dam comprehensive deformation displacement.In addition,the POTmodel is improved with the automatic threshold determinationmethod based on the 3σcriterion in probability theory and the GWO algorithm,which can avoid subjectivity and randomness in determining the threshold.The results of the engineering application show the feasibility and applicability of the proposed method.展开更多
This paper presents a multi-interface embedded server architecture for remote real-time monitoring system and distributed monitoring applications. In the scheme,an embedded microprocessor( LPC3250 from NXP) is chosen ...This paper presents a multi-interface embedded server architecture for remote real-time monitoring system and distributed monitoring applications. In the scheme,an embedded microprocessor( LPC3250 from NXP) is chosen as the CPU of the embedded server with a linux operation system( OS) environment. The embedded server provides multiple interfaces for supporting various application scenarios. The whole network is based on local area network and adopts the Browser / Server( B / S) model. The monitoring and control node is as a browser endpoint and the remote node with an embedded server is as a server endpoint. Users can easily acquire various sensors information through writing Internet protocol address of remote node on the computer browser. Compared with client / server( C / S) mode,B / S model needs less maintain and can be applicable to large user group. In addition,a simple network management protocol( SNMP) is used for management of devices in Internet protocol( IP) networks. The results of the demonstration experiment show that the proposed system gives good support to manage the network from different user terminals and allows the users to better interact with the ambient environment.展开更多
According to the characteristics of the ther-motechnical parameters such as temperature pressure and glass level for glass melting furnace, the design method for monitoring and controlling these parameters is introduc...According to the characteristics of the ther-motechnical parameters such as temperature pressure and glass level for glass melting furnace, the design method for monitoring and controlling these parameters is introduced in this paper based on MACROMAX-2 concentrated and dis-tributedcontrol system. The configuration of management information and control loop is described, and research tests were performed to check the functions of system.展开更多
The relationships and the features of integration between Enterprise ProcessMonitoring and Controlling System (EPMCS) and Enterprise Process Related Applications (EPRA) wereanalyzed. An integration architecture center...The relationships and the features of integration between Enterprise ProcessMonitoring and Controlling System (EPMCS) and Enterprise Process Related Applications (EPRA) wereanalyzed. An integration architecture centered on EPMCS was presented, in which there were fourlayers to connect from EPMCS to EPRA: EPMCS, application integration layer, transport layer andEPRA, and there were four layers used to etstablish integration: presentation layer, function layer,data layer and system layer. The frameworks to connect EPMCS and EPRA were designed, thatEnterprise-Independent Model (EIM), Enterprise-Specific Model (ESM) and meta-model to describe thesetwo models were defined. The method to integrate data based on XML was designed to exchange datafrom EPMCS to EPRA according to the mapping between EIM and ESM. The approches are suitable forintegrating EPMCS and systems in Product Data Management (PDM), project management and enterprisebusiness management.展开更多
High performance control of an interactive process such as iron and steel plant relies on ability to honor safety and operational constraints;reduce the standard deviations of variables that need to be controlled(e.g....High performance control of an interactive process such as iron and steel plant relies on ability to honor safety and operational constraints;reduce the standard deviations of variables that need to be controlled(e.g.product quantity,quality );de-bottlenecking the process;and,maximize profitability or lower cost(e.g.energy savings, improve hot metal content).These objectives may be prioritized in this order,but can vary and are very difficult to achieve optimally through conventional control.A multivariable predictive controller solution,along with its extensive inferential sensor and built-in optimizer,provides online closed loop control and optimization for many interactive metal and mining processes to lower the energy cost,increase throughput,and optimize product quality and yield. Control loop performance is also a key factor to improve iron and steel plant automation and operation result; Honeywell CPM offers vender-independent product which provides monitoring,tuning,modeling of control loop and sustainable loop performance analysis and maintenance solution towards operation stability and energy saving.展开更多
