Phanerozoic Tectonic Evolution,Metallogenesis and Formation of Mineral Systems in China

The continental Asia is mainly composed of three major tectonic regimes,the Tethys,Paleo Asian Ocean,and West Pacific.It underwent multi-stage plate convergences,ocean-continent transformations,and subductions,collisions and/or collages,and post collisional(orogenic)extensions in Phanerozoic.Tectonic evolution of the Asia brings up a unique fault system and tectonic geomorphological features in the China's Mainland.Also,it provides a geodynamic background for the formation and evolution of metallogeneses and mineral systems,resulting in nonuniform distribution of tectono-metallogenic systems and metallogenic belts.The spatiotemporal distribution of mineral deposits in China and adjacent areas exhibits periodic variation under controlling of the full life Wilson cycle and tectonic evolution,forming the plate convergence-related mineral system in East Asia.Porphyry Cu deposits are mainly related to compressional systems in Paleozoic and early Mesozoic,and more closely related to post-collision extensional settings in late Mesozoic and Cenozoic.Orogenic Au deposits mainly formed in post-orogeny extensional setting.Alkaline rock related rare earth element deposits formed mainly at margins of the North China and Yangtze cratons.Granite-pegmatite Li and other rare metal deposits formed mainly in early Mesozoic,related to Indosinian post-orogeny extension.Tectono-metallogenic systems provide important basis for the prospecting of mineral resources.

Tectonic evolution and accumulation characteristics of Carboniferous shale gas in Yadu-Ziyun-Luodian aulacogen, Guizhou Province, South China

The Yadu-Ziyun-Luodian aulacogen(YZLA) developed into being NW-trending in the Late Paleozoic,and was considered as an important passive continental margin aulacogen in Guizhou Province, South China. This tectonic zone is considered a large intracontinental thrust-slip tectonic unit, which has undergone a long period of development. It was ultimately determined in the Yanshanian, where the typical Upper Paleozoic marine shales were deposited. In 2021, Well QSD-1 was deployed in the Liupanshui area at the northwest margin of the aulacogen, and obtained a daily shale gas flow of 11011 m3in the Carboniferous Dawuba Formation. It thus achieved a breakthrough in the invesgation of shale gas in the Lower Carboniferous in South China, revealing relatively good gas-bearing properties and broad exploration prospects of the aulacogen. Being different from the Lower Paleozoic strata in the Sichuan Basin and the Yichang area of the Middle Yangtze, the development of the Carboniferous Dawuba Formation in the aulacogen exhibits the following characteristics:(1) The Lower Carboniferous shale is thick and widely distributed, with interbedded shale and marlstone of virous thickness;(2) The total organic carbon(TOC) content of the shale in the Dawuba Formation ranges from 1% to 5%, with an average of 2%, and the thermal maturity of organic matter(Ro) varies from 1% to 4%, with an average of2.5%, indicating good hydrocarbon generation capacity;(3) The main shale in the aulacogen was formed during the fault subsidence stage from the Middle Devonian to the Early Permian. Although the strong compression and deformation during the late Indosinian-Himalayan played a certain role in destroying the formed shale gas reservoirs, comparative analysis suggests that the area covered by the current Triassic strata has a low degree of destruction. It therefore provides good conditions for shale gas preservation,which can be regarded as a favorable area for the next exploration.

Extensional structures of the Nan'an Basin in the rifting tip of the South China Sea: Implication for tectonic evolution of the southwestern continental margin

Nan'an Basin is a giant hydrocarbon basin,but its tectonic division scheme and associated fault systems has not been well understood.Based on newly acquired seismic data from the southwestern margin of the South China Sea,this study analyzed the structural units,tectonic feature and geodynamics of the sedimentary basin.The new data suggests that the Nan0 an Basin is a rift basin oriented in the NE-SW direction,rather than a pull-apart basin induced by strike-slip faults along the western margin.The basin is a continuation of the rifts in the southwest South China Sea since the late Cretaceous.It continued rifting until the middle Miocene,even though oceanic crust occurred in the Southwest Subbasin.However,it had no transfer surface at the end of spreading,where it was characterized by a late middle Miocene unconformity(reflector T3).The Nan'an Basin can be divided into eight structural units by a series of NE-striking faults.This study provides evidences to confirm the relative importance and interplay between regional strike-slips and orthogonal displacement during basin development and deformation.The NE-SW-striking dominant rift basin indicates that the geodynamic drivers of tectonic evolution in the western margin of the South China Sea did not have a large strike-slip mechanism.Therefore,we conclude that a large strike-slip fault system did not exist in the western margin of the South China Sea.

