Phase transformation is one of the factors that would significantly influence the ability to resist cavitation erosion of stainless steels. Due to the specific properties of duplex stainless steel, the heat treatment ...Phase transformation is one of the factors that would significantly influence the ability to resist cavitation erosion of stainless steels. Due to the specific properties of duplex stainless steel, the heat treatment would bring about significant phase transformations. In this paper, we have examined the previous studies on the phase transition of stainless steel, including the literature on the classification of stainless steel, spinodal decomposition, sigma phase transformation, and cavitation erosion of double stainless steel. Through these literature investigations, the destruction of cavitation erosion on duplex stainless steel can be clearly known, and the causes of failure of duplex stainless steel in seawater can be clarified, thus providing a theoretical basis for subsequent scientific research. And the review is about to help assess the possibility of using bulk heat treatment to improve the cavitation erosion (CE) behaviour of the duplex stainless steel 7MoPLUS.展开更多
Both furnace cooled and as-cast eutectoid Zn-Al alloys were investigated under external tensile stress at 100℃. It was observed that the external tensile stress caused decomposition of two metastable phases η'T ...Both furnace cooled and as-cast eutectoid Zn-Al alloys were investigated under external tensile stress at 100℃. It was observed that the external tensile stress caused decomposition of two metastable phases η'T and η'S which derived from both original state of the alloy, and a phase transformation, αf +ε→T' +η, in both furnace cooled and as-cast eutectoid Zn-Al alloys. Also spheroidized structure formed partially during tensile testing. Superplasticity of the alloy has been discussed correlating with the phase transformations and microstructural changes.展开更多
The phase transformations in Ti-10V-2Fe-3AI alloy during aging have been studied by means of X-ray diffraction and TEM techniques.The morphology and distribution of precipi- tated phases were examined.The lattice para...The phase transformations in Ti-10V-2Fe-3AI alloy during aging have been studied by means of X-ray diffraction and TEM techniques.The morphology and distribution of precipi- tated phases were examined.The lattice parameters of α and β phases as a function of the ag- ing time is obtained,the hardness variation of the specimens related to the aging temperature and time has been given as well.展开更多
Intermetallics and phase transformations of the zirconium-based alloy, Zr-1.0Sn-0.3Nb-0.3Fe-0.1Cr, were investigated by conventional X-ray diffraction (XRD), differential scanning calorimetry (DSC), and dilation m...Intermetallics and phase transformations of the zirconium-based alloy, Zr-1.0Sn-0.3Nb-0.3Fe-0.1Cr, were investigated by conventional X-ray diffraction (XRD), differential scanning calorimetry (DSC), and dilation measurement. Three types of precipitates, namely, (ZrNb)2Fe, Zr(CrFe)2, and Zr3Fe, were detected by XRD. The cubic Ti2Ni-type (ZrNb)2Fe was found to be the main precipitate in the alloy, and it was proposed to dissolve at 861℃, whereas Zr3Fe dissolved at 780℃ and Zr(CrFe)2 at 814℃. No precipitates were observed at a temperature higher than 900℃. The transformation-start temperature of α-Zr → β-Zr was reconfirmed to be 780℃, and the end temperature of α-Zr →βZr was determined to be 955℃. The dilation result also revealed that the martensitic transformation-start temperature, Ms, and the finish temperature, Mf, of this alloy were 741℃ and 645℃, respectively.展开更多
The microstructural evolution and phase transformations of mechanically stirred non-dendritic ZA27 alloy during partial remelting were studied by using scanning electron microscopy and X-ray diffraction technique.The ...The microstructural evolution and phase transformations of mechanically stirred non-dendritic ZA27 alloy during partial remelting were studied by using scanning electron microscopy and X-ray diffraction technique.The partial remelting temperature was 460℃ and lower than the stirring temperature of 465℃.So the microstructure with globular grains needed for semi-solid forming can not be obtained and the starting primary non-dendritic grains change in turn to connect non-dendritic grains, long chain-like structures and finally to coarsen connect grains.However,the small near-equiaxed grains between the primary non-dendritic grains are evolved into small globular grains gradually,some of which are also attached to the primary non-dendritic grains during the subsequent heating.The X-ray diffraction results show that a series of phase transformations, α+η+ε→β,η+β→L,β→α′+L,α+η+ε→α′ and α′→L, occur successively during this process.The main reason why the starting primary non-dendritic grains do not separate into the needed independent globular grains is that the reactions of η+β→L and α′→L do not occur or occurr incompletely in the layers used to connect the primary non-dendritic grains.展开更多
The effects of shock loading on the morphology,grain growth during heating and phase transforma- tion of ZrO_2 have been investigated.It is shown that shock loading may be efficiently used to modify submicron ceramic ...The effects of shock loading on the morphology,grain growth during heating and phase transforma- tion of ZrO_2 have been investigated.It is shown that shock loading may be efficiently used to modify submicron ceramic powders with nanocrystalline structure.After shock loading,the critical diameter of ZrO_2 particles transformed from tetragonal to monoclinic decreased due to stored strain energy. Annealing of powders resulted in reversible transformation to the tetragonal without considerable grain growth up to 1200℃.展开更多
