Multi-frictional disks are employed to transmit the torque in speeding wetclutch, and the oil thickness within frictional disks could be adjusted for practical outputspeeding. As oil combined with alpha-hydrocarbon or...Multi-frictional disks are employed to transmit the torque in speeding wetclutch, and the oil thickness within frictional disks could be adjusted for practical outputspeeding. As oil combined with alpha-hydrocarbon or polyester is getting widely used as lubricantand the speeding wet clutch works within hydrodynamic lubrication, mixture lubrication, boundarylubrication and contact situation, established the thermal analysis model for investigating thebehavior of frictional disks in speeding wet clutch, which covers the power-law fluid model,Patir-Cheng average flow model, GT asperity contact model, oil film inertia and heat effects, meanenergy equation, and heat conduction equation. The formulas in the model are deduced. The numeralcalculation and analysis for hydrodynamic lubrication and mixture lubrication are executed.Relationships and variations among transmitting torque, mean push pressure, output speed, and loadare presented. Thermal effect should be considered during the hydrodynamic lubrication and largertransmitting torque makes earlier entrance to mixture lubrication.展开更多
China is the main silk producer in the world,whose RSS (Raw Silk Standard) is widely approved in international trade. After entering WTO, China needs to revise the RSS according to the changes of silk industry and dev...China is the main silk producer in the world,whose RSS (Raw Silk Standard) is widely approved in international trade. After entering WTO, China needs to revise the RSS according to the changes of silk industry and develop advanced electronic testing system and improve testing means, so as to promote the internationlization of the RSS.展开更多
In recent years, the subcontracting production for foreign trade of the Xi’an Aviation Engine Company (XAEC), a foreign trade production base of China, has achieved rapid development. In 1994, the company’s export e...In recent years, the subcontracting production for foreign trade of the Xi’an Aviation Engine Company (XAEC), a foreign trade production base of China, has achieved rapid development. In 1994, the company’s export earnings from foreign trade made a breakthrough at US$11 million, and it was commended by the State Economic展开更多
To introduce foreign capital for the municipal highway construction is a great measure to meet the development of the socialist market economy and to reform the investment system for the municipal highway construction...To introduce foreign capital for the municipal highway construction is a great measure to meet the development of the socialist market economy and to reform the investment system for the municipal highway construction. The aim of the reform lies in taking the construction and management of the municipal highway facilities as an industry to operate, widening the investment channel of the municipal highway construction and gradually forming a benign cycle of investment-construc-展开更多
According to customs statistics, China’s exports of machinery and electric products in 1996 were worth US$ 48.21 billion, an increase of 9.9 percent over the preceding year, and 8.4 percent higher than the growth rat...According to customs statistics, China’s exports of machinery and electric products in 1996 were worth US$ 48.21 billion, an increase of 9.9 percent over the preceding year, and 8.4 percent higher than the growth rate of the nation’s total exports. The proportion of machinery and electric product exports in the nation’s total foreign trade volume\ increased from 29.5 percent in 1995 to 31.9 percent in 1996, a growth at 2.4 percent.展开更多
Housing isone of the necessities of humansfor existence and development.The Chinese government hasalways attached great importanceto housing construction;especially in recent years,thepriority development of housingco...Housing isone of the necessities of humansfor existence and development.The Chinese government hasalways attached great importanceto housing construction;especially in recent years,thepriority development of housingconstruction has been seen inthe real estate and propertiesindustry.Hou Jie,Minister ofConstruction,not long ago wrotean article summarizing theachievements made in this sectorand drawing a blueprint forspeedup of housing constructionand the improvement of livingconditions in the future.It willprovide a vast vista for thedevelopment of China’s buildingindustry and its internationalcooperation.展开更多
High-speed railways have the merits of high speed, high transport capacity, low consumption of energy, less pollution, less occupation of land, and greater safety. The development of high-speed railways is suitable fo...High-speed railways have the merits of high speed, high transport capacity, low consumption of energy, less pollution, less occupation of land, and greater safety. The development of high-speed railways is suitable for the national conditions in China.The authors suggest that, with the Hu-Ning (Shanghai-Nanjing) section of the Jing-Hu (Beijing-Shanghai) Railway as the starting point, a high-speed dedicated passenger railway line be built to realize the separate transportation of passengers and goods, thus easing the strain on transport in East China, accumulating experience for the future development of high-speed railways, and bringing along the development of high and new technology industries.展开更多
