Continuously improving the internal quality assurance system and promoting the innovative development of higher vocational education is a challenge that every higher vocational institution must solve on the road of di...Continuously improving the internal quality assurance system and promoting the innovative development of higher vocational education is a challenge that every higher vocational institution must solve on the road of diagnosis and improvement.To address the current dilemma of building internal quality assurance systems in higher education institutions,this study utilizes a case study approach.This study takes Jingzhou Vocational and Technical College as the research object for research.Conclusion:The excellent diagnosis and reform model and the effectiveness of diagnosis and reform in this school can provide new strategic ideas for the practice of diagnosis and reform for the high-quality development of higher education in Hubei.展开更多
To be a worldwide competitor, enterprise needs to e va luate and select its supplier carefully. Generally, to evaluate a supplier, the evaluating effort is focused on the purchase price, delivery time, product quali t...To be a worldwide competitor, enterprise needs to e va luate and select its supplier carefully. Generally, to evaluate a supplier, the evaluating effort is focused on the purchase price, delivery time, product quali ty, etc. The vendors’ quality assurance is seldom considered. However, it reflec ts the ability that a vendor can provide high quality but low cost products cont inuously and stably. In this paper, with the study on evaluation of supplier’s q uality assurance system, a set of methods and indices to supplier’s quality assu rance evaluation is introduced. The indices construct an index system, which is based on the ISO9000 series standards. According to the problem’s character and the requirement of evaluation, all the evaluation indices are set off to three k inds: general index, functional index and protective index. And the evaluation m ethod combines quantitative analysis with qualitative analysis. Firstly, a sensi tive factor model is constructed to estimate the contribution of factors that ha ve key effect on synthetic evaluation in supplier’s quality system. Then, those suppliers having low evaluating value are rejected. Secondly, fuzzy logic is int roduced to evaluate other suppliers synthetically. The rest suppliers are compar able. So, supplier’s quality assurance system can be evaluated in quantity. Afte r unification works, the evaluated suppliers can be ranked. And the best vendor can be selected out intuitively.展开更多
Integrated Quality Assurance System (IQAS) is an important part of CIMS.This paper introduces the architecture of IQAS,elaborates the philosophy of quality assurance and quality control in CIMS.A type of function mode...Integrated Quality Assurance System (IQAS) is an important part of CIMS.This paper introduces the architecture of IQAS,elaborates the philosophy of quality assurance and quality control in CIMS.A type of function model is proposed.Meanwhile, details of the model are described.展开更多
This study aims at the role of human resources management and quality assurance system to achieving the competitive advantage for the organization.Human resource management are the most important component among the o...This study aims at the role of human resources management and quality assurance system to achieving the competitive advantage for the organization.Human resource management are the most important component among the organization’s components,because,even an organization owns all other resources(materials,financial,technological)without the appropriate,skilled and experienced human resources,failure will be the expected result.Addressing By the Mobilis Telecom company,the study and through exploring the recruitment resources and methods that used by the company,in hiring the best employees,and the role of these methods in achieving the competitive advantage in Telecommunications sector.The findings of the study were that the company success in the recruitment process was relying on the employment agencies,firstly and on the universities,secondly.Also the company aimed on maintaining quality assurance system through recruiting method that based on Telecommunications experience and advancement in studying.In order to achieve the competitive advantage,the Company focused on innovation and creating new products and services for its clients.The statistical analysis proved that there is a strong relationship between recruitment resources used by the Company and achieving the competitive advantage,Also a relationship between the quality assurance system of the employees and the ability to gain the competitive advantage.展开更多
Aerospace manufacturing SMEs are continuously facing the challenge on managing their supply chain and complying with the aerospace manufacturing quality standard requirement due to their lack of resources and the natu...Aerospace manufacturing SMEs are continuously facing the challenge on managing their supply chain and complying with the aerospace manufacturing quality standard requirement due to their lack of resources and the nature of business. In this paper, the ERP system based approach is presented to quality control and assurance work in light of seamless integration of in-process production data and information internally and therefore managing suppliers more effectively and efficiently. The Aerospace Manufacturing Quality Assurance Standard (BS/EN9100) is one of the most recognised and essential protocols for developing the industry-operated-and-driven quality assurance systems. The research investigates using the ERP based system as an enabler to implement BS/EN9100 quality management system at manufacturing SMEs and the associated implementation and application perspectives. An application case study on a manufacturing SME is presented by using the SAP based implementation, which helps fiarther evaluate and validate the approach and application system development.展开更多