The effect of prior microstructure on the kinetics of the α- β phase transformation in Zr-1.14 wt%Cr 0.08 wt%Fe alloy was studied. Specimens of different metallurgical histories and hence microstructures were prepar...The effect of prior microstructure on the kinetics of the α- β phase transformation in Zr-1.14 wt%Cr 0.08 wt%Fe alloy was studied. Specimens of different metallurgical histories and hence microstructures were prepared. Thermoelectric power (TEP) measurements and optical metallographt wereused to examine the transformations produced in these three kinds of specimens when they were reheated totemperatures 800~100℃ at different heating rates (slow and fast). The results indicate that the kinetics ofthe α-βphase transformation is strongly influenced by the metallurgical history of specimens. The presenceof nonequilibnum structures accelerates the phase transformation in the alloy and decreases the x-β transfor-mation temperature from 950℃ to 870℃. The influence of experimental conditions on the transformationkinetics is more complicated than that of metallurgical history. For an heated and as-received specimens, theα-βtransformation kinetics of the fast-heated specimens is slower than for the slow-heated specimens. How-ever. in the quenched specimens, the transformation kinetics of slow-heated specimens is greater than in fastheated specimens. This behaviour may be related to the size and shape of the Zr(CrFe)_2 precipitates andthe homogenization of the matrix.展开更多
A new continuous multi-phase transformation field model was established for liquid-solid-eutectoid transformation. Taking Fe-C alloy as an example, the model was used to simulate the evolution of the micro-morphology ...A new continuous multi-phase transformation field model was established for liquid-solid-eutectoid transformation. Taking Fe-C alloy as an example, the model was used to simulate the evolution of the micro-morphology of the liquid-solid phase transition, and the effects of temperature, solute and free energy on the nucleation of pearlite after the liquid-solid phase transition were analyzed. The micro-morphology of pearlite was simulated. The simulation results show that the austenite structure has hereditary effect on the pearlite, the morphology of pearlite structure was similar to that of the parent austenite. The eutectoid structure at the front of pearlite grows toward the interior of austenite grains in a bifurcation manner and in the spherical coronal shape. In addition, the growth rate of pearlite was related to the shape of concave-convex interface at the nucleation site, and the growth rate at the convex interface was faster than that at the concave interface.展开更多
Rare-earth(RE)elements,known as“industrial vitamins”,have permeated modern lives,especially in high-tech applications.Although the RE elements possess close chemical similarities and have been treated as“one elemen...Rare-earth(RE)elements,known as“industrial vitamins”,have permeated modern lives,especially in high-tech applications.Although the RE elements possess close chemical similarities and have been treated as“one element”in the periodic table,their characteristics differ from each other.The RE microalloying effect is the crux to ameliorate the physicomechanical and thermochemical properties of materials,thereby the study of RE-related phase diagrams becomes indispensable to the design and optimization of RE-containing materials.However,in reality,the knowledge base in this area is considerably scarce compared with that of other commonly-used elements.In this work,the phase equilibria,phase diagrams,phase transformations,and some recent examples of RE-containing materials design are summarized,with which one can predict the RE solubilities,the RE precipitates,as well as the corresponding service behaviors.The attainment of enhanced materials’properties suggests that the thermodynamic rules extracted from the phase diagrams could serve as fundamental criteria for the successful development of novel RE-containing materials.展开更多
Effects of solute rare earth(RE)on continuous cooling transformation of a low-alloy Cr–Mo–V bainitic steel are investigated in detail by dilatometry,optical microscopy(OM),scanning electron microscopy(SEM)and transm...Effects of solute rare earth(RE)on continuous cooling transformation of a low-alloy Cr–Mo–V bainitic steel are investigated in detail by dilatometry,optical microscopy(OM),scanning electron microscopy(SEM)and transmission electron microscopy(TEM).Microstructures appeared in thermal dilatometric samples of both low-alloy Cr–Mo–V(RE)steels are composed of quasi-polygonal ferrite(QPF),degenerate pearlite(DP),granular bainite(GB),lath bainite(LB),and martensite(M)depending on cooling rate.When cooling rate is lower than 2°C/s,the addition of RE suppresses QPF transformation,and thereby inducing a broader transformation region of GB.When cooling rate ranges from 2 to 100°C/s,the addition of RE decreases the start temperature of bainitic transformation distinctly,which results in finer bainitic ferrite grain size and higher dislocation density.The addition of RE can enhance the hardness of the low alloy Cr–Mo–V steel by affecting the aforementioned diffusional and/or partly displacive transformation.However,when cooling rate increases up to 150°C/s,two steels have the same hardness value of about 435 HV due to only martensite obtained by displacive transformation.展开更多
The mechanism involved in the phase transformation process of pyrolusite (MnO_(2)) during roasting in a reducing atmosphere was systematically elucidated in this study,with the aim of effectively using low-grade compl...The mechanism involved in the phase transformation process of pyrolusite (MnO_(2)) during roasting in a reducing atmosphere was systematically elucidated in this study,with the aim of effectively using low-grade complex manganese ore resources.According to single-factor experiment results,the roasted product with a divalent manganese (Mn^(2+)) distribution rate of 95.30% was obtained at a roasting time of 25 min,a roasting temperature of 700℃,a CO concentration of 20at%,and a total gas volume of 500 mL·min^(-1),in which the manganese was mainly in the form of manganosite (MnO).Scanning electron microscopy and Brunauer–Emmett–Teller theory demonstrated the microstructural evolution of the roasted product and the gradual reduction in the pyrolusite ore from the surface to the core Thermodynamic calculations,X-ray photoelectron spectroscopy,and X-ray diffractometry analyses determined that the phase transformation of pyrolusite followed the order of MnO_(2)→Mn_(2)O_(3)→Mn_(3)O_(4)→MnO phase by phase,and the reduction of manganese oxides in each valence state proceeded simultaneously.展开更多