This paper discusses the urgency to further develop China’s space technological industry;analyzes the gaps between China and other advanced countries in space industry,including technological level,development scale,...This paper discusses the urgency to further develop China’s space technological industry;analyzes the gaps between China and other advanced countries in space industry,including technological level,development scale,application scope and investment;describes the current severe situation that the China’s space industry is faced with and proposes the overall objective,guiding principles and major tasks of China’s space technological sector in the Ninth-Five Year Plan and the coming decade.Finally,it proposes some policies and effective measures to speed up the development of China’s space industry to meet the challenge in the 21st century.展开更多
Speeding in a work zone needs to be tackled effectively to enhance work zone safety. This study evaluates the influence of three different work zone signs—speed photo enforced signs, dynamic speed display signs and r...Speeding in a work zone needs to be tackled effectively to enhance work zone safety. This study evaluates the influence of three different work zone signs—speed photo enforced signs, dynamic speed display signs and reduced speed limit signs—on driver speeding behavior using a medium-fidelity driving simulator. The speed photo enforced and reduced speed limit signs were placed at intervals before the start of the work zone and in the work zone. A virtual work zone network was built to replicate the Baltimore–Washington Parkway(MD-295). A total of 66 participants from different socioeconomic backgrounds participated in 264 driving simulation sessions. The speeds were measured over four phases: initial speed area, sign visible area, sign readable area and post sign area. An analysis of variance and post hoc analysis showed that the speed photo enforced sign was the most effective of the three signs. The second speed photo enforced sign within the work zone was more effective at reducing speed than the sign before the start of the work zone, especially in the post sign area. It was observed that female participants tend to slow down more when encountering a speed photo enforcement sign.展开更多
The present research aimed to identify critical factors that affect speeding behavior.For that purpose,high-resolution smartphone data collected from a naturalistic driving experiment of 88 drivers were utilized,augme...The present research aimed to identify critical factors that affect speeding behavior.For that purpose,high-resolution smartphone data collected from a naturalistic driving experiment of 88 drivers were utilized,augmented with data from self-reported questionnaires.Using risk exposure and driving behavior indicators calculated from smartphone sensor data,as well as demographic characteristics and self-reported driving performance,statistical analysis was carried out for modelling the percentage of driving time over the speed limit,namely by means of generalized linear mixed-effects models.More precisely,an overall model was developed for all road environments,and additional separate models were developed for driving on urban and rural roads.The results from the interpretation of the estimated parameters of the models can be summarized as follows:the parameters of trip distance and mobile phone use while driving have been determined as statistically significant and positively correlated with the percentage of speeding time during a driver's trip.In the same context,male drivers and drivers in the age group of18-34 also increase the percentages of speeding instances while driving.Regarding driving behavior as stated on the questionnaire,it seems that low frequencies of self-declared speeding(never or rarely)are statistically significant and negatively correlated with the percentage of speeding time.It is expected that this research can provide considerable gains to society,since the stakeholders including policy makers and industry could rely on the results and recommendations regarding risk factors that appear to be critical for safe driving.展开更多
Dear Editor,This letter addresses the resilient distributed cooperative control problem of a virtually coupled train convoy under stochastic disturbances and cyber attacks.The main purpose is to achieve distributed co...Dear Editor,This letter addresses the resilient distributed cooperative control problem of a virtually coupled train convoy under stochastic disturbances and cyber attacks.The main purpose is to achieve distributed coordination of virtually coupled high-speed trains with the prescribed inter-train distance and same cruise velocity.展开更多