Rapid prototyping,real-time control and monitoring of various events in robots are crucial requirements for research in the fields of modular and swarm robotics.A large quantities of resources(time,man power,infrastru...Rapid prototyping,real-time control and monitoring of various events in robots are crucial requirements for research in the fields of modular and swarm robotics.A large quantities of resources(time,man power,infrastructure,etc.)are often invested in programming,interfacing the sensors,debugging the response to algorithms during prototyping and operational phases of a robot development cycle.The cost of developing an optimal infrastructure to efficiently address such control and monitoring requirements increases significantly in the presence of mobile robots.Though numerous solutions have been developed for minimizing the resources spent on hardware prototyping and algorithm validation in both static and mobile scenarios,it can be observed that researchers have either chosen methodologies that conflict with the power and infrastructure constraints of the research field or generated constrained solutions whose applications are restricted to the field itself.This paper develops a solution for addressing the challenges in controlling heterogeneous mobile robots.A platform named Quanta-a cost effective,energy efficient and high-speed wireless infrastructure is prototyped as a part of the research in the field of modular robotics.Quanta is capable of controlling and monitoring various events in/using a robot with the help of a light-weight communication protocol independent of the robot hardware architecture(s).展开更多
With the aid of the latest fiber optic sensing technology parameters in the cure process of ther- mosetting resin-matrix composite, such as temperature, viscosity,void and residual stress, can be monitored entirely an...With the aid of the latest fiber optic sensing technology parameters in the cure process of ther- mosetting resin-matrix composite, such as temperature, viscosity,void and residual stress, can be monitored entirely and efficiently.In this paper, experiment results of viscosity measurement in composite cure process in autoclave using fiber optic sensors are presented. Based on the sensed information, a computer program is utilized to control the cure process. With this technology, the cure process becomes more apparent and controllable, which will greatly improve the cured products and reduce the cost.展开更多
In this article, we propose two control charts namely, the “Multivariate Group Runs’ (MV-GR-M)” and the “Multivariate Modified Group Runs’ (MV-MGR-M)” control charts, based on the multivariate normal processes, ...In this article, we propose two control charts namely, the “Multivariate Group Runs’ (MV-GR-M)” and the “Multivariate Modified Group Runs’ (MV-MGR-M)” control charts, based on the multivariate normal processes, for monitoring the process mean vector. Methods to obtain the design parameters and operations of these control charts are discussed. Performances of the proposed charts are compared with some existing control charts. It is verified that, the proposed charts give a significant reduction in the out-of-control “Average Time to Signal” (ATS) in the zero state, as well in the steady state compared to the Hotelling’s T2 and the synthetic T2 control charts.展开更多
This paper provides a review on the development of structural monitoring in Japan, with an emphasis on the type, strategy, and utilization of monitoring systems. The review focuses on bridge and building structures us...This paper provides a review on the development of structural monitoring in Japan, with an emphasis on the type, strategy, and utilization of monitoring systems. The review focuses on bridge and building structures using vibration-based techniques. Structural monitoring systems in Japan historically started with the objective of evaluating structural responses against extreme events. In the development of structural monitoring, monitoring systems and collected data were used to verify design assumptions, update speci cations, and facilitate the ef cacy of vibration control systems. Strategies and case studies on monitoring for the design veri cation of long-span bridges and tall buildings, the performance of seismic isolation systems in building and bridges, the veri cation of structural retro t, the veri cation of structural control systems (passive, semi-active, and active), structural assessment, and damage detec- tion are described. More recently, the application of monitoring systems has been extended to facilitate ef cient operation and effective maintenance through the rationalization of risk and asset management using monitoring data. This paper also summarizes the lessons learned and feedback obtained from case studies on the structural monitoring of bridges and buildings in Japan.展开更多
The energy management system(EMS),which acts as the heart of the energy management center of a steel enterprise,is a large computer system focused on the concentrative monitor and control of the production and utiliza...The energy management system(EMS),which acts as the heart of the energy management center of a steel enterprise,is a large computer system focused on the concentrative monitor and control of the production and utilization of energy.Although Chinese steel industry was well developed in the latest decade, so far the levels of the comprehensive energy consumption per ton steel among Chinese steel enterprises are remarkably distinct,and the average value of the comprehensive energy consumption per ton steel of them has still been much higher than the value of those in developed countries.This bad situation,in the opinion of the author,partially results from the poor ability for most Chinese steel enterprises to manage the production and utilization of energy.National policies associated to energy-saving and ejection-decreasing call for steel enterprises to build the EMS;and more and more steel enterprises themselves also desire to achieve EMS projects so that they can optimize their energy production and utilization.Baosteel,the largest and most advanced steel enterprise in China,has got plenty of experience in the EMS due to its incessant practice for more than 30 years in the design,construction,application,and revampment of its EMS.In the present article,the features of an advanced EMS is described and discussed based on the design practice of the EMS of Baosteel Zhanjiang Project.An advanced EMS should be an optimized and integrated system,which possesses of the