Effectiveness of inhibitors in increasing chloride threshold value for steel corrosion

This investigation was aimed at evaluating the effectiveness of corrosion inhibitors in increasing the chloride threshold value for steel corrosion. Three types of corrosion inhibitors, calcium nitrite （Ca（NO2）2）, zinc oxide （ZnO）, and N,N＇-dimethylaminoethanol （DMEA）, which respectively represented the anodic inhibitor, cathodic inhibitor, and mixed inhibitor, were chosen. The experiment was carried out in a saturated calcium hydroxide （Ca（OH）2） solution to simulate the electrolytic environment of concrete. The inhibitors were initially mixed at different levels, and then chloride ions were gradually added into the solution in several steps. The open-circuit potential （Ecorr） and corrosion current density （lcorr） determined by electrochemical impedance spectra （EIS） were used to identify the initiation of active corrosion, thereby determining the chloride threshold value. It was found that although all the inhibitors were effective in decreasing the corrosion rate of steel reinforcement, they had a marginal effect on increasing the chloride threshold value.

Predicting the Threshold Values based on Diffusion Model of Nitrite Ions in Reinforced Concrete

The prediction model for inhibition effect of reinforced concrete was presented based on the Magge＇s model when the concrete surface was brushed with nitrite solution. The influence of the amount of nitrite solution on inhibiting duration was also discussed through a simulation analysis when the amount of solution were 250 g/m^2, 500 g/m^2, 1000 g/m^2 and 1500 g/m^2, respectively. The experimental results confirm that nitrite ion can diffuse well in concrete to reach an effective mol ratio from the surface of the concrete to the surface of the reinforcement, and has an effective protection for the bars against corrosion. The higher the amount of solution, the better it will accelerate getting the threshold value of mol ratio on the surface of rebar, and retarding the time for loosing the effective threshold value of mol ratio. It helps to increase the tendency of inhibiting duration and prolong the life of reinforced concrete. The nitrite solution amount is used to predict the corrosion inhibiting duration of concrete that contains chloride salt.

THRESHOLD VALUE FOR DIAGNOSIS OF CHAOTIC NATURE OF THE DATA OBTAINED IN NONLINEAR DYNAMIC ANALYSIS

In this paper surrogate data method of phase-randomized is proposed to identify the random or chaotic nature of the data obtained in dynamic analysis: The calculating results validate the phase-randomized method to be useful as it can increase the extent of accuracy of the results. And the calculating results show that threshold values of the random timeseries and nonlinear chaotic timeseries have marked difference.

DWT-SVD Based Image Steganography Using Threshold Value Encryption Method

Digital image steganography technique based on hiding the secret data behind of cover image in such a way that it is not detected by the human visual system.This paper presents an image scrambling method that is very useful for grayscale secret images.In this method,the secret image decomposes in three parts based on the pixel’s threshold value.The division of the color image into three parts is very easy based on the color channel but in the grayscale image,it is difficult to implement.The proposed image scrambling method is implemented in image steganography using discrete wavelet transform(DWT),singular value decomposition(SVD),and sorting function.There is no visual difference between the stego image and the cover image.The extracted secret image is also similar to the original secret image.The proposed algorithm outcome is compared with the existed image steganography techniques.The comparative results show the strength of the proposed technique.

Measured Impedance and Threshold Value of Electrode Line Impedance Supervision Based Protection in HVDC Transmission System

At present,electrode line impedance supervision(ELIS)based protection is widely used to detect faults on grounding electrode lines,which are indispensable elements of high-voltage direct current(HVDC)systems.The existing theoretical analysis of measured impedance is based on lumped line model and the threshold value is generally set according to engineering experience,which have caused the dead zone problem and even accidents.Therefore,a study on measured impedance of ELIS-based protection and its threshold value selection method is carried out to solve this problem.In this study,the expressions of measured impedance under normal operation and fault conditions are deduced based on rigorous and accurate line model.Based on the expressions,the characteristics of the measured impedance are calculated and analyzed.With the characteristics of the measured impedance,the applicability of the protection with the traditional threshold value is further discussed and the distribution of the dead zone can be located.Then,the method to calculate the threshold value of ELIS-based protection is proposed.With a proper threshold value selected by the proposed method,the dead zone of ELIS-based protection is effectively eliminated,and the protection can identify all types of faults even with large transition resistances.Case studies on PSCAD/EMTDC have been conducted to verify the conclusion.

