Single-photon scattering and quantum entanglement of two giant atoms with azimuthal angle differences in a waveguide system

We theoretically investigate coherent scattering of single photons and quantum entanglement of two giant atoms with azimuthal angle differences in a waveguide system.Using the real-space Hamiltonian,analytical expressions are derived for the transport spectra scattered by these two giant atoms with four azimuthal angles.Fano-like resonance can be exhibited in the scattering spectra by adjusting the azimuthal angle difference.High concurrence of the entangled state for two atoms can be implemented in a wide angle-difference range,and the entanglement of the atomic states can be switched on/off by modulating the additional azimuthal angle differences from the giant atoms.This suggests a novel handle to effectively control the single-photon scattering and quantum entanglement.

Optimization of Plasma Etching Parameters and Mask for Silica Optical Waveguides

Optical waveguides in silica-on-silicon are one of the key elements in optical communications.The processes of deep etching silica waveguides using resist and metal masks in RIE plasma are investigated.The etching responses,including etching rate and selectivity as functions of variation of parameters,are modeled with a 3D neural network.A novel resist/metal combined mask that can overcome the single-layer masks’ limitations is developed for enhancing the waveguides deep etching and low-loss optical waveguides are fabricated at last.

Temperature sensor based on polymer thin film optical waveguide

Based on attenuated total reflection （ATR） and thermo-optic effect, the polymeric thin film planar optical waveguide is used as the temperature sensor, and the factors influencing the sensitivity of the temperature sensor are comprehensively analyzed. Combined with theoretical analysis and experimental investigation, the sensitivity of the temperature sensor is related to the thicknesses of the upper cladding layer, the waveguide layer, the optical loss of the polymer material and the guided wave modes. The results show that the slope value about reflectivity and temperature, which stands for the sensitivity of the polymer thin film temperature sensor, is associated with the waveguide film thickness and the guided wave modes, and the slope value is the highest in the zero reflectance of a certain transverse electric （TE） mode. To improve the sensitivity of the temperature sensor, the sensor＇s working incident light exterior angle α should be chosen under a certain TE mode with the reflectivity to be zero. This temperature sensor is characterized by high sensitivity and simple structure and it is easily fabricated.

Femtosecond laser direct writing of flexibly configured waveguide geometries in optical crystals:fabrication and application

Optical waveguides are far more than mere connecting elements in integrated optical systems and circuits.Benefiting from their high optical confinement and miniaturized footprints,waveguide structures established based on crystalline materials,particularly,are opening exciting possibilities and opportunities in photonic chips by facilitating their on-chip integration with different functionalities and highly compact photonic circuits.Femtosecond-laser-direct writing(FsLDW),as a true three-dimensional(3D)micromachining and microfabrication technology,allows rapid prototyping of on-demand waveguide geometries inside transparent materials via localized material modification.The success of FsLDW lies not only in its unsurpassed aptitude for realizing 3D devices but also in its remarkable material-independence that enables cross-platform solutions.This review emphasizes FsLDW fabrication of waveguide structures with 3D layouts in dielectric crystals.Their functionalities as passive and active photonic devices are also demonstrated and discussed.

Cyclodextrin Polymer Films Optical Waveguide Sensor for Volatile Organic Gas Detection

A sensitive optical waveguide（OWG） sensor which can be used to detect volatile organic compounds（VOCs） was presented.The sensing device（element） was fabricated by means of the immobilization of polyvinyl pyrrolidone（PVP）-cyclodextrin（CD） composite film over a single-mode potassium ion exchanged glass OWG via spin-coating method.The sensor shows higher response to styrene gas than to other VOCs and displays a linear response to styrene gas in a range of 1―1000 μL/L.