Cavitation is a common issue in pumps,causing a decrease in pump head,a fall in volumetric efficiency,and an intensification of outlet flow pulsation.It is one of the main hazards that affect the regular operation of ...Cavitation is a common issue in pumps,causing a decrease in pump head,a fall in volumetric efficiency,and an intensification of outlet flow pulsation.It is one of the main hazards that affect the regular operation of the pump.Research on pump cavitation mainly focuses on mixed flow pumps,jet pumps,external spur gear pumps,etc.However,there are few cavitation studies on external herringbone gear pumps.In addition,pumps with different working principles significantly differ in the flow and complexity of the internal flow field.Therefore,it is urgent to study the cavitation characteristics of external herringbone gear pumps.Compared with experimentalmethods,visual research and cavitation area identification are achieved through computation fluid dynamic(CFD),and changing the boundary conditions and shape of the gear rotor is easier.The simulation yields a head error of only 0.003%under different grid numbers,and the deviation between experimental and simulation results is less than 5%.The study revealed that cavitation causes flow pulsation at the outlet,and the cavitation serious area is mainly distributed in the meshing gap and meshing area.Cavitation can be inhibited by reducing the speed,increasing the inlet pressure,and changing the helix angle can be achieved.For example,when the inlet pressure is 5 bar,the maximumgas volume fraction in themeshing area is less than 50%.These results provide a reference for optimizing the design and finding the optimal design parameters to reduce or eliminate cavitation.展开更多
The maintenance of sand-fixing vegetation is important for the stability of artificial sand-fixing systems in which seed dispersal plays a key role.Based on field wind tunnel experiments using 11 common plant species ...The maintenance of sand-fixing vegetation is important for the stability of artificial sand-fixing systems in which seed dispersal plays a key role.Based on field wind tunnel experiments using 11 common plant species on the southeastern edge of the Tengger Desert,China,we studied the secondary seed dispersal in the fixed and semi-fixed sand dunes as well as in the mobile dunes in order to understand the limitations of vegetation regeneration and the maintenance of its stability.Our results indicated that there were significant variations among the selected 11 plant species in the threshold of wind speed(TWS).The TWS of Caragana korshinskii was the highest among the 11 plant species,whereas that of Echinops gmelinii was the lowest.Seed morphological traits and underlying surface could generally explain the TWS.During the secondary seed dispersal processes,the proportions of seeds that did not disperse(no dispersal)and only dispersed over short distance(short-distance dispersal within the wind tunnel test section)were significantly higher than those of seeds that were buried(including lost seeds)and dispersed over long distance(long-distance dispersal beyond the wind tunnel test section).Compared with other habitats,the mobile dunes were the most difficult places for secondary seed dispersal.Buried seeds were the easiest to be found in the semi-fixed sand dunes,whereas fixed sand dunes were the best sites for seeds that dispersed over long distance.The results of linear mixed models showed that after controlling the dispersal distance,smaller and rounder seeds dispersed farther.Shape index and wind speed were the two significant influencing factors on the burial of seeds.The explanatory power of wind speed,underlying surface,and seed morphological traits on the seeds that did not disperse and dispersed over short distance was far greater than that on the seeds that were buried and dispersed over long distance,implying that the processes and mechanisms of burial and long-distance dispersal are more complex.In summary,most seeds in the study area either did not move,were buried,or dispersed over short distance,promoting local vegetation regeneration.展开更多
To investigate the thermal and mechanical behavior of casting wheel,a two-dimensional thermoelastic-plastic finite element model was used to predict the temperature,stress and distortion distribution of the casting wh...To investigate the thermal and mechanical behavior of casting wheel,a two-dimensional thermoelastic-plastic finite element model was used to predict the temperature,stress and distortion distribution of the casting wheel during the wheel and belt continuous casting process.The effects of grinding thickness and casting speed on the thermal and mechanical behaviors of the center of the hot face of the casting wheel were discussed in detail.In each rotation,the casting wheel passes through four different spray zones.The results show that the temperature distribution of the casting wheel in different spray zones is similar,the temperature of the hot face is the highest and the temperature reaches the peak in the spray zoneⅢ.The stress and distortion depend on the temperature distribution,and the maximum stress and distortion of the hot face are 358.2 MPa and 1.82 mm,respectively.The temperature at the center of the hot face decreases with increasing grinding thickness and increases with increasing casting speed.展开更多