characteristic of high managing efficiency,enough openness in expansion,friendly interfaces, and simple structure.Furthermore,it could support many-sided applications,e.g.,energy related data mineing,energy network combination and co-supply,application of geographic information technology,and other technical researched on energy-saving aspects.It is known that some energy-related indexes of Baosteel have stood on a high level better than those of some worldwide famous steel enterprises.Moreover,it goes without saying that the indexes of Baosteel Zhanjiang will be better than those of present Baosteel.Therefore, one can easily expect that the new EMS of Baosteel Zhanjiang will be much more advanced,which will be more helpful to fulfil systematiclly saving of energy,to elevate the efficiency of energy utilization,to lower the comprehensive energy consumption per ton steel.展开更多
The hardware structure and software function of intelligence door monitoring control systems on Internet is expounded. The remote managing function, database function, and the realization of dialing users are introduc...The hardware structure and software function of intelligence door monitoring control systems on Internet is expounded. The remote managing function, database function, and the realization of dialing users are introduced. The reset card is installed to improve reliability. The design of the system is reasonable and reliable. Results showed that 10 percent of the line investment have been cut off.展开更多
A compact hybrid subsystem of 16channel optical demultiplexer, 2x2 switches, optical power monitors and control circuit board is developed. The subsystem is able to add or drop arbitrary optical channels and monitor t...A compact hybrid subsystem of 16channel optical demultiplexer, 2x2 switches, optical power monitors and control circuit board is developed. The subsystem is able to add or drop arbitrary optical channels and monitor the optical power level by software commands. The size of the subsystem is 170x200x30(mm).展开更多
In order to fit the different demands for the internet of things system of greenhouse environment monitoring and control,the greenhouse environment monitoring and control management system based on Google Web Toolkit(...In order to fit the different demands for the internet of things system of greenhouse environment monitoring and control,the greenhouse environment monitoring and control management system based on Google Web Toolkit(GWT)was developed.Using remote method call(RPC)AJAX as the communication method between browser and web server,the system realized the functions such as:configuration of acquisition and control parameters,the adaptive match of database between gateway and server,the adaptive diagnosis of monitoring parameters,the warning of monitoring parameters,the adaptive generation of interface,and so on.The functions of the system was tested the results shows that the WEB browser application and Android App can adaptively realize the greenhouse environment monitoring and control according to the information configuration.展开更多
文摘Deformation can directly reflect the working behavior of the dam,so determining the deformation monitoring control value can effectively monitor the safety of dam operation.The traditional dam deformation monitoring control value only considers the single measuring point.In order to overcome the limitation,this paper presents a new method to determine the monitoring control value for concrete gravity dam based on the deformations of multi-measuring points.A dam’s comprehensive deformation displacement is determined by the measured values at different measuring points on the positive inverted vertical line and the corresponding weight of eachmeasuring point.The projection pursuit method(PPM)combined with the grey wolf optimization(GWO)algorithm is used to determine the weight of each measuring point according to the spatial correlation distribution characteristics of dam deformation.The peaks over threshold(POT)model based on the extreme value theory is adopted to determine the monitoring control value with the obtained dam comprehensive deformation displacement.In addition,the POTmodel is improved with the automatic threshold determinationmethod based on the 3σcriterion in probability theory and the GWO algorithm,which can avoid subjectivity and randomness in determining the threshold.The results of the engineering application show the feasibility and applicability of the proposed method.
基金Sponsored by the National High Technology Research and Development Program(Grant No.2012AA02A604)
文摘This paper presents a multi-interface embedded server architecture for remote real-time monitoring system and distributed monitoring applications. In the scheme,an embedded microprocessor( LPC3250 from NXP) is chosen as the CPU of the embedded server with a linux operation system( OS) environment. The embedded server provides multiple interfaces for supporting various application scenarios. The whole network is based on local area network and adopts the Browser / Server( B / S) model. The monitoring and control node is as a browser endpoint and the remote node with an embedded server is as a server endpoint. Users can easily acquire various sensors information through writing Internet protocol address of remote node on the computer browser. Compared with client / server( C / S) mode,B / S model needs less maintain and can be applicable to large user group. In addition,a simple network management protocol( SNMP) is used for management of devices in Internet protocol( IP) networks. The results of the demonstration experiment show that the proposed system gives good support to manage the network from different user terminals and allows the users to better interact with the ambient environment.