Improving the quality assurance (QA) processes and acquiring accreditation are top priorities for academic programs. The learning outcomes (LOs)assessment and continuous quality improvement represent core components ...Improving the quality assurance (QA) processes and acquiring accreditation are top priorities for academic programs. The learning outcomes (LOs)assessment and continuous quality improvement represent core components ofthe quality assurance system (QAS). Current assessment methods suffer deficiencies related to accuracy and reliability, and they lack well-organized processes forcontinuous improvement planning. Moreover, the absence of automation, andintegration in QA processes forms a major obstacle towards developing efficientquality system. There is a pressing need to adopt security protocols that providerequired security services to safeguard the valuable information processed byQAS as well. This research proposes an effective methodology for LOs assessment and continuous improvement processes. The proposed approach ensuresmore accurate and reliable LOs assessment results and provides systematic wayfor utilizing those results in the continuous quality improvement. This systematicand well-specified QA processes were then utilized to model and implement automated and secure QAS that efficiently performs quality-related processes. Theproposed system adopts two security protocols that provide confidentiality, integrity, and authentication for quality data and reports. The security protocols avoidthe source repudiation, which is important in the quality reporting system. This isachieved through implementing powerful cryptographic algorithms. The QASenables efficient data collection and processing required for analysis and interpretation. It also prepares for the development of datasets that can be used in futureartificial intelligence (AI) researches to support decision making and improve thequality of academic programs. The proposed approach is implemented in a successful real case study for a computer science program. The current study servesscientific programs struggling to achieve academic accreditation, and gives rise tofully automating and integrating the QA processes and adopting modern AI andsecurity technologies to develop effective QAS.展开更多
Huaiyin Institute of Technology is taken as the research object.The content of horticulture curriculum system under the background of new agricultural science is constructed and elaborated,including theoretical curric...Huaiyin Institute of Technology is taken as the research object.The content of horticulture curriculum system under the background of new agricultural science is constructed and elaborated,including theoretical curriculum system of"three platforms and seven curriculum groups"and practice system of"two platforms,three levels and four modules".Moreover,the quality assurance strategy of the curriculum system is discussed from three angles of enhancing professional emotion,enhancing professional practice and strengthening innovation ability,to reach the training objective of outstanding applied horticultural talents under the background of new agricultural science.展开更多
Each rock joint is unique by nature which means that utilization of replicas in direct shear tests is required in experimental parameter studies.However,a method to acquire knowledge about the ability of the replicas ...Each rock joint is unique by nature which means that utilization of replicas in direct shear tests is required in experimental parameter studies.However,a method to acquire knowledge about the ability of the replicas to imitate the shear mechanical behavior of the rock joint and their dispersion in direct shear testing is lacking.In this study,a novel method is presented for geometric quality assurance of replicas.The aim is to facilitate generation of high-quality direct shear testing data as a prerequisite for reliable subsequent analyses of the results.In Part 1 of this study,two quality assurance parameters,smf and V_(Hp100),are derived and their usefulness for evaluation of geometric deviations,i.e.geometric reproducibility,is shown.In Part 2,the parameters are validated by showing a correlation between the parameters and the shear mechanical behavior,which qualifies the parameters for usage in the quality assurance method.Unique results from direct shear tests presenting comparisons between replicas and the rock joint show that replicas fulfilling proposed threshold values of σ_(mf)<0.06 mm and|V_(Hp100)|<0.2 mm have a narrow dispersion and imitate the shear mechanical behavior of the rock joint in all aspects apart from having a slightly lower peak shear strength.The wear in these replicas,which have similar morphology as the rock joint,is in the same areas as in the rock joint.The wear is slightly larger in the rock joint and therefore the discrepancy in peak shear strength derives from differences in material properties,possibly from differences in toughness.It is shown by application of the suggested method that the quality assured replicas manufactured following the process employed in this study phenomenologically capture the shear strength characteristics,which makes them useful in parameter studies.展开更多
Since each rock joint is unique by nature,the utilization of replicas in direct shear testing is required to carry out experimental parameter studies.However,information about the ability of the replicas to simulate t...Since each rock joint is unique by nature,the utilization of replicas in direct shear testing is required to carry out experimental parameter studies.However,information about the ability of the replicas to simulate the shear mechanical behavior of the rock joint and their dispersion in direct shear testing is lacking.With the aim to facilitate generation of high-quality direct shear test data from replicas,a novel component in the testing procedure is introduced by presenting two parameters for geometric quality assurance.The parameters are derived from surface comparisons of three-dimensional(3D)scanning data of the rock joint and its replicas.The first parameter,smf,captures morphological deviations between the replica and the rock joint surfaces.smf is derived as the standard deviation of the deviations between the coordinate points of the replica and the rock joint.Four sources of errors introduced in the replica manufacturing process employed in this study could be identified.These errors could be minimized,yielding replicas with smf0.06 mm.The second parameter is a vector,VHp100,which describes deviations with respect to the shear direction.It is the projection of the 100 mm long normal vector of the best-fit plane of the replica joint surface to the corresponding plane of the rock joint.VHp100was found to be less than or equal to 0.36 mm in this study.Application of these two geometric quality assurance parameters demonstrates that it is possible to manufacture replicas with high geometric similarity to the rock joint.In a subsequent paper(part 2),smf and VHp100 are incorporated in a novel quality assurance method,in which the parameters shall be evaluated prior to direct shear testing.Replicas having parameter values below established thresholds shall have a known and narrow dispersion and imitate the shear mechanical behavior of the rock joint.展开更多
