期刊文献+
共找到5,809篇文章
< 1 2 250 >
每页显示 20 50 100
Synthetic polymers:A review of applications in drilling fluids 被引量:1
1
作者 Shadfar Davoodi Mohammed Al-Shargabi +2 位作者 David A.Wood Valeriy S.Rukavishnikov Konstantin M.Minaev 《Petroleum Science》 SCIE EI CAS CSCD 2024年第1期475-518,共44页
With the growth of deep drilling and the complexity of the well profile,the requirements for a more complete and efficient exploitation of productive formations increase,which increases the risk of various complicatio... With the growth of deep drilling and the complexity of the well profile,the requirements for a more complete and efficient exploitation of productive formations increase,which increases the risk of various complications.Currently,reagents based on modified natural polymers(which are naturally occurring compounds)and synthetic polymers(SPs)which are polymeric compounds created industrially,are widely used to prevent emerging complications in the drilling process.However,compared to modified natural polymers,SPs form a family of high-molecular-weight compounds that are fully synthesized by undergoing chemical polymerization reactions.SPs provide substantial flexibility in their design.Moreover,their size and chemical composition can be adjusted to provide properties for nearly all the functional objectives of drilling fluids.They can be classified based on chemical ingredients,type of reaction,and their responses to heating.However,some of SPs,due to their structural characteristics,have a high cost,a poor temperature and salt resistance in drilling fluids,and degradation begins when the temperature reaches 130℃.These drawbacks prevent SP use in some medium and deep wells.Thus,this review addresses the historical development,the characteristics,manufacturing methods,classification,and the applications of SPs in drilling fluids.The contributions of SPs as additives to drilling fluids to enhance rheology,filtrate generation,carrying of cuttings,fluid lubricity,and clay/shale stability are explained in detail.The mechanisms,impacts,and advances achieved when SPs are added to drilling fluids are also described.The typical challenges encountered by SPs when deployed in drilling fluids and their advantages and drawbacks are also discussed.Economic issues also impact the applications of SPs in drilling fluids.Consequently,the cost of the most relevant SPs,and the monomers used in their synthesis,are assessed.Environmental impacts of SPs when deployed in drilling fluids,and their manufacturing processes are identified,together with advances in SP-treatment methods aimed at reducing those impacts.Recommendations for required future research addressing SP property and performance gaps are provided. 展开更多
关键词 Synthetic versus natural polymers Nanopolymers Drilling fluid additives LUBRICITY Clay swelling Hole cleaning
下载PDF
Recent advances and innovations in the design and fabrication of wearable flexible biosensors and human health monitoring systems based on conjugated polymers 被引量:1
2
作者 Vinh Van Tran Viet-Duc Phung Daeho Lee 《Bio-Design and Manufacturing》 SCIE EI CAS CSCD 2024年第4期476-516,共41页
Wearable biosensors have received great interest as patient-friendly diagnostic technologies because of their high flexibility and conformability.The growing research and utilization of novel materials in designing we... Wearable biosensors have received great interest as patient-friendly diagnostic technologies because of their high flexibility and conformability.The growing research and utilization of novel materials in designing wearable biosensors have accelerated the development of point-of-care sensing platforms and implantable biomedical devices in human health care.Among numerous potential materials,conjugated polymers(CPs)are emerging as ideal choices for constructing high-performance wearable biosensors because of their outstanding conductive and mechanical properties.Recently,CPs have been extensively incorporated into various wearable biosensors to monitor a range of target biomolecules.However,fabricating highly reliable CP-based wearable biosensors for practical applications remains a significant challenge,necessitating novel developmental strategies for enhancing the viability of such biosensors.Accordingly,this review aims to provide consolidated scientific evidence by summarizing and evaluating recent studies focused on designing and fabricating CP-based wearable biosensors,thereby facilitating future research.Emphasizing the superior properties and benefits of CPs,this review aims to clarify their potential applicability within this field.Furthermore,the fundamentals and main components of CP-based wearable biosensors and their sensing mechanisms are discussed in detail.The recent advancements in CP nanostructures and hybridizations for improved sensing performance,along with recent innovations in next-generation wearable biosensors are highlighted.CPbased wearable biosensors have been—and will continue to be—an ideal platform for developing effective and user-friendly diagnostic technologies for human health monitoring. 展开更多
