Mechanism of phosphorus removal in beneficiation of high phosphorous oolitic hematite by direct reduction roasting with dephosphorization agent

High phosphorous oolitic hematite ore is one of typical intractable iron ores in China, and the conventional beneficiation methods are found to be impracticable to , remove phosphorus from the ore effectively. Better beneficiation index were gotten by direct reduction roasting with dephosphorization agent followed by two stages of grinding and magnetic separation. P content decreases from 0.82% in the raw ore to 0.06% in the magnetic concentrate, and the total iron grade increases from 43.65% to 90.23%, the recovery of iron can reach 87%. Mechanisms of phosphorus removal in the beneficiation of high phosphorous oolitic hematite ore by direct reduction roasting with dephosphorization agent were studied using XRD, SEM and EPMA. The results showed that about 20% of the apatite in the raw ore transferred into phosphorus and volatilized with the gas in the process of reduction roasting, while the rest 80% apatite was not involved in the reaction of generation of phosphorus, and remained as apatite in the roasted products, which was removed to tailings by grinding and magnetic separation. A small amount of phosphorus existed in the magnetic concentrate as apatite. The oolitic texture of raw ore was partly changed during roasting, resulting in the formation of nepheline in the reaction between the dephosphorization agent, SiO2 and Al2O3 in the raw ore, which greatly improved the liberation degree of minerals in the roasted products, and it was beneficial to the subsequent grinding and magnetic separation.

Achieving broadband near-infrared luminescence in Cr^(3+)-Activated Y_(2)Mg_(2)Al_(2)Si_(2)O_(12)phosphors via multi-site occupancy

Cr^(3+)-activated near-infrared(NIR)phosphors are key for NIR phosphor-converted light emitting diodes(NIR pc-LED).While,the site occupancy of Cr^(3+)is one of the debates that have plagued researchers.Herein,Y2Mg2Al2-Si_(2)O1_(2)(YMAS)with multiple cationic sites is chosen as host of Cr^(3+)to synthesize YMAS:xCr^(3+)phosphors.In YMAS,Cr^(3+)ions occupy simultaneously Al/SiO4 tetrahedral,Mg/AlO6 octahedral,and Y/MgO8 dodecahedral sites which form three luminescent centers named as Cr1,Cr2,and Cr3,respectively.Cr1 and Cr2 relate to an intermediate crystal field,with transitions of^(2)E→^(4)A_(2)and^(4)T_(2)→^(4)A_(2)occurring simultaneously.As Cr^(3+)concentration increases,the^(4)T_(2)→^(4)A_(2)transition becomes more pronounced in Cr1 and Cr2,resulting in a red-shift and broadband emission.Cr3 consistently behaves a weak crystal field and exhibits the broad and long-wavelength emission.Wide-range NIR emission centering at 745 nm is realized in YMAS:0.03Cr^(3+)phosphor.This phosphor has high internal quantum efficiency(IQE?86%)and satisfying luminescence thermal stability(I423 K?70.2%).Using this phosphor,NIR pc-LEDs with 56.6 mW@320 mA optical output power is packaged and applied.Present study not only demonstrates the Cr^(3+)multi-site occupancy in a certain oxide but also provides a reliable approach via choosing a host with diverse cationic sites and local environments for Cr^(3+)to achieve broadband NIR phosphors.

Pillar effect induced by ultrahigh phosphorous/nitrogen doping enables graphene/MXene film with excellent cycling stability for alkali metal ion storage

Graphene's large theoretical surface area and high conductivity make it an attractive anode material for potassium-ion batteries(PIBs).However,its practical application is hindered by small interlayer distance and long ion transfer distance.Herein,this paper aims to address the issue by introducing MXene through a simple and scalable method for assembling graphene and realizing ultrahigh P doping content.The findings reveal that MXene and P-C bonds have a "pillar effect" on the structure of graphene,and the P-C bond plays a primary role.In addition,N/P co-doping introduces abundant defects,providing more active sites for K^(+) storage and facilitating K^(+) adsorption.As expected,the developed ultrahigh phosphorous/nitrogen co-doped flexible reduced graphene oxide/MXene(NPrGM) electrode exhibits remarkable reversible discharge capacity(554 mA hg^(-1) at 0.05 A g^(-1)),impressive rate capability(178 mA h g^(-1) at 2 A g^(-1)),and robust cyclic stability(0.0005% decay per cycle after 10,000 cycles at 2 A g^(-1)).Furthermore,the assembled activated carbon‖NPrGM potassium-ion hybrid capacitor(PIHC) can deliver an impressive energy density of 131 W h kg^(-1) and stable cycling performance with 98.1% capacitance retention after5000 cycles at 1 A g^(-1).Such a new strategy will effectively promote the practical application of graphene materials in PIBs/PIHCs and open new avenues for the scalable development of flexible films based on two-dimensional materials for potential applications in energy storage,thermal interface,and electromagnetic shielding.