文摘According to the characteristics of the ther-motechnical parameters such as temperature pressure and glass level for glass melting furnace, the design method for monitoring and controlling these parameters is introduced in this paper based on MACROMAX-2 concentrated and dis-tributedcontrol system. The configuration of management information and control loop is described, and research tests were performed to check the functions of system.
文摘The relationships and the features of integration between Enterprise ProcessMonitoring and Controlling System (EPMCS) and Enterprise Process Related Applications (EPRA) wereanalyzed. An integration architecture centered on EPMCS was presented, in which there were fourlayers to connect from EPMCS to EPRA: EPMCS, application integration layer, transport layer andEPRA, and there were four layers used to etstablish integration: presentation layer, function layer,data layer and system layer. The frameworks to connect EPMCS and EPRA were designed, thatEnterprise-Independent Model (EIM), Enterprise-Specific Model (ESM) and meta-model to describe thesetwo models were defined. The method to integrate data based on XML was designed to exchange datafrom EPMCS to EPRA according to the mapping between EIM and ESM. The approches are suitable forintegrating EPMCS and systems in Product Data Management (PDM), project management and enterprisebusiness management.
文摘High performance control of an interactive process such as iron and steel plant relies on ability to honor safety and operational constraints;reduce the standard deviations of variables that need to be controlled(e.g.product quantity,quality );de-bottlenecking the process;and,maximize profitability or lower cost(e.g.energy savings, improve hot metal content).These objectives may be prioritized in this order,but can vary and are very difficult to achieve optimally through conventional control.A multivariable predictive controller solution,along with its extensive inferential sensor and built-in optimizer,provides online closed loop control and optimization for many interactive metal and mining processes to lower the energy cost,increase throughput,and optimize product quality and yield. Control loop performance is also a key factor to improve iron and steel plant automation and operation result; Honeywell CPM offers vender-independent product which provides monitoring,tuning,modeling of control loop and sustainable loop performance analysis and maintenance solution towards operation stability and energy saving.
文摘Rapid prototyping,real-time control and monitoring of various events in robots are crucial requirements for research in the fields of modular and swarm robotics.A large quantities of resources(time,man power,infrastructure,etc.)are often invested in programming,interfacing the sensors,debugging the response to algorithms during prototyping and operational phases of a robot development cycle.The cost of developing an optimal infrastructure to efficiently address such control and monitoring requirements increases significantly in the presence of mobile robots.Though numerous solutions have been developed for minimizing the resources spent on hardware prototyping and algorithm validation in both static and mobile scenarios,it can be observed that researchers have either chosen methodologies that conflict with the power and infrastructure constraints of the research field or generated constrained solutions whose applications are restricted to the field itself.This paper develops a solution for addressing the challenges in controlling heterogeneous mobile robots.A platform named Quanta-a cost effective,energy efficient and high-speed wireless infrastructure is prototyped as a part of the research in the field of modular robotics.Quanta is capable of controlling and monitoring various events in/using a robot with the help of a light-weight communication protocol independent of the robot hardware architecture(s).
文摘With the aid of the latest fiber optic sensing technology parameters in the cure process of ther- mosetting resin-matrix composite, such as temperature, viscosity,void and residual stress, can be monitored entirely and efficiently.In this paper, experiment results of viscosity measurement in composite cure process in autoclave using fiber optic sensors are presented. Based on the sensed information, a computer program is utilized to control the cure process. With this technology, the cure process becomes more apparent and controllable, which will greatly improve the cured products and reduce the cost.
文摘In this article, we propose two control charts namely, the “Multivariate Group Runs’ (MV-GR-M)” and the “Multivariate Modified Group Runs’ (MV-MGR-M)” control charts, based on the multivariate normal processes, for monitoring the process mean vector. Methods to obtain the design parameters and operations of these control charts are discussed. Performances of the proposed charts are compared with some existing control charts. It is verified that, the proposed charts give a significant reduction in the out-of-control “Average Time to Signal” (ATS) in the zero state, as well in the steady state compared to the Hotelling’s T2 and the synthetic T2 control charts.
