Research on Dynamic and Static Test Methods for Evaluating the Poisson's Ratio of Orien ted Strand Board

In this article,dynamic method and static method of testing Poisson's ratio of OSB(Oriented Strand Board)were proposed.Through modal and static numerical analyses,the position where the transverse stress is equal to zero was determined.The binary linear regression method was applied to express the gluing position of the strain gauge as a relational express ion that depended on the length-width ratio and width-thickness ratio of the canti-lever plate.Then the longitudinal and transverse Poisson's ratios of OSB were mea sured by the given dynamic and static methods.In addition,the test results of OSB Poisson's ratio were analyzed with the probability distribution of random variables.The results showed that using the proposed dynamic method and static method,the test results for longitudinal and transverse Poisson's ratios of OSB were quite consistent,despite the gluing position of the strain gauges being different.And these OSB Poisson's ratios were accorded with that obtained by the axial tensile method and the four-point bending method.OSB longitudinal and transverse Poisson's ratios followed Weibull distribution.

Fuzzy Model Free Adaptive Control for Rotor Blade Full-Scale Static Testing

To eliminate the node traction coupling during wind turbine blade full-scale static testing,a model free adaptive control algorithm is presented based on fuzzy control performance function compensation. Based on the universal model theory,the fuzzy model free adaptive control( FMFAC) algorithm is designed by configuring the spot static testing experiences as compensation function F( ·). Then the algorithm implementation process is provided and its quick convergence is proved. Using software to establish static load coupling model of multi-nodes,simulate and verify the validity of FMFAC algorithm,which is applied to wind turbines blade full-scale static testing. The results show that the adaptive decoupling ability of FMFAC is better. The traction of four load points can stay steady and change coordinately. Process error is not over ± 6 k N. The error rate is lower than 1% in special phase.This algorithm effectively eliminates the traction coupling of the static testing process,and makes wind turbine blade testing steadily.

Analysis of the Application of Static Load Test in Bridge Bearing Capacity Testing

This article uses real engineering projects as examples to analyze how static load test technology is applied in testing the bridge-bearing capacity.The analysis covers aspects such as testing section layout,test load and efficiency coefficient,loading plan,evaluation optimization,test result modification,and result evaluation.The aim is to support the accurate detection and evaluation of bridge-bearing capacity.

Technical Analysis of Highway Bridge Static Load Test

Highway bridges are an important part of the transportation industry and can promote social economic construction and development.In actual operation,highway bridges are often damaged due to overload and natural factors,which tend to affect the safety and shorten the service life of these bridges.Assessing the overall state and performance of highway bridges is therefore a key element.Static load test,which is a type of sustainable detection experiment,has many advantages,including low cost,high efficiency,and high accuracy.In this paper,the bridge structure is analyzed through the application of theoretical calculations and relevant comparisons,so as to judge the operating state of the bridge.

Static Load Test Detection of Continuous Rigid- Frame Railway Bridge

The quality of the continuous rigid-frame railway bridge is related to the safety of train operation,so it is necessary to test its stiffness,strength,and other indicators.Static load test is a common technique for bridge inspection.This article summarizes the purpose of the static load test for a continuous rigid-frame railway bridge,including the required equipment,operation methods,etc.,and lists examples to analyze the operation process and precautions of static load test,hoping to provide reference information for relevant personnel.

Weak Fiber Bragg Grating Based Sensing System for Cryogenic Static Test of Launch Vehicle Oxygen Tank

In this paper,a weak fiber Bragg grating(WFBG)based sensing system applied to the cryogenic static test of launch vehicle oxygen tanks has been developed and the results of an evaluation are reported.A customized sensor encapsulation and installation method allow for precise strain measurement at cryogenic temperatures.The reflection peaks of series-connected WFBGs with low optical loss are obtained,ensuring high system reliability in harsh environments.The experimental results show that the maximum full-scale error is less than 0.81%full-scale error.The temperature is as low as−193℃ during the test.This study also demonstrates a practical method in which WFBG can be used to obtain critical parameters for structural monitoring in a cryogenic environment.