关键词 Conjugated polymers Wearable biosensors E-skin electronics Implantable biosensors Conductive polymer hydrogels
下载PDF
Conjugated microporous polymers-scaffolded enzyme cascade systems with enhanced catalytic activity
3
作者 Zhenhua Wu Jiafu Shi +6 位作者 Boyu Zhang Yushuai Jiao Xiangxuan Meng Ziyi Chu Yu Chen Yiran Cheng Zhongyi Jiang 《Chinese Journal of Catalysis》 SCIE CAS CSCD 2024年第8期213-223,共11页
Enhancing catalytic activity of multi-enzyme in vitro through substrate channeling effect is promis-ing yet challenging.Herein,conjugated microporous polymers(CMPs)-scaffolded integrated en-zyme cascade systems(I-ECSs... Enhancing catalytic activity of multi-enzyme in vitro through substrate channeling effect is promis-ing yet challenging.Herein,conjugated microporous polymers(CMPs)-scaffolded integrated en-zyme cascade systems(I-ECSs)are constructed through co-entrapping glucose oxidase(GOx)and horseradish peroxidase(HRP),in which hydrogen peroxide(H_(2)O_(2))is the intermediate product.The interplay of low-resistance mass transfer pathway and appropriate pore wall-H_(2)O_(2)interactions facilitates the directed transfer of H_(2)O_(2),resulting in 2.4-fold and 5.0-fold elevation in catalytic activ-ity compared to free ECSs and separated ECSs,respectively.The substrate channeling effect could be regulated by altering the mass ratio of GOx to HRP.Besides,I-ECSs demonstrate excellent stabili-ties in harsh environments and multiple recycling. 展开更多
关键词 BIOCATALYSIS IMMOBILIZATION Enzyme cascade system Substrate channeling effect Conjugated microporous polymers
下载PDF
Vanillin Based Polymers:VI.Poly(hydrovanilloin-furfural)and Poly(hydrovanilloin-5-hydroxymethylfurfural)
4
作者 Ananda S.Amarasekara Gabriel Murillo Morales Raghava R.Kommalapati 《Journal of Renewable Materials》 EI CAS 2024年第9期1495-1506,共12页
Renewable resources based polymers provides a sustainable alternative to petroleum derived polymeric materials.As a part of our series on synthesis of vanillin based renewable polymers,we report the synthesis of poly(... Renewable resources based polymers provides a sustainable alternative to petroleum derived polymeric materials.As a part of our series on synthesis of vanillin based renewable polymers,we report the synthesis of poly(hydrovanilloin-furfural)[poly(HVL-Fur)]and poly(hydrovanilloin–5-hydromethylfurfural)[poly(HVL-5-HMF)].Vanillin was dimerized to a mixtures of meso/DL-hydrovanilloins with 94%meso product by electrochemical reductive coupling in aqueous sodium hydroxide using lead electrodes in quantitative yield.Then sodium hydroxide catalyzed condensation of hydrovanilloin with furfural in water at 80℃for 72 h was used to synthesize poly(HVL-Fur)with Mw=8600 g mol^(−1),PDI=1.28 in 78%yield.Similarly,condensation of hydrovanilloin with 5-hydroxymethylfurfural at 80℃for 48 h produced poly(HVL-5-HMF)with Mw=12,100 g mol−1,PDI=1.27 in 68%yield.poly(HVL-Fur)and poly(HVL-5-HMF)showed similar Tg values of 59℃and 60℃,respectively;whereas melting behaviors are dissimilar with Tm 171℃–173℃and 148℃–182℃,respectively. 展开更多
关键词 VANILLIN hydrovanilloin FURFURAL 5-HYDROXYMETHYLFURFURAL renewable polymers
下载PDF
Renewable Polymers in Biomedical Applications:From the Bench to the Market
5
作者 Rauany Cristina Lopes Tamires Nossa +3 位作者 Wilton Rogério Lustri Gabriel Lombardo Maria Inés Errea Eliane Trovatti 《Journal of Renewable Materials》 EI CAS 2024年第4期643-666,共24页
Polymers from renewable resources have been used for a long time in biomedical applications and found an irreplaceable role in some of them.Their uses have been increasing because of their attractive properties,contri... Polymers from renewable resources have been used for a long time in biomedical applications and found an irreplaceable role in some of them.Their uses have been increasing because of their attractive properties,contributing to the improvement of life quality,mainly in drug release systems and in regenerative medicine.Formulations using natural polymer,nano and microscale particles preparation,composites,blends and chemical modification strategies have been used to improve their properties for clinical application.Although many studies have been carried out with these natural polymers,the way to reach the market is long and only very few of them become commercially available.Vegetable cellulose,bacterial cellulose,chitosan,poly(lactic acid)and starch can be found among the most studied polymers for biological applications,some with several derivatives already established in the market,and others with potential for such.In this scenario this work aims to describe the properties and potential of these renewable polymers for biomedical applications,the routes from the bench to the market,and the perspectives for future developments. 展开更多
