Synthesis and Characterization of Gadolinium Doping M-type Hexagonal Barium Ferrite Ultrafine Powders

The hexagonal BaGd x Fe 12- x O 19 ( x =0.1～1.0) nano sized powders with M type structure were synthesized by the sol gel auto combustion high temperature synthesis method. The effects of pH of the solution, the molar ratio of nitrate/citric acid and the calcination temperature on the synthesis of the ferrites were investigated. The crystal structure, grain size, shape and magnetic properties were studied by means of XRD, TEM and vibrating sample magnetometer.The results show that under the conditions of pH 7.0 or so, mole ratio of citrate/nitrate (1～3) and calcination temperature of 850 ℃ for 1 h, M type BaGd x Fe 12- x O 19 ultrafine powders with a particle size of less than 100 nm can be obtained, and the coercive force reaches 430 kA·m -1 at x =1.0, which is far greater than that of barium ferrite (BaFe 12 O 19 ).

Growth performance,digestive enzyme activities and serum nonspecific immunity of the red tilapia(Oreochromis mossambicus×Oreochromis niloticus)feddiets supplemented with ultrafine powder of Enteromopha prolifera

The present study evaluated ef fects of ultrafine powder of the green macroalgae E nteromopha prolifera as dietary supplement on growth performance, digestive enzyme activities and serum nonspecific immune responses of the red tilapia(O reochromis mossambicus × Oreochromis niloticus). The red tilapia were fed five diets supplemented with different levels of E. prolifera ultrafine powder as well as a control diet containing no E. prolifera for seven weeks(Diets 0–6 contained 0(control), 10, 20, 30, 40 and 50 g/kg of E. prolifera ultrafine powder, respectively). The results showed that diets supplemented with E. prolifera ultrafine powder generally improved growth, immunity and digestive enzyme activities of the red tilapia. In particular, the fish fed the diet incorporated 50 g/kg (5%) E. prolifera ultrafine powder(Diet 5) achieved the highest percentage weight gain, specific growth rate and the condition factor(increased by 15.4%, 8.0% and 5.7%, respectively when compared to the control). Feeding the diet also led to significantly increases( P <0.05) in serum nonspecific immune responses, including total superoxide dismutase, acid phosphatase, alkaline phosphatase, lysozyme activities and serum total protein(increased by 19.4%, 48.1%, 29.5%, 30.3% and 8.7%, respectively) as well as digestive enzyme activities of erepsin, gastric amylase, gastric lipase, pepsin, intestinal amylase and gastric lipase(increased by 15.7%, 33.3%, 16.3%, 21.3%, 52.3% and 28.2%, respectively) than those of the control. Based on these results, it is recommended that the inclusion level of E. prolifera ultrafine powder in the diet of the red tilapia should be 50 g/kg(or 5%).

PREPARATION OF ULTRAFINE POWDER OF Fe AND ZrO_2 WITH METASTABLE PHASES BY HIGH POWER LASER BEAMS

The radiation of material surface by high intensity laser beams is used to produce the uhrafine powder of pure Fe and ZrO_2.The morphology,size and phases of the powder were examined by X-ray diffraetometer,scanning electron microscopy as well as transmission electron microscopy.In pure Fe a considerable quantity of γ-phase was found in the powder.In ZrO_2 powder,instead of stable phase,two metastable phases appeared.

Preparation and Characterization of Pb(Zr_(0.52)Ti_ (0.48))O_3 Ultrafine Powders by a Sol-gel Combined with Combustion Process

A simple and rapid process for synthesizing lead zirconate titanate,Pb（Zr0.52Ti0.48）O3（PZT）,ferroclectric powders was developed.This process,combining the sol-gel and combustion process.offers several advantages over conventional methods.including rapid solution synthesis,use of commercially available materials lower synthesis temperature and ease of obtaining ultrafine powders.The precursor solution for synthesizing powders was prepared from lead nitrate.zireonium nitrate.titanium oxynitrate,citric acid and deionized water.The precarsor was investigated by DSC-TG,and the PZT powders were investigated by powder-XRD,IR spectra and TEM.XRD analysis shous that the powders possess a single phase perovskite type structure,no pyrochlore phase exists.and TEM image shows that the grain size of the powders is about 40nm.

