This study explores the application of single photon detection(SPD)technology in underwater wireless optical communication(UWOC)and analyzes the influence of different modulation modes and error correction coding type...This study explores the application of single photon detection(SPD)technology in underwater wireless optical communication(UWOC)and analyzes the influence of different modulation modes and error correction coding types on communication performance.The study investigates the impact of on-off keying(OOK)and 2-pulse-position modulation(2-PPM)on the bit error rate(BER)in single-channel intensity and polarization multiplexing.Furthermore,it compares the error correction performance of low-density parity check(LDPC)and Reed-Solomon(RS)codes across different error correction coding types.The effects of unscattered photon ratio and depolarization ratio on BER are also verified.Finally,a UWOC system based on SPD is constructed,achieving 14.58 Mbps with polarization OOK multiplexing modulation and 4.37 Mbps with polarization 2-PPM multiplexing modulation using LDPC code error correction.展开更多
This paper presents a wide-bandwidth back-illuminated modified uni-traveling-carrier photodiode(MUTC-PD)packaged with standard WR-5 rectangular waveguide for high-speed wireless communications.With optimized epitaxy s...This paper presents a wide-bandwidth back-illuminated modified uni-traveling-carrier photodiode(MUTC-PD)packaged with standard WR-5 rectangular waveguide for high-speed wireless communications.With optimized epitaxy structure and coplanar waveguide electrodes,the fabricated 4-μm-diameter PD exhibits ultra-flat frequency response and high saturation power.Integrated passive circuits including low-loss bias-tee and E-plane probe are designed to package the PD into a compact module with waveguide output.The packaged PD module has demonstrated a flat frequency response with fluctuations within±2.75 dB over a broadband of 140-220 GHz and a high saturated output power of-7.8 dBm(166μW)at 140 GHz.For wireless communication applications,the packaged PD is used to implement 1-m free space transmission at carrier frequencies of 150.5 and 210.5 GHz,with transmission rates of 75 and 90 Gbps,respectively.展开更多
The Chaotic Baseband Wireless Communication System(CBWCS)is expected to eliminate the Inter-Symbol Interference(ISI)caused by multipath propagation by using the optimal decoding threshold that is the sum of the ISI ca...The Chaotic Baseband Wireless Communication System(CBWCS)is expected to eliminate the Inter-Symbol Interference(ISI)caused by multipath propagation by using the optimal decoding threshold that is the sum of the ISI caused by past decoded bits and the ISI caused by future transmitting bits.However,the current technique is only capable of removing partial effects of the ISI,because only past decoded bits are available for the suboptimal decoding threshold calculation.The unavailability of the future information needed for the optimal decoding threshold is an obstacle to further improve the Bit Error Rate(BER)performance.In contrast to the previous method using Echo State Network(ESN)to predict one future bit,the proposed method in this paper predicts the optimal decoding threshold directly using ESN.The proposed ESN-based threshold prediction method simplifies the symbol decoding operation by avoiding the iterative prediction of the output waveform points using ESN and accumulated error caused by the iterative operation.With this approach,the calculation complexity is reduced compared to the previous ESN-based approach.The proposed method achieves better BER performance compared to the previous method.The reason for this superior result is twofold.First,the proposed ESN is capable of using more future symbols information conveyed by the ESN input to obtain more accurate threshold rather than the previous method in which only one future symbol was available.Second,the proposed method here does not need to estimate the channel information using Least Squared(LS)method,which avoids the extra error caused by inaccurate channel information estimation.Simulation results and experiment based on a wireless open-access research platform under a practical wireless channel show the effectiveness and superiority of the proposed method.展开更多