Structural and Luminescent Properties of Mg_(0.25-x)Al_(2.57)O_(3.79)N_(0.21):xMn^(2+)Green-Emitting Transparent Ceramic Phosphor

A series of spinel-type Mg_(0.25-x)Al_(2.57)O_(3.79)N_(0.21):xMn^(2+)(MgAlON:xMn^(2+))phosphors were synthesized by the solid-state reaction route.The transparent ceramic phosphors were fabricated by pressureless sintering followed by hot-isostatic pressing(HIP).The crystal structure,luminescence and mechanical properties of the samples were systematically investigated.The transparent ceramic phosphors with tetrahedrally coordinated Mn^(2+)show strong green emission centered around 515 nm under blue light excitation.As the Mn^(2+)concentration increases,the crystal lattice expands slightly,resulting in a variation of crystal field and a slight red-shift of green emission peak.Six weak absorption peaks in the transmittance spectra originate from the spin-forbidden ^(4)T_(1)(^(4)G)→^(6)A_(1) transition of Mn^(2+).The decay time was found to decrease from 5.66 to 5.16 ms with the Mn^(2+)concentration.The present study contributes to the systematic understanding of crystal structure and properties of MgAlON:xMn^(2+)green-emitting transparent ceramic phosphor which has a potential application in high-power light-emitting diodes.

Properties of Self-recoverable Mechanoluminescence Phosphor Ca_(5)Ga_(6)O_(14)∶Eu^(3+) and Its Information Encryption Application

A novel self-recoverable mechanoluminescent phosphor Ca_(5)Ga_(6)O_(14)∶Eu^(3+) was developed by the high-tem-perature solid-state reaction method,and its luminescence properties were investigated.Ca_(5)Ga_(6)O_(14)∶Eu^(3+)can produce red mechanoluminescence,and importantly,it shows good repeatability.The mechanoluminescence of Ca_(5)Ga_(6)O_(14)∶Eu^(3+) results from the piezoelectric field generated inside the material under stress,rather than the charge carriers stored in the traps,which can be confirmed by the multiple cycles of mechanoluminescence tests and heat treatment tests.The mechanoluminescence color can be turned from red to green by co-doping varied concentrations of Tb^(3+),which may be meaningful for encrypted letter writing.The encryption scheme for secure communication was devised by harnessing mechanoluminescence patterns in diverse shapes and ASCII codes,which shows good encryption performance.The results suggest that the mechanoluminescence phosphor Ca_(5)Ga_(6)O_(14)∶Eu^(3+),Tb^(3+)may be applied to the optical information encryption.

Dancing bubble sonoluminescence in phosphoric acid solution

Sonoluminescence is more distinctly observed in phosphoric and sulfuric acid,which exhibit high viscosity and lower vapor pressures relative to water.Within an 85-wt%phosphoric acid solution saturated with argon(Ar),variations in the light-emitting regimes of bubbles were noted to correspond with increments in the driving acoustic intensity.Specifically,the bubbles were observed to perform a dance-like motion 2 cm below the multi-bubble sonoluminescence(MBSL)cluster,traversing a 25-mm^(2) grid during the camera exposure period.Spectral analysis conducted at the beginning of the experiment showed a gradual attenuation of CN(B^(2)Σ–X^(2)Σ)emission concurrent with a strengthening of Ar(4p–4s)atom emission lines.The application of a theoretical temperature model to the spectral data revealed that the internal temperature of the bubbles escalates swiftly upon their implosion.This study is instrumental in advancing the comprehension of the underlying mechanisms of sonoluminescence and in the formulation of a dynamic model for the behavior of the bubbles.

