FIB Secondary Etching Method for Fabrication of Fine CNT Forest Metamaterials

Anisotropic materials, like carbon nanotubes(CNTs), are the perfect substitutes to overcome the limitations of conventional metamaterials; however, the successful fabrication of CNT forest metamaterial structures is still very challenging. In this study, a new method utilizing a focused ion beam(FIB) with additional secondary etching is presented, which can obtain uniform and fine patterning of CNT forest nanostructures for metamaterials and ranging in sizes from hundreds of nanometers to several micrometers. The influence of the FIB processing parameters on the morphology of the catalyst surface and the growth of the CNT forest was investigated, including the removal of redeposited material,decreasing the average surface roughness(from 0.45 to 0.15 nm), and a decrease in the thickness of the Fe catalyst.The results showed that the combination of FIB patterning and secondary etching enabled the growth of highly aligned, highdensity CNT forest metamaterials. The improvement in the quality of single-walled CNTs(SWNTs), defined by the very high G/D peak ratio intensity of 10.47, demonstrated successful fine patterning of CNT forest for the first time. With a FIB patterning depth of 10 nm and a secondary etching of 0.5 nm, a minimum size of 150 nm of CNT forest metamaterials was achieved. The development of the FIB secondary etching method enabled for the first time, the fabrication of SWNT forest metamaterials for the optical and infrared regime, for future applications, e.g., in superlenses, antennas,or thermal metamaterials.

IMPROVED METHOD FOR RNA SECONDARY STRUCTURE PREDICTION'

A simple stepwise folding process has been developed to simulate RNA secondary structure formation.Modifications for the energy parameters of various loops were included in the program.Five possible types of pseudoknots including the well known H-type pseudoknot were permitted to occur if reasonable.We have applied this approach to e number of RNA sequences.The prediction accuracies we obtained were higher than those in published papers.

Synthesis of Hydrophilic Acid-resistant Ge-ZSM-5 Membranes via Secondary Growth Method Using Silicalite-1 Zeolite as Seeds

Hydrophilic acid-resistant Ge-ZSM-5 membranes were synthesized via secondary growth method on porous a-A1203 substrates with Silicalite-1 zeolite as seeds. The membranes were characterized by means of scanning electron microscopy, X-ray diffraction and energy dispersive X-ray spectrometer to look into the microstructures and element contents of the membranes. The separation performance of the membranes was investigated for separating water from acetic acid solution by pervaporation. The results show that membranes fabricated by the conventional secondary growth method have a high flux, but the selectivity of them is rather limited. Preheating the secondary synthesis sol and using the supernatant as the secondary synthesis sol for membrane fabrication were found to be ef- fective to lower the concentration of the nutrient to constrain re-nucleation, at the same time, lower the A1 content in the membranes. The membrane obtained exhibited improved separation performance with a separation factor of 83 at a flux of 0.67 kg.rn-2.h-1 at 353 K for a feed concentration of 98% acetic acid solution.

Red Tide Information Extraction Based on Multi-source Remote Sensing Data in Haizhou Bay

[Objective] The aim was to extract red tide information in Haizhou Bay on the basis of multi-source remote sensing data.[Method] Red tide in Haizhou Bay was studied based on multi-source remote sensing data,such as IRS-P6 data on October 8,2005,Landsat 5-TM data on May 20,2006,MODIS 1B data on October 6,2006 and HY-1B second-grade data on April 22,2009,which were firstly preprocessed through geometric correction,atmospheric correction,image resizing and so on.At the same time,the synchronous environment monitoring data of red tide water were acquired.Then,band ratio method,chlorophyll-a concentration method and secondary filtering method were adopted to extract red tide information.[Result] On October 8,2005,the area of red tide was about 20.0 km2 in Haizhou Bay.There was no red tide in Haizhou bay on May 20,2006.On October 6,2006,large areas of red tide occurred in Haizhou bay,with area of 436.5 km2.On April 22,2009,red tide scattered in Haizhou bay,and its area was about 10.8 km2.[Conclusion] The research would provide technical ideas for the environmental monitoring department of Lianyungang to implement red tide forecast and warning effectively.