Traditional magnetically coupled resonant wireless power transfer technology uses fixed distances between coils for research,to prevent fluctuations in the receiving voltage,and lead to reduce transmission efficiency....Traditional magnetically coupled resonant wireless power transfer technology uses fixed distances between coils for research,to prevent fluctuations in the receiving voltage,and lead to reduce transmission efficiency.This paper proposes a closed-loop control wireless communication wireless power transfer system with a wearable four-coil structure to stabilize the receiving voltage fluctuation caused by changes in the displacement between the coils.Test results show that the system can provide stable receiving voltage,no matter how the distance between the transmitting coil and the receiving coil is changed.When the transmission distance is 20 mm,the power transfer efficiency of the system can reach 18.5%under the open-loop state,and the stimulus parameters such as the stimulation period and pulse width can be adjusted in real time through the personal computer terminal.展开更多
To reduce the network deployment cost and provide voice, message and low rate data services in remote pastoral areas of Tibet effectively, an integrated wireless communication system utilizing MANET(Mobile Ad hoc Netw...To reduce the network deployment cost and provide voice, message and low rate data services in remote pastoral areas of Tibet effectively, an integrated wireless communication system utilizing MANET(Mobile Ad hoc Network) is proposed. The sparse mobile devices, assisted with the solar-powered multi-functional standing stations mainly on networking maintenance and routing arrangement, self-organize into a MANET. The topology of the standing stations is designed for networking robust and to simplify the routing method and energy strategy. Then in the OMNe T++(Objective Modular Network Test bed in C++) simulation, the energy consumption is analysis while adjusting routing with the different energy status of the standing stations. The result shows that the standing stations should adjust routing as well as control the mobile devices' activity level according to the energy states of the standing stations and their adjacent mobile devices.展开更多
At 12.8 MHz center frequency,the advanced miniaturized polymer-based planar high quality factor(Q)passive elements embedded bandpassfilter works in the L-band.Because most of the demands operate inside the spectrum,the...At 12.8 MHz center frequency,the advanced miniaturized polymer-based planar high quality factor(Q)passive elements embedded bandpassfilter works in the L-band.Because most of the demands operate inside the spectrum,the wideband or high-speed operation necessary to enhance must be acquired in microwave frequency ranges.The channel has a quiet,high-performance micro-filter with wideband rejection.Capacitors and inductors are used in the high quality factor(Q)passive components,and related networks are incorporated in thefilter.Embedded layers are concatenated using Three-Dimensional Integrated Circuit(3D-IC)integration,parasitics are removed,and interconnection losses are negotiated using de-embedding methods.A wireless application-based Liquid Crystalline Polymer(LCP)viewpoint is employed as a substrate material in this work.The polymer processes,their properties,and the incorporated high-Q Band Pass Filter Framework.The suggestedfilter model is computed and manufactured utilizing the L-band frequency spectrum,decreasing total physical length by 31%while increasing bandwidth by 45%.展开更多
The Optical Wireless Communication(OWC)offers the high capacity of optical fiber communication with the flexibility of wireless communication.Since it works in the optical region of the ElectroMagnetic(EM)spectrum,it ...The Optical Wireless Communication(OWC)offers the high capacity of optical fiber communication with the flexibility of wireless communication.Since it works in the optical region of the ElectroMagnetic(EM)spectrum,it guarantees safety and security which are critical in radio and microwave frequency communication.The principal objective of this paper is to analyze the indoor OWC systems on these guaranteed features,and safety and security are jointly denoted by the term green.The high obstacle impermeability of optical signals and their directivity strengthen the security of indoor OWC data transmission.The confidentiality and authenticity of optical wireless data can also be preserved with the Quantum Key Distribution(QKD).This paper provides a technological overview and a review of literature about the OWC system that helps to identify the challenges in the path of a ubiquitous deployment of green wireless communication systems.Significant advancements in the sources and detectors are discussed together with the coding,modulation and multiplexing techniques for making highly robust OWC links.The ubiquitous deployment of green OWC necessitates the development of optical transmitters and receivers,performance enhancement techniques,incorporation of uplink and energy harvesting abilities,and safety and security enhancement techniques.Hence,a special emphasis is placed on these aspects and their challenges towards the green implementation.Furthermore,the paper explores some significant indoor applications based on the OWC that have great impacts on the Next Generation Networks(NGN)and the Internet of Things(IoT).展开更多
