A new multisensor fusion SLAM approach for mobile robots

This paper presents a novel method, which enhances the use of external mechanisms by considering a multisensor system, composed of sonars and a CCD camera. Monocular vision provides redundant information about the location of the geometric entities detected by the sonar sensors. To reduce ambiguity significantly, an improved and more detailed sonar model is utilized. Moreover, Hough transform is used to extract features from raw sonar data and vision image. Information is fused at the level of features. This technique significantly improves the reliability and precision of the environment observations used for the simultaneous localization and map building problem for mobile robots. Experimental results validate the favorable performance of this approach.

Fuzzy Stochastic Approach for Multisensor Fusion

The problem of multisensor fuzzy stochastic fusion is probed in the paper. The concept of fuzzy stochastic fusion entropy is defined, the character of fusion entropy is discussed and the entropy rule of optimal decision in multisensor system is deduced first. The criterion of multisensor fuzzy stochastic data fusion is presented, and the adaptive algorithms of multisensor fuzzy random data fusuion under the criterion is set up second. The effectiveness of the decision fusion and data fusion method has been demonstrated through the computer simulation last.

Multisensor Data Fusion for High Quality Data Analysis and Processing in Measurement and Instrumentation

Multisensor data fusion （MDF） is an emerging technology to fuse data from multiple sensors in order to make a more accurate estimation of the environment through measurement and detection. Applications of MDF cross a wide spectrum in military and civilian areas. With the rapid evolution of computers and the proliferation of micro-mechanical/electrical systems sensors, the utilization of MDF is being popularized in research and applications. This paper focuses on application of MDF for high quality data analysis and processing in measurement and instrumentation. A practical, general data fusion scheme was established on the basis of feature extraction and merge of data from multiple sensors. This scheme integrates artificial neural networks for high performance pattern recognition. A number of successful applications in areas of NDI （Non-Destructive Inspection） corrosion detection, food quality and safety characterization, and precision agriculture are described and discussed in order to motivate new applications in these or other areas. This paper gives an overall picture of using the MDF method to increase the accuracy of data analysis and processing in measurement and instrumentation in different areas of applications.

Research on Kalman-filter based multisensor data fusion

Multisensor data fusion has played a significant role in diverse areas ranging from local robot guidance to global military theatre defense etc. Various multisensor data fusion methods have been extensively investigated by researchers, of which Klaman filtering is one of the most important. Kalman filtering is the best-known recursive least mean-square algorithm to optimally estimate the unknown states of a dynamic system, which has found widespread application in many areas. The scope of the work is restricted to investigate the various data fusion and track fusion techniques based on the Kalman Filter methods, then a new method of state fusion is proposed. Finally the simulation results demonstrate the effectiveness of the introduced method.

Multiscale Multisensor Data Fusion and Application in High Precision Marking and Cutting Robot System

The multisensor online measure system for high precision marking and cutting robot system is designed and the data fusion method is introduced, which combines augment state multiscale process with extend Kalman filter. The technology measuring the three-dimensional deforming information of profiled bars is applied. The experimental result shows that applying the multisensor data fusion technology can enhance the measure precision and the reliability of measure system.

A NOVEL REGION FEATURE USED IN MULTISENSOR IMAGE FUSION

A new region feature which emphasized the salience of target region and its neighbors is proposed. In region segmentation-based multisensor image fusion scheme, the presented feature can be extracted from each segmented region to determine the fusion weight. Experimental results demonstrate that the proposed feature has extensive application scope and it provides much more information for each region. It can not only be used in image fusion but also be used in other image processing applications.

Multisensor image fusion algorithm using nonseparable wavelet frame transform

A muitisensor image fusion algorithm is described using 2-dimensional nonseparable wavelet frame （NWF） transform. The source muitisensor images are first decomposed by the NWF transform. Then, the NWF transform coefficients of the source images are combined into the composite NWF transform coefficients. Inverse NWF transform is performed on the composite NWF transform coefficients in order to obtain the intermediate fused image. Finally, intensity adjustment is applied to the intermediate fused image in order to maintain the dynamic intensity range. Experiment resuits using real data show that the proposed algorithm works well in muitisensor image fusion.

