Devolatilization of high viscous fluids with high gravity technology

Volatile organic compounds(VOCs)are generally toxic and harmful substances that can cause health and environmental problems.The removal of VOCs from polymers has become a key problem.The effective devolatilization to remove VOCs from high viscous fluids such as polymer is necessary and is of great importance.In this study,the devolatilization effect of a rotating packed bed(RPB)was studied by using polydimethylsiloxane as the viscous fluid and acetone as the VOC.The devolatilization rate and liquid phase volume(KLa)have been evaluated.The results indicated that the optimum conditions were the high-gravity factor of 60,liquid flow rate of 10 L·h^(-1),and vacuum degree of 0.077 MPa.The dimensionless correlation of KLa was established,and the deviations between predicted and experimental values were less than±28%.The high-gravity technology will result in lower mass transfer resistance in the devolatilization process,enhance the mass transfer process of acetone,and improve the removal effect of acetone.This work provides a promising path for the removal of volatiles from polymers in combination with high-gravity technology.It can provide the basis for the application of RPB in viscous fluids.

Analysis of a Propeller Wake Flow Field Using Viscous Fluid Mechanics

The computational fluid dynamics （CFD） method is used to numerically simulate a propeller wake flow field in open water. A sub-domain hybrid mesh method was adopted in this paper. The computation domain was separated into two sub-domains, in which tetrahedral elements were used in the inner domain to match the complicated geometry of the propeller, while hexahedral elements were used in the outer domain. The mesh was locally refined on the propeller surface and near the wake flow field, and a size function was used to control the growth rate of the grid. Sections at different axial location were used to study the spatial evolution of the propeller wake in the region ranging from the disc to one propeller diameter （D） downstream. The numerical results show that the axial velocity fluctuates along the wake flow; radial velocity, which is closely related to vortices, attenuates strongly. The trailing vortices interact with the tip vortex at the blades＇ trailing edge and then separate. The strength of the vortex shrinks rapidly, and the radius decreases 20% at one diameter downstream.

Reflection and refraction of attenuated waves at boundary of elastic solid and porous solid saturated with two immiscible viscous fluids

The propagation of elastic waves is studied in a porous solid saturated with two immiscible viscous fluids. The propagation of three longitudinal waves is represented through three scalar potential functions. The lone transverse wave is presented by a vector potential function. The displacements of particles in different phases of the aggregate are defined in terms of these potential functions. It is shown that there exist three longitudinal waves and one transverse wave. The phenomena of reflection and refraction due to longitudinal and transverse waves at a plane interface between an elastic solid half-space and a porous solid half-space saturated with two immiscible viscous fluids are investigated. For the presence of viscosity in pore-fluids, the waves refracted to the porous medium attenuate in the direction normal to the interface. The ratios of the amplitudes of the reflected and refracted waves to that of the incident wave are calculated as a non- singular system of linear algebraic equations. These amplitude ratios are used to further calculate the shares of different scattered waves in the energy of the incident wave. The modulus of the amplitude and the energy ratios with the angle of incidence are computed for a particular numerical model. The conservation of the energy across the interface is verified. The effects of variations in non-wet saturation of pores and frequencies on the energy partition are depicted graphically and discussed,

On the pressure and stress singularities induced by steady flows of incompressible viscous fluids

Design for structural integrity requires an appreciation of where stress singularities can occur in structural configurations. While there is a rich literature devoted to the identification of such singular behavior in solid mechanics, to date there has been relatively little explicit identification of stress singularities caused by fluid flows. In this study, stress and pressure singularities induced by steady flows of viscous incompressible fluids are asymptotically identified. This is done by taking advantage of an earlier result that the Navier-Stokes equations are locally governed by Stokes flow in angular corners. Findings for power singularities are confirmed by developing and using an analogy with solid mechanics. This analogy also facilitates the identification of flow-induced log singularities. Both types of singularity are further confirmed for two global configurations by applying convergence-divergence checks to numerical results. Even though these flow-induced stress singularities are analogous to singularities in solid mechanics, they nonetheless render a number of structural configurations singular that were not previously appreciated as such from identifications within solid mechanics alone.

Performance of viscous fluid dampers coupling adjacent inelastic structures under near-fault earthquakes

The behavior of viscous fluid damper applied in coupling structures subjected to near-fault earthquake was studied.The structural nonlinearity was characterized by Bouc-Wen model and several near-fault ground motions were simulated by the combination of a recorded earthquake(background ground motion) with equivalent velocity pulses that possess near-fault features.Extensive parametric studies were carried out to find the appropriate damping coefficient.Performances of viscous fluid dampers were demonstrated by the relationship between the force and displacement,the maximal damper force and stroke.The control performances were demonstrated in terms of the response reductions of adjacent structures.The results show that the dynamic responses of adjacent structures are mitigated greatly.Proper damping coefficients of connecting fluid dampers have a small difference,while adjacent structures under different near-fault ground motions with the same peak acceleration.The maximum force of damper is about 0.8 MN,and the maximum damper stroke is about ±550 mm.Satisfied viscous fluid dampers can be produced according to the current manufacturing skills.