Achieving Narrowed Bandgaps and Blue-Light Excitability in Zero-Dimensional Hybrid Metal Halide Phosphors via Introducing Cation-Cation Bonding

Zero-dimensional(0D)hybrid metal halides,which consist of organic cations and isolated inorganic metal halide anions,have emerged as phosphors with efficient broadband emissions.However,these materials generally have too wide bandgaps and thus cannot be excited by blue light,which hinders their applications for efficient white light-emitting diodes(WLEDs).The key to achieving a blue-light-excitable 0D hybrid metal halide phosphor is to reduce the fundamental bandgap by rational chemical design.In this work,we report two designed hybrid copper(I)iodides,(Ph_(3)MeP)_(2)Cu_(4)I_(6)and(Cy_(3)MeP)_(2)Cu_(4)I_(6),as blue-light-excitable yellow phosphors with ultrabroadband emission.In these compounds,the[Cu_(4)I_(6)]^(2-)anion forms an I6 octahedron centered on a cationic Cu_(4)tetrahedron.The strong cation-cation bonding within the unique cationic Cu_(4)tetrahedra enables significantly lowered conduction band minimums and thus narrowed bandgaps,as compared to other reported hybrid copper(I)iodides.The ultrabroadband emission is attributed to the coexistence of free and self-trapped excitons.The WLED using the[Cu_(4)I_(6)]^(2-)anion-based single phosphor shows warm white light emission,with a high luminous efficiency of 65 Im W^(-1)and a high color rendering index of 88.This work provides strategies to design narrow-bandgap 0D hybrid metal halides and presents two first examples of blue-light-excitable 0D hybrid metal halide phosphors for efficient WLEDs.

Fabrication of YAG:Ce^(3+) and YAG:Ce^(3+),Sc^(3+) Phosphors by Spark Plasma Sintering Technique

In this study,a single-doped phosphors yttrium aluminum garnet(Y_(3)Al_(5)O_(12),YAG):Ce^(3+),single-doped YAG:Sc^(3+),and double-doped phosphors YAG:Ce^(3+),Sc^(3+) were prepared by spark plasma sintering(SPS)(lower than 1 200℃).The characteristics of synthesized phosphors were determined using scanning electron microscopy(SEM),X-ray diffraction(XRD),and fluorescence spectroscopy.During SPS,the lattice structure of YAG was maintained by the added Ce^(3+) and Sc^(3+).The emission wavelength of YAG:Ce^(3+) prepared from SPS(425-700 nm) was wider compared to that of YAG:Ce^(3+) prepared from high-temperature solid-state reaction(HSSR)(500-700 nm).The incorporation of low-dose Sc^(3+) in YAG:Ce^(3+) moved the emission peak towards the short wavelength.

Durable hierarchical phosphorus‐doped biphase MoS_(2)electrocatalysts with enhanced H^(*)adsorption

Phase engineering is an efficient strategy for enhancing the kinetics of electrocatalytic reactions.Herein,phase engineering was employed to prepare high‐performance phosphorous‐doped biphase(1T/2H)MoS_(2)(P‐BMS)nanoflakes for hydrogen evolution reaction(HER).The doping of MoS_(2)with P atoms modifies its electronic structure and optimizes its electrocatalytic reaction kinetics,which significantly enhances its electrical conductivity and structural stability,which are verified by various characterization tools,including X‐ray photoelectron spectroscopy,high‐resolution transmission electron microscopy,X‐ray absorption near‐edge spectroscopy,and extended X‐ray absorption fine structure.Moreover,the hierarchically formed flakes of P‐BMS provide numerous catalytic surface‐active sites,which remarkably enhance its HER activity.The optimized P‐BMS electrocatalysts exhibit low overpotentials(60 and 72 mV at 10 mA cm^(−2))in H_(2)SO_(4)(0.5 M)and KOH(1.0 M),respectively.The mechanism of improving the HER activity of the material was systematically studied using density functional theory calculations and various electrochemical characterization techniques.This study has shown that phase engineering is a promising strategy for enhancing the H*adsorption of metal sulfides.

