Characterization of Flame Retardancy and Oil-Water Separation Capacity of Superhydrophobic Silylated Melamine Sponges

A silylated melamine sponge(SMS)was prepared by two simple steps,namely,immersion and dehydration of a melamine sponge coated with methyltrichlorosilane.The silylated structure of SMS was characterized by FT-IR(Fourier-transform infrared)spectroscopy,SEM(Scanning electron microscopy)and in terms of water contact angles.Its oil-water absorption and separation capacities were measured by FT-IR and UV-visible spectrophoto-metry.The experimental results have shown that oligomeric silanol covalently bonds by Si-N onto the surface of melamine sponge skeletons.SMS has shown superhydrophobicity with a water contact angle exceeding 150°±1°,a better separation efficiency with regard to diesel oil(by 99.31%(wt/wt%)in oil-water mixture and even up to 99.99%(wt/wt%)for diesel oil in its saturated aqueous solution.Moreover,SMS inherited the intrinsicflame retardancy of the melamine sponge.In general,SMS has shown superhydrophobicity,high porosity,excellent selectivity,remarkable recyclability,and better absorption capacity for various oils and organic solvents,and a high separation efficiency for oil in saturated aqueous solutions.

Preparation of Silica Nanosphere with Vertical Pore and Its Application in Oil-water Separation

Uniform monodispersed mesoporous silica nanospheres with vertical pores were successfully synthesized using chiral amphiphilic small molecule L-16Ala5PyClO4and solvents as dual templates via solgel transcription.The morphologies and pore sizes of silicas are adjustable by changing the type and amount of solvents in the reaction systems.With the increase of the organic solvent content,the morphologies of the obtained silica changed from nanospheres with vertical pore structures to nanosheets structures.When 1 mL of benzene,cyclohexane or toluene were used as solvents,only silica nanospheres were obtained,the BET surface areas of silica nanospheres reached 600.7,669.5,and 560.8 m^(2)/g,respectively.The pore sizes were 3.51,3.54,and 3.46 nm,respectively.Significantly,these ordered silica nanospheres/poly(vinyl alcohol-co-ethylene)(PVAco-PE)nanofiber membranes have high separation efficiencies(>99%)for n-hexane/water mixtures.

Preparation of Hydrophobic Fly Ash by Surface Modification and Oil-water Separation Devices

A simple and effective superhydrophobic mesh was designed and made to separate oil-water mixture. Alkali-activated fly ash reacted with 1-bromooctadecane to prepare superhydrophobic modified fly ash (MFA) with low surface energy through Williamson ether synthesis. The MFA powder was then coated uniformly on a stainless steel mesh (SSM) along with the epoxy resin E44 and curing agent T31 to give the superhydrophobic MFA-modified stainless steel mesh (MFA-SSM). The MFA-SSM has a high static water contact angle (CA) of 150.1°and can separate various oil or organic solvent from water with>95%separation efficiency. The oil-water separation efficiency remained high after 30 runs of petroleum ether/water separation.The developed superhydrophobic stainless steel mesh is expected to have wider use in oil-water separation.

Efficient oil-water separation by novel biodegradable all cellulose composite filter paper

Industrial production and domestic discharge produce a large amount of oily wastewater, which seriously affects the stability of the ecological environment. Membrane separation technology provides another path to treating oily wastewater. And appropriate surface modification of the membrane helps to achieve high efficiency of treating oily wastewater. With green, economy and stability been more concerned.The focal research reports a completely biodegradable all cellulose composite filter paper(ACCFP) composed of Ⅰ-cellulose macrofibers and Ⅱ-cellulose matrix. It is a simple one-step impregnation method to adjust the surface microstructure of the pristine filter paper(PFP), and it does not involve with chemical reaction. The pre-wetted ACCFP consist of Ⅱ-cellulose hydrogel and Ⅰ-cellulose reinforcement in the process of oil-water separation. This layer of hydrogel is the fundamental to underwater superoleophobicity, which determines their eligibility for applications of efficient oil-water mixture or oil-in-water(oil/water) emulsion separation. The separation efficiency of oil-water mixture and oil/water emulsion exceed 95% and 99.9%, respectively. In addition, excellent mechanical properties of ACCFP in dry and wet conditions ensure its stability in service and prolong service life in applications. The focal study provides a new method for high-performance oil-water separation and it is more in line with sustainable chemistry.

