A type of combined optical fiber interferometric acoustic emission sensor is proposed. The sensor can be independent on the laser source and make light interference by matching the lengths of two arms,so it can be use...A type of combined optical fiber interferometric acoustic emission sensor is proposed. The sensor can be independent on the laser source and make light interference by matching the lengths of two arms,so it can be used to monitor the health of large structure. Theoretical analyses indicate that the system can be equivalent to the Michelson interferometer with two optical fiber loop reflectors,and its sensitivity has been remarkably increased because of the decrease of the losses of light energy. PZT is powered by DC regulator to control the operating point of the system,so the system can accurately detect feeble vibration which is generated by ultrasonic waves propagating on the surface of solid. The amplitude and the frequency of feeble vibration signal are obtained by detecting the output light intensity of interferometer and using Fourier transform technique. The results indicate that the system can be used to detect the acoustic emission signals by the frequency characteristics.展开更多
To keep even current distribution among DC/DC converters in a paralleled power system,an automatic master-slave control （AMSC） current sharing scheme is presented,which was implemented by a current share control IC....To keep even current distribution among DC/DC converters in a paralleled power system,an automatic master-slave control （AMSC） current sharing scheme is presented,which was implemented by a current share control IC. A current feedback loop for output voltage adjustment is proposed for low signal distortion. Moreover,a special startup control logic is designed to improve startup timing and to speed up the initial current sharing. It was completed in 1.5μm bipolar-CMOS-DMOS （BCD） technology with an area of 3.6mm^2 . Using it,a paralleled power system of two DC/DC converters capable of outputting 12V/3A was built. Experimental results show that the current sharing error at full load is kept within 1%.展开更多
The properties of near-field optics have always been the focus of nano-measurement technology.The 11th order effective nearfield optical signal with an incident laser wavelength of 1,550 nm is obtained using a platinu...The properties of near-field optics have always been the focus of nano-measurement technology.The 11th order effective nearfield optical signal with an incident laser wavelength of 1,550 nm is obtained using a platinum-coated optical probe(Pt–Si probe).The experimental results show that the local electric field intensity of the Pt–Si probe is nearly 30 times higher than that of silicon probe(Si probe).Therefore,the highest 7th order near-field optical imaging results are obtained with the Pt–Si probe.Further,near-field optical imaging is performed on samples such as gold grids and carbon nanotubes using the Pt–Si probe.The measurement results show that the high-order signal has the characteristics of less background,higher signal-to-noise ratio,and resolution up to 5.7 nm.展开更多
基金the Fundamental Research Foundation of Harbin Engineering University, (grant number HEUF 04017)
文摘A type of combined optical fiber interferometric acoustic emission sensor is proposed. The sensor can be independent on the laser source and make light interference by matching the lengths of two arms,so it can be used to monitor the health of large structure. Theoretical analyses indicate that the system can be equivalent to the Michelson interferometer with two optical fiber loop reflectors,and its sensitivity has been remarkably increased because of the decrease of the losses of light energy. PZT is powered by DC regulator to control the operating point of the system,so the system can accurately detect feeble vibration which is generated by ultrasonic waves propagating on the surface of solid. The amplitude and the frequency of feeble vibration signal are obtained by detecting the output light intensity of interferometer and using Fourier transform technique. The results indicate that the system can be used to detect the acoustic emission signals by the frequency characteristics.
文摘To keep even current distribution among DC/DC converters in a paralleled power system,an automatic master-slave control （AMSC） current sharing scheme is presented,which was implemented by a current share control IC. A current feedback loop for output voltage adjustment is proposed for low signal distortion. Moreover,a special startup control logic is designed to improve startup timing and to speed up the initial current sharing. It was completed in 1.5μm bipolar-CMOS-DMOS （BCD） technology with an area of 3.6mm^2 . Using it,a paralleled power system of two DC/DC converters capable of outputting 12V/3A was built. Experimental results show that the current sharing error at full load is kept within 1%.
基金the National Key Research and Development Program of China(No.2021YFF0700402)the Program for Science and Technology Innovation Group of Shaanxi Province(No.2019TD-011)+1 种基金the Key Research and Development Program of Shaanxi Province(No.2020DLGY04-02)the Fundamental Research Funds for the Central Universities for their support.
文摘The properties of near-field optics have always been the focus of nano-measurement technology.The 11th order effective nearfield optical signal with an incident laser wavelength of 1,550 nm is obtained using a platinum-coated optical probe(Pt–Si probe).The experimental results show that the local electric field intensity of the Pt–Si probe is nearly 30 times higher than that of silicon probe(Si probe).Therefore,the highest 7th order near-field optical imaging results are obtained with the Pt–Si probe.Further,near-field optical imaging is performed on samples such as gold grids and carbon nanotubes using the Pt–Si probe.The measurement results show that the high-order signal has the characteristics of less background,higher signal-to-noise ratio,and resolution up to 5.7 nm.