The KEu(WO_(4))_(2)Red Phosphor Co-doped with Li^(+)and SO_(4)^(2-)for Synergistic Enhancement of High Efficiency and Thermal Stability

A series of tungstate red phosphors K_(1-x)Li_(x)Eu(WO_(4))_(2-y)(SO_(4))_(y)were successfully prepared by sol-gel method,and the effects of the introduction of Li^(+)and SO_(4)^(2-)on the fluorescence intensity and thermal quenching properties of the prepared K_(1-x)Li_(x)Eu(WO_(4))_(2-y)(SO_(4))_(y)phosphors were investigated.The X-ray diffraction data show that the prepared(Li^(+)and SO_(4)^(2-))-doped KEu(WO_(4))_(2)phosphors have a monoclinic tetragonal structure.In addition,the emission intensities of all the observed emission peaks change significantly with the increase of Li~+doping concentration,especially the intensity of the emission peaks at 615 nm fluctuated significantly and reached the maximum at x=0.3 and y=0.2.The K_(1-x)Li_(x)Eu(WO_(4))_(2-y)(SO_(4))_(y)phosphors are found to have the highest fluorescence intensity at x=0.3 and y=0.2.Moreover,the K_(0.7)Li_(0.3)Eu(WO_(4))_(1.8)(SO_(4))_(0.2)phosphor has better thermal quenching properties and luminescence efficiency,and the experimental results indicates that the fluorescence intensity and thermal burst performance of KEu(WO_(4))_(2)red phosphor could be effectively improved by using low-cost bionic doping of Li^(+)and SO_(4)^(2-).

Synthesis and Luminescence Improvement of CaAlSiN_(3) Phosphors Doped with Eu^(2+) and Mn^(2+) for White LEDs

Eu^(2+) and Mn^(2+) co-activated CaAlSiN_(3) red phosphors were produced using the solid-state reaction tech⁃nique in a N2 environment.Excitation spectra,emission spectra,and diffuse reflection spectra were used to study the luminescence characteristics,energy gap,and thermal stability in detail.CaAlSiN_(3)∶Eu^(2+) exhibits an extended emission band when stimulated with 450 nm blue light,which is caused by the 4f65d to 4f7 transition of Eu^(2+).Similar⁃ly,CaAlSiN_(3)∶Mn^(2+) displays a wide emission band centered at 628 nm,which results from Mn^(2+)’s transition from 4T1(4G) to 6A1(6S).When the ions of Mn^(2+)were combined into CaAlSiN_(3)∶Eu^(2+),the photoluminescence intensity of Eu^(2+ )was greatly boosted because there was energy transfer and co-emission between Mn^(2+) and Eu^(2+).Beyond that,CaAlSiN_(3)∶Eu^(2+),Mn^(2+) emerges with splendid thermostability and high quantum efficiency,the quenching temperature surpasses 300℃,and the internal quantum efficiency is determined to be around 84.9%.The white LED was pack⁃aged with a combination of CaAlSiN_(3)∶Eu^(2+),Mn^(2+),LuAG∶Ce3+ and a blue chip.At a warm white-light corresponding color temperature(3009 K) with CIE coordinates(0.4223,0.3748),the color rendering index Ra has reached 93.2.CaAlSiN_(3)∶Eu^(2+),Mn^(2+) would have great application potential as a red-emitting phosphor for white LEDs.

Suppressing neuroinflammation using the near-infrared light emitted by (Sr,Ba)Ga_(12)O_(19): Cr^(3+) phosphor

Neurodegenerative diseases,such as Parkinson’s and Alzheimer’s diseases,affect the elderly worldwide and will become more prevalent as the global population ages.Neuroinflammation is a common characteristic of neurodegenerative diseases.By regulating the phenotypes of microglia,it is possible to suppress neuroinflammation and,in turn,help prevent neurodegenerative diseases.We report a noninvasive photonic approach to regulating microglia from overexcited M1/M2 to the resting M0 phenotype using a special near-infrared(NIR)light emitted by the SrGa_(12)O_(19)∶Cr^(3t) phosphor.The absorbance and internal and external quantum efficiencies of the optimal SreGa_(0.99)Cr_(0.01)_(12)O_(19) phosphor synthesized at 1400℃ for 8 h using 1%H_(3)BO_(3) t 1%AlF3 as flux are 53.9%,99.2%,and 53.5%;the output power and energyconversion efficiency of the LED device packaged using the optimal SrGa_(12)O_(19): Cr^(3+) phosphor driven at 20 mA reach unprecedentedly 19.69 mW and 37.58%,respectively.The broadband emission of the NIR LED device covers the absorption peaks of cytochrome c oxidase well,and the NIR light can efficiently promote the proliferation of microglia,produce adenosine triphosphate(ATP),reverse overexcitation,alleviate and inhibit inflammation,and improve cell survival rate and activity,showing great prospects for photomedicine application.