Petrologic perspectives on tectonic evolution of a nascent basin(Okinawa Trough) behind Ryukyu Arc: A review

Okinawa Trough is a back-arc, initial marginal sea basin, located behind the Ryukyu Arc-Trench System. The formation and evolution of the Okinawa Trough is intimately related to the subduction process of the Philippine Sea Plate beneath the Eurasian Plate since the late Miocene. The tectonic evolution of the trough is similar to other active back-arcs, such as the Mariana Trough and southern Lau Basin, all of which are experiencing the initial rifting and subsequent spreading process. This study reviews all petrologic and geochemical data of mafic volcanic lavas from the Okinawa Trough, Ryukyu Arc, and Philippine Sea Plate, combined with geophysical data to indicate the relationship between the subduction sources （input） and arc or back-arc magmas （output） in the Philippine Sea Plate-Ryukyu Arc-Okinawa Trough system （PROS）. The results obtained showed that several components were variably involved in the petrogenesis of the Oki-nawa Trough lavas：sub-continental lithospheric mantle underlying the Eurasian Plate, Indian mid-oceanic ridge basalt （MORB）-type mantle, and Pacific MORB-type mantle. The addition of shallow aqueous fluids and deep hydrous melts from subducted components with the characteristics of Indian MORB-type mantle into the mantle source of lavas variably modifies the primitive mantle wedge beneath the Ryukyu and sub-continental lithospheric mantle （SCLM） beneath the Okinawa Trough. In the northeastern end of the trough and arc, instead of Indian MORB-type mantle, Pacific MORB-type mantle dominates the magma source. Along the strike of the Ryukyu Arc and Okinawa Trough, the systematic variations in trace element ratios and isotopic compositions reflect the first-order effect of variable subduction input on the magma source. In general, petrologic data, combined with geophysical data, imply that the Okinawa Trough is experiencing the＂seafloor spreading＂process in the southwest segment,＂rift propagation＂process in the middle seg-ment, and＂crustal extension＂process in the northeast segment, and a nascent ocean basin occurs in the southwest segment.

Tectonic Evolution of the Palaeo——Tethys in Changning——Menglian Belt and Adjacent Regions,Western Yunnan

