REFINEMENTS OF THE NORM OF TWO ORTHOGONAL PROJECTIONS

In this paper,some refinements of norm equalities and inequalities of combination of two orthogonal projections are established.We use certain norm inequalities for positive contraction operator to establish norm inequalities for combination of orthogonal projections on a Hilbert space.Furthermore,we give necessary and sufficient conditions under which the norm of the above combination of o`rthogonal projections attains its optimal value.

Dynamically enhanced Autler–Townes splitting by orthogonal XUV fields

Based on numerical solutions of the time-dependent Schr ¨odinger equation, we theoretically investigate the photoelectron spectrum of hydrogen atoms ionized by a pair of ultrashort, intense, and orthogonally polarized laser pulses with a relative time delay in a pump–probe configuration. The pump pulse resonantly excites electrons from the 1s and 2p levels,inducing Rabi oscillations. The resulting dynamically enhanced Autler–Townes(AT) splitting is observed in the photoelectron energy spectrum upon interaction with the second probe pulse. In contrast to the previous parallel-polarization scheme, the proposed orthogonal-polarization configuration enables the resolution of dynamically enhanced AT splitting over a considerably wider range of probe photon energies.

Bright compact ultrabroadband source by orthogonal laser-sustained plasma

Laser-sustained plasma(LSP)source featuring high brightness and broadband spectral coverage is found to be powerful in various fields of scientific and industrial applications.However,the fundamental limit of low conversion efficiency constrains the system compactness and widespread applications of such broadband light sources.In this paper,we propose an innovative orthogonal LSP to break through the conversion efficiency limitation.Driven by the elevated conversion efficiency from absorbed laser power to ultraviolet(UV)emission,a compact broadband source(250–1650 nm)with UV spectral radiance exceeding 210 mW=emm2·sr·nmT is achieved with>100W pump laser.With the plot of a two-dimensional refractive index model,we report an important conceptual advance that the orthogonal design eliminates the influence of the negative lensing effect on laser power density.Experimental results unambiguously demonstrate that we achieve a bright compact UV-VIS-NIR source with negligible thermal loss and the highest conversion efficiency to our knowledge.Significant enhancement of 4 dB contrast-to-noise ratio(CNR)in spectral single-pixel imaging has been demonstrated using the proposed ultrabroadband source.By establishing the quantitative link between pumping optics design and plasma absorption,this work presents a compact broadband source that combines superior conversion efficiency and unprecedented brightness,which is essential to high-speed inspection and spectroscopy applications.

Optimization of Center of Gravity Position and Anti-Wave Plate Angle of Amphibious Unmanned Vehicle Based on Orthogonal Experimental Method

When the amphibious vehicle navigates in water,the angle of the anti-wave plate and the position of the center of gravity greatly influence the navigation characteristics.In the relevant research on reducing the navigation resistance of amphibious vehicles by adjusting the angle of the anti-wave plate,there is a lack of scientific selection of parameters and reasonable research of simulation results by using mathematical methods,and the influence of the center of gravity position on navigation characteristics is not considered at the same time.To study the influence of the combinations of the angle of the anti-wave plate and the position of the center of gravity on the resistance reduction characteristics,a numerical calculation model of the amphibious unmanned vehicle was established by using the theory of computational fluid dynamics,and the experimental data verified the correctness of the numerical model.Based on this numerical model,the navigation characteristics of the amphibious unmanned vehicle were studied when the center of gravity was located at different positions,and the orthogonal experimental design method was used to optimize the parameters of the angle of the anti-wave plate and the position of the center of gravity.The results show that through the parameter optimization analysis based on the orthogonal experimental method,the combination of the optimal angle of the anti-wave plate and the position of the center of gravity is obtained.And the numerical simulation result of resistance is consistent with the predicted optimal solution.Compared with the maximum navigational resistance,the parameter optimization reduces the navigational resistance of the amphibious unmanned vehicle by 24%.