Simultaneously spray-assisted assembling reversible superwetting coatings for oil-water separation

Here,superhydrophobic cuprous oxide(Cu2O)with hierarchical micro/nanosized structures was synthesized via sprayassisted layer by layer assembling.The asprepared superhydrophobic meshes with high contact angle(159.6°)and low sliding angle(1°)are covered with Cu_(2)O "coral reef"like micro/nanosized structures.Interestingly,the superhydrophobic mesh surfaces became superhydrophilic again due to the oxidization of Cu_(2)O to CuO by annealing at a higher temperature(300℃).And the superhydrophobic properties would be recovered by heating at 120℃.Furthermore,the superwetting meshes were applied to design a miniature device to separate light or heavy oil from the wateroil mixtures with excellent separation efficiency.These superwetting surfaces by simultaneously sprayassisted layer by layer assembling technique show the potential application in universal oilwater separation.

Magnetic Wood-based Superhydrophobic Aerogel for Efficient Oil-Water Separation

The fabrication of directionally driven oil-water separation materials has great significance for the removal of oil spills and organic pollutants.In this study,an oil-water separation aerogel capable of directionally adsorbing oil was designed using an anisotropic wood aerogel with a layered structure and a top-down fabrication strategy.Specifically,a magnetic wood-based superhydrophobic aerogel(methyltrimethoxysilane(MTMS)/Fe_(3)O_(4) wood aerogel)was developed through the in situ coprecipitation of Fe_(3)O_(4) nanoparticles and chemical vapor deposition.Owing to its highly porous structure,lipophilicity,hydrophobicity(water contact angle of 160°),and high compressibility,the MTMS/Fe_(3)O_(4) wood aerogel exhibits excellent oil-water separation performance and compression cycle stability.Additionally,the Fe_(3)O_(4) endows the material with excellent magnetic and photothermal conversion capabilities.These excellent properties make MTMS/Fe_(3)O_(4) wood aerogel a promising recyclable and sustainable oil-water separation material.

Electrospinning Nanofiber Membrane Reinforced PVA Composite Hydrogel with Preferable Mechanical Performance for Oil-Water Separation

Nowadays hydrogels have been attracting the massive interest in oil-water separation due to their robust hydrophilicity and fantastic underwater oiliness features.However,the weak toughness and tensile strength shortcomings of hydrogels have thus inhibited their actual applicability.For this reason,we successfully fabricated the electrospun nanofiber membrane-reinforced PVA composite hydrogels.The PVA-PAN composite hydrogel has exhibited the excellent tensile strength and friction performance,separately enhancing 174.2%of the tensile strength,and reducing 20.7%of the friction coefficient and 58.7%of wear volume relative to the neat PVA hydrogel.Furthermore,the pull-out experiments indicated that the PAN nanofiber membrane exerted a stronger interface bonding effect with PVA hydrogel.The oil-water separation evaluation test showed that the separation efficiency reached up to 97.6%for treating the SA-100 lubricating oil/water system.

NIR-responsive Collagen-based Sponge Coated with Polydimethylsiloxane/Candle Soot for Oil-Water Separation

To fabricate an oil-water separation material that is rich in source,eco-friendly,and responsive,in this study,we successfully developed a collagen-based sponge for application to oil-water separation based on a green and facile strategy.In this design,widely-available collagen(COL)was used as the substrate:it was immersed in polydimethylsiloxane(PDMS)suspension with candle soot(CS)nanoparticles,followed by hot curing.The resultant sponge(CS/PDMS-COL)possessed good hydrophobicity with a water contact angle of 148.3°under a low PDMS concentration of 2%.The results from field emission scanning electron microscope,Fourier transform infrared spectrometer,X-ray photoelectron spectrometer,and X-ray diffractometry demonstrated the successful coating of CS and PDMS on the surface of COL substrate.The CS/PDMS-COL can adsorb eight oils,with the adsorption capacity for trichloromethane reaching 95 g/g.With benzene as the target adsorbent,the separation efficiency was maintained at no less than 95%even after recycling 20 times.CS/PDMS-COL was also used to separate oil-in-water emulsion.Moreover,the sponge killed bacteria effectively due to its excellent near-infrared photothermal responsiveness.This study provides new insight into the preparation of facile oil-water separation materials based on naturally occurring biomaterials effortlessly.