关键词 polymers RENEWABLE biomedical applications MARKET
下载PDF
Innovative Methods of Synthesis and Characterization for Molecularly Imprinted Polymers
6
作者 Youyao Luo 《Open Journal of Applied Sciences》 2024年第9期2559-2579,共21页
The characterization of these molecularly imprinted polymers is essential to understanding their binding dynamics and structural properties. Through the analysis of the current research, it is found that there are ove... The characterization of these molecularly imprinted polymers is essential to understanding their binding dynamics and structural properties. Through the analysis of the current research, it is found that there are overlaps in the methods used by scholars. The Langmuir equation is frequently applied to model the adsorption isotherms of MIPs, providing critical insight into the capacity and affinity of the binding sites. Infrared Spectroscopy (IR) plays a crucial role in identifying the functional groups involved in the imprinting process and confirming the successful formation of specific binding sites. UV-visible spectrophotometry is employed to monitor the absorption characteristics of the polymers, offering data on the interactions between the template molecules and the polymer matrix. Transmission Electron Microscopy (TEM) provides detailed visualization of the internal structure of MIPs at the nanoscale, revealing the morphology and size of the imprinted cavities. Thermogravimetric Analysis (TGA) assesses the thermal stability and composition of the polymers, identifying decomposition patterns that are indicative of the material’s robustness under different conditions. Finally, the Laser Particle Size Analyzer is used to measure the size distribution of the polymer particles, which is critical for determining the uniformity and efficiency of the imprinting process. The six characterization methods discussed in this paper provide a comprehensive understanding of MIP, and it is hoped that in the future, more optimized design solutions will emerge and their applications in various fields will be enhanced. 展开更多
关键词 Molecularly Imprinted polymers Langmuir Equation Infrared Spectroscopy UV Visible Spectrophotometry Transmission Electron Microscopy
下载PDF
Achieving Synergistic Improvement in Dielectric and Energy Storage Properties of All-Organic Poly(Methyl Methacrylate)-Based Copolymers Via Establishing Charge Traps
7
作者 Guanghu He Huang Luo +5 位作者 Chuanfang Yan Yuting Wan Dang Wu Hang Luo Yuan Liu Sheng Chen 《Energy & Environmental Materials》 SCIE EI CAS CSCD 2024年第2期308-319,共12页
How to achieve synergistic improvement of permittivity(ε_(r))and breakdown strength(E_(b))is a huge challenge for polymer dielectrics.Here,for the first time,theπ-conjugated comonomer(MHT)can simultaneously promote ... How to achieve synergistic improvement of permittivity(ε_(r))and breakdown strength(E_(b))is a huge challenge for polymer dielectrics.Here,for the first time,theπ-conjugated comonomer(MHT)can simultaneously promote theε_(r)and E_(b)of linear poly(methyl methacrylate)(PMMA)copolymers.The PMMA-based random copolymer films(P(MMA-co-MHT)),block copolymer films(PMMA-b-PMHT),and PMMA-based blend films were prepared to investigate the effects of sequential structure,phase separation structure,and modification method on dielectric and energy storage properties of PMMA-based dielectric films.As a result,the random copolymer P(MMA-coMHT)can achieve a maximumε_(r)of 5.8 at 1 kHz owing to the enhanced orientation polarization and electron polarization.Because electron injection and charge transfer are limited by the strong electrostatic attraction ofπ-conjugated benzophenanthrene group analyzed by the density functional theory(DFT),the discharge energy density value of P(MMA-co-PMHT)containing 1 mol%MHT units with the efficiency of 80%reaches15.00 J cm^(-3)at 872 MV m^(-1),which is 165%higher than that of pure PMMA.This study provides a simple and effective way to fabricate the high performance of polymer dielectrics via copolymerization with the monomer of P-type semi-conductive polymer. 展开更多
关键词 dielectric capacitor electrical properties energy density polymer dielectric semiconductor polymer
下载PDF
Syntheses and catalytic performances of three coordination polymers with tetracarboxylate ligands
8
作者 MEI Zhenzhong WANG Hongyu +2 位作者 KANG Xiuqi SHAO Yongliang GU Jinzhong 《无机化学学报》 SCIE CAS CSCD 北大核心 2024年第9期1795-1802,共8页