Orthogonal matrix of polarization combinations:concept and application to multichannel holographic recording

Orthogonal matrices have become a vital means for coding and signal processing owing to their unique distributional properties.Although orthogonal matrices based on amplitude or phase combinations have been extensively explored,the orthogonal matrix of polarization combinations(OMPC)is a novel,relatively unexplored concept.Herein,we propose a method for constructing OMPCs of any dimension encompassing 4n(where n is 1,2,4,8,…)mutually orthogonal 2ncomponent polarization combinations.In the field of holography,the integration of polarization multiplexing techniques with polarization-sensitive materials is expected to emerge as a groundbreaking approach for multichannel hologram multiplexing,offering considerable enhancements in data storage capacity and security.A multidimensional OMPC enables the realization of multichannel multiplexing and dynamical modulation of information in polarization holographic recording.Despite consolidating all information into a single position within the material,we effectively avoided extraneous crosstalk during the reconstruction process.Our results show that achieving four distinct holographic images individually and simultaneously depends on the polarization combination represented by the incident wave.This discovery opens up a new avenue for achieving highly holographic information storage and dynamically displayed information,harnessing the potential of OMPC to expand the heretofore limited dimensionality of orthogonal polarization.

Optimal Design of High-Speed Partial Flow Pumps using Orthogonal Tests and Numerical Simulations

To investigate the influence of structural parameters on the performances and internal flow characteristics of partial flow pumps at a low specific speed of 10000 rpm,special attention was paid to the first and second stage impeller guide vanes.Moreover,the impeller blade outlet width,impeller inlet diameter,blade inclination angle,and number of blades were considered for orthogonal tests.Accordingly,nine groups of design solutions were formed,and then used as a basis for the execution of numerical simulations(CFD)aimed at obtaining the efficiency values and heads for each design solution group.The influence of impeller geometric parameters on the efficiency and head was explored,and the“weight”of each factor was obtained via a range analysis.Optimal structural parameters were finally chosen on the basis of the numerical simulation results,and the performances of the optimized model were verified accordingly(yet by means of CFD).Evidence is provided that the increase in the efficiency and head of the optimized model was 12.11%and 23.5 m,respectively,compared with those of the original model.

Manipulating the electron dynamics in the non-sequential double ionization process of Ar atoms by an orthogonal two-color laser field

Electron dynamics during non-sequential double ionization(NSDI) is one of the most attractive areas of research in the field of laser–atom or laser–molecule interaction. Based on the classic two-dimensional model, we study the process of NSDI of argon atoms driven by a few-cycle orthogonal two-color laser field composed of 800 nm and 400 nm laser pulses. By changing the relative phase of the two laser pulses, a localized enhancement of NSDI yield is observed at 0.5πand 1.5π, which could be attributed to a rapid and substantial increase in the number of electrons returning to the parent ion within extremely short time intervals at these specific phases. Through the analysis of the electron–electron momentum correlations within different time windows of NSDI events and the angular distributions of emitted electrons in different channels, we observe a more pronounced electron–electron correlation phenomenon in the recollision-induced ionization(RII) channel. This is attributed to the shorter delay time in the RII channel.

Optimization of short-circuit transition parameters of Q235B steel GMAW based on orthogonal gray relational analysis

In gas metal arc welding(GMAW)process,the short-circuit transition was the most typical transition observed in molten metal droplets.This paper used orthogonal tests to explore the coupling effect law of welding process parameters on the quality of weld forming under short-circuit transition,the design of 3 factors and 3 levels of a total of 9 groups of orthogonal tests,welding current,welding voltage,welding speed as input parameters:effective area ratio,humps,actual linear power density,aspect ratio,Vickers hardness as output paramet-ers(response targets).Using range analysis and trend charts,we can visually depict the relationship between input parameters and a single output parameter,ultimately determining the optimal process parameters that impact the single output index.Then combined with gray the-ory to transform the three response targets into a single gray relational grade(GRG)for analysis,the optimal combination of the weld mor-phology parameters as follows:welding current 100 A,welding voltage 25 V,welding speed 30 cm/min.Finally,validation experiments were conducted,and the results showed that the error between the gray relational grade and the predicted value was 2.74%.It was observed that the effective area ratio of the response target significantly improved,validating the reliability of the orthogonal gray relational method.

Optimization of Extraction Process of Fagopyri Dibotryis Rhizoma by Orthogonal Experiment

[Objectives]To optimize the water extraction process of Fagopyri Dibotryis Rhizoma.[Methods]The entropy weight method was used to determine the weight of epicatechin extraction rate and dry extract rate and calculate the comprehensive score.The water extraction process of Fagopyri Dibotryis Rhizoma was optimized by orthogonal design with the comprehensive score as the indicator and the amount of water,extraction time and extraction times as the factors.[Results]The optimum extraction process of Fagopyri Dibotryis Rhizoma was as follows:adding 10 times of water,extracting 3 times,and extracting for 60 min each time.[Conclusions]The optimized extraction process is stable and feasible,and can be used for the extraction of Fagopyri Dibotryis Rhizoma.