Acoustic radiation force on a rigid cylinder between two impedance boundaries in a viscous fluid

Acoustofluidic technology combines acoustic and microfluidic technologies to realize particle manipulation in microchannels driven by acoustic waves,and the acoustic radiation force(ARF)with boundaries is important for particle manipulation in an acoustofluidic device.In the work reported here,the ARF on a free cylinder immersed in a viscous fluid with an incident plane wave between two impedance boundaries is derived analytically and calculated numerically.The influence of multiple scattering between the particle and the impedance boundaries is described by means of image theory,the finite-series method,and the translational addition theorem,and multiple scattering is included partly in image theory.The ARF on a free rigid cylinder in a viscous fluid is analyzed by numerical calculation,with consideration given to the effects of the distances from cylinder edge to boundaries,fluid viscosity,cylinder size,and boundary reflectivity.The results show that the interaction between the two boundaries and the cylinder makes the ARF change more violently with different frequencies,while increasing the viscosity can reduce the amplitude of the ARF in boundary space.This study provides a theoretical basis for particle manipulation by the ARF in acoustofluidics.

On the pressure and stress singularities induced by steady flows of a pair of nonmiscible,incompressible,viscous fluids in contact with a wall

Design for structural integrity requires an appreciation of where stress singularities can occur in structural configurations. While there is a rich literature devoted to the identification of such singular behavior in solid mechanics, only of late has there been much in the way of corresponding identifications of flow-induced stress singularities in fluid mechanics. These recent asymptotic identifications are for a single incompressible viscous fluid： Here the asymptotic approach is extended to apply to a configuration entailing two such fluids, For this configuration, various specifications leading to power or log singularities are determined. These results demonstrate that flow-induced stress singularities can occur in a structural container at a location where no singularities are identified within solid mechanics alone.

Free Convection of a Viscous Electrically Conducting Fluid Past a Stretching Surface

Free convection of a viscous electrically conducting liquid past a vertical stretching surface is investigated in the presence of a transverse magnetic field.Natural convection is driven by both thermal and solutal buoyancy.The original partial differential equations governing the problem are turned into a set of ordinary differential equations through a similar variables transformation.This alternate set of equations is solved through a Differential Transform Method(DTM)and the Pade approximation.The response of the considered physical system to the non-dimensional parameters accounting for the relative importance of different effects is assessed considering different situations.

Application of computational fluid dynamics in design of viscous dampers-CFD modeling and full-scale dynamic testing

Computational fluid dynamics(CFD)provides a powerful tool for investigating complicated fluid flows.This paper aims to study the applicability of CFD in the preliminary design of linear and nonlinear fluid viscous dampers.Two fluid viscous dampers were designed based on CFD models.The first device was a linear viscous damper with straight orifices.The second was a nonlinear viscous damper containing a one-way pressure-responsive valve inside its orifices.Both dampers were detailed based on CFD simulations,and their internal fluid flows were investigated.Full-scale specimens of both dampers were manufactured and tested under dynamic loads.According to the tests results,both dampers demonstrate stable cyclic behaviors,and as expected,the nonlinear damper generally tends to dissipate more energy compared to its linear counterpart.Good compatibility was achieved between the experimentally measured damper force-velocity curves and those estimated from CFD analyses.Using a thermography camera,a rise in temperature of the dampers was measured during the tests.It was found that output force of the manufactured devices was virtually independent of temperature even during long duration loadings.Accordingly,temperature dependence can be ignored in CFD models,because a reliable temperature compensator mechanism was used(or intended to be used)by the damper manufacturer.

VARIATIONAL PRINCIPLES AND GENERALIZED VARIATIONAL PRINCIPLES IN HYDRODYNAMICS OF VISCOUS FLUIDS

In this paper, the variational principles of hydrodynamic problems for the incompressible and compressible viscous fluids are established. These principles are principles of maximum power losses. Their generalized variational principles are also discussed on the basis of Lagrangian multiplier methods.

