Thermal performance of cast-in-place piles with artificial ground freezing in permafrost regions

During the construction of cast-in-place piles in warm permafrost,the heat carried by concrete and the cement hydration reaction can cause strong thermal disturbance to the surrounding permafrost.Since the bearing capacity of the pile is quite small before the full freeze-back,the quick refreezing of the native soils surrounding the cast-in-place pile has become the focus of the infrastructure construction in permafrost.To solve this problem,this paper innovatively puts forward the application of the artificial ground freezing(AGF)method at the end of the curing period of cast-in-place piles in permafrost.A field test on the AGF was conducted at the Beiluhe Observation and Research Station of Frozen Soil Engineering and Environment(34°51.2'N,92°56.4'E)in the Qinghai Tibet Plateau(QTP),and then a 3-D numerical model was established to investigate the thermal performance of piles using AGF under different engineering conditions.Additionally,the long-term thermal performance of piles after the completion of AGF under different conditions was estimated.Field experiment results demonstrate that AGF is an effective method to reduce the refreezing time of the soil surrounding the piles constructed in permafrost terrain,with the ability to reduce the pile-soil interface temperatures to below the natural ground temperature within 3 days.Numerical results further prove that AGF still has a good cooling effect even under unfavorable engineering conditions such as high pouring temperature,large pile diameter,and large pile length.Consequently,the application of this method is meaningful to save the subsequent latency time and solve the problem of thermal disturbance in pile construction in permafrost.The research results are highly relevant for the spread of AGF technology and the rapid building of pile foundations in permafrost.

Spray Effect on the Thermal Performances of a Dry Cooling Tower

Pre-cooling the inlet air of a dry cooling tower by means of a spray can improve the tower performance during periods of high temperature.To study the spray effect on the thermal performance of natural draft dry cooling towers(NDDCTs),in this study 3-D numerical simulations of such a process have been conducted using Fluent 16.2(a two-way coupled Eulerian-Lagrangian approach).The considered NDDCT is 120 m high and only half system is simulated due to its structural symmetry.Three different spray strategies have been investigated at a typical crosswind speed of 4 m/s,which is the most frequent wind speed.The results have shown that:(1)The three implemented spray strategies can improve the thermal performance of the studied NDDCT with a vary-ing degree of success.In one case,the heat rejection rate can be increased by 35.2%,and the tower outlet water temperature can be decreased by 2.1℃ when compared with the no spray case;(2)To improve the thermal per-formance of the NDDCT using a small amount of water,the design of the spray pre-cooling system must include more nozzles on the windward and fewer or even no nozzles on the leeward sides of the NDDCT.

Thermal performance analysis of advanced partial gasification combined cycle

This paper presents the thermodynamic performance analysis and comparison of four kinds of advanced pressurized fluidized bed combustion combined cycle (APFBC-CC) system schemes, two based on pressurized fluidized bed (PFB) combustion and the other two based on atmospheric circulating fluidized bed (CFB) combustion. The results show that the first scheme avoids high temperature gas filter, but has the lower cycle efficiency and syngas heating value. The second scheme can gain the highest cycle efficiency, however it is better to now lower the filter operating temperature. The third and fourth schemes, based on CFB, have lower efficiencies than the second one. But the fourth one, with preheating air/steam for gasification, can obtain the highest heating value of syngas and gain higher efficiency than the third one.

Improvement of thermal performance of envelopes for traditional wooden vernacular dwellings of Tujia Minority in Western Hunan,China

Thermal performance of envelopes and indoor thermal environment were technologically improved for traditional wooden vernacular dwellings of Tujia Minority in Western Hunan, China, on the premise of protecting their conventional styles. Thermal insulation boards and wooden boards were added to the interior side of external walls of vernacular dwellings to form two layers of air cavities, so as to gain excellent thermal performance. The indoor temperature of such dwellings after reconstruction was apparently improved compared with the data before reconstruction both in winter and summer, which verified the feasibility and the effectiveness of the reconstruction technologies proposed.