Three zincand cobaltcoordination polymers,namely{[Zn_(2)(μ_(6)-adip)(phen)_(2)]·4H_(2)O}_(n)(1),{[Co_(2)(μ_(6)-adip)(bipy)_(2)]·4H_(2)O}_(n)(2),and[Co_(2)(μ4-adip)(μ-bpa)_(2)]_(n)(3)have been constructed... Three zincand cobaltcoordination polymers,namely{[Zn_(2)(μ_(6)-adip)(phen)_(2)]·4H_(2)O}_(n)(1),{[Co_(2)(μ_(6)-adip)(bipy)_(2)]·4H_(2)O}_(n)(2),and[Co_(2)(μ4-adip)(μ-bpa)_(2)]_(n)(3)have been constructed hydrothermally using H4adip(H4adip=5,5′-azanediyldiisophthalic acid),phen(phen=1,10-phenanthroline),bipy(bipy=2,2′-bipyridine),bpa(bpa=bis(4-pyridyl)amine),and zinc and cobalt chlorides at 160℃.The products were isolated as stable crystalline solids and were characterized by IR spectra,elemental analyses,thermogravimetric analyses,and single-crystal X-ray diffrac-tion analyses.Single-crystal X-ray diffraction analyses revealed that three compounds crystallize in the orthorhom-bic system Pnna(1 and 2)or P21212(3)space groups.All compounds exhibit 3D frameworks.The catalytic perfor-mances in the Henry reaction of these compounds were investigated.Compound 3 exhibited an effective catalytic activity in the Henry reaction at 70℃.CCDC:2339391,1;2339392,2;2339393,3. 展开更多
关键词 coordination polymer tetracarboxylic acid catalytic properties Henry reaction
下载PDF
Syntheses,crystal structures,and catalytic properties of three zinc(Ⅱ),cobalt(Ⅱ)and nickel(Ⅱ)coordination polymers constructed from 5⁃(4⁃carboxyphenoxy)nicotinic acid
9
作者 LING Weizhong CHEN Xiangyun +2 位作者 LIU Wenjing HUANG Yingkai LI Yu 《无机化学学报》 SCIE CAS CSCD 北大核心 2024年第9期1803-1810,共8页
Three zinc(Ⅱ),cobalt(Ⅱ),and nickel(Ⅱ)coordination polymers,namely[Zn(μ^(3-)cpna)(μ-dpea)_(0.5)]_(n)(1),[Co(μ^(3-)cpna)(μ-dpey)_(0.5)]_(n)(2),and[Ni(μ^(3-)cpna)(μ-dpey)_(0.5)(H_(2)O)]_(n)(3),have been construc... Three zinc(Ⅱ),cobalt(Ⅱ),and nickel(Ⅱ)coordination polymers,namely[Zn(μ^(3-)cpna)(μ-dpea)_(0.5)]_(n)(1),[Co(μ^(3-)cpna)(μ-dpey)_(0.5)]_(n)(2),and[Ni(μ^(3-)cpna)(μ-dpey)_(0.5)(H_(2)O)]_(n)(3),have been constructed hydrothermally using H_(2)cpna(5-(4-carboxyphenoxy)nicotinic acid),dpea(1,2-di(4-pyridyl)ethane),dpey(1,2-di(4-pyridyl)ethylene),and zinc,cobalt,and nickel chlorides at 160℃.The products were isolated as stable crystalline solids and were characterized by IR spectra,elemental analyses,thermogravimetric analyses,and single-crystal X-ray diffraction analyses.Single-crystal X-ray diffraction analyses revealed that three compounds crystallize in the triclinic system,space group P1.Compounds 1-3 show 2D layer structures.The catalytic activities in the Knoevenagel condensation reaction of these compounds were investigated.Compounds 1 and 2 exhibit effective catalytic activities in the Knoevenagel condensa-tion reaction at room temperature.For this reaction,various parameters were optimized,followed by the investiga-tion of the substrate scope.CCDC:2335676,1;2335677,2;2335678,3. 展开更多
关键词 coordination polymer dicarboxylic acid catalytic property Knoevenagel condensation reaction
下载PDF
Ignition processes and characteristics of charring conductive polymers with a cavity geometry in precombustion chamber for applications in micro/nano satellite hybrid rocket motors
10
作者 Zhiyuan Zhang Hanyu Deng +2 位作者 Wenhe Liao Bin Yu Zai Yu 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2024年第2期55-66,共12页
The arc ignition system based on charring polymers has advantages of simple structure,low ignition power consumption and multiple ignitions,which bringing it broadly application prospect in hybrid propulsion system of... The arc ignition system based on charring polymers has advantages of simple structure,low ignition power consumption and multiple ignitions,which bringing it broadly application prospect in hybrid propulsion system of micro/nano satellite.However,charring polymers alone need a relatively high input voltage to achieve pyrolysis and ignition,which increases the burden and cost of the power system of micro/nano satellite in practical application.Adding conductive substance into charring polymers can effectively decrease the conducting voltage which can realize low voltage and low power consumption repeated ignition of arc ignition system.In this paper,a charring conductive polymer ignition grain with a cavity geometry in precombustion chamber,which is composed of PLA and multiwall carbon nanotubes(MWCNT)was proposed.The detailed ignition processes were analyzed and two different ignition mechanisms in the cavity of charring conductive polymers were revealed.The ignition characteristics of charring conductive polymers were also investigated at different input voltages,ignition grain structures,ignition locations and injection schemes in a visual ignition