FLOW OF A VISCOUS FLUID PAST A FLEXIBLE MEMBRANE

This paper treats the numerical calculation of a steady two-dimensional viscous flow past a flexible membrane. Both edges of the membrane are fixed in the flow and its chord is set normal to the flow. The numerical calculations of the Navier-Stokes equation based on a finite difference method and a relaxation method are carried out for several values of the membrane tension in cases when the Reynolds numbers are 5, 10 and 20. It is found that the membrane tension has a minimum value below which there is no steady shape of the membrane. Two different shapes of the membrane are possible at a given value of tension: the one is of small deformation, while the other a large deformation. There appear twin vortices in the concave region of the membrane shape if its deformation increases to a certain extent.

Nonlinear Dynamics in a Nonextensive Complex Plasma with Viscous Electron Fluids

Cylindrical and spherical dust-electron-acoustic （DEA） shock waves and double layers in an unmagnetized, col- lisionless, complex or dusty plasma system are carried out. The plasma system is assumed to be composed of inertial and viscous cold electron fluids, nonextensive distributed hot electrons, Maxwellian ions, and negatively charged stationary dust grains. The standard reductive perturbation technique is used to derive the nonlinear dynamical equations, that is, the nonplanar Burgers equation and the nonplanar further Burgers equation. They are also numerically analyzed to investigate the basic features of shock waves and double layers （DLs）. It is observed that the roles of the viscous cold electron fluids, nonextensivity of hot electrons, and other plasma parameters in this investigation have significantly modified the basic features （such as, polarity, amplitude and width） of the nonplanar DEA shock waves and DLs. It is also observed that the strength of the shock is maximal for the spherical geometry, intermediate for cylindrical geometry, while it is minimal for the planar geometry. The findings of our results obtained from this theoretical investigation may be useful in understanding the nonlinear phenomena associated with the nonplanar DEA waves in both space and laboratory plasmas.

Slip effects on streamline topologies and their bifurcations for peristaltic flows of a viscous fluid

We discuss the effects of the surface slip on streamline patterns and their bifurcations for the peristaltic transport of a Newtonian fluid. The flow is in a two-dimensional symmetric channel or an axisymmetric tube. An exact expression for the stream function is obtained in the wave frame under the assumptions of long wavelength and low Reynolds number for both cases. For the discussion of the particle path in the wave frame, a system of nonlinear autonomous differential equations is established and the methods of dynamical systems are used to discuss the local bifurcations and their topological changes. Moreover, all types of bifurcations and their topological changes are discussed graphically. Finally, the global bifurcation diagram is used to summarize the bifurcations.

Numerical Comparison for Focused Wave Propagation Between the Fully Nonlinear Potential Flow and the Viscous Fluid Flow Models

Numerical simulations on focused wave propagation are carried out by using three types of numerical models,including the linear potential flow,the nonlinear potential flow and the viscous fluid flow models.The wave-wave interaction of the focused wave group with different frequency bands and input wave amplitudes is examined,by which the influence of free surface nonlinearity and fluid viscosity on the related phenomenon of focused wave is investigated.The significant influence of free surface nonlinearity on the characteristics of focused wave can be observed,including the increased focused wave crest,delayed focused time and downstream shift of focused position with the increase of input amplitude.It can plot the evident difference between the results of the nonlinear potential flow and linear potential flow models.However,only a little discrepancy between the nonlinear potential flow and viscous fluid flow models can be observed,implying the insignificant effect of fluid viscosity on focused wave behavior.Therefore,the nonlinear potential flow model is recommended for simulating the non-breaking focused wave problem in this study.

WEAK SOLUTION TO THE INCOMPRESSIBLE VISCOUS FLUID AND A THERMOELASTIC PLATE INTERACTION PROBLEM IN 3D

In this paper we deal with a nonlinear interaction problem between an incompressible viscous fluid and a nonlinear thermoelastic plate.The nonlinearity in the plate equation corresponds to nonlinear elastic force in various physically relevant semilinear and quasilinear plate models.We prove the existence of a weak solution for this problem by constructing a hybrid approximation scheme that,via operator splitting,decouples the system into two sub-problems,one piece-wise stationary for the fluid and one time-continuous and in a finite basis for the structure.To prove the convergence of the approximate quasilinear elastic force,we develop a compensated compactness method that relies on the maximal monotonicity property of this nonlinear function.

PENALTY FINITE ELEMENT METHOD FOR NONLINEAR DYNAMIC RESPONSE OF VISCOUS FLUID-SATURATED BIPHASE POROUS MEDIA

The governing equations as well as boundary land initial conditions for nonlinear dynamic response problems of viscous fluid-saturated biphase porous medium model, based on mixture theory, are presented. With Galerkin weighted residual method the corresponding nonlinear dynamic penalty finite element equation, in which the dependencies of volume fraction and permeation coefficients an deformation are included, is obtained. The iteration solution method of the nonlinear system equation is also discussed. As a numerical example, the dynamic response of a porous medium column under impulsive loading action is analyzed with the developed finite element program. The numerical results demonstrate the efficiency and correctness of the method.