Speed limit measures are ubiquitous due to the complexity of the road environment,which can be supplied with the help of vehicle to everything(V2X)communication technology.Therefore,the influence of speed limit on tra...Speed limit measures are ubiquitous due to the complexity of the road environment,which can be supplied with the help of vehicle to everything(V2X)communication technology.Therefore,the influence of speed limit on traffic system will be investigated to construct a two-lane lattice model accounting for the speed limit effect during the lane change process under V2X environment.Accordingly,the stability condition and the mKdV equation are closely associated with the speed limit effect through theory analysis.Moreover,the evolution of density and hysteresis loop is simulated to demonstrate the positive role of the speed limit effect on traffic stability in the cases of strong reaction intensity and high limited speed.展开更多
Recent research in cross-domain intelligence fault diagnosis of machinery still has some problems,such as relatively ideal speed conditions and sample conditions.In engineering practice,the rotational speed of the mac...Recent research in cross-domain intelligence fault diagnosis of machinery still has some problems,such as relatively ideal speed conditions and sample conditions.In engineering practice,the rotational speed of the machine is often transient and time-varying,which makes the sample annotation increasingly expensive.Meanwhile,the number of samples collected from different health states is often unbalanced.To deal with the above challenges,a complementary-label(CL)adversarial domain adaptation fault diagnosis network(CLADAN)is proposed under time-varying rotational speed and weakly-supervised conditions.In the weakly supervised learning condition,machine prior information is used for sample annotation via cost-friendly complementary label learning.A diagnosticmodel learning strategywith discretized category probabilities is designed to avoidmulti-peak distribution of prediction results.In adversarial training process,we developed virtual adversarial regularization(VAR)strategy,which further enhances the robustness of the model by adding adversarial perturbations in the target domain.Comparative experiments on two case studies validated the superior performance of the proposed method.展开更多
The present study explores the physical and acoustic characteristics of fine sand and clay in novel seabed marine sediments from of Pakistan coastline of the Arabian Sea.The measured physical parameters included mean ...The present study explores the physical and acoustic characteristics of fine sand and clay in novel seabed marine sediments from of Pakistan coastline of the Arabian Sea.The measured physical parameters included mean grain size,mass density,bulk density,salinity,porosity,permeability,pore size and mineralogical composition.Acoustic properties,including sound speed and attenuation,in the high frequency range of 90-170 kHz were analyzed.A controlled laboratory setup with the acoustic transmission method and Fourier transform techniques was utilized to examine the sound propagation and absorption of novel seabed sediments.The standard deviation of mean sound speed in fresh water was 0.75 m/s,and attenuation was observed in the range of 0.43 to 0.61 dB/m.The mean sound velocity in sand and clay varied from 1706 to 1709 m/s and 1602 to 1608 m/s,respectively.Corresponding average attenuation was observed at 80 to 93 dB/m in sandy sediments and from 31.8 to 38.6 dB/m in clayey sediments.Sound velocity variation within sandy sediment is low,consistent with expected results,and smaller than the predicted uncertainty.However,clay sediment exhibited a positive linear correlation and low sound speed variation.Attenuation increased linearly with frequency for both sediments.Finally,the laboratory results were validated by using the Biot−Stoll model.The dispersion of sound speed in sandy and clayey sediments was consistent with the predictions of the Biot−Stoll model.Measured attenuation aligned more with Biot−Stoll model predictions due to improved permeability,tortuosity and pore size parameter fitting.展开更多
Additive friction stir deposition(AFSD)is a novel structural repair and manufacturing technology has become a research hotspot at home and abroad in the past five years.In this work,the microstructural evolution and m...Additive friction stir deposition(AFSD)is a novel structural repair and manufacturing technology has become a research hotspot at home and abroad in the past five years.In this work,the microstructural evolution and mechanical performance of the Al-Mg-Si alloy plate repaired by the preheating-assisted AFSD process were investigated.To evaluate the tool rotation speed and substrate preheating for repair quality,the AFSD technique was used to additively repair 5 mm depth blind holes on 6061 aluminum alloy substrates.The results showed that preheat-assisted AFSD repair significantly improved joint bonding and joint strength compared to the control non-preheat substrate condition.Moreover,increasing rotation speed was also beneficial to improve the metallurgical bonding of the interface and avoid volume defects.Under preheating conditions,the UTS and elongation were positively correlated with rotation speed.Under the process parameters of preheated substrate and tool rotation speed of 1000 r/min,defect-free specimens could be obtained accompanied by tensile fracture occurring in the substrate rather than the repaired zone.The UTS and elongation reached the maximum values of 164.2MPa and 13.4%,which are equivalent to 99.4%and 140%of the heated substrate,respectively.展开更多