Natural history and cycle threshold values analysis of COVID-19 in Xiamen City,China

Objective:This study elaborated the natural history parameters of Delta variant,explored the differences in detection cycle thresholds(Ct)among cases.Methods:Natural history parameters were calculated based on the different onset time and exposure time of the cases.Intergenerational relationships between generations of cases were calculated.Differences in Ct values of cases by gender,age,and mode of detection were analyzed statistically to assess the detoxification capacity of cases.Results:The median incubation period was 4 days;the detection time for cases decreased from 25 to 7 h as the outbreak continued.The average generation time(GT),time interval between transmission generations(TG)and serial interval(SI)were 3.6±2.6 days,1.67±2.11 days and 1.7±3.0 days.Among the Ct values,we found little differences in testing across companies,but there were some differences in the gender of detected genes.The Ct values continuous to decreased with age,but increased when the age was greater than 60.Conclusion:This epidemic was started from aggregation of factories.It is more reasonable to use SI to calculate the effective reproduction number and the time-varying reproduction number.And the analysis of Ct values can improve the positive detection rate and improve prevention and control measures.

Optimized quantum singular value thresholding algorithm based on a hybrid quantum computer

Quantum singular value thresholding(QSVT) algorithm,as a core module of many mathematical models,seeks the singular values of a sparse and low rank matrix exceeding a threshold and their associated singular vectors.The existing all-qubit QSVT algorithm demands lots of ancillary qubits,remaining a huge challenge for realization on nearterm intermediate-scale quantum computers.In this paper,we propose a hybrid QSVT(HQSVT) algorithm utilizing both discrete variables(DVs) and continuous variables(CVs).In our algorithm,raw data vectors are encoded into a qubit system and the following data processing is fulfilled by hybrid quantum operations.Our algorithm requires O [log(MN)] qubits with0(1) qumodes and totally performs 0(1) operations,which significantly reduces the space and runtime consumption.

Novel Method to Determine the Image Segmentation Threshold during the Quantitative Test on Meso-structure of Geo-material

As a kind of special material in geotechnical engineering, the mudded weak interlayer plays a crucial part in slope stability. In this paper, we presented a method to determine the threshold value of section micrographs of the mudded weak interlayer in slope during its meso-structure qualification process. Some soil tests, scanning electron microscopy（SEM） and image segmentation technology were performed to fulfill our purpose. Specifically, the relation between 3 D-porosity and the threshold was obtained by least square fitting of the threshold-porosity curves and a simplified pore equivalent model. Using this relation and the 3 D-porosity determined by soil experiments, we can figure out the polynomial equation of the threshold value. The threshold values obtained by the other existing methods in literature were employed to validate our present results.

MICROFRACTOGRAPHY OF NEAR-THRESHOLD FATIGUE CRACK PROPAGATION IN DUAL-PHASE STEELS

SEM microfractography of near-threshold fatigue crack propagation were carried out in the dual-phase steels of 3 martensite morphologies and 6 volume fractions of martensite (V_m). All of them are featured by cyclic cleavage characteristics in near-threshold region,i.e.,main- ly controlled by mode Ⅱ stress.In the higher ΔK regions,the fracture surfaces are character- ized by mixed modes including cyclic cleavage facets,two types of secondary cracks and striations,etc..The roughness-induced crack closure of fracture surface is attributed primarily to extreme high fatigue crack growth threshold values.

Analysis of Network Traffic with Extreme Value Theory

It is very im portant to analyze network traffic in the network control and management. In thi s paper, extreme value theory is first introduced and a model with threshold met hods is proposed to analyze the characteristics of network traffic. In this mode l, only some traffic data that is greater than threshold value is considered. Th en the proposed model with the trace is simulated by using S Plus software. The modeling results show the network traffic model constructed from the extreme va lue theory fits well with that of empirical distribution. Finally, the extreme v alue model with the FARIMA(p,d,q) modeling is compared. The anal ytical results illustrate that extreme value theory has a good application foreg round in the statistic analysis of network traffic. In addition, since only some traffic data which is greater than the threshold is processed, the computation overhead is reduced greatly.

Application of Extreme Value Theory to Generation and Analysis of Pseudorandom Samples

The article deals with the methodology of pseudorandom data analysis. As a mathematical tool for carrying out the research the extreme value theory was used that creates one of the directions in mathematical statistics, and is related to investigating the extreme deviations from the median values in probability distributions. Also, the methods for estimating unknown parameters and algorithm of random-number generation are discussed. The models of treatment the extreme values are constructed which are based on machine generated sample and approach is proposed for their future application for constructing forecasting models.