Robust,fluorine-free and superhydrophobic composite melamine sponge modified with dual silanized SiO_(2) microspheres for oil-water separation

Massive oily wastewater discharged from industrial production and human daily life have been an urgent environmental and ecological challenge.Superhydrophobic materials have attracted tremendous attention due to their unique properties and potential applications in the treatment of wastewater.In this study,a novel superhydrophobic/superoleophilic composite melamine sponge modified with dual silanized SiO_(2) microspheres was fabricated simply by a two-step sol-gel method using vinyltriethoxysilane and hexadecyltrimethoxysilane as functional agent,which exhibited a water contact angle of 153.2°and a water sliding contact angle of 4.8°.Furthermore,the composite sponge showed the excellent oil adsorption performance and the compressive elasticity reaching up to 130 g·g^(-1) of dichloromethane and 33.1 kPa of compressive stress.It was worth noting that the composite sponge presented the excellent separation efficiency(up to 99.5%)in the processes of continuous oil/water separation.The robust superhydrophobic composite melamine sponge provided the possibility with the practical application for oil-water separation.

Numerical Simulation of Fluid Flow and Oil-Water Separation in Hydrocyclones

The fluid flow and oil-water separation were simulated using a Reynolds stress transport equation model of turbulence in water flow and a stochastic model of oil droplet motion,Simulation results give the axial and tangential velocity components,the pressure and turbulence intensity distribution and droplet trajectories for a hydrocyclone of F type and a hydrocyclone proposed by the present authors.The flow filed predictions are in qualitative agreement with the LDV measurements.The results show that the proposed hydrocyclone has better performance than the hydrocyclone of F type due to creating stronger centrifugal force and lower axial velocity.

Oil-water Separation Properties of Produced Fluid by Polymer Flooding

Ｏｉｌ－ｗａｔｅｒＳｅｐａｒａｔｉｏｎＰｒｏｐｅｒｔｉｅｓｏｆＰｒｏｄｕｃｅｄＦｌｕｉｄｂｙＰｏｌｙｍｅｒＦｌｏｏｄｉｎｇＬｉＪｉｅｘｕｎ；ＹｕｅＪｉｈｏｎｇａｎｄＮｉｕＷｅｉｄｏｎｇ（ＴｈｅＴｈｉｒｄＯｉｌ－ｐｒｏｄｕｃｔｉｏｎＰｌａｎｔｏｆＤａｑ...

Effect of Stirring on Oil-Water Separation in Rare Earth Mixer-Settler

Oil-water separation is critical to solvent extraction process of rare earth, which can directly affect the yield and quality of the product. The experiments measure the two-phase separation time in a beaker, mixing uniformity of two phases in the mixer and the oil phase entrainment at oil exit by the Karl Fischer method and numerical simulation for the mixersettler to study the combined effect of gravity and stirring. Experimental results show that relative to the static situation, the separation efficiency resulted from low-speed stirring is increased by 25%. The water content in the oil is a minimum at an offset distance L of 10 cm and the clearance off the tank bottom z of 10 cm is as low as 0.49%. Distribution images of oilwater separation at 2 s indicates that stirring is very conducive to the separation of the oil-water phase.

Superhydrophobic magnetic Fe_(3)O_(4) polyurethane sponges for oil-water separation and oil-spill recovery

The effective and affordable separation of oil and water,a crucial process in the safe han dling of environmental disasters such as crude oil spills and recovery of valuable resources is a highly sought-after yet challenging task.Herein,superhydrophobic PU sponge was fab ricated for the fast and cost-effective adsorptive separation of oil and different organic sol vents from water.Octadecyltrichlorosilane(OTS)-functionalized Fe_(3)O_(4)@SiO_(2)core-shell mi crospheres were dip-coated on the surface of porous materials via a dip-coating process thereby endowing them with superhydrophobicity.Owing to the hydrophobic interaction between OTS molecules and oil and increased capillary force in the micropores,the result ing superhydrophobic sponge served as a selective oil-sorbent scaffold for absorbing oil from oil-water mixtures,including oil-water suspensions and emulsions.Remarkably,after the recovery of the adsorbed oil via mechanical extrusion,these superhydrophobic materials could be reused multiple times and maintain their oil-water separation efficacy even afte 10 oil-water separation cycles.