Multifunctional flexible optical waveguide sensor: on the bioinspiration for ultrasensitive sensors development

This paper presents the development of a bioinspired multifunctional flexible optical sensor(BioMFOS)as an ultrasensitive tool for force(intensity and location)and orientation sensing.The sensor structure is bioinspired in orb webs,which are multifunctional devices for prey capturing and vibration transmission.The multifunctional feature of the structure is achieved by using transparent resins that present both mechanical and optical properties for structural integrity and strain/deflection transmission as well as the optical signal transmission properties with core/cladding configuration of a waveguide.In this case,photocurable and polydimethylsiloxane(PDMS)resins are used for the core and cladding,respectively.The optical transmission,tensile tests,and dynamic mechanical analysis are performed in the resins and show the possibility of light transmission at the visible wavelength range in conjunction with high flexibility and a dynamic range up to 150 Hz,suitable for wearable applications.The BioMFOS has small dimensions(around 2 cm)and lightweight(0.8 g),making it suitable for wearable application and clothing integration.Characterization tests are performed in the structure by means of applying forces at different locations of the structure.The results show an ultra-high sensitivity and resolution,where forces in theμN range can be detected and the location of the applied force can also be detected with a sub-millimeter spatial resolution.Then,the BioMFOS is tested on the orientation detection in 3D plane,where a correlation coefficient higher than 0.9 is obtained when compared with a gold-standard inertial measurement unit(IMU).Furthermore,the device also shows its capabilities on the movement analysis and classification in two protocols:finger position detection(with the BioMFOS positioned on the top of the hand)and trunk orientation assessment(with the sensor integrated on the clothing).In both cases,the sensor is able of classifying the movement,especially when analyzed in conjunction with preprocessing and clustering techniques.As another wearable application,the respiratory rate is successfully estimated with the BioMFOS integrated into the clothing.Thus,the proposed multifunctional device opens new avenues for novel bioinspired photonic devices and can be used in many applications of biomedical,biomechanics,and micro/nanotechnology.

Automated visual position detection and adjustment for optical waveguide chips and optical fiber arrays

The alignment coupling between optical waveguide chips and optical fiber arrays is the basis of the alignment coupling of planar optical waveguide devices, and the precise position detection with angle and spacing adjustments is one of the key steps of alignment coupling. A methodology for position detection, and angle and spacing adjustment was proposed for optical waveguide chips and optical fiber arrays based on machine vision. The experimental results show angle detection precision levels higher than 0.05°, line detection precision levels higher than 0.1 μm, and detection time less than 2 s. Therefore, the system developed herein meets the precise requirements necessary for position detection, and angle and spacing adjustments for optical waveguide chips and optical fiber arrays.

Research and Design of Ge_(0.6)Si_(0.4)/Si Strained-layer Superlattice Planar Optical Waveguide

Calculation shown that the refraction index of Ge_0.6Si_0.4/Sistrained-layer superlattice n≈3.64, when L_w=9 nm and L_b=24 nm. Analgorithm of numerical iteration for effective refraction index isemployed to obtain different effective refraction indexes atdifferent thickness (L). As a result, the thickness ofGe_0.6Si_0.4/Si strained-layer superlattice optical waveguide, L≤363nm, can be determined, which is very important for designingwaveguide devices. An optical waveguide can be made into a nanometerdevice by using Ge_0.6 Si_0.4/Si strained-layer superlattice.

Mode-field half-widths of Gaussian approximation for the fundamental mode of two kinds of optical waveguides

This paper analyzes the characteristic of matching efficiency between the fundamental mode of two kinds of optical waveguides and its Gaussian approximate field.Then, it presents a new method where the mode-field half-width of Caussian approximation for the fundamental mode should be defined according to the maximal matching efficiency method. The relationship between the mode-field half-width of the Gaussian approximate field obtained from the maximal matching efficiency and normalized frequency is studied; furthermore, two formulas of mode-field half-widths as a function of normalized frequency are proposed.

