Improving the operational stability of perovskite solar cells with cesium-doped graphene oxide interlayer

Perovskite solar cells(PSCs)have made great advances in terms of power conversion efficiency(PCE),yet their subpar stability continues to hinder their commercialization.The interface between the perovskite layer and the charge-carrier transporting layers plays a crucial role in undermining the stability of PSCs.In this work,we propose a strategy to stabilize high-performance PSCs with PCE over 23%by introducing a cesium-doped graphene oxide(GO-Cs)as an interlayer between the perovskite and hole-transporting material.The GO-Cs treated PSCs exhibit excellent operational stability with a projected T80(the time where the device PCE reduces to 80%of its initial value)of 2143 h of operation at the maximum powering point under one sun illumination.

On the notions of normality, locality, and operational stability in ADRC

Treating plant dynamics as an ideal integrator chain disturbed by the total disturbance is the hallmark of active disturbance rejection control(ADRC).To interpret its effectiveness and success,to explain why so many vastly different dynamic systems can be treated in this manner,and to answer why a detailed,accurate,and global mathematical model is unnecessary,is the target of this paper.Driven by a motivating example,the notions of normality and locality are introduced.Normality shows that,in ADRC,the plant is normalized to an integrator chain,which is called local nominal model and locally describes the plant’s frequency response in the neighborhood of the expected gain crossover frequency.Locality interprets why ADRC can design the controller only with the local information of the plant.With normality and locality,ADRC can be effective and robust,and obtain operational stability discussed by T.S.Tsien.Then viewing proportional-integral-derivative(PID)control as a low-frequency approximation of second-order linear ADRC,the above results are extended to PID control.A controller design framework is proposed to obtain the controller in three steps:(1)choose an integrator chain as the local nominal model of the plant;(2)select a controller family corresponding to the local nominal model;and(3)tune the controller to guarantee the gain crossover frequency specification.The second-order linear ADRC and the PID control are two special cases of the framework.

An Organic Small Molecule as a Solid Additive in Non-Fullerene Organic Solar Cells with Improved Efficiency and Operational Stability

The use of additive is an effective approach to optimize the active layer morphology and improve the power conversion efficiency(PCE)of organic solar cells(OSCs).However,residual solvent additives always lead to undesirably compromise the stability of OSCs.In this work,an organic small molecule BBT-Cl was designed and used as a novel solid additive to partly replace solvent additive to fabricate highperformance OSCs.The synergistic effect of the dual additives on the optical property,morphology and photovoltaic characteristics of the PM6:Y6 based non-fullerene OSCs have been systematically characterized.The introduction of BBT-Cl could effectively enhance the crystallinity of the blend and promote charge extraction and transport.Consequently,the OSCs processed by the dual additives exhibit a high PCE of 17.73%,which is obviously higher than OSCs with CN additive(16.48%).Meanwhile,BBT-Cl based dual additives treatment has also been successfully introduced into another two non-fullerene OSCs to verify its general applicability.Furthermore,20%PCE aging is significantly prolonged from 720 min to 2880 min for the devices proceeded with the dual additives.This work highlights the great potential of solid additive in the fabrication of efficient OSCs with excellent stability.

Eliminating the electric field response in a perovskite heterojunction solar cell to improve operational stability

Intrinsic and extrinsic ion migration is a very large threat to the operational stability of perovskite solar cells and is difficult to completely eliminate due to the low activation energy of ion migration and the existence of internal electric field.We propose a heterojunction route to help suppress ion migration,thus improving the operational stability of the cell from the perspective of eliminating the electric field response in the perovskite absorber.A heavily doped p-type(p^(+))thin layer semiconductor is introduced between the electron transporting layer(ETL)and perovskite absorber.The heterojunction charge depletion and electric field are limited to the ETL and p^(+)layers,while the perovskite absorber and hole transporting layer remain neutral.The p^(+)layer has a variety of candidate materials and is tolerant of defect density and carrier mobility,which makes this heterojunction route highly feasible and promising for use in practical applications.