文摘Multi-frictional disks are employed to transmit the torque in speeding wetclutch, and the oil thickness within frictional disks could be adjusted for practical outputspeeding. As oil combined with alpha-hydrocarbon or polyester is getting widely used as lubricantand the speeding wet clutch works within hydrodynamic lubrication, mixture lubrication, boundarylubrication and contact situation, established the thermal analysis model for investigating thebehavior of frictional disks in speeding wet clutch, which covers the power-law fluid model,Patir-Cheng average flow model, GT asperity contact model, oil film inertia and heat effects, meanenergy equation, and heat conduction equation. The formulas in the model are deduced. The numeralcalculation and analysis for hydrodynamic lubrication and mixture lubrication are executed.Relationships and variations among transmitting torque, mean push pressure, output speed, and loadare presented. Thermal effect should be considered during the hydrodynamic lubrication and largertransmitting torque makes earlier entrance to mixture lubrication.
文摘China is the main silk producer in the world,whose RSS (Raw Silk Standard) is widely approved in international trade. After entering WTO, China needs to revise the RSS according to the changes of silk industry and develop advanced electronic testing system and improve testing means, so as to promote the internationlization of the RSS.
文摘In recent years, the subcontracting production for foreign trade of the Xi’an Aviation Engine Company (XAEC), a foreign trade production base of China, has achieved rapid development. In 1994, the company’s export earnings from foreign trade made a breakthrough at US$11 million, and it was commended by the State Economic
文摘To introduce foreign capital for the municipal highway construction is a great measure to meet the development of the socialist market economy and to reform the investment system for the municipal highway construction. The aim of the reform lies in taking the construction and management of the municipal highway facilities as an industry to operate, widening the investment channel of the municipal highway construction and gradually forming a benign cycle of investment-construc-
文摘According to customs statistics, China’s exports of machinery and electric products in 1996 were worth US$ 48.21 billion, an increase of 9.9 percent over the preceding year, and 8.4 percent higher than the growth rate of the nation’s total exports. The proportion of machinery and electric product exports in the nation’s total foreign trade volume\ increased from 29.5 percent in 1995 to 31.9 percent in 1996, a growth at 2.4 percent.
文摘Housing isone of the necessities of humansfor existence and development.The Chinese government hasalways attached great importanceto housing construction;especially in recent years,thepriority development of housingconstruction has been seen inthe real estate and propertiesindustry.Hou Jie,Minister ofConstruction,not long ago wrotean article summarizing theachievements made in this sectorand drawing a blueprint forspeedup of housing constructionand the improvement of livingconditions in the future.It willprovide a vast vista for thedevelopment of China’s buildingindustry and its internationalcooperation.
文摘High-speed railways have the merits of high speed, high transport capacity, low consumption of energy, less pollution, less occupation of land, and greater safety. The development of high-speed railways is suitable for the national conditions in China.The authors suggest that, with the Hu-Ning (Shanghai-Nanjing) section of the Jing-Hu (Beijing-Shanghai) Railway as the starting point, a high-speed dedicated passenger railway line be built to realize the separate transportation of passengers and goods, thus easing the strain on transport in East China, accumulating experience for the future development of high-speed railways, and bringing along the development of high and new technology industries.
文摘This paper discusses the urgency to further develop China’s space technological industry;analyzes the gaps between China and other advanced countries in space industry,including technological level,development scale,application scope and investment;describes the current severe situation that the China’s space industry is faced with and proposes the overall objective,guiding principles and major tasks of China’s space technological sector in the Ninth-Five Year Plan and the coming decade.Finally,it proposes some policies and effective measures to speed up the development of China’s space industry to meet the challenge in the 21st century.