A time-resolved x-ray diffraction technique is employed to monitor the structural transformation of laser-shocked bismuth.Results reveal a retarded transformation from the shock-induced Bi-Ⅴphase to a metastable Bi-...A time-resolved x-ray diffraction technique is employed to monitor the structural transformation of laser-shocked bismuth.Results reveal a retarded transformation from the shock-induced Bi-Ⅴphase to a metastable Bi-Ⅳphase during the shock release,instead of the thermodynamically stable Bi-Ⅲphase.The emergence of the metastable Bi-Ⅳphase is understood by the competitive interplay between two transformation pathways towards the Bi-Ⅳand Bi-Ⅲ,respectively.The former is more rapid than the latter because the Bi-Ⅴto B-Ⅳtransformation is driven by interaction between the closest atoms while the Bi-Ⅴto B-Ⅲtransformation requires interaction between the second-closest atoms.The nucleation time for the Bi-Ⅴto Bi-Ⅳtransformation is determined to be 5.1±0.9 ns according to a classical nucleation model.This observation demonstrates the importance of the formation of the transient metastable phases,which can change the phase transformation pathway in a dynamic process.展开更多
Various solid state phase transformations exist in metastable β-type Ti alloys,which can be employed to optimize the mechanical properties.In this paper,synchrotron X-ray diffraction(SXRD)experiments were carried out...Various solid state phase transformations exist in metastable β-type Ti alloys,which can be employed to optimize the mechanical properties.In this paper,synchrotron X-ray diffraction(SXRD)experiments were carried out to study the phase transformations of a Ti36Nb5Zr alloy subjected to different thermomechanical treatments.Furthermore,the correlation between the phase constitutions and the mechanical properties was discussed.The a" texture formed,and high-density defects were introduced after cold rolling of the solution treated specimen,leading to the decrease in Young’s modulus and the increase in strength.The cold-rolled specimens were then annealed at temperatures from 423 to 773 K for 30 min.Both the Young’s modulus and strength increased with annealing temperatures increasing up to 673 K,which resulted from the precipitation of the ω and/or α phases.With further increase in annealing temperatures to 773 K,the β→α precipitation replaced the β→ω_(iso) phase transformation,and the density of defects decreased,leading to the decrease in both the Young’s modulus and strength.These results provide theoretical basis for the design biomedical Ti alloys with both low Young’s modulus and high strength.展开更多
Thermally induced evolution of phase transformations is a basic physical-chemical process in the dissociation of gas hydrate in sediment (GHS). Heat transfer leads to the weakening of the bed soil and the simultaneous...Thermally induced evolution of phase transformations is a basic physical-chemical process in the dissociation of gas hydrate in sediment (GHS). Heat transfer leads to the weakening of the bed soil and the simultaneous establishment of a time varying stress field accompanied by seepage of fluids and deformation of the soil. As a consequence, ground failure could occur causing engineering damage or/and environmental disaster. This paper presents a simplified analysis of the thermal process by assuming that thermal conduction can be decoupled from the flow and deformation process. It is further assumed that phase transformations take place instantaneously. Analytical and numerical results are given for several examples of simplified geometry. Experiments using Tetra-hydro-furan hydrate sediments were carried out in our laboratory to check the theory. By comparison, the theoretical, numerical and experimental results on the evolution of dissociation fronts and temperature in the sediment are found to be in good agreement.展开更多
A computational approach based on the thermal elastic plastic finite element method was developed for predicting welding residual stress in low carbon alloyed steel welds by taking into account the effect of the solid...A computational approach based on the thermal elastic plastic finite element method was developed for predicting welding residual stress in low carbon alloyed steel welds by taking into account the effect of the solid-state phase transformations. The kinetics of phase transformations was described by Johnson Mehl Avrami Kolmogrov (JMAK) equation for bainitic transition and by Koistinen-Marburger (K-M) relationship for martensitic transition. Moreover, an additive rule depending on volumetric phase fraction was adopted to represent the material property changes during heating and cooling. Consequently, the residual welding stresses in a 2.25Cr1Mo steel TIG welded plate were computed. Early calculation results suggest that the bainitic and martensitic transformations took place in the weld the heat-affected zone drastically reduce the residual longitudinal tensile stress in the region.展开更多
The phase transformations during thermomechanical processing can be employed to optimize mechanical properties of β-type Ti alloys.However,such understandings are still lacking for the alloy consisting of dual β+α&...The phase transformations during thermomechanical processing can be employed to optimize mechanical properties of β-type Ti alloys.However,such understandings are still lacking for the alloy consisting of dual β+α" phases in solution-treated and quenched state.In this paper,the phase transformations in a Ti38 Nb model alloy subjected to different thermomechanical processing were investigated by using synchrotron X-ray diffraction(SXRD) experiments,and their influence on the Young’s modulus was discussed.The results indicated that highdensity dislocations introduced by cold rolling still existed after annealing at temperatures lower than 573 K,which can decrease the martensitic transformation start temperature to below room temperature.With annealing temperatures increasing,the α"→β,β→ω_(iso),and β→α phase transformations occurred successively.At annealing temperature of 473 K,the specimen consisted of a trace of α"and ω phases as well as dominant β phase which was kept to room temperature by the high density of dislocations,rather than by the chemical stabilization.As a result,an ultralow Young’s modulus of 25.9 GPa was realized.Our investigation not only provides in-depth understandings of the phase transformations during thermomechanical processing of β-type Ti alloys,but also sheds light on designing biomedical Ti alloys with ultralow Young’s modulus.展开更多