All-Polymer Solar Cells and Photodetectors with Improved Stability Enabled by Terpolymers Containing Antioxidant Side Chains

It is of vital importance to improve the long-term and photostability of organic photovoltaics,including organic solar cells(OSCs)and organic photodetectors(OPDs),for their ultimate industrialization.Herein,two series of terpolymers featuring with an antioxidant butylated hydroxytoluene(BHT)-terminated side chain,PTzBI-EHp-BTBHTx and N2200-BTBHTx(x=0.05,0.1,0.2),are designed and synthesized.It was found that incorporating appropriate ratio of benzothiadiazole(BT)with BHT side chains on the conjugated backbone would induce negligible effect on the molecular weight,absorption spectra and energy levels of polymers,however,which would obviously enhance the photostability of these polymers.Consequently,all-polymer solar cells(all-PSCs)and photodetectors were fabricated,and the all-PSC based on PTzBI-EHp-BTBHT0.05:N2200 realized an optimal power conversion efficiency(PCE)approaching~10%,outperforming the device based on pristine PTzBI-EHp:N2200.Impressively,the all-PSCs based on BHT-featuring terpolymers displayed alleviated PCEs degradation under continuous irradiation for 300 h due to the improved morphological and photostability of active layers.The OPDs based on BHT-featuring terpolymers achieved a lower dark current at−0.1 bias,which could be stabilized even after irradiation over 400 h.This study provides a feasible approach to develop terpolymers with antioxidant efficacy for improving the lifetime of OSCs and OPDs.

Practical operating flexibility of a bifunctional freestanding membrane for efficient anion exchange membrane water electrolysis across all current ranges

This study explores a symmetric configuration approach in anion exchange membrane(AEM)water electrolysis,focusing on overcoming adaptability challenges in dynamic conditions.Here,a rapid and mild synthesis technique for fabricating fibrous membrane-type catalyst electrodes is developed.Our method leverages the contrasting oxidation states between the sulfur-doped NiFe(OH)2 shell and the metallic Ni core,as revealed by electron energy loss spectroscopy.Theoretical evaluations confirm that the S–NiFe(OH)_(2) active sites optimize free energy for alkaline water electrolysis intermediates.This technique bypasses traditional energy-intensive processes,achieving superior bifunctional activity beyond current benchmarks.The symmetric AEM water electrolyzer demonstrates a current density of 2 A cm^(-2) at 1.78 V at 60℃ in 1 M KOH electrolyte and also sustains ampere-scale water electrolysis below 2.0 V for 140 h even in ambient conditions.These results highlight the system's operational flexibility and structural stability,marking a significant advance-ment in AEM water electrolysis technology.

Metal-Halide Perovskite Submicrometer-Thick Films for Ultra-Stable Self-Powered Direct X-Ray Detectors

Metal-halide perovskites are revolutionizing the world of X-ray detectors,due to the development of sensitive,fast,and cost-effective devices.Self-powered operation,ensuring portability and low power consumption,has also been recently demonstrated in both bulk materials and thin films.However,the signal stability and repeatability under continuous X-ray exposure has only been tested up to a few hours,often reporting degradation of the detection performance.Here it is shown that self-powered direct X-ray detectors,fabricated starting from a FAPbBr_(3)submicrometer-thick film deposition onto a mesoporous TiO_(2)scaffold,can withstand a 26-day uninterrupted X-ray exposure with negligible signal loss,demonstrating ultra-high operational stability and excellent repeatability.No structural modification is observed after irradiation with a total ionizing dose of almost 200 Gy,revealing an unexpectedly high radiation hardness for a metal-halide perovskite thin film.In addition,trap-assisted photoconductive gain enabled the device to achieve a record bulk sensitivity of 7.28 C Gy^(−1)cm^(−3)at 0 V,an unprecedented value in the field of thin-film-based photoconductors and photodiodes for“hard”X-rays.Finally,prototypal validation under the X-ray beam produced by a medical linear accelerator for cancer treatment is also introduced.