The Vegetation Classification of the Return Farmland to Pasture or Forest Region in Shaanxi-Gansu-Ningxia Based on SPOT/VEGETATION Data

In order to assess the climatical and ecological effect which returned the farmland to pasture or forest, the vegetation and crop in Northwest China with suitable threshold value were classified in this experiment by using multi-temporal SPOT/VEGETATION dada and combing supervised classification with unsupervised classification. Compared with the data from Statistical Department and actual investigation, the precision of the classified result was above 85%.

Scales,methods and technical analysis of China's residential environment evaluation

To improve China＇s residential environment evaluation system and enhance its guiding role, current research results are analyzed and summarized from three aspects including research scales, evaluation methods and applied technology by means of comparison, induction and empirical application. The guiding role of the current macro-scale evaluation system of urban planning and construction is generally not obvious, whereas the guiding role of medium and micro-scale systems to the improvement of residential environments is improving. There are diversified methods for determining the threshold values and the weights of indices in China＇s evaluation system. For instance, the analytic hierarchy process（AHP） method is adopted to determine the weights of indices. The advantages and disadvantages of the method are analyzed on the basis of empirical calculation. In the course of comprehensive analyses, a nonlinear model can reflect interactions among indices more than a linear model; the evaluation model under the ARCGIS platform prevails since it combines space and attribute, and it has intuitive results. So far, the methodological system of China＇s residential environment evaluation has not been established; its subject coverage and research category should be expanded, and its guiding role should be enhanced.

A Kind of Fuzzy Causal Diagnosis Method

Aim To improve the causal diagnosis method presented by Bandekar and propose a new method of finding the root fault order according to the fault possibility by means of numerical calculation. Methods Based on the causal graph, by utilization of fuzzified threshold value and fuzzy discrimination matrix, a kind of fuzzy causal diagnosis method was given and the fault possibility of each elements in the root fault candidate set (RFCS) was obtained. Results and Conclusion The order of each element in the RFCS can be obtained by the fault possibility, which makes the location of fault much easier. The diagnosis speed of this method is quite high, and by means of the fuzzified threshold value and fuzzy discrimination matrix, the result is more robust to noises and bad parameter's choice.

GPR data noise attenuation on the curvelet transform

Signal extraction is critical in GRP data processing and noise attenuation. When the target depth is shallow, its refl ection echo signal will overlap with the background noise, affecting the detection of arrival time and localization of the target. Thus, we propose a noise attenuation method based on the curvelet transform. First, the original signal is transformed into the curvelet domain, and then the curvelet coefficients of the background noise are extracted according to the distribution features that differ from the effective signal. In the curvelet domain, the coarse-scale curvelet atom is isotropic. Hence, a two-dimensional directional filter is designed to estimate the high-energy background noise in the coarsescale domain, and then, attenuate the background noise and highlight the effective signal. In this process, we also use a subscale threshold value of the curvelet domain to fi lter out random noise. Finally, we compare the proposed method with the average elimination and 2D continuous wavelet transform methods. The results show that the proposed method not only removes the background noise but also eliminates the coherent interference and random noise. The numerical simulation and the real data application suggest and verify the feasibility and effectiveness of the proposed method.

Relative efficacy of heartwood extracts and proprietory wood preservatives as wood protectants

The relative potentials of either heartwood extracts (air dry extracts in 60 percent methanol) of very durable woods (Afzelia africana J.E. Smith; Erythrophleum suaveolens (Guill & Perr.) Brenam. Syn. E guinensis G.Don. or Milicia excelsa (Welw) C.C. Berg. Syn. Chlorophora excelsa (Welw) Benth.) or any of two proprietary wood preservatives (AWPA type 揅? Chromated Copper Arsenate (CCA) or 5 percent solution of AWPA Standard Designation P ??type 揅? Pentanchlorophenol (Penta) in light oil solvent) to suppress attack on pressure treated Antiaris toxicaria Lesch Sapwood by either any of three species of decaying fungi (Coridopsis Polyzona Klotzch; Lenzites trabea; or Trametes cingulata Fr.) under soil block exposure conditions were investigated and threshold values determined. Extract/preservative dosages were either 8.009; 24.778; 48.056; 96.111 or 144.167 kg穖-3 (0.5; 1.5; 3.0; 6.0 or 9.0 1b/ft3). Exposure was for either 14 or 28 weeks and in accordance with ASTM D1413 72 Provisions. Conclusions reached were that at threshold values the ability of either any of the heartwood extracts or proprietary wood preservatives to suppress attack under conditions in this study was significant at 0.01. Relative efficacy of those biocides was dependent on fungal species. Neither any of the heartwood extracts nor any of the proprietary wood preservatives (except in the case of Trametes cingulata attack on CCA treated wood at highest retention level) was able to confer 搗ery durable?rating on treated wood. Possible reasons for the reduced relative durability of extracts visa vis native heartwood were advanced. At the highest retention level (144.167 kg穖-3) there was no significant difference (at 0.05 level) between efficacy of each of the heartwood extracts and any of the proprietary wood preservatives (CCA or Penta).