While there have been multiple recent reports in the literature focusing on the effects of magnetic field on the phase transformation behaviors,the research conducted with an ultra-high magnetic field greater than 20 ...While there have been multiple recent reports in the literature focusing on the effects of magnetic field on the phase transformation behaviors,the research conducted with an ultra-high magnetic field greater than 20 T is still preliminary.In the current study,the structure evolution of Co-B alloys are experimentally studied with undercooling.The effects of a 25 T magnetic field on the solidification behavior and the subsequent solid-state phase transformation behavior have been investigated.The 25 T magnetic field is confirmed to have little effect on the homogeneous nucleation,but have some influence on the heterogeneous nucleation of Co_(3) B and Co_(23)B6 phases by modifying the wetting angleθ.The decomposition of Co_(23)B6 phase in the subsequent cooling process can be effectively suppressed by applying the 25 T magnetic field.The present work might be helpful for not only theoretically understanding the influence of ultra-high magnetic field on the phase transformation behaviors but a potential technology of field-manipulation of magnetic materials.展开更多
Tin(Sn)holds great promise as an anode material for next-generation lithium(Li)ion batteries but suffers from massive volume change and poor cycling performance.To clarify the dynamic chemical and microstructural evol...Tin(Sn)holds great promise as an anode material for next-generation lithium(Li)ion batteries but suffers from massive volume change and poor cycling performance.To clarify the dynamic chemical and microstructural evolution of Sn anode during lithiation and delithiation,synchrotron X-ray energydispersive diffraction and X-ray tomography are simultaneously employed during Li/Sn cell operation.The intermediate Li-Sn alloy phases during de/lithiation are identified,and their dynamic phase transformation is unraveled which is further correlated with the volume variation of the Sn at particle-and electrode-level.Moreover,we find that the Sn particle expansion/shrinkage induced particle displacement is anisotropic:the displacement perpendicular to the electrode surface(z-axis)is more pronounced compared to the directions(x-and y-axis)along the electrode surface.This anisotropic particle displacement leads to an anisotropic volume variation at the electrode level and eventually generates a net electrode expansion towards the separator after cycling,which could be one of the root causes of mechanical detachment and delamination of electrodes during long-term operation.The unraveled chemical evolution of Li-Sn and deep insights into the microstructural evolution of Sn anode provided here could guide future design and engineering of Sn and other alloy anodes for high energy density Li-and Na-ion batteries.展开更多
To explore the effect of temperature on the phase transformation of HCP→FCC during compression, the uniaxial compression process of AZ31 magnesium alloy was simulated by the molecular dynamics method, and the changes...To explore the effect of temperature on the phase transformation of HCP→FCC during compression, the uniaxial compression process of AZ31 magnesium alloy was simulated by the molecular dynamics method, and the changes of crystal structure and dislocation evolution were observed. The effects of temperature on mechanical properties, crystal structure, and dislocation evolution of magnesium alloy during compression were analyzed. It is concluded that some of the Shockley partial dislocation is related to FCC stacking faults. With the help of TEM characterization, the correctness of the correlation between some of the dislocations and FCC stacking faults is verified. Through the combination of simulation and experiment, this paper provides an idea for the in-depth study of the solid-phase transformation of magnesium alloys and provides reference and guidance for the design of magnesium alloys with good plasticity and formability at room temperature.展开更多
The effects of Nb addition,individually and in combination with Ti,were evaluated over a range of coiling temperatures.Coiling temperature influences the ratio of soluble and precipitated Nb in the hot rolled steel co...The effects of Nb addition,individually and in combination with Ti,were evaluated over a range of coiling temperatures.Coiling temperature influences the ratio of soluble and precipitated Nb in the hot rolled steel containing 0.08 % C and 2.2 % Mn.Nb bearing precipitates can co-precipitate on TiN and impact the microstructure and mechanical properties of the steel after annealing treatment.Microstructure characterization revealed that recovery and recrystallization processes preceded austenite formation.The effects of Nb on austenite formation in cold rolled steels during heating and isothermal holding and on austenite decomposition during subsequent cooling were investigated using dilatometry.The addition of Nb retarded ferrite recrystallization starting temperature,but had no significant effect on the starting temperature of austenite formation during heating.The Nb addition also accelerated austenite formation once the transformation started,and was beneficial for the formation of a finer and homogeneous microstructure.展开更多
文摘Phase transformation is one of the factors that would significantly influence the ability to resist cavitation erosion of stainless steels. Due to the specific properties of duplex stainless steel, the heat treatment would bring about significant phase transformations. In this paper, we have examined the previous studies on the phase transition of stainless steel, including the literature on the classification of stainless steel, spinodal decomposition, sigma phase transformation, and cavitation erosion of double stainless steel. Through these literature investigations, the destruction of cavitation erosion on duplex stainless steel can be clearly known, and the causes of failure of duplex stainless steel in seawater can be clarified, thus providing a theoretical basis for subsequent scientific research. And the review is about to help assess the possibility of using bulk heat treatment to improve the cavitation erosion (CE) behaviour of the duplex stainless steel 7MoPLUS.