Investigation on Cutting Stability of Jacket in Decommissioning Process

Jacket cutting operation is one of the most complicated and highest risk operations in the process of decommissioning offshore piled platform, the security and stability of which must be assured. In this paper, the current research on offshore structure removal and jacket cutting is introduced, on the basis of which the types of load along with the load calculation method are determined. The main influences on the stability of a jacket in cutting are analyzed. The experiment test plan is drawn by using orthogonal testing method, and the formula of critical load during the cutting procedure is deduced by differential evolution algorithm. To verify the method and results of this paper, an offshore piled platform to be decommissioned in the South China Sea is taken for an example, and the detailed schedule for jacket cutting is made with the three-dimensional finite element model of the jacket established. The natural frequency, stress, strain and stability of the jacket during cutting process are calculated, which indicates that the results of finite element analysis agree well with that of the deduced formula. The result provides the scientific reference for guaranteeing the safety of jacket in cutting operation.

A Business Operation Stability by Improving the Speed ofRestoration on Software Application Service

Software application is still a heavy dependence for most of the business operation today.Whenever software application encounters error that causes downtime in the production environment,the root cause of the error can be either within the software application layer or any other factor outside the software application layer.To accurately identify the root cause is difficult whenever more than one log file is required for the root cause analysis activity.Due to such complexity,it leads to the entire duration on the root cause analysis activity became prolong.This will increase the total time taken on restoring the software application service back to the users.In order to identify the root cause of software application error in a more accurate manner,and shorten the duration of root cause analysis activity conducting on software application error,a Prescriptive Analytical Logic Model incorporates with Analytic Hierarchy Process(AHP)is proposed.The proposed Logic Model along with the algorithm will contribute a new knowledge in the area of log file analysis to shorten the total time spent on root cause analysis activity.

Heat diffusion optimization in high performance perovskite solar cells integrated with zeolite

Heat accumulation inside perovskite solar cells causes the decomposition of the perovskite layer and hole transport materials(HTMs)under working conditions,yielding a decrease in long-term stability.Here,we present a zeolite-assisted heat conduction strategy by introducing economic zeolite crystals(e.g.,NaX,NaY,and ZSM-5)as a cooling filter to induce heat diffusion.The fitted thermal diffusion kinetic equation from real-time infrared thermal imaging technology reveals the zeolite skeleton assisted thermal co nduction mechanism of internal lattice vibration.Additionally,the nearly twofold improved conductivity of the modified HTM film is benefited from Na^(+)hopping on the supercages of the zeolite,therefore,the best-performed device with a rapid heat diffusion and defect inhibition obtains a remarkable power conversion efficiency of 23.42%.Both of NaX modified sprio-OMeTAD and PTAA based devices exhibit excellent operational stability after heating 1000 h at 85℃under N_(2)condition.This work demonstrates the potential application of economical porous zeolite materials in improving the thermal stability of PSCs.

Hetero Nucleus Growth Stabilizing Zinc Anode for High‑Biosecurity Zinc‑Ion Batteries

Biocompatible devices are widely employed in modernized lives and medical fields in the forms of wearable and implantable devices,raising higher requirements on the battery biocompatibility,high safety,low cost,and excellent electrochemical performance,which become the evaluation criteria toward developing feasible biocompatible batteries.Herein,through conducting the battery implantation tests and leakage scene simulations on New Zealand rabbits,zinc sulfate electrolyte is proved to exhibit higher biosecurity and turns out to be one of the ideal zinc salts for biocompatible zinc-ion batteries(ZIBs).Furthermore,in order to mitigate the notorious dendrite growth and hydrogen evolution in mildly acidic electrolyte as well as improve their operating stability,Sn hetero nucleus is introduced to stabilize the zinc anode,which not only facilitates the planar zinc deposition,but also contributes to higher hydrogen evolution overpotential.Finally,a long lifetime of 1500 h for the symmetrical cell,the specific capacity of 150 mAh g^(-1)under 0.5 A g^(-1)for the Zn-MnO_(2)battery and 212 mAh g^(-1)under 5 A g^(-1)for the Zn—NH4V4O10 battery are obtained.This work may provide unique perspectives on biocompatible ZIBs toward the biosecurity of their cell components.