As the competition for marine resources is increasingly fierce,the security of underwater acoustic communication has attracted a great deal of attention.The information and location of the communicating platform can b...As the competition for marine resources is increasingly fierce,the security of underwater acoustic communication has attracted a great deal of attention.The information and location of the communicating platform can be leaked during the traditional underwater acoustic communication technology.According to the unique advantages of chaos communication,we put forward a novel communication scheme using complex parameter modulation and the complex Lorenz system.Firstly,we design a feedback controller and parameter update laws in a complex-variable form with rigorous mathematical proofs(while many previous references on the real-variable form were only special cases in which the imaginary part was zero),which can be realized in practical engineering;then we design a new communication scheme employing parameter modulation.The main parameter spaces of the complex Lorenz system are discussed,then they are adopted in our communication scheme.We also find that there exist parametric attractors in the complex Lorenz system.We make numerical simulations in two channels for digital signals and the simulations verify our conclusions.展开更多
The internet of the underground things(IoUT)is an emerging field that concerns connected underground sensing nodes and can find applications in various fields such as geotechnical engineering,precision agriculture,and...The internet of the underground things(IoUT)is an emerging field that concerns connected underground sensing nodes and can find applications in various fields such as geotechnical engineering,precision agriculture,and search and rescue operations.The complex underground environment and multiphase nature of the soil pose challenges to wireless underground communication.Most existing studies on wireless underground communication focus on the use of electromagnetic waves.However,as a highly lossy material for electromagnetic waves,soil can limit the range and reliability of data transmission.Inspired by subterranean animals that rely on vibrations or seismic waves for underground communication,the prototype system developed in this study is based on vibration.This system includes a bioinspired vibrating source,a micro-electromechanical system(MEMS)accelerometer,a microcontroller,and a set of algorithms for encoding and decoding information.Specifically,the mole ratsinspired source is small in size,low in cost,and energy-efficient.An on-off-keying decoding algorithm enhanced with an error-correction algorithm is found to be robust in transmitting textual and imaginary information.With the current design,a maximum transmission bit rate of 16e17 bits per second and a transmission distance of 80 cm can be achieved.The bit error ratio is as low as 0.1%,demonstrating the robustness of the algorithms.The performance of the developed system shows that seismic waves produced by vibration can be used as an information carrier and can potentially be implemented in the IoUT.展开更多
In this study,a real-time rotor temperature monitoring system for large turbogenerators using SmartMesh IP wireless network communication technology was designed and tested.The system is capable of providing comprehen...In this study,a real-time rotor temperature monitoring system for large turbogenerators using SmartMesh IP wireless network communication technology was designed and tested.The system is capable of providing comprehensive,accurate,continuous,and reliable real-time temperature monitoring for turbogenerators.Additionally,it has demonstrated satisfactory results in a real-time monitoring test of the rotor temperature of various famous large-scale turbogenerators and giant nuclear power half-speed turbogenerators designed and manufactured in China.The development and application of this wireless temperature measurement system would aid in improving the intelligent operation quality,safety,and stability of China’s large turbine generators and even the entire power system.展开更多
As we know, the future generation com-munication system is on the way to bedigitalized, integrated, broadband, intel-ligent, standardized and customized, andthe personal wireless communication systemmeets the demands....As we know, the future generation com-munication system is on the way to bedigitalized, integrated, broadband, intel-ligent, standardized and customized, andthe personal wireless communication systemmeets the demands.ZTE’s personal wireless communicationsystem (ZXPCS) is based on the personalhandset system (PHS) and deployed in morethan 110 cities in China. It is working well andwidely accepted by the carriers, which makesgreat contributions to the local economy and展开更多