文摘Both furnace cooled and as-cast eutectoid Zn-Al alloys were investigated under external tensile stress at 100℃. It was observed that the external tensile stress caused decomposition of two metastable phases η'T and η'S which derived from both original state of the alloy, and a phase transformation, αf +ε→T' +η, in both furnace cooled and as-cast eutectoid Zn-Al alloys. Also spheroidized structure formed partially during tensile testing. Superplasticity of the alloy has been discussed correlating with the phase transformations and microstructural changes.
文摘The phase transformations in Ti-10V-2Fe-3AI alloy during aging have been studied by means of X-ray diffraction and TEM techniques.The morphology and distribution of precipi- tated phases were examined.The lattice parameters of α and β phases as a function of the ag- ing time is obtained,the hardness variation of the specimens related to the aging temperature and time has been given as well.
基金the Foundation of Key Laboratory of National Defense Technologythe National Key Laboratory for Nuclear Fuel and Materials (No. 00JS85.9.1GX0101)the Science Foundation of Guangxi Province, China (Nos. 0448022 and 0728060)
文摘Intermetallics and phase transformations of the zirconium-based alloy, Zr-1.0Sn-0.3Nb-0.3Fe-0.1Cr, were investigated by conventional X-ray diffraction (XRD), differential scanning calorimetry (DSC), and dilation measurement. Three types of precipitates, namely, (ZrNb)2Fe, Zr(CrFe)2, and Zr3Fe, were detected by XRD. The cubic Ti2Ni-type (ZrNb)2Fe was found to be the main precipitate in the alloy, and it was proposed to dissolve at 861℃, whereas Zr3Fe dissolved at 780℃ and Zr(CrFe)2 at 814℃. No precipitates were observed at a temperature higher than 900℃. The transformation-start temperature of α-Zr → β-Zr was reconfirmed to be 780℃, and the end temperature of α-Zr →βZr was determined to be 955℃. The dilation result also revealed that the martensitic transformation-start temperature, Ms, and the finish temperature, Mf, of this alloy were 741℃ and 645℃, respectively.
文摘The microstructural evolution and phase transformations of mechanically stirred non-dendritic ZA27 alloy during partial remelting were studied by using scanning electron microscopy and X-ray diffraction technique.The partial remelting temperature was 460℃ and lower than the stirring temperature of 465℃.So the microstructure with globular grains needed for semi-solid forming can not be obtained and the starting primary non-dendritic grains change in turn to connect non-dendritic grains, long chain-like structures and finally to coarsen connect grains.However,the small near-equiaxed grains between the primary non-dendritic grains are evolved into small globular grains gradually,some of which are also attached to the primary non-dendritic grains during the subsequent heating.The X-ray diffraction results show that a series of phase transformations, α+η+ε→β,η+β→L,β→α′+L,α+η+ε→α′ and α′→L, occur successively during this process.The main reason why the starting primary non-dendritic grains do not separate into the needed independent globular grains is that the reactions of η+β→L and α′→L do not occur or occurr incompletely in the layers used to connect the primary non-dendritic grains.
文摘The effects of shock loading on the morphology,grain growth during heating and phase transforma- tion of ZrO_2 have been investigated.It is shown that shock loading may be efficiently used to modify submicron ceramic powders with nanocrystalline structure.After shock loading,the critical diameter of ZrO_2 particles transformed from tetragonal to monoclinic decreased due to stored strain energy. Annealing of powders resulted in reversible transformation to the tetragonal without considerable grain growth up to 1200℃.
文摘The effect of prior microstructure on the kinetics of the α- β phase transformation in Zr-1.14 wt%Cr 0.08 wt%Fe alloy was studied. Specimens of different metallurgical histories and hence microstructures were prepared. Thermoelectric power (TEP) measurements and optical metallographt wereused to examine the transformations produced in these three kinds of specimens when they were reheated totemperatures 800~100℃ at different heating rates (slow and fast). The results indicate that the kinetics ofthe α-βphase transformation is strongly influenced by the metallurgical history of specimens. The presenceof nonequilibnum structures accelerates the phase transformation in the alloy and decreases the x-β transfor-mation temperature from 950℃ to 870℃. The influence of experimental conditions on the transformationkinetics is more complicated than that of metallurgical history. For an heated and as-received specimens, theα-βtransformation kinetics of the fast-heated specimens is slower than for the slow-heated specimens. How-ever. in the quenched specimens, the transformation kinetics of slow-heated specimens is greater than in fastheated specimens. This behaviour may be related to the size and shape of the Zr(CrFe)_2 precipitates andthe homogenization of the matrix.
