Design and Fabrication of MEMS Gyroscopes on the Silicon-on-insulator Substrate with Decoupled Oscillation Modes

The mode coupling is a major factor to affect the precision of the micro electromechanical systems（MEMS） gyroscope. Currently, many MEMS gyroscopes with separate oscillation modes for drive and detection have been developed to decrease the mode coupling, but the gyroscope accuracy can not satisfy the high-precision demand well. Therefore, high performance decoupled MEMS gyroscopes is still a hot topic at present. An innovative design scheme for a MEMS gyroscope is designed, and in this design, the inertial mass is divided into three parts including the inner mass, the outer mass and the main frame mass. The masses are supported and separated by a set of mutually orthogonal beams to decouple their movements. Moreover, the design is modelled by multi-port-element network（MuPEN） method and the simulation results show that the mode coupling of the gyroscope between driving and sensing mode was eliminated effectively. Furthermore, we proposed a new silicon-on-insulator（SOI） process to fabricate the gyroscope. The scale factor of the fabricated gyroscope is 8.9 mV/（（~）os） and the quality factor（Q-factor） is as high as 600 at atmosphere pressure, and then, the resonant frequency, scale factor and bias drift has been test. Process and test results show that the proposed MEMS gyroscope are effective for decrease mode coupling, furthermore, it can achieve a high performance at atmosphere pressure. Furthermore, the MEMS gyroscope can achieve a high performance at atmosphere pressure. The research can be taken as good advice for the design and fabrication of MEMS gyroscope, meanwhile, it also provides technical support for speeding up of MEMS gyroscope industrialization.

Oscillation Modes of Weld Pool in Stationary GTA Welding Using Structure Laser Method

Researchers have recently attempted to monitor pool oscillations using the three-dimensional laser vision method.However,the deficiency of simulation software will result in significant capital expenditure.Both simulations and experiments are performed in this study,and the Bessel equation is used to analyze the oscillation mode of a weld pool.The laser dot matrix images of(0,1),(1,1),(2,1),and(0,2)oscillation modes at different times are obtained via structured laser optical measurement simulation.The oscillation mode of a stationary gas tungsten arc weld pool is analyzed based on laser dot matrix images obtained from a structure laser experiment.Results show that the simulated laser dot matrix images are consistent with the experiment results.The oscillation mode of the weld pool can be recognized based on the laser dot matrix image.This study not only provides conditions for assessing the penetrating state of a weld pool,but also enable a further understanding of the oscillation mode of a weld pool and the development of more effective observation methods and measurement tools to effectively control and improve welding quality.

Optimization of Oscillation Model for Slab Continuous Casting Mould Based on Mould Friction Measurements in Plant Trial

Lubrication and friction between the mould and strand are strongly influenced by mould oscillation, and play an important role in slab quality and operating safety during continuous casting processes. Investigation of mould oscillation is therefore essential for getting a better online control of the mould processes. A feasible approach for the development and optimization of mould oscillation was put forward, which combined online measurement of mould friction, design of negative oscillating parameters and evaluation for powder consumption. Three different control models including sinusoidal and non-sinusoidal oscillation for mould oscillations were developed to investigate and evaluate the effects of oscillation on mould friction and powder lubrication. For the purpose of investigating mould friction between mould and strand, online measurement was carried out on a slab continuous caster equipped with a hydraulic oscillator. Also the comparison of the mould friction in sinusoidal and non-sinusoidal mould oscillation was made for subsequent analysis. The industrial experiment result shows that the combination of inverse control model and non-sinusoidal oscillation mode will contribute to the proper powder consumption, leading to a suitable effect of friction force on strand surface, especially for high speed continuous casting. The proposed method provides reliable basis for guiding and optimizing mould oscillation among control models, sinusoidal oscillation and non-sinusoidal oscillation.

Estimating inter-area dominant oscillation mode in bulk power grid using multi-channel continuous wavelet transform

This paper proposes a novel continuous wavelet transform(CWT) based approach to holistically estimate the dominant oscillation using measurement data from multiple channels. CWT has been demonstrated to be effective in estimating power system oscillation modes.Using singular value decomposition(SVD) technique, the original huge phasor measurement unit(PMU) datasets are compressed to finite useful measurement data which contain critical dominant oscillation information. Further,CWT is performed on the constructed measurement signals to form wavelet coefficient matrix(WCM) at the same dilation. Then, SVD is employed to decompose the WCMs to obtain the maximum singular value and its right eigenvector. A singular value vector with the entire dilation is constructed through the maximum singular values. The right eigenvector corresponding to the maximum singular value in the singular-value vector is adopted as the input of CWT to estimate the dominant modes. Finally, the proposed approach is evaluated using the simulation data from China Southern Power Grid(CSG) as well as the actual field-measurement data retrieved from the PMUs of CSG.The simulation results demonstrate that the proposed approach performs well to holistically estimate the dominant oscillation modes in bulk power systems.

