An efficient slagging is a key process to improve the dephosphorization ability in converter operation. The microstructure analyses can provide the information of phosphorus distribution in various mineral phases to f...An efficient slagging is a key process to improve the dephosphorization ability in converter operation. The microstructure analyses can provide the information of phosphorus distribution in various mineral phases to feature completely the dephosphorization process.Two kinds of converter slags were investigated in this study, including conventional slag with high basicity and dephosphorization slag with low basicity.The characteristics of high basicity converter slag have been reported widely.However,the investigations on the low basicity slag properties for dephosphorization in converter are less discussed in steelmaking slag system.This study focused on the microstructure and phosphorus-containing phases in converter slag.The slag composition and mineral phase were examined by the usual XRF chemical analysis and EPMA,XRD studies.The results indicated that the phosphorus-containing phase in high basicity slag was the dicalcium silicate(2CaO·SiO_2 or C_2S) phase,while phosphorus in low basicity slag was incorporated in CaFeSiO_4 structure.展开更多
The laboratory scale experiments for determining the influence on the distribution of phosphorus by.adding Al-containing component in melting furnace were conducted. It is found that the addition of Al-containing comp...The laboratory scale experiments for determining the influence on the distribution of phosphorus by.adding Al-containing component in melting furnace were conducted. It is found that the addition of Al-containing component in melting furnace increased the amount of phosphorus in slag phase. Thermodynamic analysis of the industrial sludge melting process with the addition of different Al-containing components was also carried out. The compositions of slag and the gas in three different zones in melting furnace were obtained. The results also demonstrate that increasing the mole ratio Al/P of charged materials is an effective way to fix more phosphorus in slap, which can help reduce the amount of H3PO4 precipitate from guy in the waste heat boiler later.展开更多
The distribution of the phosphorus(P) adsorption in a bed sediment at channel confluences is an important issue for understanding the transport of contaminants in channel networks. In this study, the flow structure ...The distribution of the phosphorus(P) adsorption in a bed sediment at channel confluences is an important issue for understanding the transport of contaminants in channel networks. In this study, the flow structure and its effect on the P distribution in the bed sediment were investigated in a 90° confluence flume. It is shown that the P adsorption amount in the sediment varies significantly in different hydrodynamic zones. The P adsorption amount is high in the flow separation zone where the horizontal velocity of the flow is very small, and it is low in the maximum velocity zone where the flow velocity reaches a maximum. The low P adsorption amount is observed in the downstream portion of the distorted shear layer, while the P enrichment is found in the upstream portion, as is related to the significant downwelling flow in this zone. Thus, the flow structure, especially, the flow velocity, has a significant effect on the distribution of the P adsorption in the bed sediment at the channel confluences.展开更多
Microwave(MW) hybrid processes are able to disrupt the flocculent structure of complex waste activated sludge,and help promote the recovery of phosphorus as struvite.In this study,to optimize struvite yield,(1) th...Microwave(MW) hybrid processes are able to disrupt the flocculent structure of complex waste activated sludge,and help promote the recovery of phosphorus as struvite.In this study,to optimize struvite yield,(1) the characteristics of matter released in MW-hybrid treatments were compared,including MW,MW-acid,MW-alkali,MW-H2O2,and MW-H2O2- alkali.The results showed that selective release of carbon,nitrogen,phosphorus,Ca^2+,and Mg^2+ achieved by sludge pretreatment using MW-hybrid processes.MW-H2O2 is the recommended sludge pretreatment process for phosphorus recovery in the form of struvite.The ratio of Mg^2+:NH4^+-N:PO4^3--P was 1.2:2.9:1 in the supernatant.(2) To clarify the effects of organic matter on struvite recovery,the composition and molecular weight distribution of organic matters were analyzed.Low molecular weight COD was found to facilitate the removal rate of NH4^+-N and PO4^3-P via crystallization,and the amorphous struvite crystals(〈1 kDa) from the filtered solutions had high purity.Therefore,the present study reveals the necessity of taking into consideration the interference effect of high molecular weight organic matters during struvite crystallization from sewage sludge.展开更多
文摘An efficient slagging is a key process to improve the dephosphorization ability in converter operation. The microstructure analyses can provide the information of phosphorus distribution in various mineral phases to feature completely the dephosphorization process.Two kinds of converter slags were investigated in this study, including conventional slag with high basicity and dephosphorization slag with low basicity.The characteristics of high basicity converter slag have been reported widely.However,the investigations on the low basicity slag properties for dephosphorization in converter are less discussed in steelmaking slag system.This study focused on the microstructure and phosphorus-containing phases in converter slag.The slag composition and mineral phase were examined by the usual XRF chemical analysis and EPMA,XRD studies.The results indicated that the phosphorus-containing phase in high basicity slag was the dicalcium silicate(2CaO·SiO_2 or C_2S) phase,while phosphorus in low basicity slag was incorporated in CaFeSiO_4 structure.