Effect of obstruction on thermal performance of solar water heaters

Solar water heaters(SWH) are widely used in urban areas because of their advantages in reducing energy consumption and mitigating greenhouse gas emissions. However, the performance of SWH subjected to obstructions is unclear yet. In this study, we present a numerical evaluation on thermal performance of fa?ade-installed SWH under three typical obstructed scenarios, based on various levels of sunshine duration. This study is carried out for four locations with various latitudes across China. Thermal performance is measured by solar fraction for annual and monthly evaluation. The results show that the obstruction can seriously degrade annual solar fraction of SWH, even in the 4-hour sunshine duration scenario, for all the studied locations. Interestingly, only lengthening sunshine duration in the standard day(e.g., from 2 h to 4 h) may not result in increasing annual solar fraction markedly. In terms of the monthly performance, solar fraction in January and December decreases significantly, while from May to August it just declines slightly, except for Guangzhou having a swift reduction. This study can provide insights into the behavior and promote the appropriate application of SWH in urban areas.

Thermal performance of tubular heat exchanger with multiple twisted-tape inserts

The paper presents an experimental investigation on enhanced heat transfer and pressure loss characteristics by using single, double, triple, and quadruple twisted-tape inserts in a round tube having a uniform heat-fluxed wall. The investigation has been conducted in the heat exchanger tube inserted with various twisted-tape numbers for co- and counter-twist arrangements for the turbulent air flow, Reynolds number （Re） from 5300 to 24000. The typical single twisted-tape inserts at two twist ratios, y/w = 4 and 5, are used as the base case, while the other multiple twisted-tape inserts are aty/w = 4 only. The experimental results of heat transfer and pressure drop in terms of Nusselt number （Nu） and friction factor 00, respectively, reveal that Nu increases with the increment of Re and of twisted-tape number. The values of Nu for the inserted tube are in a range of 1.15-2.12 times that for the plain tube while f is 1.9-4.1 times. The thermal enhancement factor of the inserted tube under similar pumping power is evaluated and found to be above unity except for the single and the double co-twisted tapes. The quadruple counter-twisted tape insert provides the maximum thermal performance.

THE INFLUENCE OF THERMAL PERFORMANCE OF TWT CATHODE-HEATER ASSEMBLY BY DIFFERENT CONTACT FORM BETWEEN INNER HEAT SHIELD AND SUPPORT CYLINDER

In this paper,the influence of thermal performance of cathode-heater assembly of Traveling Wave Tube(TWT),which has different contact form between inner heat shield and supporting cylinder,is analyzed using the simulation software ANSYS.With both thermal radiation and heat conduction are considered,the temperature and heat flux distribution of structures with different contact form are calculated,and also starting time which is needed before temperature come into steady status.The result of analysis suggests that changing the contact form between inner heat shield and support cylinder can influence the thermal performance of cathode-heater assembly and improve assembly's temperature distribution and promote heater's heating efficiency.The result of this paper provides theoretical guidance in the design of cathode-heater assembly.

Al_(2)O_(3) andγAl_(2)O_(3) Nanomaterials Based Nanofluid Models with Surface Diffusion:Applications for Thermal Performance in Multiple Engineering Systems and Industries

Thermal transport investigation in colloidal suspensions is taking a significant research direction.The applications of these fluids are found in various industries,engineering,aerodynamics,mechanical engineering and medical sciences etc.A huge amount of thermal transport is essential in the operation of various industrial production processes.It is a fact that conventional liquids have lower thermal transport characteristics as compared to colloidal suspensions.The colloidal suspensions have high thermal performance due to the thermophysical attributes of the nanoparticles and the host liquid.Therefore,researchers focused on the analysis of the heat transport in nanofluids under diverse circumstances.As such,the colloidal analysis of H_(2)O composed byγAl_(2)O_(3)and Al_(2)O_(3)is conducted over an elastic cylinder.The governing flow models ofγAl_(2)O_(3)/H_(2)O and Al_(2)O_(3)/H_(2)O is reduced in the dimensionless form by adopting the described similarity transforms.The colloidal models are handled by implementing the suitable numerical technique and provided the results for the velocity,temperature and local thermal performance rate against the multiple flow parameters.From the presented results,it is shown that the velocity of Al_(2)O_(3)–H_(2)O increases promptly against a high Reynolds number and it decreases for high-volume fraction.The significant contribution of the volumetric fraction is examined for thermal enhancement of nanofluids.The temperature of Al_(2)O_(3)–H_(2)O andγAl_(2)O_(3)–H_(2)O significantly increases against a higherϕ.Most importantly,the analysis shows thatγAl_(2)O_(3)–H_(2)O has a high local thermal performance rate compared to Al_(2)O_(3)–H_(2)O.Therefore,it is concluded thatγAl_(2)O_(3)–H_(2)O is a better heat transfer fluid and is suitable for industrial and technological uses.