基金the Maryland State Highway Association (SHA) for its funding support throughout the study
文摘Speeding in a work zone needs to be tackled effectively to enhance work zone safety. This study evaluates the influence of three different work zone signs—speed photo enforced signs, dynamic speed display signs and reduced speed limit signs—on driver speeding behavior using a medium-fidelity driving simulator. The speed photo enforced and reduced speed limit signs were placed at intervals before the start of the work zone and in the work zone. A virtual work zone network was built to replicate the Baltimore–Washington Parkway(MD-295). A total of 66 participants from different socioeconomic backgrounds participated in 264 driving simulation sessions. The speeds were measured over four phases: initial speed area, sign visible area, sign readable area and post sign area. An analysis of variance and post hoc analysis showed that the speed photo enforced sign was the most effective of the three signs. The second speed photo enforced sign within the work zone was more effective at reducing speed than the sign before the start of the work zone, especially in the post sign area. It was observed that female participants tend to slow down more when encountering a speed photo enforcement sign.
基金co-financed by the European Union-European Regional Development Fund (ERDF)and Greek national funds through the Operational Program“Competitiveness,Entrepreneurship and Innovation” (EPAnEK)of the National Strategic Reference Framework (NSRF)-Research Funding Program:BeSmart-multi-modal driver behavior and safety support system on the basis of smartphone applications。
文摘The present research aimed to identify critical factors that affect speeding behavior.For that purpose,high-resolution smartphone data collected from a naturalistic driving experiment of 88 drivers were utilized,augmented with data from self-reported questionnaires.Using risk exposure and driving behavior indicators calculated from smartphone sensor data,as well as demographic characteristics and self-reported driving performance,statistical analysis was carried out for modelling the percentage of driving time over the speed limit,namely by means of generalized linear mixed-effects models.More precisely,an overall model was developed for all road environments,and additional separate models were developed for driving on urban and rural roads.The results from the interpretation of the estimated parameters of the models can be summarized as follows:the parameters of trip distance and mobile phone use while driving have been determined as statistically significant and positively correlated with the percentage of speeding time during a driver's trip.In the same context,male drivers and drivers in the age group of18-34 also increase the percentages of speeding instances while driving.Regarding driving behavior as stated on the questionnaire,it seems that low frequencies of self-declared speeding(never or rarely)are statistically significant and negatively correlated with the percentage of speeding time.It is expected that this research can provide considerable gains to society,since the stakeholders including policy makers and industry could rely on the results and recommendations regarding risk factors that appear to be critical for safe driving.
基金the National Natural Science Foundation of China(62303240)the Natural Science Foundation of Jiangsu Province of China(BK20230356)+1 种基金the Natural Science Research Start-Up Foundation of Recruiting Talents of Nanjing University of Posts and Telecommunications(NY222033)the Natural Science Foundation for Colleges and Universities in Jiangsu Province(22KJB120001)。
文摘Dear Editor,This letter addresses the resilient distributed cooperative control problem of a virtually coupled train convoy under stochastic disturbances and cyber attacks.The main purpose is to achieve distributed coordination of virtually coupled high-speed trains with the prescribed inter-train distance and same cruise velocity.
基金supported by a Grant(2024-MOIS35-005)of Policy-linked Technology Development Program on Natural Disaster Prevention and Mitigation funded by Ministry of Interior and Safety(MOIS,Korea).
文摘Cavitation is a common issue in pumps,causing a decrease in pump head,a fall in volumetric efficiency,and an intensification of outlet flow pulsation.It is one of the main hazards that affect the regular operation of the pump.Research on pump cavitation mainly focuses on mixed flow pumps,jet pumps,external spur gear pumps,etc.However,there are few cavitation studies on external herringbone gear pumps.In addition,pumps with different working principles significantly differ in the flow and complexity of the internal flow field.Therefore,it is urgent to study the cavitation characteristics of external herringbone gear pumps.Compared with experimentalmethods,visual research and cavitation area identification are achieved through computation fluid dynamic(CFD),and changing the boundary conditions and shape of the gear rotor is easier.The simulation yields a head error of only 0.003%under different grid numbers,and the deviation between experimental and simulation results is less than 5%.The study revealed that cavitation causes flow pulsation at the outlet,and the cavitation serious area is mainly distributed in the meshing gap and meshing area.Cavitation can be inhibited by reducing the speed,increasing the inlet pressure,and changing the helix angle can be achieved.For example,when the inlet pressure is 5 bar,the maximumgas volume fraction in themeshing area is less than 50%.These results provide a reference for optimizing the design and finding the optimal design parameters to reduce or eliminate cavitation.