Fallopian tube assessment of the peristaltic-ciliary flow of a linearly viscous fluid in a finite narrow tube

The present theoretical assessment deals with the peristaltic-ciliary trans- port of a developing embryo within a fallopian tubal fluid in the human fallopian tube. A mathematical model of peristalsis-cilia induced flow of a linearly viscous fluid within a fallopian tubal fluid in a finite two-dimensional narrow tube is developed. The lubrica- tion approximation theory is used to solve the resulting partial differential equation. The expressions for axial and radial velocities, pressure gradient, stream function, volume flow rate, and time mean volume flow rate are derived. Numerical integration is performed for the appropriate residue time over the wavelength and the pressure difference over the wavelength. Moreover, the plots of axial velocity, the appropriate residue time over wavelength, the vector, the pressure difference over wavelength, and the streamlines are displayed and discussed for emerging parameters and constants. Salient features of the pumping characteristics and the trapping phenomenon are discussed in detail. Yhrther- more, a comparison between the peristaltic flow and the peristaltic-ciliary flow is made as the special case. Relevance of the current results to the transport of a developing embryo within a fallopian tubal fluid from ampulla to the intramural in the fallopian tube is also explored. It reveals the fact that cilia along with peristalsis helps to complete the required mitotic divisions while transporting the developing embryo within a fallopian tubal fluid in the human fallopian tube.

Elastodynamic analysis at an interface of viscous fluid/thermoelastic micropolar honeycomb medium due to inclined load

In this paper, the effect of angle inclination at the interface of a viscous fluid and thermoelastic micropolar honeycomb solid due to inclined load is investigated. The inclined load is assumed to be a linear combination of normal load and tangential load. Laplace transform with respect to time variable and Fourier transform with respect to space variable are applied to solve the problem. Expressions of stresses, temperature distribution, and pressures in the transformed domain are obtained by introducing potential functions. The numerical inversion technique is used to obtain the solution in the physical domain. The frequency domain expressions for steady state are also obtained with appropriate change of variables. Graphic representations due to the response of different sources and changes of angle inclination are shown. Some particular cases are also discussed.

MIXED COMPATIBLE ELEMENT AND MIXED HYBRID INCOMPATIBLE ELEMENT VARIATIONAL METHODS IN DYNAMICS OF VISCOUS BAROTROPIC FLUIDS

This paper presents and proves the mixed compatible finite element variationalprinciples in dynamics of viscous barotropic fluids. When the principles are proved, itis found that the compatibility conditions of stress can be naturally satisfied. The gene-rallzed variational principles with mixed hybrid incompatible finite elements are alsopresented and proved, and they can reduce the computation of incompatible elements indynamics of viscous barotropic flows.

Vibration of a Two-Layer“Metal+PZT”Plate Contacting with Viscous Fluid

The present work investigates the mechanically forced vibration of the hydro-elasto-piezoelectric system consisting of a two-layer plate“elastic+PZT”,a compressible viscous fluid,and a rigid wall.It is assumed that the PZT(piezoelectric)layer of the plate is in contact with the fluid and time-harmonic linear forces act on the free surface of the elastic-metallic layer.This study is valuable because it considers for the first time the mechanical vibration of the metal+piezoelectric bilayer plate in contact with a fluid.It is also the first time that the influence of the volumetric concentration of the constituents on the vibration of the hydro-elasto-piezoelectric system is studied.Another value of the present work is the use of the exact equations and relations of elasto-electrodynamics for elastic and piezoelectric materials to describe the motion of the plate layers within the framework of the piecewise homogeneous body model and the use of the linearized Navier-Stokes equations to describe the flow of the compressible viscous fluid.The plane-strain state in the plate and the plane flow in the fluid take place.For the solution of the corresponding boundary-value problem,the Fourier transform is used with respect to the spatial coordinate on the axis along the laying direction of the plate.The analytical expressions of the Fourier transform of all the sought values of each component of the system are determined.The origins of the searched values are determined numerically,after which numerical results on the stress on the fluid and plate interface planes are presented and discussed.These results are obtained for the case where PZT-2 is chosen as the piezoelectric material,steel and aluminum as the elastic metal materials,and Glycerin as the fluid.Analysis of these results allows conclusions to be drawn about the character of the problem parameters on the frequency response of the interfacial stress.In particular,it was found that after a certain value of the vibration frequency,the presence of the metal layer in the two-layer plate led to an increase in the absolute values of the above interfacial stress.