Steering the energy sharing of electrons in nonsequential double ionization with orthogonally polarized two-color field

Using the semiclassical ensemble model,the dependence of relative amplitude for the recollision dynamics in nonsequential double ionization(NSDI)of neon atom driven by the orthogonally polarized two-color field(OTC)laser field is theoretically studied.And the dynamics in two typical collision pathways,recollision-impact-ionization(RII)and recollisionexcitation with subsequent ionization(RESI),is systematically explored.Our results reveal that the V-shaped structure in the correlated momentum distribution is mainly caused by the RII mechanism when the relative amplitude of the OTC laser field is zero,and the first ionized electrons will quickly skim through the nucleus and share few energy with the second electron.As the relative amplitude increases,the V-shaped structure gradually disappears and electrons are concentrated on the diagonal in the electron correlation spectrum,indicating that the energy sharing after electrons collision is symmetric for OTC laser fields with large relative amplitudes.Our studies show that changing the relative amplitude of the OTC laser field can efficiently control the electron–electron collisions and energy exchange efficiency in the NSDI process.

Model Order Reduction Methods for Discrete Systems via Discrete Pulse Orthogonal Functions

This paper explores model order reduction(MOR)methods for discrete linear and discrete bilinear systems via discrete pulse orthogonal functions(DPOFs).Firstly,the discrete linear systems and the discrete bilinear systems are expanded in the space spanned by DPOFs,and two recurrence formulas for the expansion coefficients of the system’s state variables are obtained.Then,a modified Arnoldi process is applied to both recurrence formulas to construct the orthogonal projection matrices,by which the reduced-order systems are obtained.Theoretical analysis shows that the output variables of the reducedorder systems can match a certain number of the expansion coefficients of the original system’s output variables.Finally,two numerical examples illustrate the feasibility and effectiveness of the proposed methods.

The Related Properties of Generalized Orthogonal Group in Specific Normed Linear Spaces

Firstly, in the general normed linear space, the concepts of generalized isosceles orthogonal group, generalized Birkhoff orthogonal group, generalized Roberts orthogonal group, strong Birkhoff orthogonal group and generalized orthogonal basis are introduced. Secondly, the conclusion that any two nonzero generalized orthogonal groups must be linearly independent group is proven. And the existence of nonzero generalized orthogonal group and its linear correlation are discussed preliminarily, as well as some related properties of nonempty generalized orthogonal group in specific normed linear space namely the lp space.

Optimization and Testing for PCR System of Rice by Orthogonal Design

[Objective] This study was to screen the economic or stable PCR system of rice and detect the generality of the selected system in different molecular markers based on PCR.[Method] With DNA extracted from rice leaves by CTAB method as the template,PCR system was optimized by L16(45)orthogonal design.[Result] Clear bands were amplified from 16 different combinations,but the amplification effects and yields had difference.The most economic and applicable system was as follows:20 ng DNA template,150 μmol/L dNT...

Orthogonal变换与Nataf变换对FORM计算精度的影响分析

考虑随机变量的分布类型、功能函数的非线性程度、随机变量的变异性、随机变量之间的相关性等因素的影响,系统地对比分析了基于Orthogonal变换和Nataf变换的一次可靠度方法(FORM)的计算精度。研究表明:当随机变量的变异系数较小时,FORM的计算误差主要来源于Orthogonal变换或Nataf变换引起的非线性,而功能函数的非线性影响相对较小;同时,基于两种变换方法的FORM计算精度随着随机变量偏态系数绝对值的增大而降低;对于正态和对数正态分布类型,两种变换的计算精度相当,此时推荐采用Orthogonal变换;而对于极值Ⅰ型分布和移位瑞利分布类型,当随机变量的变异性和随机变量之间的相关性较小时,两种变换的计算精度相当;反之,当随机变量之间高度相关时,Orthogonal变换的误差较大,而Nataf变换的计算精度较好,此时推荐采用Nataf变换。进一步的研究表明,基于Orthogonal变换和Nataf变换的FORM同样适用于具有隐式功能函数的刚架结构,且两种方法的计算精度相当。