The Changning - Menglian belt , located between the Baoshan - Gengma massif and the Simao - Lincang massif in Western Yunnan , preserves the complete record of a suture zone and the most continuous record of deep water sedimentation , representing the main branch of the Palaeo - Tethys polyisland ocean in the Hercynian - Indo-sinian stage .This belt could be further subdivided into three tectono - lithofacies zones . In the east zone , terrigenous elastics , argillaceous ,marl-argillaceous and silicate sedi-ments lie on the metamorphosed Early Palaeozoic base ment in concealed unconformity , representing deep water sediments on a passive continental margin . The central zone , although the basement rocks are absent from outcropping here , includes a contemporary complex of various sedimentary types , among them one type is of deep ocean sediments represented by radiolarian bedded chert , appearing from at least early Early Devonian to the Middle Triassic . Another type includes pure carbonates of the Early Carboniferous to the Late Permian , a type of shallow water carbonate platform on seamount or oceanic plateau within an ocean basin . In the west zone , the Permo - Carboniferous terrigenous elastics , argillaceous and silicate sediments appear again -representing the passive continental slope sedimentation in the east of the Baoshan - Gengma massif .As the Permo-Carboniferous rock types,sedimentary environments and palaeontological characters of the east and west zones are quite similar , we hold that these two zones were originally formed all on the eastern continental slope of the Baoshan - Gengma massif , and were separated due to eastward thrust later in the Indosinian orogeny . Intense thrust compacting also resulted in tectonic melange in the central zone , which is displayed by shallow water carbonates overlapping on or embedded in deep water volcanics . In the Lancangjiang belt , the Permo - Carboniferous are very complicated in sedimentary types which include island arc volcanics , deep water turbidites, silicolites and shallow water carbonates , representing the active continental margin in the west of the Simao massif. Whether there existed by Early Permi an, a Lincang magma tic arc still awaits further evidence . From the Late Permian,both the Changning-Meng-lian belt and the Lancangjiang belt experienced important sedimentary and volanic events which took place contemporaneously or penecontemporaneously but with different characters . Evidence for the Lincang magmatic arc began to be apparent , and the turbidite deep water basin in the Lancangjiang belt closed . Nevertheless , the Palaeo - Tethys oceanic basin , represented by the Changning - Menglian suture zone , existed until the Mid-dle Triassic . In the Late Triassic . massifs of Baoshan -Gengma ,Simao - Lincang ,collided and aggregated ,resulting in the disappearance of the Palaeo - Tethys ocean .

Tectonic Evolution and Geological Characteristics of Hydrocarbon Reservoirs in Marine Mesozoic-Paleozoic Strata in the South Yellow Sea Basin

The South Yellow Sea Basin is the main body of the lower Yangtze area in which marine Mesozoic–Paleozoic strata are widely distributed.The latest geophysical data were used to overcome the limitation of previous poor-quality deep data.Meanwhile,the geological characteristics of hydrocarbon reservoirs in the marine Mesozoic–Paleozoic strata in the South Yellow Sea Basin were analyzed by comparing the source rocks and the reservoir and utilizing drilling and outcrop data.It is believed that the South Yellow Sea Basin roughly underwent six evolutionary stages:plate spreading,plate convergence,stable platform development,foreland basin development,faulted basin development,and depression basin development.The South Yellow Sea Basin has characteristics of a composite platform-fault depression geological structure,with a half-graben geological structure and with a ‘sandwich structure' in the vertical direction.Four sets of hydrocarbon source rocks developed – the upper Permian Longtan–Dalong formation,the lower Permian Qixia formation,the lower Silurian Gaojiabian formation,and the lower Cambrian Hetang formation/Mufushan formation,giving the South Yellow Sea Basin relatively good hydrocarbon potential.The carbonate is the main reservoir rock type in the South Yellow Sea area,and there are four carbonate reservoir types:porous dolomitic,reef-bank,weathered crust,and fractured.There are reservoir-forming horizons similar to the typical hydrocarbon reservoirs in the Yangtze land area developed in the South Yellow Sea,and there are three sets of complete source-reservoir-cap rock assemblages developed in the marine strata,with very good hydrocarbon potential.

Earthquake-related Tectonic Deformation of Soft-sediments and Its Constraints on Basin Tectonic Evolution