Thermal performance assessment of self-rotating twisted tapes and Al_(2)O_(3) nanoparticle in a circular pipe

In view of the practical importance of the heat transfer devices in various thermal engineering fields including chemical and nuclear engineering,this study aims at developing an effective method of heat transfer enhancement by using selfrotating twisted tapes(SRTTs)and Al_(2)O_(3) nanoparticles.The effect of the selfrotating twisted tapes and Al2O3 nanoparticles on the thermal performance was comprehensively investigated in a circular pipe.The experimental results indicated the heat transfer rate was effectively improved by SRTTs in comparison of plain tube.In addition,the heat transfer multiplier with SRTTs decreased from 1.38 to 1.08 with the Reynolds number increasing from 19,322 to 64,407,while the friction factor multiplier decreased from 1.61 to 1.32.Besides,the results indicated that the employment of Al_(2)O_(3) nanoparticles and SRTTs demonstrated superior thermal performance to the single SRTTs.As Reynolds number increases from 19,322 to 64,407,the heat transfer multiplier decreased from 2.08 to 1.18 in the mass concentration of 3.0%and from 1.38 to 1.08 in mass concentration of 0.0%.Finally,the new heat transfer and friction factor correlations considering the combined effect of Al2O3 nanoparticle and SRTTs were developed within 10%deviation of experimental values.

Experimental Thermal Performance of Different Capillary Structures for Heat Pipes

The temperature control in electronic packaging is the key in numerous applications,to avoid overheating and hardware failure.Due to high capability of heat transfer,good temperature uniformity,and no power consumption,heat pipes can be widely used for heat dissipation of electronic components.This paper reports an experimental thermal analysis of different capillary structures for heat pipes.The wicks considered are metal screens,axial microgrooves,and sintered metal powder.The heat pipes are made of copper,a 200 mm length tube and a 9.45 mm external diameter.Working fluid used was distilled water.The devices are investigated in three positions:0,90,and 270°to the horizontal under powers of 5 up to 45 W.The results show that in horizontal(0°)and with the evaporator under the condenser(270°),the heat pipes showed similar results.Nevertheless,in the reverse condition(the position against the gravity with the evaporator above the condenser,90°),the heat pipe with sintered wick presented the best thermal performance,as it has the lowest thermal resistance and supported a higher power.Besides that,the sintered powder capillary structure demonstrates the most homogeneous thermal behavior for every position,making the most suitable for applications susceptible to diverse inclinations.

The Impacts of Building Regulations on the Thermal Performance and Energy Consumption of Residential Buildings in Riyadh City-Saudi Arabia

Riyadh city is the fastest growing city in Saudi Arabia. The rapid urban growth that happened recently in Riyadh was not based on the traditional urban planning principles, which have been established and applied for the city development process. The imported building regulations have created a new urban structures and street patterns. The contemporary urban form in Riyadh city is based mainly on traffic and economic consideration with the neglect of environmental dimensions. This research aims to examine the impacts of building regulations on the thermal performance of residential buildings in Riyadh city, with the ultimate goal of establishing planning guidelines that consider the environmental conditions of the city. The methodology adopted for achieving the aim of this study consists of two phases. First, the literature related to building regulations development in Riyadh, as of 2018, was reviewed. Second, buildings energy simulation was conducted to examine the thermal performance of the typical current status of residential building blocks in Riyadh city, and then several changes to building regulations were made to investigate their impacts on the thermal performance of buildings. The results showed that the impacts of Riyadh building regulations on the thermal performance of residential buildings differ across the evaluated cases. The ratio of building height to street width, urban block street orientation, and building orientation are the main factors affecting thermal performance of buildings within urban block. The study also concludes that adjusting the ratio of building height to the distance between buildings could have a significant impact in reducing cooling loads. This study will help policy makers, planners and designers to investigate the shortcoming in the current building regulations.

Experimental investigation of thermal performance characteristics of sintered copper wicked and grooved heat pipes:A comparative study