Mechanical properties and supporting effect of CRLD bolts under static pull test conditions

A device for supporting soft rock masses combined with a constant resistance structure characterized by constant resistance and large deformation at the end of a steel bar, known as the constant resistance and large deformation（CRLD） bolt, has recently been developed to counteract soft rock swelling that often occurs during deep mining. In order to further study the mechanical properties of the CRLD bolt, we investigated its mechanical properties by comparison with the conventional strength bolt（rebar） using static pull tests on many aspects, including supporting capacity, elongation, radial deformation, and energy absorption. The tests verified that the mechanical defects of the rebar, which include the decrease of bolt diameter, reduction of supporting capacity, and emergence and evolution of fracture until failure during the whole pull process, were caused by the Poisson＇s ratio effect. Due to the special structure set on the CRLD bolt, the bolt presents a seemingly unusual phenomenon of the negative Poisson＇s ratio effect, i.e., the diameter of the constant resistance structure increases while under-pulling. It is the very effect that ensures the extraordinary mechanical properties, including high resistance, large elongation, and strong energy absorption. According to the comparison and analysis of numerical simulation and field test, we can conclude that the CRLD bolt works better than the rebar bolt.

Application of bi-directional static loading test to deep foundations

Bi-directional static loading test adopting load cells is widely used around the world at present, with increase in diameter and length of deep foundations. In this paper, a new simple conversion method to predict the equivalent pile head load-settlement curve considering elastic shortening of deep foundation was put forward according to the load transfer mechanism. The proposed conversion method was applied to root caisson foundation in a bridge and to large diameter pipe piles in a sea wind power plant. Some new load cells, test procedure, and construction technology were adopted based on the applications to different deep foundations, which could enlarge the application scopes of bi-directional loading test. A new type of bi-directional loading test for pipe pile was conducted, in which the load cell was installed and loaded after the pipe pile with special connector has been set up. Unlike the conventional bi-directional loading test, the load cell can be reused and shows an evident economic benefit.

Structural damage identification using test static data based on grey system theory

A new structural damage identification method using limited test static displacement based on grey system theory is proposed in this paper. The grey relation coefficient of displacement curvature is defined and used to locate damage in the structure, and an iterative estimation scheme for solving nonlinear optimization programming problems based on the quadratic programming technique is used to identify the damage magnitude. A numerical example of a cantilever beam with single or multiple damages is used to examine the capability of the proposed grey-theory-based method to localize and identify damages. The factors of meas-urement noise and incomplete test data are also discussed. The numerical results showed that the damage in the structure can be localized correctly through using the grey-related coefficient of displacement curvature, and the damage magnitude can be iden-tified with a high degree of accuracy, regardless of the number of measured displacement nodes. This proposed method only requires limited static test data, which is easily available in practice, and has wide applications in structural damage detection.

Static load test and load transfer mechanism study of squeezed branch and plate pile in collapsible loess foundation

As a special geological phenomenon, the character of collapsible loess foundation is collapsible when penetrated by water. This character leads to the soil losing load bearing capacity largely and may lead to foundation failure. Pile is a popular foundation used in collapsible loess. The squeezed branch and plate pile is a new type of pile developed in recent years and has not be used in a project before. In this paper three squeezed branch and plate piles are tested in collapsible loess after immersion processing. The results may be used for reference in similar construction project, and to provide theoretical references for de- signing of the squeezed branch and plate piles in engineering practice.

Seismic performance evaluation of an infilled rocking wall frame structure through quasi-static cyclic testing

Earthquake investigations have illustrated that even code-compliant reinforced concrete frames may suffer from soft-story mechanism.This damage mode results in poor ductility and limited energy dissipation.Continuous components offer alternatives that may avoid such failures.A novel infilled rocking wall frame system is proposed that takes advantage of continuous component and rocking characteristics.Previous studies have investigated similar systems that combine a reinforced concrete frame and a wall with rocking behavior used.However,a large-scale experimental study of a reinforced concrete frame combined with a rocking wall has not been reported.In this study,a seismic performance evaluation of the newly proposed infilled rocking wall frame structure was conducted through quasi-static cyclic testing.Critical joints were designed and verified.Numerical models were established and calibrated to estimate frame shear forces.The results evaluation demonstrate that an infilled rocking wall frame can effectively avoid soft-story mechanisms.Capacity and initial stiffness are greatly improved and self-centering behavior is achieved with the help of the infilled rocking wall.Drift distribution becomes more uniform with height.Concrete cracks and damage occurs in desired areas.The infilled rocking wall frame offers a promising approach to achieving seismic resilience.