The authors introduced two kinds of newly found soft-sediment deformation-synsedimentary extension structure and syn-sedimentary compression structure, and discuss their origins and constraints on basin tectonic evolution. One representative of the syn-sedimentary extension structure is syn-sedimentary boudinage structure, while the typical example of the syn-sedimentary compression structure is compression sand pillows or compression wrinkles. The former shows NW-SE-trendlng contemporaneous extension events related to earthquakes in the rift basin near a famous Fe-Nb-REE deposit in northern China during the Early Paleozoic （or Mesoproterozoic as proposed by some researches）, while the latter indicates NE-SW-trending contemporaneous compression activities related to earthquakes in the Middle Triassic in the Nanpanjiang remnant basin covering south Guizhou, northwestern Guangxi and eastern Yunnan in southwestern China. The syn-sedimentary boudinage structure was found in an earthquake slump block in the lower part of the Early Paleozoic Sailinhudong Group, 20 km to the southeast of Bayan Obo, Inner Mongolia, north of China. The slump block is composed of two kinds of very thin layers-pale-gray micrite （microcrystalline limestone） of 1-2 cm thick interbedded with gray muddy micrite layers with the similar thickness. Almost every thin muddy micrite layer was cut into imbricate blocks or boudins by abundant tiny contemporaneous faults, while the interbedded micrite remain in continuity. Boudins form as a response to layer-parallel extension （and/or layer-perpendicular flattening） of stiff layers enveloped top and bottom by mechanically soft layers. In this case, the imbricate blocks cut by the tiny contemporaneous faults are the result of abrupt horizontal extension of the crust in the SE-NW direction accompanied with earthquakes. Thus, the rock block is, in fact, a kind of seismites. The syn-sedimentary boudins indicate that there was at least a strong earthquake belt on the southeast side of the basin during the early stage of the Sailinhudong Group. This may be a good constraint on the tectonic evolution of the Bayan Obo area during the Early Paleozoic time. The syn-sedimentary compression structure was found in the Middle Triassic flysch in the Nanpanjiang Basin. The typical structures are compression sand pillows and compression wrinkles. Both of them were found on the bottoms of sand units and the top surface of the underlying mud units. In other words, the structures were found only in the interfaces between the graded sand layer and the underlying mud layer of the flysch. A deformation experiment with dough was conducted, showing that the tectonic deformation must have been instantaneous one accompanied by earthquakes. The compression sand pillows or wrinkles showed uniform directions along the bottoms of the sand layer in the flysch, revealing contemporaneous horizontal compression during the time between deposition and diagenesis of the related beds. The Nanpanjiang Basin was affected, in general, with SSW-NNE compression during the Middle Triassic, according to the syn-sedimentary compression structure. The two kinds of syn-sedimentary tectonic deformation also indicate that the related basins belong to a rift basin and a remnant basin, respectively, in the model of Wilson Cycle.

Tectonic Evolution of the Tianhuan Depression and the Western Margin of the Late Triassic Ordos

The Ordos Basin is one of the most important oil and gas basins in China. Based on surface outcrop, key exploratory wells and seismic reflection data and by using the technology of ＂prototype basin recovery＂, seismic profile ＂layer flattening＂ and ＂restoration of balanced section＂, and other methods, the sedimentary boundary, structure and the evolution history of the Tianhuan depression on the western margin of the Ordos Basin are reestablished. The following results have been obtained. （1） The west boundary of the Late Triassic Ordos Basin was far beyond the scope of the current basin. The basin is connected with the Late Triassic Hexi Corridor Basin, and its western margin did not have tectonic characteristics of a foreland basin. （2） The Tianhuan depression was first formed in the Late Jurassic. At the late stage it was impacted by the late Yanshanian and Himalayan tectonic movement and the depression axis gradually moved eastwards to the present location with a cumulative migration distance of -30 km. （3） Eastward migration of the depression axis caused adjustment and even destruction of the originally formed oil and gas reservoirs, so that oil and gas remigrated and aggregated, resulting in secondary structural reservoirs formed at high positions on the western flank of the depression.

Sequence Thickness and its Response to Episodic Tectonic Evolution in Paleogene Qikou Sag, Bohaiwan Basin

The sequence stratigraphy framework of Paleogene of Qikou Sag has been built in this paper. The evolution law of episodic subsidence in Qikou Sag has been expounded, with the analysis of the characteristic of sequence thickness, as well as the study of consedimental tectonic activity, subsidence history, paleogeomorphology and the coupling relationship among them. The faults controlling action was the dominant mechanism during rifting stage I , as the depression was the dominant mechanism during rifting stage III, which embodies a process from intense disparity fault depression to integral subsidence. Meanwhile, under the control of regional faulting and later stage depression, subsidence rate centers and paleogeomorphic concave centers are always corresponding to the sequence thickness centers, and the changes of subsidence centers and paleogeomorphology concave centers are consistent with the migration of thickness centers, which presents the restriction, coupling and response among them and clarifies the law that tectonic activity controls the basin fill by means of controlling the subsidence rate and paleogeomorphology from contributing factor angle. On this basis, the dynamic evolution of the composite pattern of structure-subsidence-deposition in the fault controlling actic region during the three rifting stages and their petroleum geological significance has been discussed.