With the rapid development of wireless communications systems, different system standards are being merged. Operators take stringent measures to reduce Operational Expenditure (OPEX) and Capital Expenditure (CAPEX...With the rapid development of wireless communications systems, different system standards are being merged. Operators take stringent measures to reduce Operational Expenditure (OPEX) and Capital Expenditure (CAPEX); and as a result, soft base stations supporting multiple standards become the evolutionary tend of wireless base stations. This paper introduces the background of soft base stations and analyzes their architecture design, system modules. The key technologies in system implementation and future directions are also presented.展开更多
This article describes a new miniaturized omni-directional antenna with quasi-self-complementary structure for wireless communication applications. A novel ground structure composed of five rectangular plates is propo...This article describes a new miniaturized omni-directional antenna with quasi-self-complementary structure for wireless communication applications. A novel ground structure composed of five rectangular plates is proposed to enhance the impedance bandwidth and reduce the antenna size. The proposed antenna is comprised of two patches surrounded by the ground structure. Two metal patches of the antenna are located on two opposite sides of the dielectric substrate. The feed patch is used to excite the radiation patch. This unique design is realized by properly choosing the suitable feed patch shape, selecting similar slot shape on the radiation patch, and tuning their dimensions. The proposed antenna with an extremely small size of 6 mm × 9 mm has an operating impedance bandwidth ranging from 4.5 to 6.1 GHz for S<sub>11</sub> < -10 dB, which also covers the two IEEE 802.11a wireless local area network bands (5.15 - 5.35 GHz and 5.725 - 5.825 GHz). In addition to be very small in size, the antenna exhibits omni-directional radiation patterns in the entire operating bandwidth and low cross polarization. The distortionless time domain performance of the antenna is confirmed by investigation of the phase response and group delay. The obtained results in both frequency and time domain show that the proposed antenna is suitable for use in wireless communication systems.展开更多
This work presents a new bendable antenna for worldwide interoperability for microwave access (WiMAX) wireless communication systems. These antennas, transparent and flexible, will be easily integrated into various md...This work presents a new bendable antenna for worldwide interoperability for microwave access (WiMAX) wireless communication systems. These antennas, transparent and flexible, will be easily integrated into various mdia and in particular OLED lighting which could be part of the public lighting network of tomorrow as well as on all display media. The integration of these antennas as close as possible to the end-user is a possible solution to reduce the energy consumption which goes hand in hand with the increase in the data rate. This kind of new antenna, designed to be integrated in organic light-emitting diode (OLED), was modeled from a transparent VeilShieldTM conductive fabric and was placed on a 100% polyester substrate with a thickness of 1.5 mm and a loss tangent of 0.02. We have tested and evaluated the characteristic parameters of our antenna, namely the reflection coefficient, the radiation pattern and the gain, to find out the performance of our proposed design. The performance of the transparent conductive fabric integrated in the 100% polyester substrate is tested for the application of flexible antenna operating at 3.5 GHz with a gain value of 5.38 dB. We have integrated this proposed new antenna with the OLED light source containing four layers of different materials and electrical properties: aluminum cathode layer, polymer layer, indium tin oxide (ITO) anode layer and glass substrate layer. After integration, the resonant frequency shifted to 3.52 GHz with a gain value of 4.61 dB. In addition, we also tested the concave bending on the reflection coefficient of the proposed flexible antenna taking into account the different bending angles. This work demonstrates the possibility of integrating these unconventional materials used for the proposed antenna within the OLED despite weak effects on the resonant frequency and the gain of the proposed antenna after integration.展开更多