Simplified Modelling of Oscillation Mode for Wind Power Systems

Wind turbine generators can be operated in various types of system configurations. Once the configurations change, the system oscillation mode shapes change accordingly.The modelling of the full system is necessary for studying this issue, yet it is quite hard. In this paper, a simple approach is developed to study the mode shapes of wind power systems without the necessity of adopting the complex full-system models.The key is that the q-d axis model of electric power system is transformed into the single-axis model, so that it could integrate with the equivalent circuit model of drive train mechanism. After analyzing some of the system configurations organized by the well-known MOD-2 wind turbine generator unit,the proposed approach is found to be effective for analyzing various oscillation modes such as the local torsional oscillations,as well as the inter-unit and inter-area oscillations.

Constraints on Non-Radial Oscillation Modes by Symmetry Energy Slope

The effect of the nuclear symmetry energy slope on the non-radial oscillation f-modes in neutron stars is calculated and discussed. Based on a conservative range of the symmetry energy slope constrained by the experiment and theoretical analysis, a constraint on the frequency and damping time of the gravitational radiation from the f-mode in neutron star is obtained. It is also shown that a higher symmetry energy slope corresponds with a smaller frequency and a longer damping time. Meanwhile, a new set of parameters is given to present the universal properties of the scaled frequency and damping time.

Earth's Free Toroidal Oscillations Observed by the JCZ-1 Seismometer

We firstly detected the Earth's free toroidal oscillations excited by three large earthquakes in Japan,2011,Chile,2010 and Indonesia,2005 from the observed data of the JCZ-1 seismometer at Wuhan Seismic Station. The eigenperiods of basic modes (0T2 - 0T67 ) and first modes (1T2 ～ 1T50 ) were detected,and their error ratios were less than 0. 5% by comparing the observed eigenvalues with the theoretical eigenvalues in PREM. We supplemented some modes- 0T11,0T15 , 0T19 , 1T4 , 1T5 and 1T14 ,which were not mentioned in PREM,and also observed the spectral line multi-peak phenomenon from 0T2, 0T6 , 0T7 and 0T8 . These results show that the JCZ-1 seismometer is able to precisely observe the Earth's long period toroidal free oscillations.

Mode-based Damping Torque Analysis in Power System Low-frequency Oscillations

The mode-based damping torque analysis(M-DTA)method for studying the effect of an external controller on power system low-frequency oscillations is proposed in this paper.First,based on the interconnection model between the system and the controller in the frequency domain,the oscillation loop corresponding to the electromechanical oscillation mode is built,and then the mode-based damping torque of the controller can be calculated.Then,the application of the M-DTA method in the power system is illustrated.The derivation shows that in the single-machine infinite-bus power system,the M-DTA method is completely equivalent to the classical damping torque analysis(C-DTA)method.In the multi-machine power system,the mode-based damping torque directily reflects the effect of the controller on the oscillation mode,overcoming the shortcomings of the C-DTA method in which there is no direct correspondence between the damping torque and the oscillation mode.By deriving the relationship with the residue index,the M-DTA method shows higher accuracy than the residue method in applications,such as controller parameter adjustment.Finally,two example power systems are presented to demonstrate the application of the proposed M-DTA method.Index Terms-Electromechanical oscillation mode,FACTS,interconnection model in the frequency domain,mode-based damping torque analysis(M-DTA),power system low-frequency oscillation,PSS,residue method.

AN EXPERIMENTAL STUDY ON THE COHERENT STRUCTURES AND CHAOTIC PHENOMENA IN THE AXISYMMETRIC COUNTERCURRENT SHEAR FLOW

The coherent structures and the chaotic phenomena in the transition of the axisymmetric countercurrent mixing shear flow were investigated experimentally. Two kinds of self-excited oscillation modes could exist in the axisymmetric countercurrent mixing shear flow. One is the shear layer self-excited oscillation mode corresponding to the high Reynolds number regime and the other is the jet column self-excited oscillation mode corresponding to the low Reynolds number regime in the case of the velocity ratio ranging from I to 1.5. Analyzing the auto-power spectrum, self-correlation-function and three dimensional reconstructed phase trajectory, the route to chaos through three Hopf bifurcations intercepted by an intermittence of the dynamical system corresponding to the axisymmetric countercurrent mixing shear flow was discovered when the velocity ratio is equal to 1.32.