Heat pipes are most frequently used for thermal management solutions.Selection of right type of heat pipe for a specific scenario is utmost necessary for best outcomes.The purpose of this research is comparison of thermal performance characteristics of sintered copper wicked and grooved heat pipes,which are mostly used types of heat pipes.Distilled water filled heat pipes were tested through experimentation in gravity assisted position.Experimental outcomes have been compiled in terms of capillary pressure,operating temperature,thermal resistance and heat transfer coefficient.Capillary pressure is high in sintered heat pipes compared to grooved heat pipes irrespective of groove dimensions.Grooved heat pipes have lower operating temperature compared to sintered heat pipes at the same heat load.At 8 W,compared to sintered heat pipes,grooved heat pipes have 8.24% lower condenser surface temperature,4.41% lower evaporator surface temperature and 7.79% lower saturation temperature.Thermal resistance of sintered heat pipe is much lower than grooved heat pipe.The maximum relative difference of 63.8% was observed at 8 W.Heat transfer coefficient of sintered heat pipe was observed double compared to grooved heat pipe at 8 W heat load.Thermal resistance and hence heat transfer coefficient of sintered heat pipe change almost in a linear manner with respect to heat load but unexpectedly turning point is observed in thermal resistance and heat transfer coefficient of grooved heat pipe.Grooved heat pipes attain equilibrium much earlier compared to sintered ones.Varying heat loads from 4 to 20 W causes variation in equilibrium establishment time from 7 to 4 min for grooved and from 10 to 7 min for sintered heat pipes.

Novel Analytical Thermal Performance Rate Analysis in ZnO-SAE50 Nanolubricant: Nonlinear Mathematical Model

The investigation of local thermal transport rate in the nanolubricants is significant.These lubricants are broadly used in environmental pollution,mechanical engineering and in the paint industry due to high thermal performance rate.Therefore,thermal transport in ZnO-SAE50 nanolubricant under the impacts of heat generation/absorption is conducted.The colloidal suspension is flowing between parallel stretching disks in which the lower disk is positioned at z=0 and upper disk apart from distance d.The problem is transformed in dimensionless version via described similarity transforms.In the next stage,an analytical technique(VPM)is implemented for the solution purpose.The graphical results against multiple flow parameters were furnished over the region of interest and explained comprehensively.It is imperative to mention that the results are plotted for ZnO-SAE50 and conventional liquid as well.Further,rapid motion of the fluid is perceived against high Reynolds andγparameters.The wall shear stresses at the upper end rises for multiple Reynolds andγwhile;decrement is detected at the lower end.The significant contribution of an internal heat source is noted for thermal performance rate at the upper end.Foremost,the local heat transport rate declines at the lower disk.By altering Reynolds number,prompt heat transfer rate is gained at the upper disk and increasing behavior of the local heat transport rate is slow at the lower disk.From the study,it is concluded that the nanolubricants have high thermal characteristics.Therefore,such fluids are reliable to use in above stated areas.

Analysis of the Thermal Performance of External Insulation in Prefabricated Buildings Using Computational Fluid Dynamics

This paper investigates the thermal performance of prefabricated exterior walls using the Computational Fluid Dynamics method to reduce energy consumption.The thermal performance of the prefabricated exterior wall was numerically simulated using the software ANSYS Fluent.The composite wall containing the cavity is taken as the research object in this paper after analysis.The simulation suggests that when the cavity thickness is 20 mm and 30 mm,the heat transfer coefficient of the air-sandwich wall is 1.3 and 1.29,respectively.Therefore,the optimal width of the cavity is 20 mm,and the most suitable material is the aerated concrete block.In addition,a comparative analysis is conducted on the cavity temperature in the wall under different conditions.It is proven that an intelligent environment control system can significantly improve thermal efficiency and provide a solid theoretical basis for further research in the external insulation of prefabricated buildings.

Study on the Thermal Performances of a New Type of Fabricated Thermally Insulating Decorative Wall Material

This study proposes three possible keel-surface layer combinations to implement a new type of thermally insulating decorative wall system.A set of 8 samples has been studied.In particular,through theoretical calculations,simulations,and experimental verification,the influence of different types of connecting structures on the overall thermal performance of the wall system has been determined.It has been found that a proper combination of these elements can meet existing energy-saving standards and effectively reduce the energy loss caused by thermal bridges due to the installation of steel keels at the edges of integrated wall panels.

Comparative Thermal Performance in SiO_(2)–H_(2)O and (MoS_(2)–SiO_(2))–H_(2)O Over a Curved Stretching Semi-Infinite Region: A Numerical Investigation

The investigation of Thermal performance in nanofluids and hybrid nanofluids over a curved stretching infinite region strengthens its roots in engineering and industry.Therefore,the comparative thermal analysis in SiO_(2)–H_(2)O and(MoS_(2)–SiO_(2))–H_(2)O is conducted over curved stretching surface.The model is reduced in the dimensional version via similarity transformation and then treated numerically.The velocity and thermal behavior for both the fluids is decorated against the preeminent parameters.From the analysis,it is examined that the motion of under consideration fluids declines against Fr and
.The thermal performance enhances for higher volumetric fraction and
.Further,it is noticed that thermal performance prevailed in(MoS_(2)–SiO_(2))–H_(2)O throughout the analysis.Therefore,(MoS_(2)–SiO_(2))–H_(2)O is better for industrial and engineering uses where high heat transfer is required to accomplished different processes of production.