The fifth generation(5G) network is expected to support significantly large amount of mobile data traffic and huge number of wireless connections,to achieve better spectrum- and energy-efficiency,as well as quality of...The fifth generation(5G) network is expected to support significantly large amount of mobile data traffic and huge number of wireless connections,to achieve better spectrum- and energy-efficiency,as well as quality of service(QoS) in terms of delay,reliability and security.Furthermore,the 5G network shall also incorporate high mobility requirements as an integral part,providing satisfactory service to users travelling at a speed up to 500 km/h.This paper provides a survey of potential high mobility wireless communication(HMWC) techniques for 5G network.After discussing the typical requirements and challenges of HMWC,key techniques to cope with the challenges are reviewed,including transmission techniques under the fast timevarying channels,network architecture with mobility support,and mobility management.Finally,future research directions on 5G high mobility communications are given.展开更多
Wireless quantum communication networks transfer quantum state by teleportation. Existing research focuses on maximal entangled pairs. In this paper, we analyse the distributed wireless quantum communication networks ...Wireless quantum communication networks transfer quantum state by teleportation. Existing research focuses on maximal entangled pairs. In this paper, we analyse the distributed wireless quantum communication networks with partially entangled pairs. A quantum routing scheme with multi-hop teleportation is proposed. With the proposed scheme, is not necessary for the quantum path to be consistent with the classical path. The quantum path and its associated classical path are established in a distributed way. Direct multi-hop teleportation is conducted on the selected path to transfer a quantum state from the source to the destination. Based on the feature of multi-hop teleportation using partially entangled pairs, if the node number of the quantum path is even, the destination node will add another teleportation at itself. We simulated the performance of distributed wireless quantum communication networks with a partially entangled state. The probability of transferring the quantum state successfully is statistically analyzed. Our work shows that multi-hop teleportation on distributed wireless quantum networks with partially entangled pairs is feasible.展开更多
There is an urgent global need for wireless communication utilizing materials that can provide simultaneous flexibility and high conductivity.Avoiding the harmful effects of electromagnetic(EM)radiation from wireless ...There is an urgent global need for wireless communication utilizing materials that can provide simultaneous flexibility and high conductivity.Avoiding the harmful effects of electromagnetic(EM)radiation from wireless communication is a persistent research hot spot.Two-dimensional(2D)materials are the preferred choice as wireless communication and EM attenuation materials as they are lightweight with high aspect ratios and possess distinguished electronic properties.MXenes,as a novel family of 2D materials,have shown excellent properties in various fields,owing to their excellent electrical conductivity,mechanical stability,high flexibility,and ease of processability.To date,research on the utility of MXenes for wireless communication has been actively pursued.Moreover,MXenes have become the leading materials for EM attenuation.Herein,we systematically review the recent advances in MXene-based materials with different structural designs for wireless communication,electromagnetic interference(EMI)shielding,and EM wave absorption.The relationship governing the structural design and the effectiveness for wireless communication,EMI shielding,and EM wave absorption is clearly revealed.Furthermore,our review mainly focuses on future challenges and guidelines for designing MXene-based materials for industrial application and foundational research.展开更多
The high-speed railway and high-way networks are now expanding at a phenomenal speed in Chinaand in many other parts of the world. The related broadband wireless communication over high-speed trains and highway vehicl...The high-speed railway and high-way networks are now expanding at a phenomenal speed in Chinaand in many other parts of the world. The related broadband wireless communication over high-speed trains and highway vehicles is a very challenging task due to hostile transmission channel conditions. The demand for such services is growing rapidly, following the proliferation of laptop/tablet computers and smart phones. This motivates the research on wireless communications in the high mobility environments.展开更多