In_2O_3 Ultrafine Powder Synthesis by Sol0Gel Method

The precursor of ultrafine In 2O 3 powder was prepared by the hydrolysis, peptization and gelation of InCl 3·4H 2O used as raw material. After calcination, ultrafine In 2O 3 powder was obtained. The particles were characterized by the methods of thermo gravimetric and differential thermal analysis (TG DTA), X ray diffractometry (XRD) and transmission electron microscopy (TEM), respectively.

Surface Adsorption of Si_3N_4 Ultrafine Powder at Room Temperature

In this paper, Pyrolysis Gas Chromatography Mass Spectroscopy is adopted to measure heating release curve of Si 3N 4 ultrafine powder at different temperatures. The results demonstrate that Si 3N 4 mainly adsorbs O 2, N 2, CO 2, NH 3 and H 2O during the storage at room temperature, of which O 2 and N 2 are physisorped and H 2O chemisorped. Hydrolysis reaction is the reason for oxygen increasement and the different states of oxygen can be determined by improved heat extraction. The mechanisms of the reaction speed as well as the formation of different states of oxygen are also discussed.

Synthesis and characterization of Nd doped M-type hexagonal barium ferrite ultrafine powders

The hexagonal BaNd x Fe12?x O19(x=0.1?1.0) fine powders with M-type structure were synthesized by sol-gel auto-combustion high-temperature synthesis method. The structure of powders, gels’ combustion and magnetic properties of powders were respectively studied by means of X-ray diffractometer (XRD), differential thermal analysis-thermogravimetric analysis (DTA-TG) and vibrating sample magnetometer (VSM). The powders before and after combustion and calcination at 450–850 °C with different mole ratio of Nd to Ba (0.1–1.0) were compared in terms of XRD. In addition, the effects of different synthesis conditions on magnetic properties of powders were also discussed. The results show that at pH 7.0 or so, mole ratio of citrate to nitrate (1–3) and calcination temperature of 850 °C for 1 h, M-type BaNd x Fe12?x O19(x=0.1?1.0) fine powders can be obtained, and the coercive force reaches 436880 A·m?1 at x=1, which is far greater than that of barium permanent ferrite (BaFe12O19).

STUDY ON PREPARATION OF YBa_2Cu_3O_(7-x) ULTRAFINE POWDERS BY SOL-GEL PROCESS

The ultrafine powders of YBa2Cu3O7-x with the size of 100nm were synthesized by Sol-Gel process using cit-rate as complex and ammonium hydroxide to adjust pH of solu-tion. The process of Sol formation and Gel polymerization of YBa2Cu3O7-x in the Sol-Gel synthetic reaction has bee studied. The particle size ,pruity, sintering activity and superconducting properties of YBa2Cu3O7-x prepared by Sol-Gel method are better than by solid state reaction.

Effects of Qishen Ultrafine Powder on Immune Efficacy in Chickens

[Objective] This paper aimed to observe the effects of Qishen ultrafine powder on immune efficacy of infectious bursal disease vaccine in chickens. [ Method] 360 1-day-old chickens were randomly divided into six groups equally, and group I -V were vaccinated with IBD live virus vaccine on the 21 th and 35th day, respectively. From 14th to 21th day, group I - Ⅲ were added with 1%, 0.5% of Qishen ultrafine powder and 2% of Qishan powder in basel diet, respectively, group IV was given Yupingfeng oral liquid and group VI was as a control group without vaccination. Be- fore the expedment （14-day-old chickens as DO ） and 7 （ D7 ）, 14 （ D14 ）, 21 （ D21 ）, 28 （ D26 ）, 35 （ D36 ）, 42 （ D42 ） days after the experiment, the dynamic change of serum IBD specific antibody was determined, respectively. On D7, D21 and D36, the dynamic change of peripheral T lymphocyte proliferation and IL-2 in serum were determined, respectively. The weight change was also observed. [Results] Compared with the immune control group, the immune effects of IBD vaccine of each administration group were significantly improved, and there was no significant difference between each other. [ Condusion] Qishen ultrafine powder could increase immune function of chickens at lower dosage.

