Multivariate Statistical Process Monitoring and Control: Recent Developments and Applications to Chemical Industry

Multivariate statistical process monitoring and control (MSPM&C) methods for chemical process monitoring with statistical projection techniques such as principal component analysis (PCA) and partial least squares (PLS) are surveyed in this paper. The four-step procedure of performing MSPM&C for chemical process, modeling of processes, detecting abnormal events or faults, identifying the variable(s) responsible for the faults and diagnosing the source cause for the abnormal behavior, is analyzed. Several main research directions of MSPM&C reported in the literature are discussed, such as multi-way principal component analysis (MPCA) for batch process, statistical monitoring and control for nonlinear process, dynamic PCA and dynamic PLS, and on-line quality control by inferential models. Industrial applications of MSPM&C to several typical chemical processes, such as chemical reactor, distillation column, polymerization process, petroleum refinery units, are summarized. Finally, some concluding remarks and future considerations are made.

Integrated Statistical and Engineering Process Control Based on Smooth Transition Autoregressive Model

Traditional studies on integrated statistical process control and engineering process control (SPC-EPC) are based on linear autoregressive integrated moving average (ARIMA) time series models to describe the dynamic noise of the system.However,linear models sometimes are unable to model complex nonlinear autocorrelation.To solve this problem,this paper presents an integrated SPC-EPC method based on smooth transition autoregressive (STAR) time series model,and builds a minimum mean squared error (MMSE) controller as well as an integrated SPC-EPC control system.The performance of this method for checking the trend and sustained shift is analyzed.The simulation results indicate that this integrated SPC-EPC control method based on STAR model is effective in controlling complex nonlinear systems.

A novel Q-based online model updating strategy and its application in statistical process control for rubber mixing

To overcome the large time-delay in measuring the hardness of mixed rubber, rheological parameters were used to predict the hardness. A novel Q-based model updating strategy was proposed as a universal platform to track time-varying properties. Using a few selected support samples to update the model, the strategy could dramat- ically save the storage cost and overcome the adverse influence of low signal-to-noise ratio samples. Moreover, it could be applied to any statistical process monitoring system without drastic changes to them, which is practical for industrial practices. As examples, the Q-based strategy was integrated with three popular algorithms （partial least squares （PIE）, recursive PIE （RPLS）, and kernel PIE （KPIE）） to form novel regression ones, QPLS, QRPIE and QKPLS, respectively. The applications for predicting mixed rubber hardness on a large-scale tire plant in east China prove the theoretical considerations.

Study on Quality and Safety Trust Early Warning of Dairy Products Based on Statistical Process Control

In order to solve such problems as lack of dynamic evaluation system in evaluation of quality and safety trust of dairy products,and weak awareness of prevention,it is necessary to introduce the statistical process control into the quality and safety trust evaluation system of dairy products,and establish quality and safety trust early warning model for dairy products,so as to determine the control limit of control chart and carry out early warning according to eight criteria. According to the empirical results,the statistical process control is helpful for finding the hidden process risks and providing the necessary basis for enterprises taking positive measures to raise the confidence of consumers.

Application of Statistical Process Control for Setting Action Thresholds as Quality Assurance of Dose Verifications in External Beam Radiotherapy

Purpose: To test the concept of Statistical Process Control (SPC) as a Quality Assurance (QA) procedure for dose verifications in external beam radiation therapy in conventional and 3D Conformal Radiotherapy (3D-CRT) treatment of cervical cancer. Materials and Methods: A study of QA verification of target doses of 198 cervical cancer patients undergoing External Beam Radiotherapy (EBRT) treatments at two different cancer treatment centers in Kenya was conducted. The target doses were determined from measured entrance doses by the diode in vivo dosimetry. Process Behavior Charts (PBC) developed by SPC were applied for setting Action Thresholds (AT) on the target doses. The AT set was then proposed as QA limits for acceptance or rejection of verified target doses overtime of the EBRT process. Result and Discussion: Target doses for the 198 patients were calculated and SPC applied to test whether the action limits set by the Process Behavior Charts could be applied as QA for verified doses in EBRT. Results for the two sub-groups of n = 3 and n = 4 that were tested produced action thresholds which are within clinical dose specifications for both conventional AP/PA and 3D-CRT EBRT treatment techniques for cervical cancer. Conclusion: Action thresholds set by SPC were within the clinical dose specification of ±5% uncertainty for both conventional AP/PA and 3D-CRT EBRT treatment techniques for cervical cancer. So the concept of SPC could be applied in setting QA action limits for dose verifications in EBRT.

