This paper presents a comparison study of two models for predicting the strength of rotor spun cotton yarns from fiber properties.The adaptive neuro-fuzzy system inference(ANFIS) and Multiple Linear Regression models ...This paper presents a comparison study of two models for predicting the strength of rotor spun cotton yarns from fiber properties.The adaptive neuro-fuzzy system inference(ANFIS) and Multiple Linear Regression models are used to predict the rotor spun yarn strength.Fiber properties and yarn count are used as inputs to train the two models and the count-strength-product(CSP) was the target.The predictive performances of the two models are estimated and compared.We found that the ANFIS has a better predictive power in comparison with linear multiple regression model.The impact of each fiber property is also illustrated.展开更多
On the base of literature review and the analysis of yarn properties, yarn structure and some other facts, the abrasion resistance of both rotor spun yarn and ring spun yarns are discussed. The results show that with ...On the base of literature review and the analysis of yarn properties, yarn structure and some other facts, the abrasion resistance of both rotor spun yarn and ring spun yarns are discussed. The results show that with the same raw material and twist, the rotor spun yarn has lower abrasion resistance than that of ring spun yarn, because of the higher twist employed, the abrasion resistance of rotor spun yarn is higher than that of ring spun yarn.展开更多
This paper described the physical behaviour of three types of denim cloths produced from rotor yarn, ring yarn and modified rotor yarn (prepared by adding conventional twist to rotor yarn) respectively. Experimental w...This paper described the physical behaviour of three types of denim cloths produced from rotor yarn, ring yarn and modified rotor yarn (prepared by adding conventional twist to rotor yarn) respectively. Experimental work showed that denim cloth produced from the modified rotor yarn has superior properties over conventional rotor yarn in terms of surface texture and appearance,tearing strength and resistance to abrasion.展开更多
The lower strength of friction spun yarns has became a key problem that hinder the develop-ment of friction spinning,especially in high speeds and fine yarns.In this paper a project aimed atincreasing the strength of ...The lower strength of friction spun yarns has became a key problem that hinder the develop-ment of friction spinning,especially in high speeds and fine yarns.In this paper a project aimed atincreasing the strength of friction spun yarns by using a false twist process has been made.In re-ported experiment false twist was inserted into the yarn which has been formed on a friction spin-ning machine,so that it made the yarn untwist at first,then regain the twist.In the meantime draftwas applied to generate more tension than that which had been experienced during yarn formationon the friction spinning machine.It made the yarn reforming and the loosely bound fibres in thefriction spun yarn formed due to extremely low tension on the friction spinning machine becametighter.Results indicate that with the proper draft,tension and false twist the tenacity of processedyarn will increase more than 10%.This project is an attempt to discover whether improvements can be made and whether it isworth pursuing research into modifications of yarn structure.The results imply that if the yarntension can be raised during yarn formation on the friction spinning machine or a chance is offeredto the yarn to reform after the yarn formation the yarn tenacity will be increased obviously.展开更多
The rotor spun yarn(OE yarn),twist of which is calledlayering twist,was added a few involving twist,and itsstructure and properties were measured.The experimen-tal results have shown that the morphological structure o...The rotor spun yarn(OE yarn),twist of which is calledlayering twist,was added a few involving twist,and itsstructure and properties were measured.The experimen-tal results have shown that the morphological structure ofthe rotor spun yarn with modified twist was changed andits tensile properties and abrasion resistance were im-proved.展开更多
According to the yarn forming characteristics in friction spinning, the arrangement of fed sliver is designed, to get the desired fiber distribution in the resultant yarn. On the base of that, the relation between the...According to the yarn forming characteristics in friction spinning, the arrangement of fed sliver is designed, to get the desired fiber distribution in the resultant yarn. On the base of that, the relation between the theoretical fibre distribution and the actual fibre distribution is analyzed by use of electron microscope.展开更多
Generally, ring spun yarns are manufactured from roving which is produced by roving frame. In this paper, an experiment has been done producing ring spun cotton yarn directly from finisher drawn sliver eliminatin...Generally, ring spun yarns are manufactured from roving which is produced by roving frame. In this paper, an experiment has been done producing ring spun cotton yarn directly from finisher drawn sliver eliminating the roving frame. Total 3 types of yarn with the various linear density of 8 Ne, 10 Ne & 12 Ne were produced using a roving frame and without using a roving frame. In the next step, physical and mechanical properties of those yarns including unevenness, imperfections, hairiness & tenacity were investigated. The result showed that ring spun cotton yarns produced from sliver exhibited inferior physical and mechanical properties compared with samples from the conventional ring spinning system.展开更多