文摘The laboratory scale experiments for determining the influence on the distribution of phosphorus by.adding Al-containing component in melting furnace were conducted. It is found that the addition of Al-containing component in melting furnace increased the amount of phosphorus in slag phase. Thermodynamic analysis of the industrial sludge melting process with the addition of different Al-containing components was also carried out. The compositions of slag and the gas in three different zones in melting furnace were obtained. The results also demonstrate that increasing the mole ratio Al/P of charged materials is an effective way to fix more phosphorus in slap, which can help reduce the amount of H3PO4 precipitate from guy in the waste heat boiler later.
基金Project supported by the National Natural Science Foundation of China(Grant No.51239003,51509073,201501007 and 51279046)
文摘The distribution of the phosphorus(P) adsorption in a bed sediment at channel confluences is an important issue for understanding the transport of contaminants in channel networks. In this study, the flow structure and its effect on the P distribution in the bed sediment were investigated in a 90° confluence flume. It is shown that the P adsorption amount in the sediment varies significantly in different hydrodynamic zones. The P adsorption amount is high in the flow separation zone where the horizontal velocity of the flow is very small, and it is low in the maximum velocity zone where the flow velocity reaches a maximum. The low P adsorption amount is observed in the downstream portion of the distorted shear layer, while the P enrichment is found in the upstream portion, as is related to the significant downwelling flow in this zone. Thus, the flow structure, especially, the flow velocity, has a significant effect on the distribution of the P adsorption in the bed sediment at the channel confluences.
基金financially supported by the Major Science and Technology Program for Water Pollution Control and Treatment of China (No. 2015ZX07203-005, 2012ZX07202-005)the National Natural Science Foundation of China (No. 51008297)
文摘Microwave(MW) hybrid processes are able to disrupt the flocculent structure of complex waste activated sludge,and help promote the recovery of phosphorus as struvite.In this study,to optimize struvite yield,(1) the characteristics of matter released in MW-hybrid treatments were compared,including MW,MW-acid,MW-alkali,MW-H2O2,and MW-H2O2- alkali.The results showed that selective release of carbon,nitrogen,phosphorus,Ca^2+,and Mg^2+ achieved by sludge pretreatment using MW-hybrid processes.MW-H2O2 is the recommended sludge pretreatment process for phosphorus recovery in the form of struvite.The ratio of Mg^2+:NH4^+-N:PO4^3--P was 1.2:2.9:1 in the supernatant.(2) To clarify the effects of organic matter on struvite recovery,the composition and molecular weight distribution of organic matters were analyzed.Low molecular weight COD was found to facilitate the removal rate of NH4^+-N and PO4^3-P via crystallization,and the amorphous struvite crystals(〈1 kDa) from the filtered solutions had high purity.Therefore,the present study reveals the necessity of taking into consideration the interference effect of high molecular weight organic matters during struvite crystallization from sewage sludge.