Assessing the Awareness and Usage of Quality Control Tools with Emphasis to Statistical Process Control (SPC) in Ethiopian Manufacturing Industries

Introduction: The present work was devoted to assess the awareness and usage of quality control tools with the emphasis on statistical process control in Ethiopian manufacturing industries. Semi structured questionnaire has been employed to executive and technical managers of manufacturing industries of various size and specialism across the country. Stratified random sample method by region was used to select sample industries for the study. The samples used for this study are industries mainly from Oromiya, Addis Ababa, Tigray, Amara, SNNP and Diredawa regions proportional to their size of the available industries. Methods: Exploratory method and descriptive statistics was used for data analysis. Available documents and reports related to quality control policy of the selected companies were investigated. Results and Discussions: The number of manufacturing industries involved in this study was 44. Of the sampled manufacturing industries about 60% are from Oromiya and Addis Ababa regions. It has been reported that 100% of the respondents said that the importance of quality control tools is very important to their organizations’ productivity and quality improvement (Figure 3). Quality control professionals were also asked the extent to which quality control system is working in their industry and majority of the respondents (45%) have indicated that quality control system is working to some extent in their respective industries (Figure 18). Conclusions and Recommendations: Most of the quality department of the industries did not fully recognize the importance of statistical process control as quality control tools. This is mainly due to lack of awareness and motivation of the top managements, shortage of man power in the area, and others together would make it difficult to apply quality control tools in their organization. In general, the industries in Ethiopia are deficient in vigor and found to be stagnant hence less exposed to a highly competitive market and don’t adopt the latest quality control techniques in order to gain knowledge about systems to improve quality and operational performance. We conclude that quality management system has to be established as an independent entity with a real power and hence the quality control department which is responsible for quality can make an irreversible decision with respect to quality of any given product. Moreover, the concerned bodies (government and ministry of industries) should give attention and work together with universities to ensure how these statistical process control techniques could be incorporated in a curriculum of the universities at higher levels in degree and masters programs. Furthermore, different trainings which could improve quality and efficiency of their respective management system should be given as short and long term to the employees including top and middle managers found in various industries relevant to their process.

Nonparametric Control Scheme for Monitoring Phase Ⅱ Nonlinear Profiles with Varied Argument Values

Profile monitoring is used to check the stability of the quality of a product over time when the product quality is best represented by a function at each time point.However,most previous monitoring approaches have not considered that the argument values may vary from profile to profile,which is common in practice.A novel nonparametric control scheme based on profile error is proposed for monitoring nonlinear profiles with varied argument values.The proposed scheme uses the metrics of profile error as the statistics to construct the control charts.More details about the design of this nonparametric scheme are also discussed.The monitoring performance of the combined control scheme is compared with that of alternative nonparametric methods via simulation.Simulation studies show that the combined scheme is effective in detecting parameter error and is sensitive to small shifts in the process.In addition,due to the properties of the charting statistics,the out-of-control signal can provide diagnostic information for the users.Finally,the implementation steps of the proposed monitoring scheme are given and applied for monitoring the blade manufacturing process.With the application in blade manufacturing of aircraft engines,the proposed nonparametric control scheme is effective,interpretable,and easy to apply.

Statistic PID Tracking Control for Non-Gaussian Stochastic Systems Based on T-S Fuzzy Model

A new robust proportional-integral-derivative （PID） tracking control framework is considered for stochastic systems with non-Gaussian variable based on B-spline neural network approximation and T-S fuzzy model identification. The tracked object is the statistical information of a given target probability density function （PDF）, rather than a deterministic signal. Following B-spline approximation to the integrated performance function, the concerned problem is transferred into the tracking of given weights. Different from the previous related works, the time delay T-S fuzzy models with the exogenous disturbances are applied to identify the nonlinear weighting dynamics. Meanwhile, the generalized PID controller structure and the improved convex linear matrix inequalities （LMI） algorithms are proposed to fulfil the tracking problem. Furthermore, in order to enhance the robust performance, the peak-to-peak measure index is applied to optimize the tracking performance. Simulations are given to demonstrate the efficiency of the proposed approach.