Compared with wired communication,the wireless communication link is more vulnerable to be attacked or eavesdropped because of its broadcast nature.To prevent eavesdropping,many researches on transmission techniques o...Compared with wired communication,the wireless communication link is more vulnerable to be attacked or eavesdropped because of its broadcast nature.To prevent eavesdropping,many researches on transmission techniques or cryptographic methods are carried out.This paper proposes a new index parameter named as eavesdropping area,to evaluate the anti-eavesdropping performance of wireless system.Given the locations of legitimate transmitter and receiver,eavesdropping area index describes the total area of eavesdropping regions where messages can be wiretapped in the whole evaluating region.This paper gives detailed explanations about its concept and deduces mathematical formulas about performance curves based on region classification.Corresponding key system parameters are analyzed,including the characteristics of eavesdropping region,transmitted beam pattern,beam direction,receiver sensitivity,eavesdropping sensitivity,path loss exponent and so on.The proposed index can give an insight on the confirmation of high-risk eavesdropping region and formulating optimal transmitting scheme for the confidential communications to decrease the eavesdropping probability.展开更多
Orbital angular momentum(OAM)at radio frequency(RF)has attracted more and more attention as a novel approach of multiplexing a set of orthogonal OAM modes on the same frequency channel to achieve high spectral efficie...Orbital angular momentum(OAM)at radio frequency(RF)has attracted more and more attention as a novel approach of multiplexing a set of orthogonal OAM modes on the same frequency channel to achieve high spectral efficiency(SE).However,the precondition for maintaining the orthogonality among different OAM modes is perfect alignment of the transmit and receive uniform circular arrays(UCAs),which is difficult to be satisfied in practical wireless communication scenarios.Therefore,to achieve available multi-mode OAM broadband wireless communication,we first investigate the effect of oblique angles on the transmission performance of the multi-mode OAM broadband system in the non-parallel misalignment case.Then,we compare the UCA-based RF analog and baseband digital transceiver structures and corresponding beam steering schemes.Mathematical analysis and numerical simulations validate that the SE of the misaligned multi-mode OAM broadband system is quite low,while analog and digital beam steering(DBS)both can significantly improve the SE of the system.However,DBS can obtain higher SE than analog beam steering especially when the bandwidth and the number of array elements are large,which validates that the baseband digital transceiver with DBS is more suitable for multi-mode OAM broadband wireless communication systems in practice.展开更多
基金supported in part by the National Natural Science Foundation of China(Nos.62071441 and 61701464)in part by the Fundamental Research Funds for the Central Universities(No.202151006).
文摘This study explores the application of single photon detection(SPD)technology in underwater wireless optical communication(UWOC)and analyzes the influence of different modulation modes and error correction coding types on communication performance.The study investigates the impact of on-off keying(OOK)and 2-pulse-position modulation(2-PPM)on the bit error rate(BER)in single-channel intensity and polarization multiplexing.Furthermore,it compares the error correction performance of low-density parity check(LDPC)and Reed-Solomon(RS)codes across different error correction coding types.The effects of unscattered photon ratio and depolarization ratio on BER are also verified.Finally,a UWOC system based on SPD is constructed,achieving 14.58 Mbps with polarization OOK multiplexing modulation and 4.37 Mbps with polarization 2-PPM multiplexing modulation using LDPC code error correction.
基金supported in part by National Key Research and Development Program of China(No.2022YFB2803002)National Natural Science Foundation of China(Nos.62235005,62127814,62225405,61975093,61927811,61991443,61925104 and 61974080)Collaborative Innovation Centre of Solid-State Lighting and Energy-Saving Electronics.
文摘This paper presents a wide-bandwidth back-illuminated modified uni-traveling-carrier photodiode(MUTC-PD)packaged with standard WR-5 rectangular waveguide for high-speed wireless communications.With optimized epitaxy structure and coplanar waveguide electrodes,the fabricated 4-μm-diameter PD exhibits ultra-flat frequency response and high saturation power.Integrated passive circuits including low-loss bias-tee and E-plane probe are designed to package the PD into a compact module with waveguide output.The packaged PD module has demonstrated a flat frequency response with fluctuations within±2.75 dB over a broadband of 140-220 GHz and a high saturated output power of-7.8 dBm(166μW)at 140 GHz.For wireless communication applications,the packaged PD is used to implement 1-m free space transmission at carrier frequencies of 150.5 and 210.5 GHz,with transmission rates of 75 and 90 Gbps,respectively.
