Numerical investigation on the caving mechanism with different standard deviations of top coal block size in LTCC

The size distribution of the broken top coal blocks is an important factor,affecting the recovery ratio and the efficiency of drawing top coal in longwall top coal caving(LTCC)mining panel.The standard deviation of top coal block size(dt)is one of the main parameters to reflect the size distribution of top coal.To find the effect of dt on the caving mechanism,this study simulates experiments with 9 different dt by using discrete element software PFC.The dt is divided into two stages:uniform distribution stage(UDS)whose dt is less than 0.1(Schemes 1–5),and nonuniform distribution stage(NDS)whose dt is more than 0.1(Schemes 6–9).This research mainly investigates the variation of recovery ratio,drawing body shape,boundary of top coal,and contact force between particles in the two stages,respectively.The results showed that with the increasing dt,the recovery ratio of the panel increases first and then decreases in UDS.It is the largest in Scheme 3,which mainly increases the drawing volume at the side of starting drawing end.However,the recovery ratio decreases first and then increases quickly in NDS,and it is the largest in Scheme 9,where the drawing volume at the side of finishing drawing end are relatively higher.In UDS,the major size of top coal is basically medium,while in NDS,the size varies from medium to small,and then to large,with a distinct difference in shape and volume of the drawing body.When the major size of top coal is medium and small,the cross-section width of the initial boundary of top coal at each height is relatively small.Conversely,when the top coal size is large,the initial boundary of top coal has a larger opening range,the rotating angle of lower boundary is relatively small in the normal drawing stage,which is conducive to the development of drawing body and reduces the residual top coal,and the maximum particle velocity and the particles movement angle are both larger.This study lays a foundation for the prediction of recovery ratio,and suggests that the uniform top coal is more manageable and has a larger recovery ratio.

Introducing tree neighbouring relationship factors in forest pattern spatial analysis:weighted Delaunay triangulation method

It is important to quantify and analyze forest spatial patterns for studying biological characteristics,population interaction and the relationship between the population and environment.In this study,the forest spatial structure unit was generated based on the Delaunay triangulation model(DTM),and the weights were generated using the comprehensive values of the tree diameter at breast height,total height and crown width.The distance between neighbors determined by the DTM was weighted to transform the original coordinates of trees into logical coordinates.Then,a weighted spatial pattern(WSP)was developed.After weighting,the neighboring trees were replaced,the replacement ratio was 38.3%,and there was 57.4%of the central tree.Correlation analysis showed that the uniform angle index of the WSP was significantly correlated with the tree size standard deviation under uniformity(r=0.932)and randomness(r=0.711).The DTM method not only considers the spatial distance between trees,but also considers the non-spatial attributes of trees.By changing the spatial topological relation between trees,this method further improves the spatial structure measurement of forest.

An accurate measurement of PMT TTS based on the photoelectron spectrum

The water Cherenkov detector array（WCDA） for the Large High Altitude Air Shower Observatory（LHAASO） will employ more than 3600 hemisphere 8-inch photomultiplier tubes（PMTs）. Good time performance of the PMT, especially the transit time spread（TTS）, is required for the WCDA. In order to meet the demand of the WCDA experiment, an accurate measurement of PMT TTS based on the photoelectron spectrum is studied. The method is appropriate for multi-photoelectrons and makes it possible to measure the TTS of different photoelectrons simultaneously. The TTS of different photoelectrons for a Hamamatsu R5912 PMT is tested with a specially designed divider circuit. The relationship between TTS and number of photoelectrons is also presented in this paper.