单跨两层含减震外挂墙板装配式混凝土框架拟静力试验研究

该文在对一个含减震外挂墙板平面框架(简称减震结构)以及一个作为对比的纯框架(简称抗震结构)进行混合试验的基础上,进一步对其单跨2层试验子结构进行了拟静力试验,研究了两结构在水平地震作用下的受力过程、损伤模式及减震外挂墙板对主体结构抗震性能的影响。研究结果表明:减震结构和抗震结构的破坏机制均为梁端和柱底出现塑性铰的梁铰机制,减震外挂墙板未改变主体结构的破坏模式;减震结构中,在最大层间位移角达到1/55之前,消能器呈预期的履带式滚动变形,此后由于外挂墙板的面内转动变形,消能器水平剪切变形值增加不大,且圆弧段产生明显变形;试验过程中减震外挂墙板未出现裂缝;墙板与框架间上部线连接处裂缝宽度较小,连接钢筋应变也较小,表明连接可靠;两试件均具有较好的变形能力和耗能能力;在相同位移级别下,减震结构的刚度、极限承载力和耗能能力均更好。

预制拼装铁路重力式桥墩的抗震性能研究

为适应中国铁路建设向高烈度震区快速发展的需要,解决传统预制拼装桥墩墩柱及承台连接位置薄弱等问题,提出一种灌浆波纹管连接的模块化预制拼装桥墩体系,通过设置承台与墩身塑性区域共同浇筑及墩底局部无黏结段增强桥墩的抗震性能。制作1个局部无黏结整体现浇铁路重力式桥墩模型和1个局部无黏结预制拼装铁路重力式桥墩模型开展拟静力试验,并结合有限元分析,进行预制拼装铁路重力式桥墩抗震性能研究。结果表明:局部无黏结预制拼装桥墩整体连接性能稳定,可通过墩底塑性区域破坏与墩身及节段间的摇摆实现共同消能,其破坏模式表现为墩底塑性区域的弯曲破坏,未发生破坏位置转移现象;局部无黏结预制拼装桥墩等效塑性区域高度比整体现浇桥墩降低,抗侧向水平承载力与耗能能力提升显著,位移延性能力良好,可适应更大加载位移,最终累积耗能增长64.3%;结构接缝位置连接稳定可靠,同等加载位移下等效刚度基本一致,抗震性能得到明显提高;预制节段划分对预制拼装铁路重力式桥墩抗震性能的影响不大。

中空夹层钢管钢渣混凝土T形节点抗震性能研究

将钢渣混凝土灌入中空夹层钢管混凝土结构,充分利用钢渣混凝土的微膨胀性和中空夹层内外钢管对混凝土的约束作用,有效解决了钢渣混凝土工程应用中的安定性问题。以混凝土类型、空心率、支主管直径比和轴压比为参数变量,共进行了5个中空夹层钢管混凝土T形节点试件(1个普通混凝土试件、4个钢渣混凝土试件)拟静力试验研究。试验结果表明:与灌注普通混凝土相比,灌注钢渣混凝土对试件节点承载力影响不大,但位移延性和耗能能力明显增加,提高幅度分别达69.46%和48.20%;当空心率从0.3增大到0.5时,试件位移延性系数提高9.69%;当支主管直径比从0.40增大到0.68时,位移延性系数提高82.44%;当轴压比从0.1增大到0.2时,试件位移延性系数降低17.98%。建立有限元模型对试件的滞回性能进行了模拟,模拟结果与试验结果基本符合,验证了所建有限元模型的有效性。进而开展了节点承载力影响参数分析,得到最佳空心率为70%左右。钢渣在钢管混凝土结构中应用,可大幅提高其抗震性能。