基金This work was financially supported by the National Natural Science Foundation of China(Grant Nos.:11504149,51661020)thc Natural Scicnce Toundation of Gansu Province of China(Grant No:18JR3RA147).
文摘A new continuous multi-phase transformation field model was established for liquid-solid-eutectoid transformation. Taking Fe-C alloy as an example, the model was used to simulate the evolution of the micro-morphology of the liquid-solid phase transition, and the effects of temperature, solute and free energy on the nucleation of pearlite after the liquid-solid phase transition were analyzed. The micro-morphology of pearlite was simulated. The simulation results show that the austenite structure has hereditary effect on the pearlite, the morphology of pearlite structure was similar to that of the parent austenite. The eutectoid structure at the front of pearlite grows toward the interior of austenite grains in a bifurcation manner and in the spherical coronal shape. In addition, the growth rate of pearlite was related to the shape of concave-convex interface at the nucleation site, and the growth rate at the convex interface was faster than that at the concave interface.
基金the National Natural Science Foundation of China(Nos.52101026 and 52222507)the Natural Science Foundation of Zhejiang Province(No.LQ20E010004)+2 种基金the“Pioneer”and“Leading Goose”R&D Program of Zhejiang(No.2022C01017)the National Natural Science Foundation of China(52101108)the Ningbo 3315 Innovation Team(Nos.2019A-18-C and 2020A-03-C)is gratefully acknowledged.
文摘Rare-earth(RE)elements,known as“industrial vitamins”,have permeated modern lives,especially in high-tech applications.Although the RE elements possess close chemical similarities and have been treated as“one element”in the periodic table,their characteristics differ from each other.The RE microalloying effect is the crux to ameliorate the physicomechanical and thermochemical properties of materials,thereby the study of RE-related phase diagrams becomes indispensable to the design and optimization of RE-containing materials.However,in reality,the knowledge base in this area is considerably scarce compared with that of other commonly-used elements.In this work,the phase equilibria,phase diagrams,phase transformations,and some recent examples of RE-containing materials design are summarized,with which one can predict the RE solubilities,the RE precipitates,as well as the corresponding service behaviors.The attainment of enhanced materials’properties suggests that the thermodynamic rules extracted from the phase diagrams could serve as fundamental criteria for the successful development of novel RE-containing materials.
基金This work was supported by the National Natural Science Foundation of China(Grant No.52101059)the Shenyang National Laboratory for Materials Science(Grant No.L2019F48).
文摘Effects of solute rare earth(RE)on continuous cooling transformation of a low-alloy Cr–Mo–V bainitic steel are investigated in detail by dilatometry,optical microscopy(OM),scanning electron microscopy(SEM)and transmission electron microscopy(TEM).Microstructures appeared in thermal dilatometric samples of both low-alloy Cr–Mo–V(RE)steels are composed of quasi-polygonal ferrite(QPF),degenerate pearlite(DP),granular bainite(GB),lath bainite(LB),and martensite(M)depending on cooling rate.When cooling rate is lower than 2°C/s,the addition of RE suppresses QPF transformation,and thereby inducing a broader transformation region of GB.When cooling rate ranges from 2 to 100°C/s,the addition of RE decreases the start temperature of bainitic transformation distinctly,which results in finer bainitic ferrite grain size and higher dislocation density.The addition of RE can enhance the hardness of the low alloy Cr–Mo–V steel by affecting the aforementioned diffusional and/or partly displacive transformation.However,when cooling rate increases up to 150°C/s,two steels have the same hardness value of about 435 HV due to only martensite obtained by displacive transformation.
基金financially supported by the National Key Research and Development Program of China (No.2023YFC2909000)the National Natural Science Foundation of China(No.52174240)the Open Foundation of State Key Laboratory of Mineral Processing (No.BGRIMM-KJSKL-2023-15)。
文摘The mechanism involved in the phase transformation process of pyrolusite (MnO_(2)) during roasting in a reducing atmosphere was systematically elucidated in this study,with the aim of effectively using low-grade complex manganese ore resources.According to single-factor experiment results,the roasted product with a divalent manganese (Mn^(2+)) distribution rate of 95.30% was obtained at a roasting time of 25 min,a roasting temperature of 700℃,a CO concentration of 20at%,and a total gas volume of 500 mL·min^(-1),in which the manganese was mainly in the form of manganosite (MnO).Scanning electron microscopy and Brunauer–Emmett–Teller theory demonstrated the microstructural evolution of the roasted product and the gradual reduction in the pyrolusite ore from the surface to the core Thermodynamic calculations,X-ray photoelectron spectroscopy,and X-ray diffractometry analyses determined that the phase transformation of pyrolusite followed the order of MnO_(2)→Mn_(2)O_(3)→Mn_(3)O_(4)→MnO phase by phase,and the reduction of manganese oxides in each valence state proceeded simultaneously.