Surface Modification of Cu-Cr Complex by NIR and MIR Laser

Irradiated by infrared laser, the surface reducibility and adsorbability of Cu-Cr complex could be improved, owing to the interaction of photo-fragmentation and laser texturing. Analyzed by the binding energy spectra and the auger spectra, the valence states of chromium ion and copper ion were+3 and+1 after radiation respectively, which still had the reducibility to release electrons. In contrast with the near-infrared(NIR)1 064 nm and mid-infrared(MIR) 10 600 nm laser at the same average output power of 15 W, the reduced metal percentage in the Cu-Cr complex was obviously distinguished at the depth from nanometer to micron. After chemical plating, the average coating thickness and mean-square deviation of the NIR sample were 11.61 μm and 0.30 for copper layer, and 2.69 μm and 0.08 for nickel layer. The results were much better than those of the MIR sample.

Cosmic Ether, Possessing Electric-Tension and Magnetic-Resistance, Is the Unified Field for Physics

The paper presents the case that physics is already and effectively unified by the energetic tension field, ether. We identify this integrating power of ether first, by re-defining the action generating parameters of this energetic tension field as the electric-tension, , and the magnetic-resistance, μ0, while re-deriving the Maxwell’s wave equation in analogy with the mechanically stretched string, where the . Then, replacing by and m0 by , one can find that almost all working physics theories are being energized byand μ0. To complete the unification, we can now postulate that the particles are also freely propagating EM waves, but they are spatially localized as in-phase, close-looped (IP-CL) vortex-like propagation modes of ether. Because of their IP-CL mode structure, they have space-finite spatial structures and remain spatially stationary in the absence of any spatially influencing potential gradients (forces) in their vicinity. Particles’ harmonic phase driven interactions between quantum particles give birth to the appearance of wave-particle duality. There is no need for the confusing and unnecessary de Broglie’s Pilot Wave. The inertia to spatial motion of IP-CL modes automatically accommodates Newton’s laws of motion. The cosmic universality of Maxwellian wave velocity, and particles as IP-CL modes, jointly accommodate the two key postulates of special relativity without the need for unphysical four-dimensionality. The observable universe is represented only by its diverse oscillatory excited states. The stable and stationary Cosmic Ether keeps holding 100% of its energy all the time. We have proposed a one-way light pulse propagation experiment to directly validate the existence of ether, rather than approaching Michelson’s way of measuring the ether drag. We have identified a good number of examples of working theoretical expressions in terms of and μ0 and presented our critical views in physics thinking, belonging to Classical, Relativity, Quantum and Cosmology Physics.

Experimental Investigation of the Transonic Shock Oscillation Characteristics in a Heavy-Duty Gas Turbine Compressor Cascade

This paper presents an experimental study of the self-sustained transonic shock oscillating behaviors in a heavy-duty gas turbine compressor cascade under the inlet Mach number of 0.85,0.90 and 0.95.The transonic shock patterns and the surface flow structures are captured by schlieren imaging and oil flow visualization.The time-averaged and instantaneous transonic shock oscillating behaviors at the near choke point and the near stall point are investigated by the Anodized Aluminum Pressure-Sensitive Paint(AA-PSP)surface pressure measurement.The normal passage shock dominant pattern and the detached bow shock dominant pattern at the near choke point and the near stall point are experimental characterized,respectively.The passage shock oscillation behaviors at the near choke point have been observed to undergo periodic pressure perturbations of the shock shift between the upstreamλshock feet mode and the downstreamλshock feet mode.The detached bow shock oscillation behaviors at the near stall point have been observed to undergo the pressure perturbations of the shock cycle movement between the upstream detached bow shock mode and the downstream detached bow shock mode.The differences between the shock shift mode and the shock cycle movement mode lead to the different streamwise oscillation travel ranges and different shock intensity variations under the same inlet Mach number.

Simplified equivalent models of large-scale wind power and their application on small-signal stability

With the rapid growth of grid-connected wind power penetration level,it is necessary to study the impacts of wind power on power system stability.The small-signal stability of power systems with large-scale wind power is explored using the eigenvalue analysis method.A prototype sample system,the two-synchronous-generator system with a wind farm,is proposed for theoretical analysis.Then,simplified models of wind turbines(WTs)and the corresponding equivalent models of wind farms are analyzed.Three kinds of typical WT models,i.e.,squirrel cage induction generator,doubly-fed induction generator,and permanent magnet synchronous generator are used.Furthermore,based on the simplified equivalent models,effects of large-scale wind farms on the electromechanical oscillation modes(EOMs)of synchronous systems are discussed.Simulation results indicate that wind farms of the three kinds of WTs have positive effects on EOMs.However,long transmission lines connecting wind farmto the systemmay produce negative effects on the small-signal stability of the system.