Numerical Simulation Study of Oil-Water Emulsion Separation in an Ultrasonic Field:Effect of Coupling between Acoustic and Flow Field Parameters

In this study,the separation and coalescence of oil-in-water emulsions are explored in an ultrasonic field using the lattice Boltzmann method.By simulating the propagation of ultrasonic waves,this study focuses on examining the effects of acoustic wave frequency,the ratio of oil to water components,and the aspect ratio of the boundary on the emulsification and separation processes of oil-water mixtures.The following conclusions are drawn.①Frequency affects the speed of oil droplet separation,leading to an increase in droplet size over time.Larger droplets are found near the source,while smaller droplets are distributed throughout the wave web.②As the boundary aspect ratio increases,the emulsification efficiency of the droplets weakens,and the system takes longer to stabilize.③Emulsions with a higher component of oil can better resist acoustic waves.④At the same acoustic frequency,longer wavelength ultrasonic fields promote the formation of uniformly distributed,smaller oil droplets,which is beneficial to the storage of emulsions.These numerical simulation results offer insights for optimizing conditions for oil-in-water separation and serve as a numerical reference for the study of oil-in-water emulsion separation in ultrasonic environments.

Simple and Ultrahigh Efficient Superhydrophilic Polydopamine-coated TiO_(2) Cotton for Oil-water Separation

Oil–water mixing has brought many problems to a society, and it is of great significance to develop a simple, convenient, efficient, and durable separation material to solve the problem of oil–water mixing. In this paper, modified cottons were successfully prepared using polydopamine as the in situ mineralization site of TiO_(2) nanoparticles combined with synergistic crosslinking with KH550. A large number of hydrophilic groups endowed the cotton with superhydrophilic ability, which greatly shortened its water spreading time. The prepared modified cotton could be successfully separated from oil and water, and still had a separation efficiency of 99.999% after 50 cycles. In addition, after 24 h immersion in 1 M HCl, NaOH, and NaCl solutions and 50 abrasion experiments, the modified cotton showed excellent oil–water separation ability, and the separation efficiency was above 99.990%. Successfully provided a simple preparation method to prepare high-efficiency and clean cottons for oil–water separation.

Green Fabrication of Underwater Superoleophobic Biopolymeric Nanofibrous Membranes for Effective Oil-Water Separation

Currently,most of the materials for oil-water separation membranes are limited to fluorine-based polymers with low surface energy.However,it is not biodegradable and requires large amounts of organic and toxic solvents in the membrane manufacturing process.Therefore,interest in the development of a new eco-friendly oil-water separation membrane that does not cause secondary pollution and exhibits selective wettability characteristics in water or oil is increasing.The biopolymeric nanofibrous membranes inspired by fish skin can provide specific underwater oleophobicity,which is effective for excellent oil-water separation efficiency and prevention of secondary contamination.Fish gelatin,which is highly soluble in water and has a low gelation temperature,can be electrospun in an aqueous solution and has the same polar functional groups as the hydrophilic mucilage of fish skin.In addition,the micro/nanostructure of fish skin,which induces superoleophobicity in water,introduces a bead-on-string structure using the Rayleigh instability of electrospinning.The solubility of fish gelatin in water was removed using an eco-friendly crosslinking method using reducing sugars.Fish skin-mimicking materials successfully separated suspended oil and emulsified oil,with a maximum flux of 2086 Lm^(−2) h^(−1) and a separation efficiency of more than 99%.The proposed biopolymeric nanofibrous membranes use fish gelatin,which can be extracted from fish waste and has excellent biodegradability with excellent oil-water separation performance.In addition,polymer material processing,including membrane manufacturing and crosslinking,can be realized through eco-friendly processes.Therefore,fish skin-inspired biopolymeric membrane is expected to be a promising candidate for a sustainable and effective oil-water separation membrane in the future.

Fabrication of Bioinspired Structured Superhydrophobic and Superoleophilic Copper Mesh for Efficient Oil-water Separation

Oily water treatment has attracted the attention of many researchers. The development of effective and cheap oil/water separation materials is urgent for treating this problem. Herein, inspired by superhydrophobic typical plant leaves such as lotus, red rose and marigold, superhydrophobic and superoleophilic copper mesh was fabricated by etching and then surface modi- fication with 1-dodecanethiol （HS（CH2）IlCH3）. A rough silver layer is formed on the mesh surface after immersion. The ob- tained mesh surface exhibits superhydrophobicity and superoleophilicity and the static water contact angle was 153~ ＋ 3~. In addition, the as-prepared copper mesh shows self-cleaning character with water and chemical stability. The as-prepared copper foam can easily remove the organic solvents either on water or underwater. We demonstrate that by using the as-prepared mesh, oils can be absorbed and separated, and that high separation efficiencies of larger than 92% are retained for various oils. Thus, such superhydrophobic and superoleophilic copper mesh is a very promising material for the application ofoil spill cleanup and industrial oily wastewater treatment.