combustor.The results demonstrated that the ignition delay and external energy required for ignition were inversely correlated with the voltages applied to ignition grain.Moreover,the incremental depth of cavity shortened the ignition delay and external energy required for ignition while accelerated the propagation of flame.As the depth of cavity increased from 2 to 6 mm(at 50 V),the time of flame propagating out of ignition grain changed from 235.6 to 108 ms,and values of mean ignition delay time and mean external energy required for ignition decreased from 462.8 to 320 ms and 16.2 to 10.75 J,respectively.The rear side of the cavity was the ideal ignition position which had a shorter ignition delay and a faster flame propagation speed in comparison to other ignition positions.Compared to direct injection scheme,swirling injection provided a more favorable flow field environment in the cavity,which was beneficial to ignition and initial flame propagation,but the ignition position needed to be away from the outlet of swirling injector.At last,the repeated ignition characteristic of charring conductive polymers was also investigated.The ignition delay time and external energy required for ignition decreased with repeated ignition times but the variation was decreasing gradually. 展开更多
关键词 Micro/nano satellite hybrid propulsion Arc ignition Charring conductive polymer Ignition mechanism Ignition characteristic Repeated ignition
下载PDF
High-performance and robust high-temperature polymer electrolyte membranes with moderate microphase separation by implementation of terphenyl-based polymers
11
作者 Jinyuan Li Congrong Yang +3 位作者 Haojiang Lin Jicai Huang Suli Wang Gongquan Sun 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2024年第5期572-578,共7页
Acid loss and plasticization of phosphoric acid(PA)-doped high-temperature polymer electrolyte membranes(HT-PEMs)are critical limitations to their practical application in fuel cells.To overcome these barriers,poly(te... Acid loss and plasticization of phosphoric acid(PA)-doped high-temperature polymer electrolyte membranes(HT-PEMs)are critical limitations to their practical application in fuel cells.To overcome these barriers,poly(terphenyl piperidinium)s constructed from the m-and p-isomers of terphenyl were synthesized to regulate the microstructure of the membrane.Highly rigid p-terphenyl units prompt the formation of moderate PA aggregates,where the ion-pair interaction between piperidinium and biphosphate is reinforced,leading to a reduction in the plasticizing effect.As a result,there are trade-offs between the proton conductivity,mechanical strength,and PA retention of the membranes with varied m/p-isomer ratios.The designed PA-doped PTP-20m membrane exhibits superior ionic conductivity,good mechanical strength,and excellent PA retention over a wide range of temperature(80–160°C)as well as satisfactory resistance to harsh accelerated aging tests.As a result,the membrane presents a desirable combination of performance(1.462 W cm^(-2) under the H_(2)/O_(2)condition,which is 1.5 times higher than that of PBI-based membrane)and durability(300 h at 160°C and 0.2 A cm^(-2))in the fuel cell.The results of this study provide new insights that will guide molecular design from the perspective of microstructure to improve the performance and robustness of HT-PEMs. 展开更多
关键词 Fuel cell High-temperature polymer electrolyte membranes Microphase separation Poly(terphenyl piperidinium)s Phosphoric acid
下载PDF
The Conversion of Non-Dispersed Polymers into Low-Potassium Anti-Collapse Drilling Fluids
12
作者 Hao Hu Jian Guan +2 位作者 Shanfa Tang Jialuo Rong Yuanpeng Cheng 《Fluid Dynamics & Materials Processing》 EI 2024年第2期325-335,共11页
Different drillingfluid systems are designed according to mineral composition,lithology and wellbore stability of different strata.In the present study,the conversion of a non-dispersed polymer drillingfluid into a low ... Different drillingfluid systems are designed according to mineral composition,lithology and wellbore stability of different strata.In the present study,the conversion of a non-dispersed polymer drillingfluid into a low potas-sium anti-collapsing drillingfluid is investigated.Since the two drillingfluids belong to completely different types,the key to this conversion is represented by new inhibitors,dispersants and water-loss agents by which a non-dispersed drillingfluid can be turned into a dispersed drillingfluid while ensuring wellbore stability and reason-able rheology(carrying sand—inhibiting cuttings dispersion).In particular,the(QYZ-1)inhibitors and(FSJSS-2)dispersants are used.The former can inhibit the hydration expansion capacity of clay,reduce the dynamic shear force and weaken the