基金supported by the National Natural Science Foundation of China (Grant No.12072331)the Science Challenge Project (Grant No.TZ2018001)+2 种基金the Japan Society for the Promotion of Science (Grant Nos.17H04820 and 21H01677)the Foundation of the United Laboratory of High-Pressure Physics and Earthquake Scienceperformed under the approval of the Photon Factory Program Advisory Committee (Proposal Nos.2016S2-006 and 2020G680)。
文摘A time-resolved x-ray diffraction technique is employed to monitor the structural transformation of laser-shocked bismuth.Results reveal a retarded transformation from the shock-induced Bi-Ⅴphase to a metastable Bi-Ⅳphase during the shock release,instead of the thermodynamically stable Bi-Ⅲphase.The emergence of the metastable Bi-Ⅳphase is understood by the competitive interplay between two transformation pathways towards the Bi-Ⅳand Bi-Ⅲ,respectively.The former is more rapid than the latter because the Bi-Ⅴto B-Ⅳtransformation is driven by interaction between the closest atoms while the Bi-Ⅴto B-Ⅲtransformation requires interaction between the second-closest atoms.The nucleation time for the Bi-Ⅴto Bi-Ⅳtransformation is determined to be 5.1±0.9 ns according to a classical nucleation model.This observation demonstrates the importance of the formation of the transient metastable phases,which can change the phase transformation pathway in a dynamic process.
基金This work was financially supported by the Fundamental Research Funds for the Central Universities(No.2017QNA04)Qing-Kun Meng thanks Prof.Yu-Chen Karen Chen-Wiegart at Stony Brook University and Dr.Jian-Ming Bai,Dr.Hui Zhong and Dr.Sanjit Ghose at National Synchrotron Light Source II for their assistance in the synchrotron experiments.This research used 28-ID-2(XPD)beamline of the National Synchrotron Light Source II,a U.S.Department of Energy(DOE)Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under Contract No.DE-SC0012704.
文摘Various solid state phase transformations exist in metastable β-type Ti alloys,which can be employed to optimize the mechanical properties.In this paper,synchrotron X-ray diffraction(SXRD)experiments were carried out to study the phase transformations of a Ti36Nb5Zr alloy subjected to different thermomechanical treatments.Furthermore,the correlation between the phase constitutions and the mechanical properties was discussed.The a" texture formed,and high-density defects were introduced after cold rolling of the solution treated specimen,leading to the decrease in Young’s modulus and the increase in strength.The cold-rolled specimens were then annealed at temperatures from 423 to 773 K for 30 min.Both the Young’s modulus and strength increased with annealing temperatures increasing up to 673 K,which resulted from the precipitation of the ω and/or α phases.With further increase in annealing temperatures to 773 K,the β→α precipitation replaced the β→ω_(iso) phase transformation,and the density of defects decreased,leading to the decrease in both the Young’s modulus and strength.These results provide theoretical basis for the design biomedical Ti alloys with both low Young’s modulus and high strength.
基金supported by the National High Technology Research and Development Program of China (Grant N. 2006AA09A209-7)the Major Oil and Gas Program of China (Grant No. 2008ZX05026-04-011)+1 种基金Knowledge Innovative Program of the Chinese Academy of Sciences (Grant No. KJCX2-YW-L02)the National Natural Science Foundation of China (Grant No. 1077218)
文摘Thermally induced evolution of phase transformations is a basic physical-chemical process in the dissociation of gas hydrate in sediment (GHS). Heat transfer leads to the weakening of the bed soil and the simultaneous establishment of a time varying stress field accompanied by seepage of fluids and deformation of the soil. As a consequence, ground failure could occur causing engineering damage or/and environmental disaster. This paper presents a simplified analysis of the thermal process by assuming that thermal conduction can be decoupled from the flow and deformation process. It is further assumed that phase transformations take place instantaneously. Analytical and numerical results are given for several examples of simplified geometry. Experiments using Tetra-hydro-furan hydrate sediments were carried out in our laboratory to check the theory. By comparison, the theoretical, numerical and experimental results on the evolution of dissociation fronts and temperature in the sediment are found to be in good agreement.
基金supported by the Open-Fund Research of State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Chinathe Fundamental Research Funds for Central University (No. CDJZR12130036)
文摘A computational approach based on the thermal elastic plastic finite element method was developed for predicting welding residual stress in low carbon alloyed steel welds by taking into account the effect of the solid-state phase transformations. The kinetics of phase transformations was described by Johnson Mehl Avrami Kolmogrov (JMAK) equation for bainitic transition and by Koistinen-Marburger (K-M) relationship for martensitic transition. Moreover, an additive rule depending on volumetric phase fraction was adopted to represent the material property changes during heating and cooling. Consequently, the residual welding stresses in a 2.25Cr1Mo steel TIG welded plate were computed. Early calculation results suggest that the bainitic and martensitic transformations took place in the weld the heat-affected zone drastically reduce the residual longitudinal tensile stress in the region.
基金financially supported by the Fundamental Research Funds for the Central Universities (No.2017QNA04)。
文摘The phase transformations during thermomechanical processing can be employed to optimize mechanical properties of β-type Ti alloys.However,such understandings are still lacking for the alloy consisting of dual β+α" phases in solution-treated and quenched state.In this paper,the phase transformations in a Ti38 Nb model alloy subjected to different thermomechanical processing were investigated by using synchrotron X-ray diffraction(SXRD) experiments,and their influence on the Young’s modulus was discussed.The results indicated that highdensity dislocations introduced by cold rolling still existed after annealing at temperatures lower than 573 K,which can decrease the martensitic transformation start temperature to below room temperature.With annealing temperatures increasing,the α"→β,β→ω_(iso),and β→α phase transformations occurred successively.At annealing temperature of 473 K,the specimen consisted of a trace of α"and ω phases as well as dominant β phase which was kept to room temperature by the high density of dislocations,rather than by the chemical stabilization.As a result,an ultralow Young’s modulus of 25.9 GPa was realized.Our investigation not only provides in-depth understandings of the phase transformations during thermomechanical processing of β-type Ti alloys,but also sheds light on designing biomedical Ti alloys with ultralow Young’s modulus.