Purpose: Patient-specific quality assurance (PSQA) requires manual operation of different workstations, which is time-consuming and error-prone. Therefore, developing automated solutions to improve efficiency and accu...Purpose: Patient-specific quality assurance (PSQA) requires manual operation of different workstations, which is time-consuming and error-prone. Therefore, developing automated solutions to improve efficiency and accuracy is a priority. The purpose of this study was to develop a general software interface with scripting on a human interactive device (HID) for improving the efficiency and accuracy of manual quality assurance (QA) procedures. Methods: As an initial application, we aimed to automate our PSQA workflow that involves Varian Eclipse treatment planning system, Elekta MOSAIQ oncology information system and PTW Verisoft application. A general platform, the AutoFrame interface with two imbedded subsystems—the AutoFlow and the PyFlow, was developed with a scripting language for automating human operations of aforementioned systems. The interface included three functional modules: GUI module, UDF script interpreter and TCP/IP communication module. All workstations in the PSQA process were connected, and most manual operations were automated by AutoFrame sequentially or in parallel. Results: More than 20 PSQA tasks were performed both manually and using the developed AutoFrame interface. On average, 175 (±12) manual operations of the PSQA procedure were eliminated and performed by the automated process. The time to complete a PSQA task was 8.23 (±0.78) minutes for the automated workflow, in comparison to 13.91 (±3.01) minutes needed for manual operations. Conclusion: We have developed the AutoFrame interface framework that successfully automated our PSQA procedure, and significantly reduced the time, human (control/clicking/typing) errors, and operators’ stress. Future work will focus on improving the system’s flexibility and stability and extending its operations to other QA procedures.展开更多
As big data becomes an apparent challenge to handle when building a business intelligence(BI)system,there is a motivation to handle this challenging issue in higher education institutions(HEIs).Monitoring quality in H...As big data becomes an apparent challenge to handle when building a business intelligence(BI)system,there is a motivation to handle this challenging issue in higher education institutions(HEIs).Monitoring quality in HEIs encompasses handling huge amounts of data coming from different sources.This paper reviews big data and analyses the cases from the literature regarding quality assurance(QA)in HEIs.It also outlines a framework that can address the big data challenge in HEIs to handle QA monitoring using BI dashboards and a prototype dashboard is presented in this paper.The dashboard was developed using a utilisation tool to monitor QA in HEIs to provide visual representations of big data.The prototype dashboard enables stakeholders to monitor compliance with QA standards while addressing the big data challenge associated with the substantial volume of data managed by HEIs’QA systems.This paper also outlines how the developed system integrates big data from social media into the monitoring dashboard.展开更多
Longitudinal joint construction quality is critical to the life of flexible pavements.Maintaining deteriorated longitudinal joints has become a challenge for many highway agencies.Improving the joint's quality thr...Longitudinal joint construction quality is critical to the life of flexible pavements.Maintaining deteriorated longitudinal joints has become a challenge for many highway agencies.Improving the joint's quality through better compaction during construction can help achieve flexible pavements with longer service lives and less maintenance.Current quality control(QC)and quality assurance(QA)plans provide limited coverage.Consequently,the risk of missing areas with poor joint compaction is significant.A density profiling system(DPS)is a non-destructive alternative to conventional destructive evaluation methods.It can provide quick and continuous real-time coverage of the compaction during construction in dielectrics.The paper presents several case studies comparing various types of longitudinal joints and demonstrating the use of DPS to evaluate the joint's compaction quality.The paper shows that dielectric measurements can provide valuable insight into the ability of various construction techniques to achieve adequate levels of compaction at the longitudinal joint.The paper proposes a dielectric-based longitudinal joint quality index(LJQI)to evaluate the relative compaction of the joint during construction.It also shows that adopting DPS for assessing the compaction of longitudinal joints can minimize the risk of agencies accepting poorly constructed joints,identify locations of poor quality during construction,and achieve better-performing flexible pavements.展开更多
Information security and quality management are often considered two different fields. However, organizations must be mindful of how software security may affect quality control. This paper examines and promotes metho...Information security and quality management are often considered two different fields. However, organizations must be mindful of how software security may affect quality control. This paper examines and promotes methods through which secure software development processes can be integrated into the Systems Software Development Life-cycle (SDLC) to improve system quality. Cyber-security and quality assurance are both involved in reducing risk. Software security teams work to reduce security risks, whereas quality assurance teams work to decrease risks to quality. There is a need for clear standards, frameworks, processes, and procedures to be followed by organizations to ensure high-level quality while reducing security risks. This research uses a survey of industry professionals to help identify best practices for developing software with fewer defects from the early stages of the SDLC to improve both the quality and security of software. Results show that there is a need for better security awareness among all members of software development teams.展开更多