viscosity;the latter can improve the sealing effect and reduce thefiltrate loss.The results have shown that after adding a reasonable proportion of these substances(QYZ-1:FSJSS-2)to the non-dispersed polymer drillingfluid,while the apparent viscosity,plastic viscosity,structural viscosity andfluidity index under-went almost negligible changes,the dynamic plastic ratio increased,and thefiltration loss decreased significantly,thereby indicating good compatibility.According to the tests(conducted in the Leijia area),the density was 1.293 g/cm3,and after standing for 24 h,the SF(static settlement factor)was 0.51.Moreover,thefiltration loss was reduced to 4.0 mL,the rolling recovery rate reached 96.92%,with excellent plugging and anti-collapse performances. 展开更多
关键词 Non-dispersed polymer drilling fluid low potassium anti-collapsing drilling fluid drilling fluid conversion drilling fluid reuse filter vector
下载PDF
Metal organic polymers with dual catalytic sites for oxygen reduction and oxygen evolution reactions 被引量:3
13
作者 Sijia Liu Minghao Liu +4 位作者 Xuewen Li Shuai Yang Qiyang Miao Qing Xu Gaofeng Zeng 《Carbon Energy》 SCIE CSCD 2023年第5期127-137,共11页
Metal-organic frameworks and covalent organic frameworks have been widely employed in electrochemical catalysis owing to their designable skeletons,controllable porosities,and well-defined catalytic centers.However,th... Metal-organic frameworks and covalent organic frameworks have been widely employed in electrochemical catalysis owing to their designable skeletons,controllable porosities,and well-defined catalytic centers.However,the poor chemical stability and low electron conductivity limited their activity,and single-functional sites in these frameworks hindered them to show multifunctional roles in catalytic systems.Herein,we have constructed novel metal organic polymers(Co-HAT-CN and Ni-HAT-CN)with dual catalytic centers(metal-N_(4) and metal-N_(2))to catalyze oxygen reduction reaction(ORR)and oxygen evolution reaction(OER).By using different metal centers,the catalytic activity and selectivity were well-tuned.Among them,Co-HAT-CN catalyzed the ORR in a 4e^(-)pathway,with a half-wave potential of 0.8 V versus RHE,while the Ni-HAT-CN catalyze ORR in a 2e^(-)pathway with H_(2)O_(2) selectivity over 90%.Moreover,the Co-HAT-CN delivered an overpotential of 350 mV at 10 mA cm^(-2) with a corresponding Tafel slope of 24 mV dec^(-1) for OER in a 1.0 M KOH aqueous solution.The experimental results revealed that the activities toward ORR were due to the M-N_(4) sites in the frameworks,and both M-N_(4) and M-N_(2) sites contributed to the OER.This work gives us a new platform to construct bifunctional catalysts. 展开更多
关键词 covalent organic frameworks metal organic polymers oxygen evolution reaction oxygen reduction reaction single atom catalysts
下载PDF
Conducting Polymers Meet Lithium-Sulfur Batteries:Progress,Challenges,and Perspectives 被引量:1
14
作者 Xin Chen Chengcheng Zhao +6 位作者 Kai Yang Shiyi Sun Jinxin Bi Ningrui Zhu Qiong Cai Jianan Wang Wei Yan 《Energy & Environmental Materials》 SCIE EI CAS CSCD 2023年第5期159-182,共24页
Lithium-sulfur(Li-S)batteries have attracted increased interest because of the high theoretical energy density,low cost,and environmental friendliness.Conducting polymers(CPs),as one of the most promising materials us... Lithium-sulfur(Li-S)batteries have attracted increased interest because of the high theoretical energy density,low cost,and environmental friendliness.Conducting polymers(CPs),as one of the most promising materials used in Li-S batteries,can not only facilitate electron transfer and buffer the large volumetric change of sulfur benefiting from their porous structure and excellent flexibility,but also enable stronger physical/chemical adsorption capacity toward polysulfides(LiPSs)when doped with abundant heteroatoms to promote the sulfur redox kinetics and achieve the high sulfur loading.This review firstly introduces the properties of various CPs including structural CPs(polypyrrole(PPy),polyaniline(PANi),polyethylene dioxothiophene[PEDOT])and compound CPs(polyethylene oxide(PEO),polyvinyl alcohol(PVA)and poly(acrylic acid)[PAA]),and their application potential in Li-S batteries.Furthermore,the research progress of various CPs in different components(cathode,separator,and interlayer)of Li-S batteries is systematically summarized.Finally,the application perspective of the CPs in Li-S batteries as a potential guidance is comprehensively discussed. 展开更多
关键词 conducting polymers Li-S batteries modified materials POLYSULFIDES
下载PDF
Assembly of N-and P-functionalized carbon nanostructures derived from precursor-defined ternary copolymers for high-capacity lithiumion batteries
15