Distributed multisensor data fusion based on Kalman filtering and the parallel implementation

The purpose of data fusion is to produce an improved model or estimate of a system from a set of independent data sources. Various multisensor data fusion approaches exist, in which Kalman filtering is important. In this paper, a fusion algorithm based on multisensor systems is discussed and a distributed multisensor data fusion algorithm based on Kalman filtering presented. The algorithm has been implemented on cluster-based high performance computers. Experimental results show that the method produces precise estimation in considerably reduced execution time.

THEORETICAL ANALYSIS OF IMPROVEMENT OF TRACK LOSS IN CLUTTER WITH MULTISENSOR DATA FUSION

The paper analyses the improvement of track loss in clutter with multisensor data fusion.By a determination of the transition probability density function for the fusion prediction error, one can study the mechanism of track loss analytically. With nearest-neighbor association algorithm. The paper we studies the fused tracking performance parameters, such as mean time to lose fused track and the cumulative probability of lost fused track versus the normalized clutter density, for track continuation and track initiation, respectively. A comparison of the results obtained with the case of a single sensor is presented. These results show that the fused tracks of multisensor reduce the possibility of track loss and improve the tracking performance. The analysis is of great importance for further understanding the action of data fusion.

Self-tuning Information Fusion Kalman Predictor Weighted by Diagonal Matrices and Its Convergence Analysis

为有未知噪音统计的 multisensor 系统，使用现代时间系列分析方法，基于革新建模的动人的一般水准(麻省)的联机鉴定，并且基于为关联功能的矩阵方程的解决方案，噪音变化的评估者被获得，并且在线性最小的变化下面由斜矩阵加权的最佳的信息熔化标准，一个自我调节的信息熔化 Kalman 预言者被介绍，它认识到自我调节的 dec 基于动态错误系统，一个新集中分析方法为自我调节的 fuser 被介绍。在一条认识的集中的一个新概念被介绍，它是比有概率一的集中弱的。如果 MA 革新模型的参数评价是一致的，那么，自我调节的熔化 Kalman 预言者将在一条认识收敛到最佳的熔化 Kalman 预言者，这严格地被证明，或与概率一，以便它有 asymptotic optimality。它能减少计算负担，并且对实时应用合适。为追踪系统的一个目标的一个模拟例子显示出它的有效性。

Self-tuning weighted measurement fusion Kalman filter and its convergence

For multisensor systems,when the model parameters and the noise variances are unknown,the consistent fused estimators of the model parameters and noise variances are obtained,based on the system identification algorithm,correlation method and least squares fusion criterion.Substituting these consistent estimators into the optimal weighted measurement fusion Kalman filter,a self-tuning weighted measurement fusion Kalman filter is presented.Using the dynamic error system analysis （DESA） method,the convergence of the self-tuning weighted measurement fusion Kalman filter is proved,i.e.,the self-tuning Kalman filter converges to the corresponding optimal Kalman filter in a realization.Therefore,the self-tuning weighted measurement fusion Kalman filter has asymptotic global optimality.One simulation example for a 4-sensor target tracking system verifies its effectiveness.

Distributed Reduced-order Optimal Fusion Kalman Filters for Stochastic Singular Systems

Based on the optimal fusion algorithm weighted by matrices in the linear minimum variance (LMV) sense, a distributed full-order optimal fusion Kalman filter (DFFKF) is given for discrete-time stochastic singular systems with multiple sensors, which involves the inverse of a high-dimension matrix to compute matrix weights. To reduce the computational burden, a distributed reduced-order fusion Kalman filter (DRFKF) is presented, which involves in parallel the inverses of two relatively low-dimension matrices to compute matrix weights. A simulation example shows the effectiveness.

Self-tuning measurement fusion white noise deconvolution estimator with correlated noises

For the multisensor linear discrete time-invariant stochastic systems with correlated noises and unknown noise statistics,an on-line noise statistics estimator is presented by using the correlation method.Substituting it into the steady-state Riccati equation,the self-tuning Riccati equation is obtained.Using the Kalman filtering method,based on the self-tuning Riccati equation,a self-tuning weighted measurement fusion white noise deconvolution estimator is presented.By the dynamic error system analysis（DESA） method,it is proved that the self-tuning fusion white noise deconvolution estimator converges to the optimal fusion steadystate white noise deconvolution estimator in a realization,so that it has the asymptotic global optimality.A simulation example for Bernoulli-Gaussian input white noise shows its effectiveness.