Quality assurance (QA) and quality control (QC) are fundamental aspects of any laboratory measurement. However, in comparison with other medical disciplines, the need for QA and QC in laboratory andrology has been...Quality assurance (QA) and quality control (QC) are fundamental aspects of any laboratory measurement. However, in comparison with other medical disciplines, the need for QA and QC in laboratory andrology has been recognized only recently. Furthermore, there is evidence that the effort required to undertake QA and QC has not been wholly welcomed by some clinicians. Nevertheless, accrediting bodies and regulatory authorities increasingly require evidence that laboratories have effective QA and QC measures in place because both are central to the quality management processes. Following the publication of the 5th edition of the World Health Organization Laboratory Manual, existing QA and QC systems will need to be updated to take into account some of the methodological changes recommended by the manual. Three of these are discussed in this commentary; they relate to: (i) the move to infer semen volume from its weight; (ii) the re-classification of sperm motility grades from four to three; and (iii) the publication of a lower reference limit for morphology of 4% (with a corresponding 95% confidence interval of 3%-4%). The importance of QA and QC in all laboratory tests, including up and coming new tests to assess sperm DNA integrity, is discussed. The need for adequate initial training and continuing professional development programmes to support laboratory scientists performing andrology is also described.展开更多
A mobile C-band dual polarimetric weather radar J type (PCDJ), which adopts simultaneous transmission and simultaneous reception (STSR) of horizontally and vertically polarized signals, was first developed in Chin...A mobile C-band dual polarimetric weather radar J type (PCDJ), which adopts simultaneous transmission and simultaneous reception (STSR) of horizontally and vertically polarized signals, was first developed in China in 2008. It was deployed in the radar observation plan in the South China Heavy Rainfall Experiment (SCHeREX) in the summer of 2008 and 2009, as well as in Tropical Western Pacific Ocean Observation Experiments and Research on the Predictability of High Impact Weather Events from 2008 to 2010 in China (TWPOR). Using the observation data collected in these experiments, the radar systematic error and its sources were analyzed in depth. Meanwhile an algorithm that can smooth differential propagation phase (~Dp) for estimating the high-resolution specific differential phase (KDP) was developed. After attenuation correction of reflectivity in horizontal polarization (ZH) and differential reflectivity (ZDR) of PCDJ radar by means of KDP, the data quality was improved significantly. Using quality-controlled radar data, quantitative rainfall estimation was performed, and the resutls were compared with rain-gauge measurements. A synthetic ZH /KDp-based method was analyzed. The results the traditional ZH-based method when the rain suggest that the synthetic method has the advantage over rate is 〉5 mm h^-1. The more intensive the rain rates, the higher accuracy of the estimation.展开更多
As developing countries become more involved in the international chemical trade, they must adhere to certain requirements for importation of their chemicals into foreign countries. These developing countries will be ...As developing countries become more involved in the international chemical trade, they must adhere to certain requirements for importation of their chemicals into foreign countries. These developing countries will be required to provide basic safety information on their chemical products, including data developed from chemical and toxicologic testing. These data must be developed in accordance with the national requirements of the importing country. Many importing countries have adopted the OECD Test Guidelines and the OECD Principles of Good Laboratory Practice (GLP) as primary guidance to assure the quality of laboratory data. These procedures provide a basis for internationally acceptable data. Several countries have incorporated many of these provisions into their national laws or administrative procedures. These procedures describe the process of documenting the conduct of laboratory studies, including recording of data, reporting of study results, and storage of data gathered. This process is intended to assure the quality and integrity of the data so that, if required, the study can be reconstructed by an auditor or an inspector. Details of these procedures and their applicability to the international chemical trade are discussed. 1989 Academic Press, Inc.展开更多
This paper presents a broad range of suggestions on the concept of quality-assured industry-oriented higher education in software engineering,a central theme of the annual CEISIE(CEISEE this year) workshops since the ...This paper presents a broad range of suggestions on the concept of quality-assured industry-oriented higher education in software engineering,a central theme of the annual CEISIE(CEISEE this year) workshops since the first one held in Harbin,China,in 2005.It draws on the lessons of collaborative experiences involving academics and industrialists from Europe and China.These experiences make the case for a strong role for software industryoriented higher education in the production of the software architects,developers and engineers required for the future.展开更多
Purpose: To test the concept of Statistical Process Control (SPC) as a Quality Assurance (QA) procedure for dose verifications in external beam radiation therapy in conventional and 3D Conformal Radiotherapy (3D-CRT) ...Purpose: To test the concept of Statistical Process Control (SPC) as a Quality Assurance (QA) procedure for dose verifications in external beam radiation therapy in conventional and 3D Conformal Radiotherapy (3D-CRT) treatment of cervical cancer. Materials and Methods: A study of QA verification of target doses of 198 cervical cancer patients undergoing External Beam Radiotherapy (EBRT) treatments at two different cancer treatment centers in Kenya was conducted. The target doses were determined from measured entrance doses by the diode in vivo dosimetry. Process Behavior Charts (PBC) developed by SPC were applied for setting Action Thresholds (AT) on the target doses. The AT set was then proposed as QA limits for acceptance or rejection of verified target doses overtime of the EBRT process. Result and Discussion: Target doses for the 198 patients were calculated and SPC applied to test whether the action limits set by the Process Behavior Charts could be applied as QA for verified doses in EBRT. Results for the two sub-groups of n = 3 and n = 4 that were tested produced action thresholds which are within clinical dose specifications for both conventional AP/PA and 3D-CRT EBRT treatment techniques for cervical cancer. Conclusion: Action thresholds set by SPC were within the clinical dose specification of ±5% uncertainty for both conventional AP/PA and 3D-CRT EBRT treatment techniques for cervical cancer. So the concept of SPC could be applied in setting QA action limits for dose verifications in EBRT.展开更多