Energy Consumption, Thermal Performance and Thermal Comfort in Public School Buildings in Jordan

Good learning outputs in schools require an acceptable physical environment inside schools. Whatever the climatic context that surrounds any school buildings, energy flows of different types should be provided. Concerns may include thermal environment, luminous environment and acoustics environment. Types of energy used are an important variable that contributes to thermal comfort. Physical structure of the school building is another factor to be taken into consideration. This article established a relationship between thermal comfort inside schools and types of energy flows which have been consumed to maintain the level of comfort required, controlled by the building fabric and consequent economic factors that affect energy consumption of school buildings. Different approaches were applied in order to achieve the research objectives. Field surveys, field measurements and analyzing historical data were the most approaches followed to implement this study. The final outputs of this work have a national value nationwide： establishing a relationship among thermal comfort, energy flows and building fabric is of importance. Furthermore, it is of great importance to the decision maker for educational facilities. Research will also establish a wide platform based on scientific investigations for developing climate responsive school architecture in Jordan.

Energy Consumption and Thermal Performance in Different Residential Building Types in Hot-Summer and Cold-Winter Zone

In China, REC （residential energy consumption） is the second largest energy use category （10%） following the industry. To fulfill the Chinese government＇s commitment that Chinese CO2 emissions would peak in 2030, as a result, improving the energy efficiency and reducing the emissions from the building sector is significantly important. A survey, in the form of a questionnaire, of energy consumption and thermal situation in different residential building types （detached house, multi-story building, high-rise building）, was undertaken in three cities （Shanghai, Hangzhou, and Changzhou） in hot-summer and cold-winter regions, these three cities were selected to represent the most flourishing economic provinces. This region in China was selected for the evaluation of EETP （energy and thermal performance analysis）, because of its special weather conditions, huge energy consumption （as both heating in winter and cooling in summer are necessary）, and other regional characteristics. 183 households were sampled and experiments were separately done in typical examples of three different building types. Systematic evaluation on EETP for three different residential building types, were put forward to assess the energy efficiency and thermal performance of three different building types.

Numerical Study of the Thermal Performance of Three Roof Models in Hot and Dry Climates

The thermal performance of three roofing models: tile, corrugated and earth terrace is numerically analyzed. The mathematical equations which govern the three roofing models are established by the electrical method of analogies. These equations are discretized by an implicit finite difference method and solved by the Gauss-Seidel algorithm. We analyze the influences of geometric parameters (Xlo, Xlarg, α and Ep) on the evolution of the temperatures of the different environments of our three roof models. In particular, we have shown that the effectiveness of a roof in reducing the temperature inside a room is linked to its physical properties. The results obtained that for the same geometric parameters, the earth roof terrace and the earth tile roof compared to the corrugated metal roof improve thermal comfort by lowering the interior temperature of 5ºC and 4.6ºC.

A Study on Thermal Performance of Palladium as Material for Passive Heat Transfer Enhancement Devices in Thermal and Electronics Systems

In this work,the thermal behavior of fin made of palladium material under the influences of thermal radiation and internal heat generation is investigated.The thermal model for the extended surface made of palladium as the fin material is first developed and solved numerically using finite difference method.The influences of the thermal model parameters on the heat transfer behaviour of the extended surface are investigated.The results show that the rate of heat transfer through the fin and the thermal efficiency of the fin increase as the thermal conductivity of the fin material increases.This shows that fin is more efficient and effective for a larger value of thermal conductivity.However,the thermal conductivity of the fin with palladium material is low and constant at the value of approximately 75 W/mK in a wider temperature range of-100℃and 227℃.Also,it is shown that the thermal efficiencies of potential materials(except for stainless steel and brass)for fins decrease as the fin temperatures increase.This is because the thermal conductivities of most of the materials used for fins decreases as temperature increases.However,keeping other fin properties and the external conditions constant,the thermal efficiency of the palladium is constant as the temperature of the fin increases within the temperature range of-100℃and 227℃.And outside the given range of temperature,the thermal conductivity of the material increases which increases the efficiency of the fin.The study will assist in the selection of proper material for the fin and in the design of passive heat enhancement devices under different applications and conditions.