Basin assemblages and tectonic evolution in the Bohai Gulfand its neighbors

According to multi- disciplinary research advances in recent years, three blocks which named Jiaoliao - Bohai block, central North China block and Ordos block are divided. The differences of the tectonic association, types, styles and features in the space, and evolution from Archaean to Cenozoic in the time, between the former two blocks are discussed. Tectonic features and evolution in the four tectonic stages of Precambrian, Indo- China, Yanshanian and Cenozoic are emphasized especially here. All of them described above have inherit and neogenic property. The temporal-spatial change and interaction among basin assemblages in the above four stages are analyzed. Escape tectonic model is employed to interpret coeval compressive and extensional basins in the study area.

Triassic Collisional Structures and Post-CollisionalDeformation of Bixiling UHP Rock Stack: Insightsfor Tectonic Evolution of UHP MetamorphicBelt in Dabie Massif, Central China

Detailed three-dimensional structural studies indicate that the Bixiling area, Dabie massif, central China shows the deepest exposed levels of the orogenic wedge formed during the Triassic Yangtze -Sino-Korean continental collision. New 1 : 10 000 scale structural mapping, combined with detailed petrological analysis in this area, has enabled us to accurately distinguish structures related to the Triassic continental collision from those related to post-collisional deformation in the ultrahigh pressure (UHP) metamorphic unit. The collisional or compressional structures include the massive eclogite with a weak foliation, foliated eclogite or UHP ductile shear zones, as well as upper amphibolite facies shear zones, whereas the post-collisional deformation is characterized by a regionally, flat-lying foliation containing stretching lineations and common reclined folds. The former is present exclusively in the eclogite lenses and their margins, representing orogenic thickening or syn-collisional events, while the latter was best occurred on variable scales under amphibolite facies conditions, showing sub-vertical, extreme shortening and ductile thinning of the metamorphic rock stack. The eclogite facies tectonites that have a marked fabric discordance to the penetrative amphibolite facies extension flow fabric are common. It is emphasized that an extensional tectonic setting following the collision-orogenic thickening stage was, at least partly, responsible for exhumation of the UHP metamorphic rocks in the Dabie massif. A new tectonic evolution model is proposed for the UHP metamorphic belt on the scale of the Dabie massif. The Bixiling area thus provides a window, from which the dynamic processes concerning the formation and exhumation of the UHP rocks can be observed. Regional studies in the Dabie Mountains have confirmed this interpretation.

Geology Along the Line from Yecheng to Shiquanhe and Tectonic Evolution of the Region Involved

The geotraverse from Yecheng to Shiquanhe, on the western Qinghai-Tibet Plateau, totalling 1056 km in length, passes the western Kunlun Mountains and the eastern end of the Karakorum Mountains. The Chinese and French scientists made a joint investigation along the line from July to August, 1989. Based on the outcropped ophiolites, palaeontology, sedimentary facies, magmatism, tectonic deformation and metamorphism, the region involved may be divided from north to south into five terranes and four ophiolitic suture zones. The ages of these terranes have a tendency to become increasingly younger from north to south.