作者 Luyao Guo Mengru Wang +6 位作者 Ronghe Lin Jiaxin Ma Shuanghao Zheng Xiaoling Mou Jun Zhang Zhong-Shuai Wu Yunjie Ding 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2023年第1期280-288,共9页
Synthesis of new carbon nanostructures with tunable properties is vital for precisely regulating electrochemical performance in the wide applications.Herein,we report a novel approach for the oxidative polymerization ... Synthesis of new carbon nanostructures with tunable properties is vital for precisely regulating electrochemical performance in the wide applications.Herein,we report a novel approach for the oxidative polymerization of N-and P-bearing copolymers from the self-assembly of three different monomers(aniline,pyrrole,and phytic acid),and further prepare the respective carbon nanostructures with relatively consistent N dopant(6.2%–8.0%,atom)and varying P concentrations(0.4%–2.8%,atom)via controllable pyrolysis.The impacts of phytic acid addition on the compositional,structural,and morphological evolution of the copolymers and the resulting nanocarbons are well studied through a spectrum of characterizations including N2 sorption,Fourier transform infrared spectroscopy,gel permeation chromatograph,scanning/transmission electron microscopy,and X-ray photoelectron spectroscopy.Gradual fragmentation of the nanosphere structures is evidenced with increasing addition of phytic acid,leading to different nanostructures from hollow nanospheres to 3D aggregates.Nanocarbons decorated with N and P dopants from pyrolysis are further utilized as anode materials in lithium-ion batteries,demonstrating enhanced electrochemical performance,i.e.,a reversible capacity of 380 mAhg^(-1)at 2 Ag^(-1)for NPC-0.5 during 200 cycles.The superior performance originates from the balanced porosity,and appropriate concentrations of P and pyrrolic N,thus pointing the direction for designing high-performance anode materials. 展开更多
关键词 Carbon nanospheres Doping Lithium-ion batteries polymers Porosity
下载PDF
Synthesis of energetic coordination polymers based on 4-nitropyrazole by solid-melt crystallization in non-ionization condition
16
作者 Ting-wei Wang Shu Bu +4 位作者 Kun Wang Lu Zhang Zhen-xin Yi Shun-guan Zhu Jian-guo Zhang 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2023年第10期13-22,共10页
Based on the theory of crystallization,a solvent-free solid-liquid phase crystallization method called solid-melt crystallization was designed to prepare energetic coordination polymers.Two target compounds[Cu(NPyz)_(... Based on the theory of crystallization,a solvent-free solid-liquid phase crystallization method called solid-melt crystallization was designed to prepare energetic coordination polymers.Two target compounds[Cu(NPyz)_(4)NO_(3)]·NO_(3)(ECPs-1)and Cu(NPyz)_(4)(ClO_(4))_(2)(ECCs-2)were prepared through programmed heating and cooling by using 4-nitropyrazole(NPyz),(Cu(NO_(3))_(2)·5H_(2)O and Cu(ClO_(4))_(2)·5H_(2)O) as raw materials.In addition,crystallization pre-experiments and annealing experiments also verified the feasibility of the method.Their structures were confirmed by IR,elemental analysis,single-crystal X-ray diffraction and powder X-ray diffraction.The physicochemical properties and sensitivity test results showed that ECCs-2 has better thermal stability(T_(d)=221℃),while ECPs-1 is less sensitive to mechanical stimuli(IS=12 J,FS=240 N).Calculations based on EXPLO5 and the Kamlet-Jacobs equation showed that ECCs-2 has more considerable detonation performance(P=25.2 GPa,D=7.5 km/s).In comparison,the more intuitive results from the HN test,flame test,thermal resistance test and lead plate explosion test revealed that ECCs-2 has an“acceptable”detonation performance.The laser detonation test also showed that ECCs-2 is a promising excellent laser detonation material(E=408 mJ,P=24 W,τ=17 ms). 展开更多
关键词 4-Amino-1 2 5-oxadiazole-3-carbohydrazide Crystallization Coordination polymers Laser Primary explosives
下载PDF
助力汽车座舱消音降噪,ELIX Polymers推出特殊牌号ABS及PC/ABS
17
《塑料工业》 CAS CSCD 北大核心 2023年第7期137-137,共1页
ELIX Polymers公司近期开发了一系列特殊等级的ABS和PC/ABS,以减少汽车座舱内不同塑料零件以及塑料零件与皮革、PVC箔或其他产品接触时产生的杂音。在汽车座舱内部,这些噪音会对驾驶的舒适性以及驾驶员对汽车质量的感知产生负面影响。
关键词 PC/ABS 塑料零件 polymers PVC 消音降噪 座舱
下载PDF
High-sensitivity phase imaging eddy current magneto-optical system for carbon fiber reinforced polymers detection
18
作者 Jiang-Shan Ai Quan Zhou +5 位作者 Yi-Ping Liang Chun-Rui Feng Bing Long Li-Bing Bai Yong-Gang Wang Chao Ren 《Journal of Electronic Science and Technology》 EI CSCD 2023年第4期48-59,共12页