Non-Structural Mitigation Programs For Sediment-Related Disasters after the Chichi Earthquake in Taiwan

Following the Chichi Earthquake （ML=7.3） in 1999, sediment-related disasters, such as landslides and debris flows, have become more frequent in Taiwan. Because engineering structures cannot be fully and rapidly emplaeed, the government has initiated non-structural hazard mitigation programs. Initially, community debris flow evacuation drills were promoted in 2000. Typhoon Toraji caused numerous debris flow events in July 2001, and some communities evacuated according to the drills, significantly reducing the numbers of possible casualties. Based on that result, the government expanded the program for evacuation drills. Secondly, the early warning system created after the Chichi Earthquake will prevent many potential future casualties. Rainfall threshold values for debris flow warnings in different areas are determined from information received from local weather stations and modified for local geomorphologic situations. Real- time information is gradually being integrated to create a debris flow disaster warning system, the goal of which is to provide warnings to zones in which debris flows are likely. The warning system was launched in 2005 and has two levels of alarms： yellow and red. The final, red alarm triggers enforced evacuation. Overall, the decrease in casualties from debris flows during the decade after the Chichi Earthquake is not the result of a decrease in number or severity of sediment related disasters, but is more directly related to the gradually improved early warning and evacuation system. However, the compound hazards resulting from Typhoon Morakotin 2009 remind us of the ongoing need for improving the existing mitigation system.

Fault Diagnosis for Manifold Absolute Pressure Sensor(MAP) of Diesel Engine Based on Elman Neural Network Observer

Intake system of diesel engine is a strong nonlinear system, and it is difficult to establish accurate model of intake system; and bias fault and precision degradation fault of MAP of diesel engine can＇t be diagnosed easily using model-based methods. Thus, a fault diagnosis method based on Elman neural network observer is proposed. By comparing simulation results of intake pressure based on BP network and Elman neural network, lower sampling error magnitude is gained using Elman neural network, and the error is less volatile. Forecast accuracy is between 0.015？0.017 5 and sample error is controlled within 0？0.07. Considering the output stability and complexity of solving comprehensively, Elman neural network with a single hidden layer and with 44 nodes is presented as intake system observer. By comparing the relations of confidence intervals of the residual value between the measured and predicted values, error variance and failures in various fault types. Then four typical MAP faults of diesel engine can be diagnosed： complete failure fault, bias fault, precision degradation fault and drift fault. The simulation results show： intake pressure is observable and selection of diagnostic strategy parameter reasonably can increase the accuracy of diagnosis;the proposed fault diagnosis method only depends on data and structural parameters of observer, not depends on the nonlinear model of air intake system. A fault diagnosis method is proposed not depending system model to observe intake pressure, and bias fault and precision degradation fault of MAP of diesel engine can be diagnosed based on residuals.

Analysis On an SEIRS Epidemic Model with Pulse Vaccination and Two Time Delays

In this paper, an SEIRS epidemic model with pulse vaccination and two time delays is proposed. By using stroboscopic map and comparison principle, the disease-free periodic solution(DFPS for short) is obtained and the global asymptotic stability of the DFPS is proved. The sufficient conditions for the permanence of the model are obtained. In addition, numerical simulations are done to confirm our theoretical results.

Simulation of the Surface Hydrology of Dalinghe Watershed Automatically Based on SRTM DEM

[Objective] The aim was to simulate the surface water flow of Dalinghe watershed based on SRTM DEM.[Method] By using ArcGIS ModelBuilder,and SRTM DEM data of Dalinghe watershed as input data,the model to simulate the water flow of Dalinghe watershed was set up.[Result] The model realized automatic division of Dalinghe watershed area and extraction of stream network.In the meantime,it also made the choice of threshold during filling DEM and extracting stream network much easier.The division of the Dalinghe watershed was precise and the extraction result of Dalinghe and its corresponding level Ⅰ tributary river was close to actual stream network.However,the extraction of the smaller stream was less accurate.[Conclusion] The study provided scientific reference for the simulation of surface water network in future.