Automatic monitoring data of pollution sources is an important basis for environmental supervision and management.At present,it is difficult to guarantee the quality of automatic monitoring data of pollution sources,a...Automatic monitoring data of pollution sources is an important basis for environmental supervision and management.At present,it is difficult to guarantee the quality of automatic monitoring data of pollution sources,and it is difficult to play the role of the monitoring data.In response to this problem,the factors influencing the quality of automatic monitoring data of pollution sources were analyzed in detail,and technical assurance measures for the quality of automatic monitoring data of pollution sources in Shandong Province were studied.Besides,the dynamic management and control idea of automatic monitoring of pollution sources was proposed,and specific technical measures were analyzed from five aspects of standardizing automatic monitoring equipment of pollution sources,improving the data collection and transmission system,establishing a mechanism for reporting operating status information of monitoring equipment,setting alarm rules and alarm processing procedures,and statistically analyzing the operating status of the equipment.Practice has proved that the dynamic management and control system can effectively ensure the quality of automatic monitoring data of pollution sources.展开更多
文摘Continuously improving the internal quality assurance system and promoting the innovative development of higher vocational education is a challenge that every higher vocational institution must solve on the road of diagnosis and improvement.To address the current dilemma of building internal quality assurance systems in higher education institutions,this study utilizes a case study approach.This study takes Jingzhou Vocational and Technical College as the research object for research.Conclusion:The excellent diagnosis and reform model and the effectiveness of diagnosis and reform in this school can provide new strategic ideas for the practice of diagnosis and reform for the high-quality development of higher education in Hubei.
文摘To be a worldwide competitor, enterprise needs to e va luate and select its supplier carefully. Generally, to evaluate a supplier, the evaluating effort is focused on the purchase price, delivery time, product quali ty, etc. The vendors’ quality assurance is seldom considered. However, it reflec ts the ability that a vendor can provide high quality but low cost products cont inuously and stably. In this paper, with the study on evaluation of supplier’s q uality assurance system, a set of methods and indices to supplier’s quality assu rance evaluation is introduced. The indices construct an index system, which is based on the ISO9000 series standards. According to the problem’s character and the requirement of evaluation, all the evaluation indices are set off to three k inds: general index, functional index and protective index. And the evaluation m ethod combines quantitative analysis with qualitative analysis. Firstly, a sensi tive factor model is constructed to estimate the contribution of factors that ha ve key effect on synthetic evaluation in supplier’s quality system. Then, those suppliers having low evaluating value are rejected. Secondly, fuzzy logic is int roduced to evaluate other suppliers synthetically. The rest suppliers are compar able. So, supplier’s quality assurance system can be evaluated in quantity. Afte r unification works, the evaluated suppliers can be ranked. And the best vendor can be selected out intuitively.
基金Supported by the Commission of Science,Technology and Industry for National Defence of China
文摘Integrated Quality Assurance System (IQAS) is an important part of CIMS.This paper introduces the architecture of IQAS,elaborates the philosophy of quality assurance and quality control in CIMS.A type of function model is proposed.Meanwhile, details of the model are described.
文摘This study aims at the role of human resources management and quality assurance system to achieving the competitive advantage for the organization.Human resource management are the most important component among the organization’s components,because,even an organization owns all other resources(materials,financial,technological)without the appropriate,skilled and experienced human resources,failure will be the expected result.Addressing By the Mobilis Telecom company,the study and through exploring the recruitment resources and methods that used by the company,in hiring the best employees,and the role of these methods in achieving the competitive advantage in Telecommunications sector.The findings of the study were that the company success in the recruitment process was relying on the employment agencies,firstly and on the universities,secondly.Also the company aimed on maintaining quality assurance system through recruiting method that based on Telecommunications experience and advancement in studying.In order to achieve the competitive advantage,the Company focused on innovation and creating new products and services for its clients.The statistical analysis proved that there is a strong relationship between recruitment resources used by the Company and achieving the competitive advantage,Also a relationship between the quality assurance system of the employees and the ability to gain the competitive advantage.
基金support for this research (R85169) from Mollart Engineering Ltd
文摘Aerospace manufacturing SMEs are continuously facing the challenge on managing their supply chain and complying with the aerospace manufacturing quality standard requirement due to their lack of resources and the nature of business. In this paper, the ERP system based approach is presented to quality control and assurance work in light of seamless integration of in-process production data and information internally and therefore managing suppliers more effectively and efficiently. The Aerospace Manufacturing Quality Assurance Standard (BS/EN9100) is one of the most recognised and essential protocols for developing the industry-operated-and-driven quality assurance systems. The research investigates using the ERP based system as an enabler to implement BS/EN9100 quality management system at manufacturing SMEs and the associated implementation and application perspectives. An application case study on a manufacturing SME is presented by using the SAP based implementation, which helps fiarther evaluate and validate the approach and application system development.