STATISTIC LINEARIZATION CONTROL FOR HYDRAULIC ACTIVE DAMPING SUSPENSION

A statistic linearization analysis method of bad nolinear hydraulic active damping suspension is provided.Also the optimum control strategy of semi active suspension and graded control strategy based on it are puted forward.Experimental researches are carried out on a 2 DOF(degree of freedom) hydraulic active damping suspension test system.The results showed that an excellent control effectiveness could be obtained by using statistic linearization optimum control which unfortunely requests continuously regulationg the damp in an accurate way and costs much in engeering application.On the contrary,the results also showed that graded control is more practicable which has a control effectiveness close to the optimum control and costs less.

Construction of Control Charts for Monitoring Various Parameters Related to the Management of the COVID-19 Pandemic

To monitor the quality characteristics of a process, appropriate graphical and statistical tools must be used. These tools are capable of showing the evolution over time of the behavior of the quality characteristics (measurable or countable) and detecting situations that seem to present certain anomalies. The control chart is one of these tools widely used in quality management. In the process of managing the COVID-19 pandemic, this tool will make it possible to know at all times whether the parameters monitored such as the positivity rate, the recovery rate, and the mortality rate, are under control and to act accordingly. Monitoring cure and mortality rates will also show us the effectiveness of the treatments used.

VPLS Based Quality and Cost Control for Tennessee Eastman Process

Product quality and operation cost control obtain increasing emphases in modern chemical system engineering. To improve the fault detection power of the partial least square (PLS) method for quality control, a new QRPV statistic is proposed in terms of the VP (variable importance in projection) indices of monitored process variables, which is significantly advanced over and different from the conventional Q statistic. QRPV is calculated only by the residuals of the remarkable process variables (RPVs). Therefore, it is the dominant relation between quality and RPV not all process variables (as in the case of the conventional PLS) that is monitored by this new VP-PLS (VPLS) method. The combination of QRPV and T2 statistics is applied to the quality and cost control of the Tennessee Eastman (TE) process, and weak faults can be detected as quickly as possible. Consequently, the product quality of TE process is guaranteed and operation costs are reduced.

Economic Design of & S Control Charts Based on Taguchi's Loss Function and Its Optimization

Much research effort has been devoted to economic design of X ＆ S control charts,however,there are some problems in usual methods.On the one hand,it is difficult to estimate the relationship between costs and other model parameters,so the economic design method is often not effective in producing charts that can quickly detect small shifts before substantial losses occur;on the other hand,in many cases,only one type of process shift or only one pair of process shifts are taken into consideration,which may not correctly reflect the actual process conditions.To improve the behavior of economic design of control chart,a cost ＆ loss model with Taguchi＇s loss function for the economic design of X ＆ S control charts is embellished,which is regarded as an optimization problem with multiple statistical constraints.The optimization design is also carried out based on a number of combinations of process shifts collected from the field operation of the conventional control charts,thus more hidden information about the shift combinations is mined and employed to the optimization design of control charts.At the same time,an improved particle swarm optimization（IPSO） is developed to solve such an optimization problem in design of X ＆ S control charts,IPSO is first tested for several benchmark problems from the literature and evaluated with standard performance metrics.Experimental results show that the proposed algorithm has significant advantages on obtaining the optimal design parameters of the charts.The proposed method can substantially reduce the total cost（or loss） of the control charts,and it will be a promising tool for economic design of control charts.