Up-Scalable Fabrication of SnO_(2)with Multifunctional Interface for High Performance Perovskite Solar Modules

Tin dioxide(SnO_(2))has been demonstrated as one of the promising electron transport layers for high-efficiency perovskite solar cells(PSCs).However,scalable fabrication of SnO_(2) films with uniform coverage,desirable thickness and a low defect density in perovskite solar mod-ules(PSMs)is still challenging.Here,we report preparation of high-quality large-area SnO_(2) films by chemical bath depo-sition(CBD)with the addition of KMnO_(4).The strong oxidiz-ing nature of KMnO_(4) promotes the conversion from Sn(II)to Sn(VI),leading to reduced trap defects and a higher carrier mobility of SnO_(2).In addition,K ions diffuse into the per-ovskite film resulting in larger grain sizes,passivated grain boundaries,and reduced hysteresis of PSCs.Furthermore,Mn ion doping improves both the crystallinity and the phase stability of the perovskite film.Such a multifunctional interface engineering strategy enabled us to achieve a power conversion efficiency(PCE)of 21.70% with less hysteresis for lab-scale PSCs.Using this method,we also fabricated 5×5 and 10×10 cm^(2) PSMs,which showed PCEs of 15.62% and 11.80%(active area PCEs are 17.26%and 13.72%),respectively.For the encapsulated 5×5 cm^(2) PSM,we obtained a T80 operation lifetime(the lifespan during which the solar module PCE drops to 80%of its initial value)exceeding 1000 h in ambient condition.

The design and practice of giant hydro turbine generating units of Three Gorges Project

The main technical problems that should be considered in the design of hydro-turbine generating units of Three Gorges Project (TGP) are analyzed;the key technical researches performed are summarized,and the parameters of hydro-turbine generating units are optimized through the study on key technical problems.The unit operation indicates that the performance of the hydro-turbine generating units is excellent,and the units can operate in a safe,stable and highly efficient mode for a long term.Therefore,it is verified effectively that the general technical design of units is scientific and rational.

Narrow bandgap molecular dyads incorporating Y-series acceptor backbones for efficient single-molecular organic solar cells

The performance of organic solar cells(OSCs)is mainly related to the bulk heterojunction(BHJ)microstructure of specific active layer systems,which is often in a metastable state.A promising strategy to address the abovementioned shortcomings of BHJs is to develop single-component active layer materials.Owing to the single-component small molecule materials with defined chemical structures generally exhibit poor absorption spectra,herein we first introduced narrow bandgap Y-series acceptors into the molecular skeleton of single-component materials,and designed two molecular dyads,SM-Et-1Y and SM-Et-2Y.The optical bandgaps(E_g~(opt)s)of the two dyads are 1.364 and 1.361 eV,respectively,which are much smaller than those of previously reported single-component molecules.Consequently,the SM-Et-2Y-based single-component OSCs(SCOSCs)showed a power conversion efficiency(PCE)of 5.07%,superior to SM-Et-1Y(2.53%),which is one of the highest PCEs reported for SCOSCs to date.Moreover,both SM-Et-1Y-and SM-Et-2Y-based devices exhibited excellent photo-stability,retaining over 90%of their initial performance after 250 h of continuous illumination.Our results provide a deeper understanding of the molecular backbone and a guiding principle for the rational design or selection of non-fullerene single-component materials with suitable donor/acceptor ratios.

Effect of Disturbances on the Operation Process of a Methane-Fueled Free-Piston Engine Generator

In this paper,the effect of disturbances on the operation process of a methane-fueled free-piston engine generator(FPEG)was experimentally investigated.Four disturbance sources,namely step change of external load,mixture flow rate fluctuation,random misfire of a cylinder,and elastic collision,were identified and applied to the FPEG.The results showed that the FPEG successfully achieved a steady-state operation with load.The maximum instantaneous electric power of 127 W and the average effective electric power of 38.9 W were obtained.When an external load was instantaneously disconnected,the engine frequency increased from 26.7 Hz to 31.3 Hz.The fluctuation amplitudes of induced voltage,pressure and compression ratio were 18.9%,24.7%and 52.2%respectively in the disturbance.By contrast,when the external load was instantaneously connected,the corresponding values were 42.2%,31.3%and 64.3%respectively,indicating that the instantaneous external load connection had a greater disturbance impact on the FPEG operation stability.Despite encountering the step change of external load,the FPEG can still restore stable operation and show good anti-disturbance ability.Compared with increasing mixture flow rate,reducing the mixture flow rate has a greater disturbance impact on the engine operation stability.Although random misfire of a cylinder will cause remarkable fluctuations in piston displacement and cylinder pressure,the FPEG will not stop running,but continues to work as a single-piston engine.Minor collision event may adversely affect the stability of engine operation,but will not lead to the FPEG shutdown.However,serious collision event may lead to ignition failure and shutdown accident.