Effect of Phosphorus on the Content of Vitamin E in Different Soybean Cultivars

[Objective] This study aimed to explore the effects of phosphorus on the contents of vitamin E in different cultivars of soybean grains and find the optimum application amount of phosphorus for different genotypes of soybean cultivars,in order to increase the contents of vitamin E in soybean grains and improve the qualities.[Method] Three soybean cultivars were selected as experimental materials,including Heinong 48（high-protein cultivar）,Heinong 37（intermediate cultivar） and Heinong 44（high-oil cultivar）.The soybeans were planted in pots,with 0.033 g/kg soil of N and K2O,four phosphorus treatments were set,respectively applied with 0（P1）,0.033（P2）,0.067（P3） and 0.100（P4） g/kg soil of P2O5,and the total contents of vitamin E in different cultivars of soybean grains were determined by high-performance liquid chromatography method.[Result] The total contents of vitamin E in the same cultivar of soybean grains in P3 treatment were significantly higher than that in the other three treatments,the total contents of vitamin E in Heinong 37,Heinong 44 and Heinong 48 in P3 treatment had increased by 11.96%,16.55% and 14.02%,compared with the control;among the three soybean cultivars in P2 treatment,the content of vitamin E in Heinong 37 was the maximum;among the 12 treatment combinations,the total contents of vitamin E in Heinong 44 in P3 treatment was the maximum.The contents of vitamin E in three soybean cultivars significantly varied among the various cultivars and different phosphorus treatments.[Conclusion] Application of phosphorus could affect the contents of vitamin E in three soybean cultivars,appropriate application amount of phosphorus is advantageous to improve the contents of vitamin E in soybean grains.

Luminescent properties of Lu_2MoO_6:Eu^(3+) red phosphor for solid state lighting

The Eu^3＋ activated Lu2MoO6 phosphors were synthesized by high-temperature solid-state reaction method. The X-ray diffraction （XRD）, excitation spectra, emission spectra and decay lifetime of the phosphors were measured to characterize the structure and luminescent properties. The XRD results show that all the prepared phosphors can be assigned to the monoclinic structure. The experimental results indicate efficient absorption of near ultraviolet light from the Mo^6＋O^2- group followed by intensive emission in the visible spectral range. The optimal content of Eu3＋ is 10% （mole fraction）. The critical distance Rc and energy transfer mechanism were also discussed in detail. This red emitting material may be applied as a promising red phosphor for the near ultraviolet excited white light emitting diodes.

Influence of Sediment Dredging on Chemical Forms and Release of Phosphorus

A laboratory experiment was carried out through a six-month incubation of undredged （control） and dredged cores to study the effect of sediment dredging on phosphorus （P） release from the sediment in the Taihu Lake. During the experiment, dredging the upper 30 cm layer could efficiently reduce the interstitial PO4^3-P concentration and different P forms in the sediment. The P fluxes of the undredged and dredged cores ranged from -5.1 to 3047.6 and -60.7 to 14.4μg·m^-2·d^-1, respectively. The fluxes of the dredged cores were generally lower than those of the control. Differences in the fluxes between the dredged and undredged cores were statistically significant （P 〈 0.05） from March to June 2006. The sediment P in the dredged cores had a lower release potential than that in the control. Dredging can be considered as a useful measure for rehabilitating the aquatic ecosystem after the external P loading in the Talhu Lake catchment was efficiently reduced.

Luminescence and Preparation of LED Phosphor Ca_8Mg(SiO_4)_4Cl_2∶Eu^(2+)

Calcium magnesium chlorosilicate doped by europium, Ca8Mg（SiO4）4Cl2： Eu^2＋, was prepared by the solid state reaction at high temperature. The compound obtained is pure Ca8Mg（SiO4）4Cl2 phase with cubic structure. Its average particle size is 5 μm, and it has good dispersity and morphological form. The excitation spectrum of Ca8Mg（SiO4）4Cl2： Eu^2＋ is a wide band, which covers from 270 to 480 nm. The emission spectrum is also a wide band peaked at 510 nm. The luminescent intensity reaches to the maximum when the concentration of Eu^2 ＋ is 2%. The wavelength of emission and excitation of the phosphor with various Eu^2 ＋ contents keeps constant. This spectrum range matches violet and blue LED chips very well, and its strong luminescence intensity is suitable for a green phosphor of tricolor phosphor of white light LED.