基金supported by the Key R&D Program of Ningxia Hui Autonomous Region,China(2021BEG03008)the Natural Science Foundation of Ningxia Hui Autonomous Region,China(2021AAC03083).
文摘The maintenance of sand-fixing vegetation is important for the stability of artificial sand-fixing systems in which seed dispersal plays a key role.Based on field wind tunnel experiments using 11 common plant species on the southeastern edge of the Tengger Desert,China,we studied the secondary seed dispersal in the fixed and semi-fixed sand dunes as well as in the mobile dunes in order to understand the limitations of vegetation regeneration and the maintenance of its stability.Our results indicated that there were significant variations among the selected 11 plant species in the threshold of wind speed(TWS).The TWS of Caragana korshinskii was the highest among the 11 plant species,whereas that of Echinops gmelinii was the lowest.Seed morphological traits and underlying surface could generally explain the TWS.During the secondary seed dispersal processes,the proportions of seeds that did not disperse(no dispersal)and only dispersed over short distance(short-distance dispersal within the wind tunnel test section)were significantly higher than those of seeds that were buried(including lost seeds)and dispersed over long distance(long-distance dispersal beyond the wind tunnel test section).Compared with other habitats,the mobile dunes were the most difficult places for secondary seed dispersal.Buried seeds were the easiest to be found in the semi-fixed sand dunes,whereas fixed sand dunes were the best sites for seeds that dispersed over long distance.The results of linear mixed models showed that after controlling the dispersal distance,smaller and rounder seeds dispersed farther.Shape index and wind speed were the two significant influencing factors on the burial of seeds.The explanatory power of wind speed,underlying surface,and seed morphological traits on the seeds that did not disperse and dispersed over short distance was far greater than that on the seeds that were buried and dispersed over long distance,implying that the processes and mechanisms of burial and long-distance dispersal are more complex.In summary,most seeds in the study area either did not move,were buried,or dispersed over short distance,promoting local vegetation regeneration.
基金financially supported by the National Natural Science Foundation of China(Grant No.U20A20289)the Innovative Research Groups Project of the Natural Science Foundation of Hebei Province(Grant No.E2021203011)the Central Government Guides Local Science and Technology Development Fund Project(Grant No.206Z1601G)。
文摘To investigate the thermal and mechanical behavior of casting wheel,a two-dimensional thermoelastic-plastic finite element model was used to predict the temperature,stress and distortion distribution of the casting wheel during the wheel and belt continuous casting process.The effects of grinding thickness and casting speed on the thermal and mechanical behaviors of the center of the hot face of the casting wheel were discussed in detail.In each rotation,the casting wheel passes through four different spray zones.The results show that the temperature distribution of the casting wheel in different spray zones is similar,the temperature of the hot face is the highest and the temperature reaches the peak in the spray zoneⅢ.The stress and distortion depend on the temperature distribution,and the maximum stress and distortion of the hot face are 358.2 MPa and 1.82 mm,respectively.The temperature at the center of the hot face decreases with increasing grinding thickness and increases with increasing casting speed.
基金Project supported by the Guangxi Natural Science Foundation,China(Grant No.2022GXNSFDA035080)the Central Government Guidance Funds for Local Scientific and Technological Development,China(Grant No.Guike ZY22096024)the National Natural Science Foundation,China(Grant No.61963008).
文摘Speed limit measures are ubiquitous due to the complexity of the road environment,which can be supplied with the help of vehicle to everything(V2X)communication technology.Therefore,the influence of speed limit on traffic system will be investigated to construct a two-lane lattice model accounting for the speed limit effect during the lane change process under V2X environment.Accordingly,the stability condition and the mKdV equation are closely associated with the speed limit effect through theory analysis.Moreover,the evolution of density and hysteresis loop is simulated to demonstrate the positive role of the speed limit effect on traffic stability in the cases of strong reaction intensity and high limited speed.