文摘This paper provides a review on the development of structural monitoring in Japan, with an emphasis on the type, strategy, and utilization of monitoring systems. The review focuses on bridge and building structures using vibration-based techniques. Structural monitoring systems in Japan historically started with the objective of evaluating structural responses against extreme events. In the development of structural monitoring, monitoring systems and collected data were used to verify design assumptions, update speci cations, and facilitate the ef cacy of vibration control systems. Strategies and case studies on monitoring for the design veri cation of long-span bridges and tall buildings, the performance of seismic isolation systems in building and bridges, the veri cation of structural retro t, the veri cation of structural control systems (passive, semi-active, and active), structural assessment, and damage detec- tion are described. More recently, the application of monitoring systems has been extended to facilitate ef cient operation and effective maintenance through the rationalization of risk and asset management using monitoring data. This paper also summarizes the lessons learned and feedback obtained from case studies on the structural monitoring of bridges and buildings in Japan.
基金Supported by Distributed Multilevel Environmental Automatic Monitoring Information Management SystemResearch on Automatic Monitoring Quality Management of the Water Pollution Source(2009ZX07527-002)
文摘The energy management system(EMS),which acts as the heart of the energy management center of a steel enterprise,is a large computer system focused on the concentrative monitor and control of the production and utilization of energy.Although Chinese steel industry was well developed in the latest decade, so far the levels of the comprehensive energy consumption per ton steel among Chinese steel enterprises are remarkably distinct,and the average value of the comprehensive energy consumption per ton steel of them has still been much higher than the value of those in developed countries.This bad situation,in the opinion of the author,partially results from the poor ability for most Chinese steel enterprises to manage the production and utilization of energy.National policies associated to energy-saving and ejection-decreasing call for steel enterprises to build the EMS;and more and more steel enterprises themselves also desire to achieve EMS projects so that they can optimize their energy production and utilization.Baosteel,the largest and most advanced steel enterprise in China,has got plenty of experience in the EMS due to its incessant practice for more than 30 years in the design,construction,application,and revampment of its EMS.In the present article,the features of an advanced EMS is described and discussed based on the design practice of the EMS of Baosteel Zhanjiang Project.An advanced EMS should be an optimized and integrated system,which possesses of the characteristic of high managing efficiency,enough openness in expansion,friendly interfaces, and simple structure.Furthermore,it could support many-sided applications,e.g.,energy related data mineing,energy network combination and co-supply,application of geographic information technology,and other technical researched on energy-saving aspects.It is known that some energy-related indexes of Baosteel have stood on a high level better than those of some worldwide famous steel enterprises.Moreover,it goes without saying that the indexes of Baosteel Zhanjiang will be better than those of present Baosteel.Therefore, one can easily expect that the new EMS of Baosteel Zhanjiang will be much more advanced,which will be more helpful to fulfil systematiclly saving of energy,to elevate the efficiency of energy utilization,to lower the comprehensive energy consumption per ton steel.
文摘The hardware structure and software function of intelligence door monitoring control systems on Internet is expounded. The remote managing function, database function, and the realization of dialing users are introduced. The reset card is installed to improve reliability. The design of the system is reasonable and reliable. Results showed that 10 percent of the line investment have been cut off.
文摘A compact hybrid subsystem of 16channel optical demultiplexer, 2x2 switches, optical power monitors and control circuit board is developed. The subsystem is able to add or drop arbitrary optical channels and monitor the optical power level by software commands. The size of the subsystem is 170x200x30(mm).
基金supported by the Jiangsu Province Agricultural Science and Technology Innovation Project(CX(15)1015)the Natural Science Foundation of Jiangsu Provincial Department of Education(17KJA416002)+2 种基金the China Postdoctoral Science Foundation funded project(2015M580400)the Jiangsu Province Postdoctoral Science Foundation(1501112B)the Priority Academic Program Development of Jiangsu Higher Education Institutions(2014-37).
文摘In order to fit the different demands for the internet of things system of greenhouse environment monitoring and control,the greenhouse environment monitoring and control management system based on Google Web Toolkit(GWT)was developed.Using remote method call(RPC)AJAX as the communication method between browser and web server,the system realized the functions such as:configuration of acquisition and control parameters,the adaptive match of database between gateway and server,the adaptive diagnosis of monitoring parameters,the warning of monitoring parameters,the adaptive generation of interface,and so on.The functions of the system was tested the results shows that the WEB browser application and Android App can adaptively realize the greenhouse environment monitoring and control according to the information configuration.