Synergistic extraction of rare earth by mixtures of 2-ethylhexyl phosphoric acid mono-2-ethylhexyl ester and di-(2-ethylhexyl) phosphoric acid from sulfuric acid medium

The extraction of Nd^3＋ and Sm^3＋, including the extraction and stripping capability as well as the separation effect of Nd^3＋ or Sm^3＋, from a sulfuric acid medium, by mixtures of di-（2-ethylhexyl） phosphoric acid （HDEHP, H2A2（0）） and 2-ethylhexyl phosphoric acid mono-2-ethylhexyl ester （HEH/EHP, H2L2（0）） were studied. The distribution ratios and synergistic coefficients of Nd^3＋ and Sm^3＋ in different acidities were also determined. A synergistic extractive effect was found when HDEHP and HEH/EHP were used as mixed extractants for Sm^3＋ or Nd^3＋. The chemical compositions of the extracted complex were determined as Nd.（HA2）2-HL2 and Sm.（HA2）2-HL2. The extraction equilibrium constants, enthalpy change, and entropy change of the extraction reaction were also determined.

Phosphorus forms in sediments of the East China Sea and its environmental significance

By means of SEDEX, ASPILA and XRF, depth-dependent changes of different phosphorus forms in sediment cores from specific areas of the offshore Changjiang Estuary (Yangtze Estuary) in 1998 were analyzed. Results show that contents of total phosphorus (TP), organic-phosphorus (OP) and iron-phosphorus (Fe-P) decreased down-core, while those of absorbed-phosphorus (Ad-P) and calcium-phosphorus (Ca-P) increased. The distribution tendency of detritus-phosphorus (De-P) is not obvious. Results also show that TP, Fe-P and OP contents at Meso station of the Changjiang Estuary and Hangzhou Bay are higher than that of the other stations. This suggests that the pollutants carried by the Changjiang and the Qiantang rivers from inland have affected the natural environment in offshore area. TP, Fe-P and OP contents of each station become higher from bottom to top, indicating the amount of the terrestrial pollutants carried by the two rivers has been enhanced since the last 30-50 years. Ad-P, Ca-P, Fe-P and OP are all active phosphorus in sediments, and their re-cycling in sediment is closely related to each other.

Denitrifying phosphorous removal in anaerobic/anoxic SBR system with different startup operation mode

To achieve stable and efficient nitrogen and phosphorus removal and to investigate the characteristics of the A/A SBR enriched with denitrifying phosphorus removal bacteria(DPB),the whole course of startup was studied with two reactors operated in different mode.The reactor I was operated under anaerobic/settling/anoxic/settling mode,and the reactor II was operated under anaerobic/anoxic/settling mode.Differences between the two reactors in removal efficiency of COD,nitrogen and phosphorus were examined.The results indicated that efficient performance could be achieved in both reactors with different startup operation mode,while the phosphorus removal efficiency was improved sooner in reactor I than in reactor II,which suggested that reactor I would supply a more favorable condition for DPB proliferation.Meanwhile,it was observed that the amount of organic substrates consumption had a linear correlation to that of phosphorus release in anaerobic phase when DPB was accumulated in the A/A SBR denitrifying phosphorus removal system.

Investigations on Valence-Change Behaviors of Europium Ions in Eu-Doped Aluminate and Silicate Phosphors

Compounds of Sr3Al2O6 ： Eu, SrgAl14O25 ： Eu, and BaZnSiO4 ： Eu were synthesized by high-temperature solid state reactions. The doping Eu^3 ＋ ions were partially reduced to Eu^2＋ in Sr4Al14O25：Eu and BaZnSiOg：Eu prepared in an oxidizing atmosphere, N^2 ＋ O2. However, such an abnormal reduction process could not be performed in Sr3Al2O6：Eu, which was also prepared in an atmosphere of N^2 ＋ O2. Moreover, even though Sr3A1EO6：Eu was synthesized in a reducing condition CO, only part of the Eu^3 ＋ ions was reduced to Eu^2 ＋ . The existence of trivalent and divalent europium ions was confirmed by photoluminescent spectra. The different valence-change behaviors of europium ions in the hosts were attributed to the difference in host crystal structures. The higher the crystal structure stiffness, the easier the reduction process from Eu^3 ＋ to Eu^2 ＋ .