A model was deveIoped to investigate impregnation behavior of thermoplastic resin into filament bundle based on Darcy's law. Consolidation processes of unidirectional laminate were performed to evaluate the validi...A model was deveIoped to investigate impregnation behavior of thermoplastic resin into filament bundle based on Darcy's law. Consolidation processes of unidirectional laminate were performed to evaluate the validity of the model. Friction spun core yarns were used in the experiments with polypropylene fiber sheath and glass filament core. The processing conditions, such as temperature and pressure, and filament parameters were taken into consideration. A good agreement was found between theoretical prediction and experiment data.展开更多
This paper studies rotor spinning blended yarn produced of spun silk and cashmere.Nine samples were spun,from three different opening rollers and different navels.According to the Uster test results of yarn quality pr...This paper studies rotor spinning blended yarn produced of spun silk and cashmere.Nine samples were spun,from three different opening rollers and different navels.According to the Uster test results of yarn quality properties,optimum selection is done by using analysis method of combining fuzzy decision-making and fuzzy pattern classification.Experimental plan is designed based on universal rotated experimental design,and the method of confined optimization is used to optimize the speed of opening roller,the speed of rotor and twist factor,according to the results of yarn quality test by Uster.展开更多
Friction spun core yarn has two components: filament core and staple fiber sheath. Under axial rubbing action, the failure mode of the core yarn is the stripping of the sheath from the core. This paper introduces a me...Friction spun core yarn has two components: filament core and staple fiber sheath. Under axial rubbing action, the failure mode of the core yarn is the stripping of the sheath from the core. This paper introduces a method to test the anti - stripping property of the core yarn. With a modified Universal Testing Machine, the stripping resistance of friction spun core yarn can be continuously measured. Some factors Influencing the measurements are discussed in detail. The testing results are compared with those from a Y731 Yarn Abrasion Tester and fur - ther confirmed by weaving practice.展开更多
Consolidation of thermoplastic unidirectional(UD)lami-nate with friction spun core yarns was investigated,espe-cially the characterization of filament bundles in consoli-dation was analyzed.The results showed that the...Consolidation of thermoplastic unidirectional(UD)lami-nate with friction spun core yarns was investigated,espe-cially the characterization of filament bundles in consoli-dation was analyzed.The results showed that the bundleeffect was affected considerably by processing conditions(applied pressure and processing time).The boundaryof the bundles was disappeared under suitable processingconditions and finally an even fiber/resin distributioncould be attained.In consolidation,filament bundlesgetting close each other and resin flowing into the bundl-es occurred simultaneously,and eventually the bundleswere fully impregnated by the resin.Fiber packing den-sity in UD-laminate was the same as that of frictionspun core yarn(55%-65% in volume)and was not af-fected significantly by processing conditions under thecurrent experimental conditions.展开更多
文摘This paper presents a comparison study of two models for predicting the strength of rotor spun cotton yarns from fiber properties.The adaptive neuro-fuzzy system inference(ANFIS) and Multiple Linear Regression models are used to predict the rotor spun yarn strength.Fiber properties and yarn count are used as inputs to train the two models and the count-strength-product(CSP) was the target.The predictive performances of the two models are estimated and compared.We found that the ANFIS has a better predictive power in comparison with linear multiple regression model.The impact of each fiber property is also illustrated.
文摘On the base of literature review and the analysis of yarn properties, yarn structure and some other facts, the abrasion resistance of both rotor spun yarn and ring spun yarns are discussed. The results show that with the same raw material and twist, the rotor spun yarn has lower abrasion resistance than that of ring spun yarn, because of the higher twist employed, the abrasion resistance of rotor spun yarn is higher than that of ring spun yarn.
文摘This paper described the physical behaviour of three types of denim cloths produced from rotor yarn, ring yarn and modified rotor yarn (prepared by adding conventional twist to rotor yarn) respectively. Experimental work showed that denim cloth produced from the modified rotor yarn has superior properties over conventional rotor yarn in terms of surface texture and appearance,tearing strength and resistance to abrasion.