基金Author extends his appreciation to the Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University for funding and supporting this work through Graduate Student Research Support Program.
文摘Improving the quality assurance (QA) processes and acquiring accreditation are top priorities for academic programs. The learning outcomes (LOs)assessment and continuous quality improvement represent core components ofthe quality assurance system (QAS). Current assessment methods suffer deficiencies related to accuracy and reliability, and they lack well-organized processes forcontinuous improvement planning. Moreover, the absence of automation, andintegration in QA processes forms a major obstacle towards developing efficientquality system. There is a pressing need to adopt security protocols that providerequired security services to safeguard the valuable information processed byQAS as well. This research proposes an effective methodology for LOs assessment and continuous improvement processes. The proposed approach ensuresmore accurate and reliable LOs assessment results and provides systematic wayfor utilizing those results in the continuous quality improvement. This systematicand well-specified QA processes were then utilized to model and implement automated and secure QAS that efficiently performs quality-related processes. Theproposed system adopts two security protocols that provide confidentiality, integrity, and authentication for quality data and reports. The security protocols avoidthe source repudiation, which is important in the quality reporting system. This isachieved through implementing powerful cryptographic algorithms. The QASenables efficient data collection and processing required for analysis and interpretation. It also prepares for the development of datasets that can be used in futureartificial intelligence (AI) researches to support decision making and improve thequality of academic programs. The proposed approach is implemented in a successful real case study for a computer science program. The current study servesscientific programs struggling to achieve academic accreditation, and gives rise tofully automating and integrating the QA processes and adopting modern AI andsecurity technologies to develop effective QAS.
基金Supported by Higher Education Research Project of Huaiyin Institute of Technology(2019GJ12).
文摘Huaiyin Institute of Technology is taken as the research object.The content of horticulture curriculum system under the background of new agricultural science is constructed and elaborated,including theoretical curriculum system of"three platforms and seven curriculum groups"and practice system of"two platforms,three levels and four modules".Moreover,the quality assurance strategy of the curriculum system is discussed from three angles of enhancing professional emotion,enhancing professional practice and strengthening innovation ability,to reach the training objective of outstanding applied horticultural talents under the background of new agricultural science.
文摘Each rock joint is unique by nature which means that utilization of replicas in direct shear tests is required in experimental parameter studies.However,a method to acquire knowledge about the ability of the replicas to imitate the shear mechanical behavior of the rock joint and their dispersion in direct shear testing is lacking.In this study,a novel method is presented for geometric quality assurance of replicas.The aim is to facilitate generation of high-quality direct shear testing data as a prerequisite for reliable subsequent analyses of the results.In Part 1 of this study,two quality assurance parameters,smf and V_(Hp100),are derived and their usefulness for evaluation of geometric deviations,i.e.geometric reproducibility,is shown.In Part 2,the parameters are validated by showing a correlation between the parameters and the shear mechanical behavior,which qualifies the parameters for usage in the quality assurance method.Unique results from direct shear tests presenting comparisons between replicas and the rock joint show that replicas fulfilling proposed threshold values of σ_(mf)<0.06 mm and|V_(Hp100)|<0.2 mm have a narrow dispersion and imitate the shear mechanical behavior of the rock joint in all aspects apart from having a slightly lower peak shear strength.The wear in these replicas,which have similar morphology as the rock joint,is in the same areas as in the rock joint.The wear is slightly larger in the rock joint and therefore the discrepancy in peak shear strength derives from differences in material properties,possibly from differences in toughness.It is shown by application of the suggested method that the quality assured replicas manufactured following the process employed in this study phenomenologically capture the shear strength characteristics,which makes them useful in parameter studies.
文摘Since each rock joint is unique by nature,the utilization of replicas in direct shear testing is required to carry out experimental parameter studies.However,information about the ability of the replicas to simulate the shear mechanical behavior of the rock joint and their dispersion in direct shear testing is lacking.With the aim to facilitate generation of high-quality direct shear test data from replicas,a novel component in the testing procedure is introduced by presenting two parameters for geometric quality assurance.The parameters are derived from surface comparisons of three-dimensional(3D)scanning data of the rock joint and its replicas.The first parameter,smf,captures morphological deviations between the replica and the rock joint surfaces.smf is derived as the standard deviation of the deviations between the coordinate points of the replica and the rock joint.Four sources of errors introduced in the replica manufacturing process employed in this study could be identified.These errors could be minimized,yielding replicas with smf0.06 mm.The second parameter is a vector,VHp100,which describes deviations with respect to the shear direction.It is the projection of the 100 mm long normal vector of the best-fit plane of the replica joint surface to the corresponding plane of the rock joint.VHp100was found to be less than or equal to 0.36 mm in this study.Application of these two geometric quality assurance parameters demonstrates that it is possible to manufacture replicas with high geometric similarity to the rock joint.In a subsequent paper(part 2),smf and VHp100 are incorporated in a novel quality assurance method,in which the parameters shall be evaluated prior to direct shear testing.Replicas having parameter values below established thresholds shall have a known and narrow dispersion and imitate the shear mechanical behavior of the rock joint.