基金supported by the National Natural Science Foundation of China(No.51690164)the fund of National Key Laboratory for Precision Hot Processing of Metals(6142909200104)+2 种基金National Training Program of Innovation and Entrepreneurship for Undergraduates(S202010699137)the Fundamental Research Funds for the Central Universitiesthe support of the LNCMI-CNRS。
文摘While there have been multiple recent reports in the literature focusing on the effects of magnetic field on the phase transformation behaviors,the research conducted with an ultra-high magnetic field greater than 20 T is still preliminary.In the current study,the structure evolution of Co-B alloys are experimentally studied with undercooling.The effects of a 25 T magnetic field on the solidification behavior and the subsequent solid-state phase transformation behavior have been investigated.The 25 T magnetic field is confirmed to have little effect on the homogeneous nucleation,but have some influence on the heterogeneous nucleation of Co_(3) B and Co_(23)B6 phases by modifying the wetting angleθ.The decomposition of Co_(23)B6 phase in the subsequent cooling process can be effectively suppressed by applying the 25 T magnetic field.The present work might be helpful for not only theoretically understanding the influence of ultra-high magnetic field on the phase transformation behaviors but a potential technology of field-manipulation of magnetic materials.
基金sponsored by the Helmholtz Association,the China Scholarship Council(CSC)partially funded by the German Research Foundation,DFG(Project No.MA 5039/4-1)。
文摘Tin(Sn)holds great promise as an anode material for next-generation lithium(Li)ion batteries but suffers from massive volume change and poor cycling performance.To clarify the dynamic chemical and microstructural evolution of Sn anode during lithiation and delithiation,synchrotron X-ray energydispersive diffraction and X-ray tomography are simultaneously employed during Li/Sn cell operation.The intermediate Li-Sn alloy phases during de/lithiation are identified,and their dynamic phase transformation is unraveled which is further correlated with the volume variation of the Sn at particle-and electrode-level.Moreover,we find that the Sn particle expansion/shrinkage induced particle displacement is anisotropic:the displacement perpendicular to the electrode surface(z-axis)is more pronounced compared to the directions(x-and y-axis)along the electrode surface.This anisotropic particle displacement leads to an anisotropic volume variation at the electrode level and eventually generates a net electrode expansion towards the separator after cycling,which could be one of the root causes of mechanical detachment and delamination of electrodes during long-term operation.The unraveled chemical evolution of Li-Sn and deep insights into the microstructural evolution of Sn anode provided here could guide future design and engineering of Sn and other alloy anodes for high energy density Li-and Na-ion batteries.
基金supported by the National Key Research and Development Project (2018YFB1307902)Shanxi Province Joint Student Training Base Talent Training Project(No.2018JD33)+5 种基金Shanxi young top talent projectShanxi Province Science Foundation for Youths (201901D211312)Excellent young academic leaders in Shanxi colleges and universities(No.2019045)Excellent Achievements Cultivation Project of Shanxi Higher Education Institutions(No.2019KJ028)Shanxi Province emerging industry leader talent projectShanxi Graduate Education Innovation Project(No.2019SY482)。
文摘To explore the effect of temperature on the phase transformation of HCP→FCC during compression, the uniaxial compression process of AZ31 magnesium alloy was simulated by the molecular dynamics method, and the changes of crystal structure and dislocation evolution were observed. The effects of temperature on mechanical properties, crystal structure, and dislocation evolution of magnesium alloy during compression were analyzed. It is concluded that some of the Shockley partial dislocation is related to FCC stacking faults. With the help of TEM characterization, the correctness of the correlation between some of the dislocations and FCC stacking faults is verified. Through the combination of simulation and experiment, this paper provides an idea for the in-depth study of the solid-phase transformation of magnesium alloys and provides reference and guidance for the design of magnesium alloys with good plasticity and formability at room temperature.
文摘The effects of Nb addition,individually and in combination with Ti,were evaluated over a range of coiling temperatures.Coiling temperature influences the ratio of soluble and precipitated Nb in the hot rolled steel containing 0.08 % C and 2.2 % Mn.Nb bearing precipitates can co-precipitate on TiN and impact the microstructure and mechanical properties of the steel after annealing treatment.Microstructure characterization revealed that recovery and recrystallization processes preceded austenite formation.The effects of Nb on austenite formation in cold rolled steels during heating and isothermal holding and on austenite decomposition during subsequent cooling were investigated using dilatometry.The addition of Nb retarded ferrite recrystallization starting temperature,but had no significant effect on the starting temperature of austenite formation during heating.The Nb addition also accelerated austenite formation once the transformation started,and was beneficial for the formation of a finer and homogeneous microstructure.