HYSTERESIS OF PHASE TRANSFORMATION TEMPERATURE IN NiTi SHAPE MEMORY ALLOY

The relationship between structure and hysteresis of phase transformation temperature in NiTi shape memory alloy has been investigated by means of TEM observation,positron an- nihilation and electrical resistivity measurement.The sequence of hysteresis for the alloy aged under different regimes was found to be:plate martensite>R-phase>tie-like martensite. The reversible displaeement of phase boundaries of these transformations is blocked by the co- herent stress field around Ti_(11)Ni_(14)phase particles.A linear relationship between S paramet- er of positron annihilation and maximum values of temperature hysteresis showed that the mismatch dislocation and elastic stress field established by Ti_(11)Ni_(14)phase precipitation are the main factor to determine the temperature hysteresis of phase transformation in NiTi shape memory alloy.

Magnetization study of ITER-type internal-Sn Nb3Sn superconducting wire

Through magnetization measurement with a SQUID magnetometer the heat treatment optimization of an international thermonuclear experimental reactor （ITER）-type internal-Sn Nb3Sn superconducting wire has been investigated. The irreversibility temperature T^＊ （H）, which is mainly dependent on A15 phase composition, was obtained by a warming and cooling cycle at a fixed field. The hysteresis width △M（H） which reflects the flux pinning situation of the A15 phase is determined by the sweeping of magnetic field at a constant temperature. The results obtained from differently heat-treated samples show that the combination of T^＊ （H） with AM（H） measurement is very effective for optimizing the heat reaction process. The heat treatment condition of the ITER-type wire is optimized at 675℃/128 h, which results in a composition closer to stoichiometric Nb3Sn and a state with best flux pinning.

Diurnal dynamics of soil respiration and the influencing factors for three land-cover types in the hinterland of the Taklimakan Desert,China

Knowledge of soil respiration and the influencing factors in desert ecosystems is essential to understanding carbon dynamics and responses of biotic and abiotic processes in soils to climate change. In this study, soil respiration rate（R_s） for three land-cover types（shifting sandy land, sandy land with straw checkerboard barriers, and shelter forest land） in the hinterland of the Taklimakan Desert was measured in May 2015 using an automated soil CO_2 flux system. The effects of soil temperature（T_s） and soil water content（W_s） on R_s were also analyzed. The results showed that R_s values in shifting sandy land, sandy land with straw checkerboard barriers, and shelter forest land were all low and exhibited obvious diurnal fluctuations. The establishment of straw checkerboard barriers in sandy land had no significant effect on R_s, while the establishment of shelterbelts significantly increased R_s. Shifting sandy land and sandy land with straw checkerboard barriers were carbon sinks at night and early morning and were carbon sources in the daytime, while shelter forest land always acted as a carbon source during the whole day. The synergistic effect of T_s and W_s could better explain the diurnal dynamics in R_s than single factor. In shifting sandy land and sandy land with straw checkerboard barriers, W_s was identified as a limiting factor influencing the diurnal dynamics of R_s. Furthermore, a relatively strong hysteresis loop existed between R_s and T_s. In contrast, in shelter forest land, R_s was significantly influenced by T_s, and a relatively weaker hysteresis loop existed between R_s and W_s.

Atomic tracking of thermally-driven structural evolution in 2D crystals:Case of NbSe_(2)

Advanced atomic tracking techniques play a critical role in characterizing structural evolution,elucidating fundamental mechanisms of exotic phenomena and tailoring delicate properties.Thermally driven structural modulation in 2D crystals,such as the charge density wave(CDW),often leads to intriguing quantum properties,making them a valuable platform for exploring fundamental physics and potential device applications.However,despite their significance,experimental studies addressing atomic tracking of thermally-driven structural evolution in 2D crystals have been limited.Herein,we utilize high-accuracy variable-temperature atomic tracking measurements with scanning tunneling microscopy(STM)to directly observe a series of structural transitions in a model 2D crystal,namely NbSe_(2).With the atomic tracking technique,we confirm the existence of the universal thermally-driven CDW transition hysteresis between the heating and cooling cycles.This transition hysteresis,characterized by a constant temperature offset,represents a new phenomenon of structural evolution.Our findings provide a feasible method to track CDW transitions at the atomic scale in 2D crystals,significantly contributing to a better understanding and the potential modulation of these materials'functions in nanodevices.

Influence of partial substitution of cerium for lanthanum on magnetocaloric properties of La_(1–x)Ce_xFe_(11.44)Si_(1.56) and their hydrides

The structure and magnetocaloric properties of La1–xCexFe11.44Si1.56 and their hydrides La1–xCexFe11.44Si1.56Hy（x=0, 0.1, 0.2, 0.3, 0.4） were investigated.The samples crystallized mainly in the cubic Na Zn13-type structure with a small amount of α-Fe phase as impurity.The lattice constants and Curie temperature presented the same change tendency with increasing of Ce content.For the hydrides, the influence of Ce content on lattice constants was weakened and the values of H concentration y were approximate to be 1.56.The La1–xCexFe11.44Si1.56 compounds exhibited large values of isothermal entropy change –ΔSm around the Curie temperature TC under a low magnetic field change of 1.5 T.The value of –ΔSm increased and then decreased with increasing Ce content, reached the maximum, 26.07 J/kg·K for x=0.3.TC increased up to the vicinity of room temperature by hydrogen absorption for the Ce substituted compounds, but TC only slightly decreased with increasing Ce content.The first-order metamagnetic transition was still kept in the hydrides and the maximum values of –ΔSm were lower than those of the La1–xCexFe11.44Si1.56 compounds, but still remained large values, about 10.5 J/kg K under a magnetic field change of 1.5 T.The values of –ΔSm were nearly independent of the Ce content and did not increase with increasing x for the hydrides.The La1–xCexFe11.44Si1.56Hy（x=0–0.4） hydrides exhibited large magnetic entropy changes, small hysteresis loss and effective refrigerant capacity covered the room temperature range from 305 to 317 K.These hydrides are very useful for the magnetic refrigeration applications near room temperature under low magnetic field change.