钢管混凝土双块式轨枕无砟轨道结构疲劳性能试验研究

新型钢管混凝土(CFT)双块式轨枕克服了桁架钢筋双块式轨枕存在的生产制造复杂、存放易锈蚀、运营阶段易开裂等问题,可广泛应用于高速铁路和城市轨道交通无砟轨道结构。为检验CFT双块式轨枕无砟轨道结构的疲劳性能,采用11根预制CFT双块式轨枕现浇制作足尺无砟轨道结构节段模型,开展橡胶隔振垫式减振轨道和现浇整体式轨道节段的疲劳试验,揭示其疲劳损伤特性,分析典型疲劳加载循环次数后静载作用下轨道结构应变和变形分布及其演化规律。研究结果表明:1.5倍静轴重的疲劳荷载累计作用500万次后,减振节段及整浇节段CFT双块式轨枕无砟轨道结构混凝土均未出现肉眼可见的裂缝,轨枕与现浇道床整体工作性能良好,疲劳性能满足规范要求;停机开展静载试验过程中轨道结构各测点混凝土横向应变值随荷载增大而近似线性增大,最大拉压应变值均远小于混凝土的极限应变值,工作状态良好;轨道整浇节段道床板中处于整体受拉的状态,可见设置层间连接钢筋实现了道床与底座的共同工作;疲劳试验过程中轨道结构测点竖向位移值总体随着静载的增大而逐渐增大,位移量级较小,满足规范要求,减振轨道节段竖向位移值及其变化率大于整浇轨道节段。研究结果可供类似研究及钢管混凝土双块式轨枕无砟轨道结构工程应用参考。

采用大直径灌浆套筒连接的预制桥墩抗震性能研究

为探究墩台处采用大直径灌浆套筒连接的预制装配式桥墩抗震性能,进行拟静力试验及有限元分析。设计、制作2个采用大直径灌浆套筒(主筋直径40 mm)连接的预制装配式桥墩(预制桥墩)及1个现浇桥墩开展拟静力试验,对2类试件的试验现象、破坏形态、滞回曲线和承载能力进行对比分析,并采用有限元法对预制桥墩混凝土、套筒及连接钢筋的受力性能进行研究。试验结果表明:在水平循环荷载作用下,预制桥墩与现浇桥墩一致表现为弯剪破坏,但墩底区域破坏形式不同,现浇桥墩主要表现为柱脚混凝土大面积压碎,而预制桥墩的破坏现象更为严重,集中表现为套筒四周混凝土成块压碎剥落;相较于现浇桥墩,预制桥墩的承载能力平均值偏小5.2%,位移延性系数平均值偏小2.7%,预制桥墩力学性能与现浇桥墩相当。有限元分析结果表明:预制桥墩会在套筒顶部和桥墩底部出现2个塑性区,且预制桥墩中大直径灌浆套筒的受力状态以轴向受力为主,按照轴向受力进行套筒设计可满足其在桥墩结构中的受力要求;预制桥墩在墩底混凝土破坏后,其主筋和灌浆料仍保持可靠粘结,采用大直径灌浆套筒连接的预制桥墩抗震性能良好。

非对称集中荷载下无腹筋RC梁受剪性能试验研究

非对称集中荷载作用下钢筋混凝土无腹筋简支梁具有两个不同的剪跨比,而两剪跨段受剪承载力与剪力作用之间的相对大小存在不确定性.通过开展6根非对称和4根对称集中荷载作用下钢筋混凝土无腹筋简支梁受剪性能试验研究,获取了破坏形态、荷载-跨中位移曲线和纵向受拉钢筋应变,并分析了《混凝土结构设计规范》(GB 50010—2010)公式、修正压力场理论、基于截面应变分析的抗剪模型和Zsutty统计公式的适用性.结果表明,对于小剪跨比恒为1.0的无腹筋简支梁,大剪跨比为2.0~4.0的梁均在大剪跨段发生剪切破坏;当大剪跨比由3.0增大至3.5时,梁的极限承载力出现由大剪跨段控制转变为小剪跨段控制的现象《.混凝土结构设计规范》(GB50010—2010)预测非对称集中荷载作用下钢筋混凝土无腹筋简支梁发生剪切破坏的位置与试验结果相反,而Zsutty统计公式的预测效果最好.