Memory-Type Control Charts Through the Lens of Cost Parameters

A memory-type control chart utilizes previous information for chart construction.An example of a memory-type chart is an exponentially-weighted moving average(EWMA)control chart.The EWMA control chart is well-known and widely employed by practitioners for monitoring small and moderate process mean shifts.Meanwhile,the EWMA median chart is robust against outliers.In light of this,the economic model of the EWMA and EWMA median control charts are commonly considered.This study aims to investigate the effect of cost parameters on the out-of-control average run lengthðARL_(1)Þin implementing EWMA and EWMA median control charts.The economic model was used to compute the ARL_(1) parameter.The 14 input parameters were identified and the analysis was carried out based on the one-parameter-at-a-time basis.When the input parameters change based on a predetermined percentage,the ARL_(1) is affected.According to the results of the EWMA chart,nine input parameters had an effect andfive input parameters had no effect on the ARL_(1) parameter.Further,only seven of the 14 input parameters had an effect on the ARL_(1) of the EWMA median chart.However,the effect of each input parameter on the ARL_(1) was different.Moreover,the ARL_(1) for the EWMA median chart was smaller than the EWMA chart.This analysis is crucial to observe and determine the input parameters that have a significant impact on the ARL_(1) of the EMWA and EWMA median control charts.Hence,practitioners can obtain an overview of the influence of the input parameters on the ARL_(1) when implementing the EWMA and EWMA median control charts.

Off-Line Quality Control in Bioproducts Processing: A Case Study in Greece

In the present article we study the production of grape molasses. Data drawn from a specified biolaboratory, are properly analyzed in order to detect factors that affect significantly the Brix value and the volatile acidity of the final product. The ground that is used for planting and a variety of grapes have been taken into account. Off-line statistical quality control techniques have been employed and the outcomes are displayed and discussed in detail.

Monitoring Saccharification Process in Brewery Industry Using Quality Control Charts

The aim of this study was to establish a control system for saccharification process using quality control charts. To achieve this goal, temperature, pH and brix were measured at 12 minutes intervals for 15 consecutive batches which took 2 hours each. The time variations for three process parameters were assessed to establish a good understanding of the saccharification process. The temperature varied between 58℃ and 62℃ while the pH decreased slowly due to oxidation, values of which varied between 5.7 and 5.0. Brix values increased linearly with time. The initial and final values of the three parameters varied from one batch to another. Of the three parameters, brix was not well represented on the quality control charts due to wide difference between initial and final values during saccharification. The final brix values varied between batches, from 10.6% to 11.6%. The control charts used in this study were X-bar and Range charts. The rules for interpreting control charts were implemented for both X-bar and R charts, results of which showed that the process was out of control, although some rules were not violated due to little number of batches studied. The values of for temperature and pH data (2.27℃ and 0.35, respectively) were lower compared to brix data (11.2%). The corresponding values of span between control limits, SPx and SPR for temperature and pH were also comparatively lower than those established from brix data. Due to larger values of for brix measurements, the corresponding control charts for brix were insensitive in identifying out-of-control points during saccharification process.

Everything You Wanted to Know but Could Never Find from the Cochran-Mantel-Haenszel Test

The Cochran-Mantel-Haenszel (CMH) test, developed in the 1950s, is a classic in health research, especially in epidemiology and other fields in which dichotomous and polytomous variables are frequent. This nonparametric test makes it possible to measure and check the effect of an antecedent variable X on a health outcome Y, statistically controlling the effect of a third variable Z that acts as a confounding variable in the relationship between X and Y. Both X and Y are measured on a dichotomous qualitative scale and Z on a polytomous-qualitative or ordinal scale. It is assumed that the effect of X on Y is homogeneous between the k strata of Z, which is usually tested by the Breslow-Day test with the Tarone’s correction or the Woolf’s test. The main statistical programs have the CMH test together with a test to verify the assumption of a homogeneous effect across the strata, so that it is easy to apply. However, its fundamentals and details of calculations are a mystery to most researchers, and even difficult to find or understand. The aim of this article is to present these details in a clear and concise way, including the assumptions and alternatives to non-compliance. This technical knowledge is applied to a simulated realistic example of the area of epidemiology in health and, finally, an interpretive synthesis of the analyses is given. In addition, some suggestions for the test report are made.

Engineering Quality and Knowledge Systems： An Appraisal for Improving the Spinning Stage

The industrial organisations have a vested interest in quality and its practices in making a quantum leap, thereby requiring proper refocusing and rethinking. This is targeted seriously towards firms acquiring Knowledge Systems （KS） in order to nurture the employees＇ capabilities. Therefore, to enhance performances and their highly creative direction takes consideration of QE （quality engineering） and KS and disciplines complementary to each other. Additionally, the flow of operations and activities of the KS through the application of quality engineering （QE） principles is according to the view of Japanese engineer Taguchi. This aims to achieve good quality in the product design and processes, and also to anticipate problems that may occur before the shipping of the products. In this study, the use of quality control engineering and Taguchi＇s function methods in determining these properties and the loss caused by the company will be examined. However, the adopted approach of study scope to the society will aid KS. Also, efforts in this direction motivate the employment of a statistical method by Taguchi which relied on the principle of target-oriented quality, representing the value characterising the product quality.