Preparation of ultrafine WC-Co powder via fluidized bed

In this study,the effects of reaction parameters on the deep-reduction and carbonization process of WO_(2)-Co to WC-Co were studied.The results indicate that the oxygen loss rate of WO_(2) is positively correlated with temperature and methane partial pressure.The partial pressure of methane has no significant effect on the formation rate of WC.The carbon content and particle size of the product increase with the increase of CH_(4) partial pressure.By synergistically regulating the reaction temperature to 950℃,the CH_(4) partial pressure to 1.25%,and the reaction time to 60 min,ultrafine WC-Co powder without h phase can be obtained.The particle size of the composite powder is 128 nm,with total carbon content of 6.16%,free carbon content of 0.4%,and residual oxygen content of 0.05%,respectively.The growth rate relationship of tungsten carbide is as follows:δ(t)=1.21×10^(-13)exp(-12809.72/T)√t.

Preparation of ultrafine Co_3O_4 powders by continuous and controllable combustion synthesis

The continuously dynamic-controlled combustion synthesis （CDCCS） was developed based on the continuous fluidization and combustion synthesis technologies. CoC2O4·2H2O powders were transformed to Co3O4 in a gas-solid fluid bed unit designed and build independently, where the reactant of CoC2O4·2H2O powders and the reactant of air were poured and introduced from the top and the bottom of the bed at a certain rates respectively. The reagents met in the bed and ignited at a given low temperature, resulting in formation of Co3O4. The results show a significant difference in combustion wave models. In the case of CDCCS, there was an immobile combustion wave, floating in the combustion zone located in the middle of the bed, instead of propagating of the combustion wave. The temperature of the combustion wave can be controlled by adjusting the flow rate of carrier gas. The resultant Co3O4 powders （diameter size ≤0.8 μm） have a narrow particle size distribution and spherical or quasi-spherical shape. This novel technique has many advantages, such as continuation, efficiency, energy conservation and environmental friendly and has been used in mass production.

Effect of anions on preparation of ultrafine α-Al_2O_3 powder

Ultrafine alumina power was obtained by calcining the precursor at 1 200 ℃ for 2 h, which was prepared by homogeneous precipitation method using aluminium salts and urea as raw materials. The effects of anions on the morphology, particle size, surface area and configuration of the precursors were studied. The results show that the reactions of urea with aluminium nitrate and aluminium chloride result in agglomerates gels with bad filtering performance, the morphology is fibrillar. Aluminium sulphate-urea reactions result in the direct formation of amorphous powders with good filtering performance, of which morphology are regular spherical particles with larger granularity and smaller surface area. The reaction of mutual compound of aluminium sulphate and aluminium nitrate with molar ratio of 40:60 with urea can produce precursor with good filtering performance, spherical morphology, and uniform granularity distribution in the particle size range of 2-3 μm.

Particle Sizes and Antibacterial Activity of Radix Astragalus and Radix Isatidis Ultrafine Powders

Using 9200 laser particle size analyzer and KYKY-2800 scanning electron microscope, particle sizes and cellular morphology of Radix Astragalus and Radix Isatidis ultrafine powders were observed. According to the results, the particle size of 89. 1 % of Radix Astragalus ultrafine powders ranged from 1.729 [xm to 44.938 ｜xm, Z ）50 =4.368 ｜xm; the particle size of 93.411% of Radix Isatidis ultrafine powders ranged from 1.510 [xm to 44.938 ｜xm, Z ）50 = 8 .7 2 6 [xm. Radix As-tragalus and Radix Isatidis ultrafine powders were pulverized completely without intact cellular morphology. The antibacterial activity of Radix Astragalus and Radix Isatidis ultrafine powders against chicken-derived E. coli （078） was investigated. The results indicated that Radix Astragalus and Radix Isatidis ultrafine powders exhibited higher antibacterial activity against chicken-derived E. coli （078 ） compared with the corresponding coarse powders. This study laid a solid foundation for the development and application of Chinese medicine ultrafine powder preparations.

Investigation of Fe-Ni-B and Fe-Cr-B Ultrafine Amorphous Alloy Powders Prepared by Chemical Reduction

Ultrafine amorphous alloy powders of spherical shape with diameters from 10 to 50nm for Fe-Ni-B and Fe-Cr-B were prepared by chemical reduction. The amorphous structure of two powders was identified by X-ray diffraction. The B concentrations for the two alloy systems did not change dramatically, as the preparation condition changed. An oxide film covered up the powders. The maximum magnetization decreased as increasing the content of Ni or Cr.