Tectonic Evolution and Key Geological Issues of the ProtoSouth China Sea

There are numerous controversies surrounding the tectonic properties and evolution of the Proto-South China Sea(PSCS).By combining data from previously published works with our geological and paleontological observations of the South China Sea(SCS),we propose that the PSCS should be analyzed within two separate contexts:its paleogeographic location and the history of its oceanic crust.With respect to its paleogeographic location,the tectonic properties of the PSCS vary widely from the Triassic to the mid-Late Cretaceous.In the Triassic,the Paleo-Tethys and the Paleo-Pacific Oceans were the major causes of tectonic changes in the SCS,while the PCSC may have been a remnant sea residing upon Tethys or Paleo-Pacific oceanic crust.In the Jurassic,the Meso-Tethys and the Paleo-Pacific oceans joined,creating a PSCS back-arc basin consisting of Meso-Tethys and/or Paleo-Pacific oceanic crust.From the Early Cretaceous to the midLate Cretaceous,the Paleo-Pacific Ocean was the main tectonic body affecting the SCS;the PSCS may have been a marginal sea or a back-arc basin with Paleo-Pacific oceanic crust.With respect to its oceanic crust,due to the subduction and retreat of the Paleo-Pacific plate in Southeast Asia at the end of the Late Cretaceous,the SCS probably produced new oceanic crust,which allowed the PSCS to formally emerge.At this time,the PSCS was most likely a combination of a new marginal sea and a remnant sea;its oceanic crust,which eventually subducted and became extinct,consisted of both new oceanic crust and remnant oceanic crust from the Paleo-Pacific Ocean.In the present day,the remnant PSCS oceanic crust is located in the southwestern Nansha Trough.

Paleozoic tectonic evolution of the eastern Central Asian Orogenic Belt in NE China

The eastern Central Asian Orogenic Belt(CAOB)in NE China is a key area for investigating continental growth.However,the complexity of its Paleozoic geological history has meant that the tectonic development of this belt is not fully understood.NE China is composed of the Erguna and Jiamusi blocks in the northern and eastern parts and the Xing’an and Songliao-Xilinhot accretionary terranes in the central and southern parts.The Erguna and Jiamusi blocks have Precambrian basements with Siberia and Gondwana affinities,respectively.In contrast,the Xing’an and Songliao-Xilinhot accretionary terranes were formed via subduction and collision processes.These blocks and terranes were separated by the Xinlin-Xiguitu,Heilongjiang,Nenjiang,and Solonker oceans from north to south,and these oceans closed during the Cambrian(ca.500 Ma),Late Silurian(ca.420 Ma),early Late Carboniferous(ca.320 Ma),and Late Permian to Middle Triassic(260-240 Ma),respectively,forming the Xinlin-Xiguitu,Mudanjiang-Yilan,Hegenshan-Heihe,Solonker-Linxi,and Changchun-Yanji suture zones.Two oceanic tectonic cycles took place in the eastern Paleo-Asian Ocean(PAO),namely,the Early Paleozoic cycle involving the Xinlin-Xiguitu and Heilongjiang oceans and the late Paleozoic cycle involving the Nenjiang-Solonker oceans.The Paleozoic tectonic pattern of the eastern CAOB generally shows structural features that trend east-west.The timing of accretion and collision events of the eastern CAOB during the Paleozoic youngs progressively from north to south.The branch ocean basins of the eastern PAO closed from west to east in a scissor-like manner.A bi-directional subduction regime dominated during the narrowing and closure process of the eastern PAO,which led to“soft collision”of tectonic units on each side,forming huge accretionary orogenic belts in central Asia.

Tectonic Evolution of the Wanan Basin,Southwestern South China Sea

Quantitative studies on the extension and subsidence of the Wanan Basin were carried out based on available seismic and borehole data together with regional geological data. Using balanced cross-section and backstripping techniques, we reconstructed the stratigraphic deposition and tectonic evolution histories of the basin. The basin formed from the Eocene and was generally in an extensional/transtensional state except for the Late Miocene local compressoin. The major basin extension ocurred in the Oligocene and Early Miocene （before -16.3 Ma） and thereafter uniform stretch in a smaller rate. The northern and middle basin extended intensely earlier during 38.6-23.3 Ma, while the southern basin was mainly stretched during 23.3-16.3 Ma. The basin formation and development are related to alternating sinistral to dextral strike-slip motions along the Wanan Fault Zone. The dominant dynamics may be caused by the seafloor spreading of the South China Sea and the its peripheral plate interaction. The basin tectonic evolution is divided into five phases： initial rifting, main rifting, rift-drift transition, structural inversion, and thermal subsidence.