基金Shanxi Scholarship Council of China(2022-141)Fundamental Research Program of Shanxi Province(202203021211096).
文摘Recent research in cross-domain intelligence fault diagnosis of machinery still has some problems,such as relatively ideal speed conditions and sample conditions.In engineering practice,the rotational speed of the machine is often transient and time-varying,which makes the sample annotation increasingly expensive.Meanwhile,the number of samples collected from different health states is often unbalanced.To deal with the above challenges,a complementary-label(CL)adversarial domain adaptation fault diagnosis network(CLADAN)is proposed under time-varying rotational speed and weakly-supervised conditions.In the weakly supervised learning condition,machine prior information is used for sample annotation via cost-friendly complementary label learning.A diagnosticmodel learning strategywith discretized category probabilities is designed to avoidmulti-peak distribution of prediction results.In adversarial training process,we developed virtual adversarial regularization(VAR)strategy,which further enhances the robustness of the model by adding adversarial perturbations in the target domain.Comparative experiments on two case studies validated the superior performance of the proposed method.
基金financially supported by the National Natural Science Foundation of China(Grant No.12074088).
文摘The present study explores the physical and acoustic characteristics of fine sand and clay in novel seabed marine sediments from of Pakistan coastline of the Arabian Sea.The measured physical parameters included mean grain size,mass density,bulk density,salinity,porosity,permeability,pore size and mineralogical composition.Acoustic properties,including sound speed and attenuation,in the high frequency range of 90-170 kHz were analyzed.A controlled laboratory setup with the acoustic transmission method and Fourier transform techniques was utilized to examine the sound propagation and absorption of novel seabed sediments.The standard deviation of mean sound speed in fresh water was 0.75 m/s,and attenuation was observed in the range of 0.43 to 0.61 dB/m.The mean sound velocity in sand and clay varied from 1706 to 1709 m/s and 1602 to 1608 m/s,respectively.Corresponding average attenuation was observed at 80 to 93 dB/m in sandy sediments and from 31.8 to 38.6 dB/m in clayey sediments.Sound velocity variation within sandy sediment is low,consistent with expected results,and smaller than the predicted uncertainty.However,clay sediment exhibited a positive linear correlation and low sound speed variation.Attenuation increased linearly with frequency for both sediments.Finally,the laboratory results were validated by using the Biot−Stoll model.The dispersion of sound speed in sandy and clayey sediments was consistent with the predictions of the Biot−Stoll model.Measured attenuation aligned more with Biot−Stoll model predictions due to improved permeability,tortuosity and pore size parameter fitting.
基金financially supported by Science and Technology Major Project of Changsha,China(No.kh2401034)the Fundamental Research Funds for the Central Universities of Central South University(No.CX20230182)the National Key Research and Development Project of China(No.2019YFA0709002)。
文摘Additive friction stir deposition(AFSD)is a novel structural repair and manufacturing technology has become a research hotspot at home and abroad in the past five years.In this work,the microstructural evolution and mechanical performance of the Al-Mg-Si alloy plate repaired by the preheating-assisted AFSD process were investigated.To evaluate the tool rotation speed and substrate preheating for repair quality,the AFSD technique was used to additively repair 5 mm depth blind holes on 6061 aluminum alloy substrates.The results showed that preheat-assisted AFSD repair significantly improved joint bonding and joint strength compared to the control non-preheat substrate condition.Moreover,increasing rotation speed was also beneficial to improve the metallurgical bonding of the interface and avoid volume defects.Under preheating conditions,the UTS and elongation were positively correlated with rotation speed.Under the process parameters of preheated substrate and tool rotation speed of 1000 r/min,defect-free specimens could be obtained accompanied by tensile fracture occurring in the substrate rather than the repaired zone.The UTS and elongation reached the maximum values of 164.2MPa and 13.4%,which are equivalent to 99.4%and 140%of the heated substrate,respectively.