A new information fusion white noise deconvolution estimator

The white noise deconvolution or input white noise estimation problem has important applications in oil seismic exploration, communication and signal processing. By the modern time series analysis method, based on the autoregressive moving average （ARMA） innovation model, a new information fusion white noise deconvolution estimator is presented for the general multisensor systems with different local dynamic models and correlated noises. It can handle the input white noise fused filtering, prediction and smoothing problems, and it is applicable to systems with colored measurement noises. It is locally optimal, and is globally suboptimal. The accuracy of the fuser is higher than that of each local white noise estimator. In order to compute the optimal weights, the formula computing the local estimation error cross-covariances is given. A Monte Carlo simulation example for the system with Bernoulli-Gaussian input white noise shows the effectiveness and performances.

INFORMATION FUSION STEADY-STATE WHITE NOISE DECONVOLUTION ESTIMATORS WITH TIME-DELAYED MEASUREMENTS AND COLORED MEASUREMENT NOISES

White noise deconvolution or input white noise estimation problem has important appli-cation backgrounds in oil seismic exploration,communication and signal processing.By the modern time series analysis method,based on the Auto-Regressive Moving Average(ARMA) innovation model,under the linear minimum variance optimal fusion rules,three optimal weighted fusion white noise deconvolution estimators are presented for the multisensor systems with time-delayed measurements and colored measurement noises.They can handle the input white noise fused filtering,prediction and smoothing problems.The accuracy of the fusers is higher than that of each local white noise estimator.In order to compute the optimal weights,the formula of computing the local estimation error cross-covariances is given.A Monte Carlo simulation example for the system with 3 sensors and the Bernoulli-Gaussian input white noise shows their effectiveness and performances.

Research in Control Systems, Sensor Fusion, and Haptic Interfaces

Research in control systems, sensor fusion and haptic interfaces is reviewed.

SELF-TUNING MEASUREMENT FUSION KALMAN FILTER WITH CORRELATED MEASUREMENT NOISES

For the multisensor system with correlated measurement noises and unknown noise statistics, based on the solution of the matrix equations for correlation function, the on-line estimators of the noise variances and cross-covariances is obtained. Further, a self-tuning weighted measurement fusion Kalman filter is presented, based on the Riccati equation. By the Dynamic Error System Analysis (DESA) method, it rigorously proved that the presented self-tuning weighted measurement fusion Kalman filter converges to the optimal weighted measurement fusion steady-state Kalman filter in a realization or with probability one, so that it has asymptotic global optimality. A simulation example for a target tracking system with 3-sensor shows that the presented self-tuning measurement fusion Kalman fuser converges to the optimal steady-state measurement fusion Kalman fuser.

Relationship Between Track Fusion Solutions with and without Feedback Information

In distributed multisensor data fusion systems, there are two types of track fusion approaches. One is sensor track fusion with feedback information, the other is without feedback information. This paper proves that the solutions of sensor track fusion with and without feedback information are both optimal and equal.

DISTRIBUTED CFAR SIGNAL DETECTION BASED ON AREA FUSION

The multisensor detection area partitioning is considered. An approach is presented to the fusion in each detection area where the sensor uses different thresholds and then at system level. The expressions of the detection probability and false alarm probability are given. An application of the method is illustrated to distributed CFAR detection systems. The result shows that the system detection probability may be improved by setting different thresholds for a detector.

MULTISENSOR TRACKING SYSTEM WITH ATTITUDE MEASUREMENTS

A new 3 D fusion tracking system for an anti air missile homing system based on radar and imaging sensor is developed. The attitude measurements from the imaging sensor are used to improve the tracking performance. Computer simulation results show that the tracking system greatly reduces the tracking errors compared with trackers without attitude measurements, and achieves small miss distances even when the target has a big maneuver.