文摘Purpose: Patient-specific quality assurance (PSQA) requires manual operation of different workstations, which is time-consuming and error-prone. Therefore, developing automated solutions to improve efficiency and accuracy is a priority. The purpose of this study was to develop a general software interface with scripting on a human interactive device (HID) for improving the efficiency and accuracy of manual quality assurance (QA) procedures. Methods: As an initial application, we aimed to automate our PSQA workflow that involves Varian Eclipse treatment planning system, Elekta MOSAIQ oncology information system and PTW Verisoft application. A general platform, the AutoFrame interface with two imbedded subsystems—the AutoFlow and the PyFlow, was developed with a scripting language for automating human operations of aforementioned systems. The interface included three functional modules: GUI module, UDF script interpreter and TCP/IP communication module. All workstations in the PSQA process were connected, and most manual operations were automated by AutoFrame sequentially or in parallel. Results: More than 20 PSQA tasks were performed both manually and using the developed AutoFrame interface. On average, 175 (±12) manual operations of the PSQA procedure were eliminated and performed by the automated process. The time to complete a PSQA task was 8.23 (±0.78) minutes for the automated workflow, in comparison to 13.91 (±3.01) minutes needed for manual operations. Conclusion: We have developed the AutoFrame interface framework that successfully automated our PSQA procedure, and significantly reduced the time, human (control/clicking/typing) errors, and operators’ stress. Future work will focus on improving the system’s flexibility and stability and extending its operations to other QA procedures.
文摘As big data becomes an apparent challenge to handle when building a business intelligence(BI)system,there is a motivation to handle this challenging issue in higher education institutions(HEIs).Monitoring quality in HEIs encompasses handling huge amounts of data coming from different sources.This paper reviews big data and analyses the cases from the literature regarding quality assurance(QA)in HEIs.It also outlines a framework that can address the big data challenge in HEIs to handle QA monitoring using BI dashboards and a prototype dashboard is presented in this paper.The dashboard was developed using a utilisation tool to monitor QA in HEIs to provide visual representations of big data.The prototype dashboard enables stakeholders to monitor compliance with QA standards while addressing the big data challenge associated with the substantial volume of data managed by HEIs’QA systems.This paper also outlines how the developed system integrates big data from social media into the monitoring dashboard.
文摘Longitudinal joint construction quality is critical to the life of flexible pavements.Maintaining deteriorated longitudinal joints has become a challenge for many highway agencies.Improving the joint's quality through better compaction during construction can help achieve flexible pavements with longer service lives and less maintenance.Current quality control(QC)and quality assurance(QA)plans provide limited coverage.Consequently,the risk of missing areas with poor joint compaction is significant.A density profiling system(DPS)is a non-destructive alternative to conventional destructive evaluation methods.It can provide quick and continuous real-time coverage of the compaction during construction in dielectrics.The paper presents several case studies comparing various types of longitudinal joints and demonstrating the use of DPS to evaluate the joint's compaction quality.The paper shows that dielectric measurements can provide valuable insight into the ability of various construction techniques to achieve adequate levels of compaction at the longitudinal joint.The paper proposes a dielectric-based longitudinal joint quality index(LJQI)to evaluate the relative compaction of the joint during construction.It also shows that adopting DPS for assessing the compaction of longitudinal joints can minimize the risk of agencies accepting poorly constructed joints,identify locations of poor quality during construction,and achieve better-performing flexible pavements.
文摘Information security and quality management are often considered two different fields. However, organizations must be mindful of how software security may affect quality control. This paper examines and promotes methods through which secure software development processes can be integrated into the Systems Software Development Life-cycle (SDLC) to improve system quality. Cyber-security and quality assurance are both involved in reducing risk. Software security teams work to reduce security risks, whereas quality assurance teams work to decrease risks to quality. There is a need for clear standards, frameworks, processes, and procedures to be followed by organizations to ensure high-level quality while reducing security risks. This research uses a survey of industry professionals to help identify best practices for developing software with fewer defects from the early stages of the SDLC to improve both the quality and security of software. Results show that there is a need for better security awareness among all members of software development teams.
文摘Quality assurance (QA) and quality control (QC) are fundamental aspects of any laboratory measurement. However, in comparison with other medical disciplines, the need for QA and QC in laboratory andrology has been recognized only recently. Furthermore, there is evidence that the effort required to undertake QA and QC has not been wholly welcomed by some clinicians. Nevertheless, accrediting bodies and regulatory authorities increasingly require evidence that laboratories have effective QA and QC measures in place because both are central to the quality management processes. Following the publication of the 5th edition of the World Health Organization Laboratory Manual, existing QA and QC systems will need to be updated to take into account some of the methodological changes recommended by the manual. Three of these are discussed in this commentary; they relate to: (i) the move to infer semen volume from its weight; (ii) the re-classification of sperm motility grades from four to three; and (iii) the publication of a lower reference limit for morphology of 4% (with a corresponding 95% confidence interval of 3%-4%). The importance of QA and QC in all laboratory tests, including up and coming new tests to assess sperm DNA integrity, is discussed. The need for adequate initial training and continuing professional development programmes to support laboratory scientists performing andrology is also described.