Computational fluid dynamics simulation and experimental analysis of ultrafine powder suspension

The suspension characteristics of ultrafine powder slurry in the stirred vessel were simulated by using computational fluid dynamics.The results show that the Rushton disk turbine impeller is more conducive to maintaining suspended homogeneity and circulation of slurry compared with the pitch blade turbine pumping up impeller and the pitch blade turbine pumping down impeller.And the increase in stirring speed enhances turbulent fluctuation and anisotropic velocity of the fluid at the cost of more power consumption,which improves dispersibility and suspensibility of the particles.Meanwhile,the change of impeller clearance has a weak influence on the flow pattern,and the impeller clearance of 0.32T(T is the diameter of the bottom of the reactor)can achieve better dispersivity and suspensibility of the particles with lower power consumption and larger axial velocity.The experiments of surface coating modification of ultrafine titanium dioxide(TiO2)were carried out under the same conditions for those of the simulation system.The surface film morphology and photocatalytic properties of the modified TiO2 were analyzed,and the obtained data are well consistent with the simulation results.

Emulsive properties of nanometer TiO_2 ultrafine powder in oil-water system

INVESTIGAORS recognized the role of finely divided insoluble solid particles in stabilizing oil-water emulsions in the 1920s. The work has been extensively done since the 1980s. Butthe studies only focused on particles with the parameter up to micrometer size rather than thoseof nanometer size. In this letter, emulsive properties, including the type, ability and mecha-

Preparation of Ultrafine SiO2 Powder from Rice Husk and Properties of Its Infrared Spectrum

This paper discussed impact of temperature on the size distribution in preparing ultrafine silica from rice husk.The samples prepared were analyzed with infrared spectrum,and the relation between the particle size and intensity of characteristic absorption peak of IR at center around 1 100 cm-1 was disscussed with the baseline method.Results show that when the temperature is 650 ℃ and roasting time is 11 h,at optimal reaction conditions,the size distribution of the ultrafine silica powder prepared is relatively concentrated,and the average particle size is 199.5 nm.Moreover,the characteristic absorption band of IR is broadening gradually along with particle size decreasing.

Adsorption Behavior of Methyl Orange onto Modified Ultrafine Coal Powder

The adsorption of methyl orange onto ultrafine coal powder （UCP） and modified ultrafine coal powder （MUCP） from aqueous solutions were studied, in which the influence of contact time, dosage, temperature, pH, and methyl orange concentration in the solution were investigated. The adsorption kinetics of methyl orange by UCP and MUCP can be described by the Lagergren first-order and pseudo second-order kinetic models, respectively. The adsorption isotherms of methyl orange onto MUCP at 303, 313 and 323 K follow the Freundlich and Langmuir isotherm equation. Values of △G^0 for methyl orange adsorption onto MUCP are -22.55, -23.10 and -23.79 kJ·mol^-1 at 303, 313, and 323 K, respectively. The values of △H^0 and △S^0 are -3.74 kJ· mol^-1 and 61.99 J·mol^-1, respectively. The adsorption process is spontaneous and exothermic.

Preparation of ultrafine silver powders with controllable size and morphology

The ultrafine silver powders were prepared by liquid reduction method using Arabic gum as dispersant.The effects of different dispersants,pH values,and temperature on the morphology and particle size of silver powders were investigated.It is found that Arabic gum can better adsorb on silver particles via chemical adsorption,and it shows the best dispersive effect among all the selected dispersants.The particle size of silver powders can be finely tuned from 0.34 to 4.09μm by adjusting pH values,while the morphology of silver powders can be tuned by changing the temperature.The silver powders with high tap density higher than 4.0 g/cm3 were successfully prepared in a wide temperature range of 21.8-70°C.Especially,the tap density is higher than 5.0 g/cm3 when the temperature is optimized to be 50°C.The facile process and high silver concentration of this method make it a promising way to prepare high quality silver powders for electronic paste.

Effect of jet milling on micro-strain behavior and rupture behavior of agglomerates of ultrafine WC powders

The Williamson-Hall and uniaxial compression methods were used to study the variations of the micro-strain and stress-strain relations in WC powders after jet milling and ball milling, respectively. The rupture behavior of agglomerates in WC powders was investigated. Meanwhile, the as-obtained WC powders treated by different milling methods were used to fabricate WC-10%Co cemented carbides, followed by the performance assessment of cemented carbides. The results show that the micro-strain of the jet-milled WC powders decreases significantly compared with that of the ball-milled WC powders, and that the cemented carbides prepared by jet-milled WC powders exhibit excellent properties with a transverse-rupture strength of 4260 MPa, due to the elimination of agglomerates and the reduction of lattice strain.