New Zircon U-Pb Age of Granodiorite in Chifeng at the Northern Margin of North China Craton and Constraints on Plate Tectonic Evolution

Objective The North China Craton （NCC） is one of the oldest cratons in the world. The accretionary belt at its northern margin has been the focus of scholars both at home and abroad （Zhu Junbing and Ren Jishun, 2017）. In recent years, a series of Late Paleozoic-Mesozoic intrusions trending E-W have been discovered within the northern margin of the NCC, forming a magmatic belt. The study on the origin and tectonic setting of this magmatic belt not only has important significance for understanding the Late Paleozoic-Mesozoic tectonic evolution history of the northern margin of the NCC, but also can provide key constraints on the evolution of its surrounding Xing＇an- Mongolia orogenic belt and the Paleo-Asian Ocean. At present, no Devonian to early stage of Early Carboniferous intrusion has been reported within the northern margin of the NCC.

Mesozoic–Cenozoic Tectonic Evolution and Uplift in Pamir:Application of Fission Track Thermochronology

The Pamir Plateau can be divided into three secondary tectonic units from north to south:the North,the Middle and the South Pamir Blocks.The North Pamir Block belonged to the southern margin of Tarim-Karakum,thermochronological study of the Pamir structural intersection indicates that accretion of the Middle Pamir Block to the Eurasian Continental Margin and its subduction and collision with the North Pamir Block occurred in the Middle–Late Jurassic.Due to the Neo-Tethys closure in the Early Cretaceous,the South Pamir Block began to collide with the accretion(the Middle Pamir Block)of the Eurasian Continental Margin.Affected by the collision and continuous convergence between the Indian Plate and the Eurasian Plate since the Cenozoic,Pamir is in a multi-stage differential uplift process.During 56.1–48.5 Ma,North Pamir took the lead in uplifting,that is,the first rapid uplift in the Pamir region began there.The continuous compression and contraction of the Indian and Eurasian plates during 22.0–15.1 Ma forced the Pamir tectonic syntaxis to begin its overall uplift,i.e.Pamir began to enter the second rapid uplift stage in the Early Oligocene,which lasted until the Middle Miocene.During 14.6–8.5Ma,South Pamir was in a rapid uplift stage,while North Pamir was in a relatively stable state,showing asymmetry of tectonic deformation in the Pamir region in space.Since 6.5 Ma,Pamir began to rapidly uplift again.

Polyphase Deformation of the Weihai-Rongcheng UHP Unit Rocks,NE Sulu:Insights into the Tectonic Evolution of the Dabie-Sulu UHP and HP Belts,China

Different scales of structural data reveal a complex deformation history of ultrahigh- pressure （UHP） rocks exposed in the Weihai-Rongcbeng area, NE Sulu （northern Jiangsu-eastern Shandong）, eastern China. Excluding pre-UHP deformations, at least five major sequential deformational stages （D1-Ds） are recognized. The first deformation （DO produced a weak foliation and lineation in massive eclogites. The foliated eclogite with a dominant foliation containing a stretching and mineral lineation was developed during the I）2 deformation. Both the D1 and D2 deformations occurred under UHP metamorphic conditions, and are well preserved in the eclogite bodies. D3 structures which developed shortly after the formation of granulite/amphibolite facies symplectites are characterized by imbricated associations marked by a regional, steeply dipping foliation, compositional layering, eclogite boudinage, isoclinal folds and reverse ductile shear zones. The D3 deformation was accompanied by decompressional partial melting. A regional, gently dipping amphibolite facies foliation and stretching lineation, low-angle detachments, and dome- and arc-shaped structures formed during the D4 deformation stage dominate to some degree the map pattern of the Weihai-Rongcbeng UHP domain. The last stage of deformation （Ds） gave rise to the final exhumation of the UHP rocks. Ds is characterized by development of brittle-dominated high-angle faulting associated with emplacement of large volmnes of undeformed granite plutons and dykes dated at 134-100 Ma. The deformational and metamorphic sequence followed by the UHP rocks in the Weihai-Rongcheng area is similar to that studied in the entire Dabie-Sulu UHP and HP metamorphic belts from microscopic to mapping scale. Based on structural data, combined with available petrographic, metamorphic and geochronological data, a speculative tectonic evolutionary model for the Dabie-Sulu UHP and IIP belts is proposed, involving continental subduction/collision between the Sino-Korean and Yangtze cratons and subsequent polyphase exhumation histories of the UHP and IIP metamorphic rocks.