Effects of electron beam lithography process parameters on structure of silicon optical waveguide based on SOI

Electron beam lithography(EBL) is a key technology in the fabrication of nanoscale silicon optical waveguide. The influence of exposure dose, the main process parameter of EBL, on the structure profile of poly-methyl methacrylate(PMMA) after development was studied using a silicon on insulator(SOI) wafer with 220 nm top silicon as the substrate. The relationship between exposure dose and structure pattern width after development was analyzed according to the measurement results. The optimum exposure dose of 220 μC/cm^(2) was found to obtain a final structure consistent with the designed mask value through subsequent processes. At the same time, according to the image segmentation curve tracking technology, the contour extraction process of the dose test results was carried out, and the relationship among mask design value, exposure dose and two-dimensional roughness of boundary contour was analyzed, which can provide reference for the subsequent electron beam lithography of the same substrate material.

Full-vectorial analysis of optical waveguides by the finite difference method based on polynomial interpolation

Based on the polynomial interpolation, a new finite difference （FD） method in solving the full-vectorial guidedmodes for step-index optical waveguides is proposed. The discontinuities of the normal components of the electric field across abrupt dielectric interfaces are considered in the absence of the limitations of scalar and semivectorial approximation, and the present PD scheme can be applied to both uniform and non-uniform mesh grids. The modal propagation constants and field distributions for buried rectangular waveguides and optical rib waveguides are presented. The hybrid nature of the vectorial modes is demonstrated and the singular behaviours of the minor field components in the corners are observed. Moreover, solutions are in good agreement with those published early, which tests the validity of the present approach.

Optical properties of He^(+)-implanted and diamond blade-diced terbium gallium garnet crystal planar and ridge waveguides

Terbium gallium garnet(Tb_(3)Ga_(5)O_(12),TGG)crystal can be used to fabricate various magneto-optical devices due to its optimal Faraday effect.In this work,400-keV He^(+)ions with a fluence of 6.0×10^(16)ions/cm^(2)are irradiated into the TGG crystal for the planar waveguide formation.The precise diamond blade dicing with a rotation speed of 2×10^(4)rpm and a cutting velocity of 0.1 mm/s is performed on the He^(+)-implanted TGG planar waveguide for the ridge structure.The darkmode spectrum of the He^(+)-implanted TGG planar waveguide is measured by the prism-coupling method,thereby obtaining the relationship between the reflected light intensity and the effective refractive index.The refractive index profile of the planar waveguide is reconstructed by the reflectivity calculation method.The near-field light intensity distribution of the planar waveguide and the ridge waveguide are recorded by the end-face coupling method.The He^(+)-implanted and diamond blade-diced TGG crystal planar and ridge waveguides are promising candidates for integrated magneto-optical devices.

A saccharides sensor developed by symmetrical optical waveguide-based surface plasmon resonance

We proposed a new saccharides sensor developed by symmetrical optical waveguide(SOW)-based surface plasmon resonance(SPR).This unique MgF_(2)/Au/MgF_(2)/Analyte film structure results in longer suface plasmon wave(SPW)propagation lengths and depths,leading to an increment of resolution.In this paper,we managed to decorate the dielectric interface(MgF_(2) layer)by depositing a thin polydopamine film as surface adherent that provides a platform for secondary reactions with the probe molecule.3-Aminophenylboronic acid(3-PBA)is chosen to be the saccharides sense probe molecule in the present work.The aqueous huumnor of Diabetes and Cataract patient whose blood glucose level is normal are analyzed and the results dermonstrated that this sensor shows great potential in monitoring the blood siugar and can be adapted in the field of biological monitoring in the future.

Optical soliton with group delay in microring coupled-resonator optical waveguides

This paper derives the dispersion relation of microring coupled-resonator optical waveguides （CROWs） without any approximation by using the transfer matrix method. Based on the established dispersion relation of CROWs it obtains the slow group velocity and dispersion coefficient. It finds that the effect Of dispersion on optical pulses can be adjusted to balance the effect of nonlinearity by changing coupling coefficient or loss, so optical soliton with group delay can be obtained in microring CROWs. The optical soliton with group delay is of great significance for applications of microring CROWs in delay lines and optical buffers of future all-optical communication systems.