文摘The lower strength of friction spun yarns has became a key problem that hinder the develop-ment of friction spinning,especially in high speeds and fine yarns.In this paper a project aimed atincreasing the strength of friction spun yarns by using a false twist process has been made.In re-ported experiment false twist was inserted into the yarn which has been formed on a friction spin-ning machine,so that it made the yarn untwist at first,then regain the twist.In the meantime draftwas applied to generate more tension than that which had been experienced during yarn formationon the friction spinning machine.It made the yarn reforming and the loosely bound fibres in thefriction spun yarn formed due to extremely low tension on the friction spinning machine becametighter.Results indicate that with the proper draft,tension and false twist the tenacity of processedyarn will increase more than 10%.This project is an attempt to discover whether improvements can be made and whether it isworth pursuing research into modifications of yarn structure.The results imply that if the yarntension can be raised during yarn formation on the friction spinning machine or a chance is offeredto the yarn to reform after the yarn formation the yarn tenacity will be increased obviously.
文摘The rotor spun yarn(OE yarn),twist of which is calledlayering twist,was added a few involving twist,and itsstructure and properties were measured.The experimen-tal results have shown that the morphological structure ofthe rotor spun yarn with modified twist was changed andits tensile properties and abrasion resistance were im-proved.
文摘According to the yarn forming characteristics in friction spinning, the arrangement of fed sliver is designed, to get the desired fiber distribution in the resultant yarn. On the base of that, the relation between the theoretical fibre distribution and the actual fibre distribution is analyzed by use of electron microscope.
文摘Generally, ring spun yarns are manufactured from roving which is produced by roving frame. In this paper, an experiment has been done producing ring spun cotton yarn directly from finisher drawn sliver eliminating the roving frame. Total 3 types of yarn with the various linear density of 8 Ne, 10 Ne & 12 Ne were produced using a roving frame and without using a roving frame. In the next step, physical and mechanical properties of those yarns including unevenness, imperfections, hairiness & tenacity were investigated. The result showed that ring spun cotton yarns produced from sliver exhibited inferior physical and mechanical properties compared with samples from the conventional ring spinning system.
基金Funded by the Research Fund for the Doctoral Program of High Education
文摘A model was deveIoped to investigate impregnation behavior of thermoplastic resin into filament bundle based on Darcy's law. Consolidation processes of unidirectional laminate were performed to evaluate the validity of the model. Friction spun core yarns were used in the experiments with polypropylene fiber sheath and glass filament core. The processing conditions, such as temperature and pressure, and filament parameters were taken into consideration. A good agreement was found between theoretical prediction and experiment data.
文摘This paper studies rotor spinning blended yarn produced of spun silk and cashmere.Nine samples were spun,from three different opening rollers and different navels.According to the Uster test results of yarn quality properties,optimum selection is done by using analysis method of combining fuzzy decision-making and fuzzy pattern classification.Experimental plan is designed based on universal rotated experimental design,and the method of confined optimization is used to optimize the speed of opening roller,the speed of rotor and twist factor,according to the results of yarn quality test by Uster.
文摘Friction spun core yarn has two components: filament core and staple fiber sheath. Under axial rubbing action, the failure mode of the core yarn is the stripping of the sheath from the core. This paper introduces a method to test the anti - stripping property of the core yarn. With a modified Universal Testing Machine, the stripping resistance of friction spun core yarn can be continuously measured. Some factors Influencing the measurements are discussed in detail. The testing results are compared with those from a Y731 Yarn Abrasion Tester and fur - ther confirmed by weaving practice.
文摘Consolidation of thermoplastic unidirectional(UD)lami-nate with friction spun core yarns was investigated,espe-cially the characterization of filament bundles in consoli-dation was analyzed.The results showed that the bundleeffect was affected considerably by processing conditions(applied pressure and processing time).The boundaryof the bundles was disappeared under suitable processingconditions and finally an even fiber/resin distributioncould be attained.In consolidation,filament bundlesgetting close each other and resin flowing into the bundl-es occurred simultaneously,and eventually the bundleswere fully impregnated by the resin.Fiber packing den-sity in UD-laminate was the same as that of frictionspun core yarn(55%-65% in volume)and was not af-fected significantly by processing conditions under thecurrent experimental conditions.