基金funded by National Natural Science Foundation of China (Grant Nos. 40975013 and 40975014)Chinese Academy of Meteorological Sciences (CAMS) basic scientific and operational project:Observation and retrieval methods of microphysics and dynamic parameters of cloud and precipitation with multi-wavelength Remote Sensing,SCHeREX and TWPOR
文摘A mobile C-band dual polarimetric weather radar J type (PCDJ), which adopts simultaneous transmission and simultaneous reception (STSR) of horizontally and vertically polarized signals, was first developed in China in 2008. It was deployed in the radar observation plan in the South China Heavy Rainfall Experiment (SCHeREX) in the summer of 2008 and 2009, as well as in Tropical Western Pacific Ocean Observation Experiments and Research on the Predictability of High Impact Weather Events from 2008 to 2010 in China (TWPOR). Using the observation data collected in these experiments, the radar systematic error and its sources were analyzed in depth. Meanwhile an algorithm that can smooth differential propagation phase (~Dp) for estimating the high-resolution specific differential phase (KDP) was developed. After attenuation correction of reflectivity in horizontal polarization (ZH) and differential reflectivity (ZDR) of PCDJ radar by means of KDP, the data quality was improved significantly. Using quality-controlled radar data, quantitative rainfall estimation was performed, and the resutls were compared with rain-gauge measurements. A synthetic ZH /KDp-based method was analyzed. The results the traditional ZH-based method when the rain suggest that the synthetic method has the advantage over rate is 〉5 mm h^-1. The more intensive the rain rates, the higher accuracy of the estimation.
文摘As developing countries become more involved in the international chemical trade, they must adhere to certain requirements for importation of their chemicals into foreign countries. These developing countries will be required to provide basic safety information on their chemical products, including data developed from chemical and toxicologic testing. These data must be developed in accordance with the national requirements of the importing country. Many importing countries have adopted the OECD Test Guidelines and the OECD Principles of Good Laboratory Practice (GLP) as primary guidance to assure the quality of laboratory data. These procedures provide a basis for internationally acceptable data. Several countries have incorporated many of these provisions into their national laws or administrative procedures. These procedures describe the process of documenting the conduct of laboratory studies, including recording of data, reporting of study results, and storage of data gathered. This process is intended to assure the quality and integrity of the data so that, if required, the study can be reconstructed by an auditor or an inspector. Details of these procedures and their applicability to the international chemical trade are discussed. 1989 Academic Press, Inc.
文摘This paper presents a broad range of suggestions on the concept of quality-assured industry-oriented higher education in software engineering,a central theme of the annual CEISIE(CEISEE this year) workshops since the first one held in Harbin,China,in 2005.It draws on the lessons of collaborative experiences involving academics and industrialists from Europe and China.These experiences make the case for a strong role for software industryoriented higher education in the production of the software architects,developers and engineers required for the future.
文摘Purpose: To test the concept of Statistical Process Control (SPC) as a Quality Assurance (QA) procedure for dose verifications in external beam radiation therapy in conventional and 3D Conformal Radiotherapy (3D-CRT) treatment of cervical cancer. Materials and Methods: A study of QA verification of target doses of 198 cervical cancer patients undergoing External Beam Radiotherapy (EBRT) treatments at two different cancer treatment centers in Kenya was conducted. The target doses were determined from measured entrance doses by the diode in vivo dosimetry. Process Behavior Charts (PBC) developed by SPC were applied for setting Action Thresholds (AT) on the target doses. The AT set was then proposed as QA limits for acceptance or rejection of verified target doses overtime of the EBRT process. Result and Discussion: Target doses for the 198 patients were calculated and SPC applied to test whether the action limits set by the Process Behavior Charts could be applied as QA for verified doses in EBRT. Results for the two sub-groups of n = 3 and n = 4 that were tested produced action thresholds which are within clinical dose specifications for both conventional AP/PA and 3D-CRT EBRT treatment techniques for cervical cancer. Conclusion: Action thresholds set by SPC were within the clinical dose specification of ±5% uncertainty for both conventional AP/PA and 3D-CRT EBRT treatment techniques for cervical cancer. So the concept of SPC could be applied in setting QA action limits for dose verifications in EBRT.
文摘Automatic monitoring data of pollution sources is an important basis for environmental supervision and management.At present,it is difficult to guarantee the quality of automatic monitoring data of pollution sources,and it is difficult to play the role of the monitoring data.In response to this problem,the factors influencing the quality of automatic monitoring data of pollution sources were analyzed in detail,and technical assurance measures for the quality of automatic monitoring data of pollution sources in Shandong Province were studied.Besides,the dynamic management and control idea of automatic monitoring of pollution sources was proposed,and specific technical measures were analyzed from five aspects of standardizing automatic monitoring equipment of pollution sources,improving the data collection and transmission system,establishing a mechanism for reporting operating status information of monitoring equipment,setting alarm rules and alarm processing procedures,and statistically analyzing the operating status of the equipment.Practice has proved that the dynamic management and control system can effectively ensure the quality of automatic monitoring data of pollution sources.