RESEARCH ON WATER QUALITY TESTS BASED ON OPTICAL WAVEGUIDE SURFACE PLASMON RESONANCE TECHNOLOGY

The water quality testing principle by surface plasmon resonance(SPR)is introduced.Using the scanning mode angular spectral testing and the CCD angular spectral testing,a kind of highresolution,wide-range,and portable optical waveguide SPR angular spectral testing system is studied,the method of improving the testing accuracy is discussed,and a long-life surface plasmon optical waveguide transducer is also proposed.Utilizing the SPR testing system,we contrastively tack some test for several sorts of solution,the results presented that significant differences of SPR peaks observed in different sorts of liquid,which indicated the effectiveness of SPR technology used in water quality testing and analysis.

FLUORINATED PHTHALAZINONE-CONTAINING COPOLYIMIDES FOR PASSIVE OPTICAL WAVEGUIDES

A series of fluorinated copolyimides containing phthalazinone moieties were prepared from 2,2-bis(3,4-dicarboxyphenyl)hexafluoropropane dianhydride(6FDA),3,3'4,4'-benzophenone-tetracarboxylic dianhydride(BPDA)and2-(4-aminophenyl)-4-[4-(4-aminophenoxyl)phenyl]-2,3-phthalazin-1-one(DHPZ-2NH_2)for making polymeric opticalwaveguides.The resulting copolymers containing 0-50 mo1% BPDA/DHPZ-2NH_2 show good solubility and are soluble insome organic polar aprotic solvents.The copolyimides also present excellent thermal stability.These polymers possess highglass transition temperature higher than 603 K and high decomposition temperature above 742 K determined by differentialscanning calorimetry and thennogravimetric analysis,respectively,under a nitrogen atmosphere.Their refractive indicescould be controlled by varying the ratio of 6FDA and BPDA in the copolymer from 0.5 to 1.0,and the in-plane refractiveindices(n_(TE))range from 1.6366 to 1.6668 and the out-of-plane refractive indices(n_(TM))from 1.6024 to 1.6280 at 632.8 nm.The polymers birefringence(0.0342-0.0388)is almost independent of the 6FDA content of copolymer,which indicated thatthe phthalazinone-containing copolyimides could be suitable to fabricate optical waveguides possessing a low polarizationdependent loss(PDL).

Optical Waveguide Property of Nd-doped Laser Materials Nd_xY_(1-x)Al_3(BO_3) _4 and Nd∶MgO∶LiNbO_3

Lanthanide has attracted much attention in the field of optical communications in recent years. Some property analyses on optical waveguide of Nd doped crystal Nd x Y 1-x A1 3(BO 3) 4 and Nd∶MgO∶LiNbO 3 are made in this paper, followed by introduction of the methods of experimentation and theoretical calculation for the planar optical waveguides. The refractive index profiles of the optical waveguides are analyzed. The above work offers useful information for study on new type materials for optical communications.

Effects of the Planar Optical Waveguide Thickness on the Transmission Attenuation

By analyzing and computing,according to the wave theory of planar optical waveguide attenuation,a new opinion is put forward.A series of transmission attenuation with waveguide film-thickness are given and it illustrates that optical transmission is not carrying out efficiently within some waveguide film-thickness.

Experimental Study on Near-IR Nonlinear Optical Waveguide Sensor for Refractive Index of Liquids

To determine the refractive index of liquids in near infrared（lR）, a method is presented by measuring the output angle of the visible Cerenkov-radiation-mode when liquids are placed as the cover on a planar lithium niobate waveguide. The system configuration and the principle of the method are analyzed and some experimental results are given out. Both the experimental result and simulation show that this method is simple, rapid and of sufficient precision.

Loss Measurements on Polymer Thin Film Optical Waveguides

A simple setup for the measurement of transmission loss in polymer thin film optical waveguides is described. A new electro-optic polymer film has been prepared. The transmission loss of the film is measured before and after corona poling. And the loss is determined to be 1.84 dB/cm and 2.14 dB/cm, respectively.