Organic-semiconductor-assisted dielectric screening effect for stable and efficient perovskite solar cells

Perovskite solar cells(pero-SCs)performance is essentially limited by severe non-radiative losses and ion migration.Although numerous strategies have been proposed,challenges remain in the basic understanding of their origins.Here,we report a dielectric-screening-enhancement effect for perovskite defects by using organic semiconductors with finely tuned molecular structures from the atoms level.Our method produced various perovskite films with high dielectric constant values,reduced charge capture regions,suppressed ion migration,and it provides an efficient charge transport pathway for suppressing non-radiative recombination beyond the passivation effect.The resulting pero-SCs showed a promising power conversion efficiency(PCE)of 23.35%with a high open-circuit voltage(1.22 V);and the 1-cm^(2) pero-SCs maintained an excellent PCE(21.93%),showing feasibility for scalable fabrication.The robust operational and thermal stabilities revealed that this method paved a new way to understand the degradation mechanism of pero-SCs,promoting the efficiency,stability and scaled fabrication of the pero-SCs.

Stable and Highly Flexible Perovskite Solar Cells with Power Conversion Efficiency Approaching 20% by Elastic Grain Boundary Encapsulation

Here,we show that flexible perovskite solar cells(PSCs)with high operational stability and power conversion efficiency(PCE)approaching 20%were achieved by elastic grain boundary(GB)encapsulation.An introduction of trimethyltrivinylcyclotrisiloxane(V3D3)and solvent annealing(SA)resulted in an in situ cross-linking reaction between GBs and enlarged grain size that enabled oriented charge-transport properties to be achieved synchronously,leading to reduced sheet resistance with a high fill factor(FF)up to 82.93%in flexible PSCs.

STUDY ON THE OVERALL PRESSURE BALANCE OF A DOWNFLOW CIRCULATING FLUIDIZED BED SYSTEM

A pressure balance model for a circulating fluidized bed unit that incorporates a downer has been proposed. The model predictions were validated with the experimental data obtained from a special cold-model circulating fluidized bed. Comparison of the operation stability between a CFB downer and a CFB riser has been carried out. Only one critical gas velocity exists in the CFB-riser for a given riser solids flux, while there can be many critical gas velocities for the operation of a CFB downer. Therefore, it is possible to achieve high solids concentration in a CFB downer if appropriate operating conditions are used.

Efficient and stable inverted perovskite solar cells enabled by inhibition of self-aggregation of fullerene electron-transporting compounds

Fullerene-based electron-transporting layers(ETLs)significantly influence the defect passivation and device performance of inverted perovskite solar cells(PSCs).However,theπ-cage structures of fullerenes lead to a strong tendency to self-aggregate,which affects the long-term stability of the corresponding PSCs.Experimental results revealed that[6,6]-phenyl-C61-butyric acid methyl ester(PCBM)-based ETLs exhibit a certain degree of self-aggregation that affects the stability of the device,particularly under continuous irradiation stress.To modulate the aggregation behavior,we replaced a methyl hydrogen of PCBM with a phenyl group to yield[6,6]-phenyl-C61-butyric acid benzyl ester(PCBB).As verified through X-ray crystallography,this minor structural modification results in more non-covalent intermolecular interactions,which effectively enhanced the electron-transporting ability of the PCBB-based ETL and led to an efficiency approaching 20%.Notably,the enhanced intermolecular forces of PCBB suppressed its self-aggregation,and the corresponding device showed significantly improved stability,retaining approximately 90%of its initial efficiency after 600 h under one-sun irradiation with maximum power point tracking.These findings provide a viable approach for the design of new fullerene derivatives to tune their intermolecular interactions to suppress self-aggregation within the ETL for highperformance PSCs.