Reliability analysis of retractable drill bit with air reverse circulation used for drilling while casing

Casing-while-drilling(CWD)with down the hole(DTH)hammer drilling technology has been widely used in unconsolidated formations,due to its advantages in protecting the borehole wall,excellent rock cuttings capacity,and fast penetration rate in hard rock.As an important component of the CWD system,the structure of the retractable drill bit needs not only to ensure to form stronger reverse circulation,but also to be expandable or retractable as needed,otherwise the drill bit cannot be lift and put down smoothly in the casing,and may lead to drilling accidents.This paper developed a new type of reverse circulation DTH hammer drill bit used for CWD drilling technology.The retractable performance of this type of drill bit is studied using ADAMS software.The results show that it is smoothly expandable and retractable as designed under the conditions of the weight of the bit(WOB)of 0.5–2.0 t and the rotation speed of 30–60 r/min.To investigate the reverse circulation effect of the drill bit,Fluent software was used to simulate the flow characteristic inside it.The simulation results indicated that it can form strong reverse circulation,and the entrainment ratio h can reach 9.5%.

Reverse Circulation DTH Hammer Drilling Technique

The technical characteristics and operational principal of the reverse circulation DTH hammer drilling technology is integrated introduced in this paper. Using simulation technology to assist the drilling tool design, the optimum designed DTH hammer gets stable performance, and the bit has reverse circulation ability, and further more, it has already developed serial products. The reverse circulation DTH hammer drilling technique has been fully applied in field such as the geological core exploration in complex strata, water well drilling, and large diameter rock embedding piles drilling in hard rock, and obviously, it is achieved favorable economic and social benefits.

Calculation of flow distribution in air reverse circulation bit interior fluid field by simplifying air flow model

By simplifying the characters in the air reverse circulation bit interior fluid field, the authors used air dynamics and fluid mechanics to calculate the air distribution in the bit and obtained an equation of flow distribution with a unique resolution. This study will provide help for making certain the bit parameters of the bit structure effectively and study the air reverse circulation bit interior fluid field character deeply.

Development of experimental apparatus about reverse circulation bit

A set of experimental apparatus on reverse circulation bit are developed, in order to lucubrate the mechanism of the new type reverse circulation bits, and the structure of the bits influencing the ability of taking core and carrying powder.Both the major structure of the equipment and the procession of experiment are described.

Repacking practice for G-3 engineering driller power unit with drive shaft of dual channel reverse circulation

In order to satisfy operating requirements for constant core drilling technology in reverse circulation with hollow-through DTH,the power unit of G-3 engineering driller was ameliorated. The new one with dual channel drive shaft, achieved the perfect assemble with transmission structure of the original power unit. It could interconvert according to need by using two sets of drive shafts with direct and reverse circulation. The repacked G-3 engineering driller carried on experiment in the field test in Luanchuan molybdenum mine of Henan, whose effect was very good.

Optimization of reverse circulation bit based on field experiment

By field experiment in Sandaozhuang W-Mo mining area in Luanchuan of Henan Province, the authors analyzed the Experimental result of reverse circulation bit on the basis of different structures and obtained the following conclusion: the design parameter of reverse circulation bit, the number, diameter and angle of the spurt hole can influence on the reverse circulation effect. The bit with inner spurt hole is better obviously than that one without inner spurt hole in reverse circulation, one or two right and the best choice of inner spurt hole is that the diameter is Φ8, the angle is 30° dip up and the suitable number is two to three.

Numerical simulation and experimental research on air reverse circulation bit interior fluid territory

By using fluent fluid engineer emulator software to simulate negative pressure formed inside the injector added in the reverse-circulation sampling drilling bit, at six angles of 15, 30, 45, 60, 75 and 90 degrees. The pressure distributing nephogram and the corresponding numerical value gotten compared with the experiment data received by an injector with 6 angles designed by emulation the conclusion. It has been found that the two values are coincident essentially. The article shows that using emulator technology to design optimizely is credible and simple. The cost is low and the design cycle is short compared with the method through experience and test.

Air flow calculation of reverse circulation drilling technique with air DTH hammer

Air DTH hammer has been successfully applied in minor-caliber solid mineral exploration,water-well drilling and other drilling areas. In order to expand the applications of the technology,the authors further studied the principle and analyzed the mechanism of reverse circulation drilling technique with air DTH hammer to get the perfect assembles of equipments by optimizing working parameters. No parameter seemed more important than the air volume because it could maintain the working performance stability. The minimum air volume is related to the parameters such as depth and pressure,which was calculated under the actual conditions. It was solved for the air injection flow tables of the air DTH Hammer working at the different pressures. According to the data tables,operators could adjust the air volume to meet the demand on this technique,which had a realistic guiding significance. So it could build up a set of systematic and complete hi-technique.