钢支撑-钢筋混凝土掉层框架结构抗震性能试验研究

为改善坡地钢筋混凝土(RC)掉层框架结构抗侧刚度分布的不均匀性,设计了一栋在上接地层设置钢支撑的RC掉层框架结构,按1/4比例提取其顺坡向中榀框架下部5层子结构为试验对象,开展钢支撑-RC掉层框架拟静力试验,观测试件的破坏过程,并对比RC掉层框架试验所得试件的破坏形态,分析试件滞回性能、延性和刚度退化等抗震性能指标。结果表明:试件的最终破坏是以第4层柱底混凝土压溃,梁端混凝土剥落、底部钢筋断裂,顶层柱顶混凝土剥落为标志。与RC掉层框架试验结果相比,钢支撑-RC掉层框架试件上接地柱的破坏明显减轻,柱端破坏分布也更为均匀,避免了掉层框架结构“半层破坏模式”的出现,改善了结构的耗能和抗地震倒塌能力。但试件上接地层相邻上一层的变形和破坏程度较大,应对该楼层的柱端进行适当的抗震加强;设置钢支撑后,试件的滞回曲线较为饱满,并具有良好的延性(正、负向加载的位移延性系数分别可达5.13、5.69),正负向加载的刚度退化曲线也趋于对称。

PC钢棒-钢筋混合配筋混凝土柱抗震性能试验研究

为研究预应力混凝土用钢棒(steel bar for prestressed concrete, PC钢棒)-钢筋混合配筋混凝土柱的抗震性能,设计制作了5根相同尺寸、相同纵筋配筋率、不同PC钢棒替代率的PC钢棒-钢筋混合配筋混凝土柱试件,通过拟静力试验研究了PC钢棒替代率对试件抗震性能的影响规律。结果表明:随着PC钢棒替代率的提高,试件的裂缝分布高度降低,裂缝数量变少,滞回曲线的饱满程度逐渐降低,耗能能力降低,残余位移角减小,自复位能力增强;当PC钢棒的替代率不大于50%时,各试件的峰值荷载接近;当PC钢棒的替代率大于50%时,试件的峰值荷载随PC钢棒替代率的增大而提高;当加载位移角相同且不大于1.0%时,配置PC钢棒的混凝土柱的残余位移角较为接近,且明显小于未配置PC钢棒的钢筋混凝土柱的残余位移角;当加载位移角相同且大于1%时,柱的残余位移角随着PC钢棒替代率的增高而降低。

压弯剪扭复合作用下灌浆套筒装配式RC墩的抗震性能

随着城市交通的快速发展,对其建设要求越来越高,城市桥梁主要为匝道桥、斜交桥等非规则桥梁.为得到压弯剪扭等复合地震作用下装配式墩的损伤机理和滞回特性,进行了灌浆套筒连接(Grouting Sleeve,GS)、灌浆套筒和钢管混凝土剪力键组合连接(Grouting Sleeve and Steel-tube,GSS)装配式墩和钢筋混凝土现浇(Reinforced Concrete,RC)墩等三种桥墩在压弯剪扭复合作用下的拟静力试验.结合现有混凝土结构设计规范计算剪扭相关曲线,并与试验结果进行对比,分析装配式墩复合荷载作用下的剪扭承载能力.结果表明:GS构件与RC构件以压弯扭破坏为主,而插入钢管剪力键的GSS构件则发生塑性铰上移,呈现出剪扭破坏的特征.GS构件和RC构件具有较好的弯曲耗能能力,增加钢管剪力键的GSS构件则可以提升抗弯承载力.装配式墩接头导致其整体性较弱,GS构件和GSS构件抗扭承载力小于RC构件.各构件在复合荷载作用下的剪扭相关关系接近规范中的1/4圆理论曲线,研究结果可以为灌浆套筒连接装配式墩在压弯剪扭复合作用下的抗震性能分析提供参考.