Zircon U–Pb Geochronology and Petrogenesis of Early–Midlle Permian Arc–Related Volcanic Rocks in Central Jilin: Implications for the Tectonic Evolution of the Eastern Segment of Central Asian Orogenic Belt

This paper presents age and geochemical data of a recently identified Late Paleozoic volcanic sequence in central Jilin Province, with aims to discuss the petrogenesis and to constrain the tectonic evolution of the Central Asian Orogenic Belt in this area. Firstly, the volcanic rocks have zircon U-Pb ages of 290–270 Ma. Secondly, they are characterized by(a) ranging in composition from the low-K tholeiite series to high-K calc-alkaline series;(b) enrichment in light rare earth elements and depletion of heavy rare earth elements, with negative Eu anomalies;and(c) negative Nb, Ta, and Ti anomalies. Finally, the volcanic rocks yield εHf(t) values of +7.1 to +17. These data suggest that the central Jilin volcanic rocks were possibly derived from predominant partial melting of a depleted lithospheric mantle that might have been modified by subducted slab–derived fluids. Combined with previous studies, the Late Paleozoic–Early Mesozoic magmatism in Central Jilin can be divided into two stages:(a) a volcanic arc stage(290–270 Ma) represented by low-K to high–K, tholeiite to calc–alkaline plutons and(b) a syn–collisional stage(260–240 Ma) represented by high-K calc–alkaline I-type granites. Furthermore, the timing and the tectonic setting of the above magmatic rocks show that the arc was probably produced by the northward subduction of the Paleo-Asian Ocean and that the final closure of the Paleo-Asian Ocean occurred prior to the Early Triassic.

Tectonic evolution and its control over deposition in fault basins: A case study of the Western Sag of the Cenozoic Liaohe Depression, eastern China

The main petroliferous basins in eastern China are Cenozoic fault basins, most of which have experienced two-stage tectonic evolution, i.e., rifting subsidence in the Paleogene and post-rifting thermal subsidence in the Neogene-Quaternary. The episodic tectonic evolution and syndepositional faulting had significant influence on the fault basins in terms of accommodation space, deposition rate, and depositional facies zones. In this study, the tectonic deformation characteristics and the tectonic-depositional evolution of the Western Sag of the Cenozoic Liaohe Depression were investigated by comprehensive analysis of the available geological and geophysical data using the modern theory of tectonic geology and the balanced section technique. The tectonic deformation of the Cenozoic fault basin was characterized by superimposed faults and depression. In addition, there existed relatively independent but still related extensional tectonic systems and strike-slip tectonic systems. The tectonic evolution of the fault basin involved five stages, i.e., initial rifting stage （E2s4）, intense faulting stage （E2s3）, fault-depression transition stage （E3sl2）, differential uplifting stage （E3d）, and depression stage （N-Q）. According to the characteristics of tectonic development and evolution of the Western Sag, the depositional evolution in the Cenozoic fault basin was divided into two stages, i.e., multi-episodic rifting filling in the Paleogene and post-rifting filling in the Neogene-Quaternary. The former rifting stage was further subdivided into four episodes with different characteristics of depositional development. The episodic faulting controlled the filling process and filling pattern of the Cenozoic Western Sag as well as the development and spatial distribution of associated depositional systems, whereas the syndepositional faults that developed in multiple stages in various tectonic positions controlled the development of depositional systems and sand bodies in the Western Sag. That is, the fault terraces on steep slopes controlled the development of sand bodies, the fault terraces on gentle slopes controlled the development of low-stand fan bodies, and the fault terraces or fault troughs in the central basin controlled the development of fluxoturbidite bodies.