Investigation of Dynamic Multivariate Chemical Process Monitoring

Chemical process variables are always driven by random noise and disturbances. The closed-loop con-trol yields process measurements that are auto and cross correlated. The influence of auto and cross correlations on statistical process control (SPC) is investigated in detail by Monte Carlo experiments. It is revealed that in the sense of average performance, the false alarms rates (FAR) of principal component analysis (PCA), dynamic PCA are not affected by the time-series structures of process variables. Nevertheless, non-independent identical distribution will cause the actual FAR to deviate from its theoretic value apparently and result in unexpected consecutive false alarms for normal operating process. Dynamic PCA and ARMA-PCA are demonstrated to be inefficient to remove the influences of auto and cross correlations. Subspace identification-based PCA (SI-PCA) is proposed to improve the monitoring of dynamic processes. Through state space modeling, SI-PCA can remove the auto and cross corre-lations efficiently and avoid consecutive false alarms. Synthetic Monte Carlo experiments and the application in Tennessee Eastman challenge process illustrate the advantages of the proposed approach.

A strategy for population pharmaceutical quality assessment based on quality by design

From a regulatory perspective,drug quality consistency evaluation must concern different processes used for the same drug.In this study,an assessment strategy based on quality by design(QbD)was developed for population pharmaceutical quality evaluation.A descriptive analysis method based on QbD concept was first established to characterize the process by critical evaluation attributes(CEAs).Then quantitative analysis method based on an improved statistical process control(SPC)method was established to investigate the process indicators(PIs)in the process population,such as mean distribution,batch-to-batch difference and abnormal quality probability.After that rules for risk assessment were established based on the SPC limitations and parameters.Both the SPC parameters of the CEAs and the risk of PIs were visualized according to the interaction test results to obtain a better understanding of the population pharmaceutical quality.Finally,an assessment strategy was built and applied to generic drug consistency assessment,process risk assessment and quality trend tracking.The strategy demonstrated in this study could help reveal quality consistency from the perspective of process control and process risk,and further show the recent development status of domestic pharmaceutical production processes.In addition,a process risk assessment and population quality trend tracking provide databased information for approval.Not only can this information serve as a further basis for decisionmaking by the regulatory authority regarding early warnings,but it can also reduce some avoidable adverse reactions.With continuous addition of data,dynamic population pharmaceutical quality is meaningful for emergencies and decision-making regarding drug regulation.

Research on fault detection method for heat pump air conditioning system under cold weather

Building energy consumption accounts for nearly 40% of global energy consumption, HVAC （Heating, Ventilating, and Air Conditioning） systems are the major building energy consumers, and as one type of HVAC systems, the heat pump air conditioning system, which is more energy-efficient compared to the traditional air conditioning system, is being more widely used to save energy. However, in northern China, extreme climatic conditions increase the cooling and heating load of the heat pump air conditioning system and accelerate the aging of the equipment, and the sensor may detect drifted parameters owing to climate change. This non-linear drifted parameter increases the false alarm rate of the fault detection and the need for unnecessary troubleshooting. In order to overcome the impact of the device aging and the drifted parameter, a Kalman filter and SPC （statistical process control） fault detection method are introduced in this paper. In this method, the model parameter and its standard variance can he estimated by Kalman filter based on the gray model and the real-time data of the air conditioning system. Further, by using SPC to construct the dynamic control limits, false alarm rate is reduced. And this paper mainly focuses on the cold machine failure in the component failure and its soft fault detection. This approach has been tested on a simulation model of the ＂Sino-German Energy Conservation Demonstration Center＂ building heat pump air-conditioning system in Shenyang, China, and the results show that the Kalman filter and SPC fault detection method is simple and highly efficient with a low false alarm rate, and it can deal with the difficulties caused by the extreme environment and the non-linear influence of the parameters, and what＇s more, it provides a good foundation for dynamic fault diagnosis and fault prediction analysis.