One-step Condensation/copolymerization of VTES and DVB for Self-assembly Bionic Superhydrophobic Surface Coating and Study on Oil-water Separation

Mimicry of nature drives the development of bionic materials.Bionic superhydrophobic materials are a kind of high-efficiency materials to handle oil spills and water pollution.However,the stability of surface coatings of the superhydrophobic materials remains a challenge.Herein,a new category of self-assembly bionic superhydrophobic surface coating was prepared via one-step condensation/copolymerization of vinyltriethoxysilane(VTES)and divinylbenzene(DVB),which realized the close combination of covalent bonds between organic(e.g.DVB)and inorganic matter(e.g.VTES),and avoided the swelling of polydivinylbenzene(PDVB)in the process of collection of oil from water.This organic-inorganic hybrid polymer could self-assembly deposit on the surface of sponge even other substrates.For example,P(VTES-DVB)-Si0_(2)/MS obtained by assembling P(VTES-DVB)-Si0_(2)on the surface of Melamine Sponge(MS)exhibited superhydrophobicity with a Water Contact Angle(WCA)of 157.3,the optimal adsorption capacity of 77 g g 136 g g-1 for diverse oils,and an excellent separation efficiency of 99.3%.Besides,the excellent acid and alkali resistance of P(VTES-DVB)-Si0_(2)/MS suggested the potential value in practical oil-water separation.P(VTES-DVB)-Si0_(2)showed the outstanding hydrophobic performance by using as coating on different substrates.This work provided a new idea about the stable combination of organic and inorganic matter in the surface modification.

An unusual superhydrophilic/superoleophobic sponge for oil-water separation

Development of porous materials with anti-fouling and remote controllability is highly desired for oil-water separation application yet still challenging. Herein, to address this challenge, a sponge with unusual superhydrophilicity/superoleophobicity and magnetic property was fabricated through a dip-coating process. To exploit its superhydrophilic/superoleophobic property, the obtained sponge was used as a reusable water sorbent scaffold to collect water from bulk oils without absorbing any oil. Owing to its magnetic property, the sponge was manipulated remotely by a magnet without touching it directly during the whole water collection process, which could potentially lower the cost of the water collection process. Apart from acting as a water-absorbing material, the sponge can also be used as affiliation material to separate water from oil-water mixture and oil in water emulsion selectively, when fixed into a cone funnel. This research provides a key addition to the field of oil-water separation materials.

Dodecyl Mercaptan Functionalized Copper Mesh for Water Repellence and Oil-water Separation

Reckless discharge of industrial wastewater and domestic sewage as well as frequent leakage of crude oil have caused serious environmental problems and posed severe threat to human survival.Various nature inspired superhy-drophobic surfaces have been successfully applied in oily water remediation.However,further improvements are still urgently needed for practical application in terms of facile synthesis process and long-term durability towards harsh environment.Herein,we propose a simple one-step dodecyl mercaptan functionalization method to fabricate Super-hydrophobic-Superoleophilic Copper Mesh(SSCM).The prepared SSCM possesses excellent water repellence and oil affinity,enabling it to successfully separate various oil-water mixtures with high separation efficiency(e.g.,>99%for hexadecane-water mixture).The SSCM retains high separating ability when hot water and strong corrosive aqueous solutions are used to simulate oil-water mixtures,indicating remarkable chemical durability of the dodecyl mercaptan functionalized copper mesh.Additionally,the efficiency can be well maintained during 50 cycles of separation,and the water repellence is even stable after storage in air for 120 days,demonstrating the reusability and long-term stability of the SSCM.Furthermore,the functionalized mesh also shows good mechanical robustness towards abrasion by sandpaper,and oil-water separation efficiency of>96%can be obtained after 10 cycles of abrasion.The reported one-step dodecyl mercaptan functionalization could be a simple method for increasing the water repellence of copper mesh,and thereby be a great candidate for treating large-scale oily wastewater in harsh environments.