1.3 kW monolithic linearly polarized single-mode master oscillator power amplifier and strategies for mitigating mode instabilities

We report on the high-power amplification of a 1064 nm linearly polarized laser in an all-fiber polarizationmaintained master oscillator power amplifier,which can operate at an output power level of 1.3 kW.The beam quality(M^2) was measured to be <1.2 at full power operation.The polarization extinction rate of the fiber amplifier was measured to be above 94% before mode instabilities(MIs) set in,which reduced to about 90% after the onset of MI.The power scaling capability of strategies for suppressing MI is analyzed based on a semianalytical model,the theoretical results of which agree with the experimental results.It shows that mitigating MI by coiling the gain fiber is an effective and practical method in standard double-cladding large mode area fiber,and,by tight coiling of the gain fiber to the radius of 5.5 cm,the MI threshold can be increased to three times higher than that without coiling or loose coiling.Experimental studies have been carried out to verify the idea,which has proved that MI was suppressed successfully in the amplifier by proper coiling.

Impact of Grid Connection of Large-Scale Wind Farms on Power System Small-Signal Angular Stability

The grid connection of a large-scale wind farm could change the load flow/configuration of a power system and introduce dynamic interactions with the synchronous generators(SGs),thus affecting system small-signal angular stability.This paper proposes an approach for the separate examination of the impact of those affecting factors,i.e.,the change of load flow/configuration and dynamic interactions brought about by the grid connection of the wind farm,on power system smallsignal angular stability.Both cases of grid connection of the wind farm,either displacing synchronous generators or being directly added into the power system,are considered.By using the proposed approach,how much the effect of the change of load flow/configuration brought about by the wind farm can be examined,while the degree of impact of the dynamic interaction of the wind farm with the SGs can be investigated separately.Thus,a clearer picture and better understanding of the power system small-signal angular stability as affected by grid connection of the large-scale wind farm can be achieved.An example of the power system with grid connection of a wind farm is presented to demonstrate the proposed approach.

Small-signal Angular Stability of Power System as Affected by Grid-connected Variable Speed Wind Generators—A Survey of Recent Representative Works

This paper reviews the status and progress of the investigation on power system small-signal angular stability as affected by grid-connected variable speed wind generators(VSWGs).The review is carried out on the basis of a survey of recently published representative papers.Strategies of the investigation made in those selected papers are classified into two groups:1)VSWGs displacing synchronous generators(SGs);2)VSWGs simply being added in a power system.The diversification of the results of the investigation is highlighted in the survey.Careful analysis on two strategies of the investigation is conducted in this paper.It is revealed that in the strategy of VSWGs displacing SGs,there are two factors which could affect power system small-signal angular stability differently:1)Withdrawing the SGs’dynamics;2)adding the VSWGs’dynamics.In the strategy of adding VSWGs in the power system,there are also two affecting factors:1)Change of load flow brought about by the VSWGs;2)dynamic interactions with the SGs introduced by the VSWGs.Hence diversified results of the investigation obtained so far are not only due to the dependence of the investigation on sample power systems used,but also caused by the mixture of different affecting factors.This paper is concluded with a summary of key issues of the investigation for future work.

Detached-eddy simulation of supersonic flow past a spike-tipped blunt nose

Space vehicle in atmosphere travels mostly at supersonic speed and generates a very strong bow shockwave around its blunt nose. Oblique shock and conical separated flow zone generated by a forward disk-tip spike significantly reduce the drag by reducing the high pressure area on the blunt nose. This study employs improved delayed detached eddy simulation to investigate the characteristic flow structures around a spike-tipped blunt nose at Mach number of 3 and Reynolds number（based on the blunt-body diameter） of 2.72x10;. The calculated time-averaged quantities agree well with experimental data. Characteristic frequencies in different flow regions are extracted using fast Fourier transform. It is found that two distinct instability modes exist: oscillation mode and pulsation mode. The former is related to the foreshock/turbulence interaction with nondimensional frequency at around 0.004. The latter corresponds to the interaction between turbulence and shock structures around the blunt nose, with a typical coherent structure shedding frequency at 0.092.

A kind of magnetron cavity used in rubidium atomic frequency standards

Research on the magnetron cavity used in the rubidium atomic frequency standards is developed, through which the main characteristic parameters of the magnetron cavity are studied, mainly including the resonant frequency, quality factor and oscillation mode. The resonant frequency and quality factor of the magnetron cavity were calculated, and the test results of the resonant frequency agreed well with the calculation theory. The test results also show that the resonant frequency of the magnetron cavity can be attenuated to 6.835 GHz, which is the resonant frequency of the rubidium atoms, and the Q-factor can be attenuated to 500-1000. The oscillation mode is a typical TEoll mode and is the correct mode needed for the rubidium atomic frequency standard. Therefore these derivative magnetron cavities meet the requirements of the rubidium atomic frequency standards well.