Optimization of SRAP-PCR System of Triticum aestivum——Based on Orthogonal Design

[Objective] The aim was to optimize the technical procedure of SRAP-PCR in Triticum aestivum L. [Method] The orthogonal design L16（45） was used to optimize SRAP-PCR amplification system of wheat Fengyou 68 on five factors （Taq polymerase,Mg2＋,DNA template,dNTPs and primer） at four levels. [Result] Effects of the five factors on SRAP-PCR reaction system were Mg2＋Taq polymerasedNTPsDNA templateprimer. Finally,an optimal SRAP-PCR system was established,that was the total 20 μl reaction system containing 2.0 μl 10×PCR Buffer,2.0 U Taq polymerase,2.0 mmol/L Mg2＋,0.2 mmol/L dNTPs,40 ng DNA template and 0.6 μmol/L primer. [Conclusion] The optimum SRAP-PCR system had provided some technical foundations to conduct SRAP genetic analysis for wheat varieties.

Research on 1-3 Orthogonal Anisotropic Piezoelectric Composite Material Sensors-

Piezoelectric composite material (PCM) is an important branch of modernsensor and actuator materials with wide applications in smart structures. In this paper, based onpiezoelectric ceramic, composite and experimental mechanics theories, a kind of 1-3 orthogonalanisotropic PCM (OAPCM) sensor is developed, and the sensing principle is analyzed to describesensor behaviors. In order to determine strain and stress on isotropic or orthogonal anisotropiccomponent surface, the relationships between strain and stress are established. The experimentalresearch on 1-3 OAPCM sensor is carried out in uniaxial and biaxial stress states. The results showthat 1-3 OAPCM sensors offer orthotropic properties of piezoelectricity, and sensing equations canbe used for strain or stress measurement with good accuracy.

Orthogonal genetic algorithm for solving quadratic bilevel programming problems

A quadratic bilevel programming problem is transformed into a single level complementarity slackness problem by applying Karush-Kuhn-Tucker（KKT） conditions.To cope with the complementarity constraints,a binary encoding scheme is adopted for KKT multipliers,and then the complementarity slackness problem is simplified to successive quadratic programming problems,which can be solved by many algorithms available.Based on 0-1 binary encoding,an orthogonal genetic algorithm,in which the orthogonal experimental design with both two-level orthogonal array and factor analysis is used as crossover operator,is proposed.Numerical experiments on 10 benchmark examples show that the orthogonal genetic algorithm can find global optimal solutions of quadratic bilevel programming problems with high accuracy in a small number of iterations.

An efficient two-step quantum key distribution protocol with orthogonal product states

An efficient two-step quantum key distribution （QKD） protocol with orthogonal product states in the （×）（n ≥3） Hilbert space is presented. In this protocol, the particles in the orthogonal product states form two particle sequences. The sender, Alice, first sends one sequence to the receiver, Bob. After Bob receives the first particle sequence, Alice and Bob check eavesdropping by measuring a fraction of particles randomly chosen. After ensuring the security of the quantum channel, Alice sends the other particle sequence to Bob. By making an orthogonal measurement on the two particle sequences, Bob can obtain the information of the orthogonal product states sent by Alice. This protocol has many distinct features such as great capacity, high efficiency in that it uses all orthogonal product states in distributing the key except those chosen for checking eavesdroppers.

An efficient quantum key distribution protocol with orthogonal product states

An efficient quantum key distribution （QKD） protocol with orthogonal product states in the 3 3 Hilbert space is presented. The sender, Alice, disorders the orthogonal product state sequence and sends it to Bob. After Alice has published the matching information of the particle sequence, Bob recovers the correct correspondences and makes an orthogonal measurement on the orthogonal product states to obtain the information sent by Alice. Finally, security analysis is also made.

Optimization of the Formula of Maca Lozenges by Orthogonal Test

The orthogonal experimental design was used to optimize the formula of maca lozenge and explore the preparation techniques and product property of maca lozenges. With the sensory evaluation of maca lozenge as the indicator, L16 （44） orthogonal design graph was used to select the optimal techniques, and to investigate the stability, heavy metals and microorganisms contents in the tablets. The optimal formula was 80% of maca power, 12% of Rhodiola rosea powder, and 6% of Angelica sinensis powder, where the comprehensive sensory index reached 246. Moreover, under the optimal conditions, various kinds of heavy metals contents were in consistent with the GB164740 standards, and there was no significant change in color, size, friability, and disintegration time, as well as microorganism content during the 12-month preservation. With simple, easy and reliable technique and quality control method, the process study had obtained the national patent process （patent number： ZL200810233796.X）, and the contents of heavy metals and micr6organisms laid foundation for the quality standard.