This paper proposed a high-sensitivity phase imaging eddy current magneto-optical (PI-ECMO) system for carbon fiber reinforced polymer (CFRP) defect detection. In contrast to other eddy current-based detection systems... This paper proposed a high-sensitivity phase imaging eddy current magneto-optical (PI-ECMO) system for carbon fiber reinforced polymer (CFRP) defect detection. In contrast to other eddy current-based detection systems, the proposed system employs a fixed position excitation coil while enabling the detection point to move within the detection region. This configuration effectively mitigates the interference caused by the lift-off effect, which is commonly observed in systems with moving excitation coils. Correspondingly, the relationship between the defect characteristics (orientation and position) and the surface vertical magnetic field distribution (amplitude and phase) is studied in detail by theoretical analysis and numerical simulations. Experiments conducted on woven CFRP plates demonstrate that the designed PI-ECMO system is capable of effectively detecting both surface and internal cracks, as well as impact defects. The excitation current is significantly reduced compared with traditional eddy current magneto-optical (ECMO) systems. 展开更多
关键词 Carbon fiber reinforced polymers Defect detection Eddy current magneto-optical Nondestructive testing Phase imaging
下载PDF
Hydrophobic Small-Molecule Polymers as High-Temperature-Resistant Inhibitors in Water-Based Drilling Fluids
19
作者 Xuyang Yao Kecheng Liu +5 位作者 Zenan Zhou Jun Zhou Xianbin Huang Tiemei Lu Yongsheng Yu He Li 《Fluid Dynamics & Materials Processing》 EI 2023年第7期1775-1787,共13页
Water-based drilling fluids can cause hydration of the wellbore rocks,thereby leading to instability.This study aimed to synthesize a hydrophobic small-molecule polymer(HLMP)as an inhibitor to suppress mud shale hydra... Water-based drilling fluids can cause hydration of the wellbore rocks,thereby leading to instability.This study aimed to synthesize a hydrophobic small-molecule polymer(HLMP)as an inhibitor to suppress mud shale hydration.An infrared spectral method and a thermogravimetric technique were used to characterize the chemical composition of the HLMP and evaluate its heat stability.Experiments were conducted to measure the linear swelling,rolling recovery rate,and bentonite inhibition rate and evaluate accordingly the inhibition performance of the HLMP.Moreover,the HLMP was characterized through measurements of the zeta potential,particle size distribution,contact angles,and interlayer space testing.As confirmed by the results,the HLMP could successfully be synthesized with a favorable heat stability.Furthermore,favorable results were found for the inhibitory processes of the HLMP on swelling and dispersed hydration during mud shale hydration.The positively charged HLMP could be electrically neutralized with clay particles,thereby inhibiting diffusion in the double electron clay layers.The hydrophobic group in the HLMP molecular structure resulted in the formation of a hydrophobic membrane on the rock surface,enhancing the hydrophobicity of the rock.In addition,the small molecules of the HLMP could plug the spaces between the layers of bentonite crystals,thereby reducing the entry of water molecules and inhibiting shale hydration. 展开更多
关键词 Water-based drilling fluids hydrophobic polymers shale inhibitor temperature resistance
下载PDF
Encapsulation of lipases on coordination polymers and their catalytic performance in glycerolysis and esterification
20
作者 Can Zeng Nanjing Zhong 《Grain & Oil Science and Technology》 CAS 2023年第3期113-119,共7页
In this study,lipases of CALB(Candida antarctica lipase B),TLL(Thermomyces lanuginosa lipase),RML(Rhizomucor miehei lipase),CALA(Candida antarctica lipase A)and LU(Lecitase?Ultra)were encapsulated into the nucleotideh... In this study,lipases of CALB(Candida antarctica lipase B),TLL(Thermomyces lanuginosa lipase),RML(Rhizomucor miehei lipase),CALA(Candida antarctica lipase A)and LU(Lecitase?Ultra)were encapsulated into the nucleotidehybrid metal coordination polymers(CPs)for diacylglyerols(DAG)preparation.Guanosine 5'-monophosphate(GMP)and adenosine 5'-monophosphate(AMP)were used as coordinating molecules,and metal ions of Fe^(3+),Ba^(2+),Mn^(2+),Ni^(2+)and Cr^(3+)were applied to prepare matrix.Results indicated that,besides Ba^(2+)with AMP,all other metal ions can coordinate with AMP and GMP to generate CPs.In addition,the AMP/Ni was amorphous when standing temperature was 4℃,while it was crystalline when standing temperature was from 30 to 180℃.DAG content from 47.55%to 64.99%was obtained from glycerolysis by CALB@GMP/Ba,RML@GMP/Ba,TLL@GMP/Ba,RML@GMP/Mn and TLL@GMP/Mn.Additionally,CALB@GMP/Fe showed selectivity towards DAG formation in the esterification and DAG content up to 61.88%was obtained. 展开更多
关键词 LIPASE Coordination polymers ENCAPSULATION GLYCEROLYSIS ESTERIFICATION
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部