文摘The Chaotic Baseband Wireless Communication System(CBWCS)is expected to eliminate the Inter-Symbol Interference(ISI)caused by multipath propagation by using the optimal decoding threshold that is the sum of the ISI caused by past decoded bits and the ISI caused by future transmitting bits.However,the current technique is only capable of removing partial effects of the ISI,because only past decoded bits are available for the suboptimal decoding threshold calculation.The unavailability of the future information needed for the optimal decoding threshold is an obstacle to further improve the Bit Error Rate(BER)performance.In contrast to the previous method using Echo State Network(ESN)to predict one future bit,the proposed method in this paper predicts the optimal decoding threshold directly using ESN.The proposed ESN-based threshold prediction method simplifies the symbol decoding operation by avoiding the iterative prediction of the output waveform points using ESN and accumulated error caused by the iterative operation.With this approach,the calculation complexity is reduced compared to the previous ESN-based approach.The proposed method achieves better BER performance compared to the previous method.The reason for this superior result is twofold.First,the proposed ESN is capable of using more future symbols information conveyed by the ESN input to obtain more accurate threshold rather than the previous method in which only one future symbol was available.Second,the proposed method here does not need to estimate the channel information using Least Squared(LS)method,which avoids the extra error caused by inaccurate channel information estimation.Simulation results and experiment based on a wireless open-access research platform under a practical wireless channel show the effectiveness and superiority of the proposed method.
基金supported by the National Natural Science Foundation of China(61674049,U19A2053)State Key Lab of ASIC and System(2019KF003)the Fundamental Research Funds for Central Universities(JZ2019HGTB0092)。
文摘Traditional magnetically coupled resonant wireless power transfer technology uses fixed distances between coils for research,to prevent fluctuations in the receiving voltage,and lead to reduce transmission efficiency.This paper proposes a closed-loop control wireless communication wireless power transfer system with a wearable four-coil structure to stabilize the receiving voltage fluctuation caused by changes in the displacement between the coils.Test results show that the system can provide stable receiving voltage,no matter how the distance between the transmitting coil and the receiving coil is changed.When the transmission distance is 20 mm,the power transfer efficiency of the system can reach 18.5%under the open-loop state,and the stimulus parameters such as the stimulation period and pulse width can be adjusted in real time through the personal computer terminal.
基金supported by the Key Project of Chinese Ministry of Education(No.212168)
文摘To reduce the network deployment cost and provide voice, message and low rate data services in remote pastoral areas of Tibet effectively, an integrated wireless communication system utilizing MANET(Mobile Ad hoc Network) is proposed. The sparse mobile devices, assisted with the solar-powered multi-functional standing stations mainly on networking maintenance and routing arrangement, self-organize into a MANET. The topology of the standing stations is designed for networking robust and to simplify the routing method and energy strategy. Then in the OMNe T++(Objective Modular Network Test bed in C++) simulation, the energy consumption is analysis while adjusting routing with the different energy status of the standing stations. The result shows that the standing stations should adjust routing as well as control the mobile devices' activity level according to the energy states of the standing stations and their adjacent mobile devices.
文摘At 12.8 MHz center frequency,the advanced miniaturized polymer-based planar high quality factor(Q)passive elements embedded bandpassfilter works in the L-band.Because most of the demands operate inside the spectrum,the wideband or high-speed operation necessary to enhance must be acquired in microwave frequency ranges.The channel has a quiet,high-performance micro-filter with wideband rejection.Capacitors and inductors are used in the high quality factor(Q)passive components,and related networks are incorporated in thefilter.Embedded layers are concatenated using Three-Dimensional Integrated Circuit(3D-IC)integration,parasitics are removed,and interconnection losses are negotiated using de-embedding methods.A wireless application-based Liquid Crystalline Polymer(LCP)viewpoint is employed as a substrate material in this work.The polymer processes,their properties,and the incorporated high-Q Band Pass Filter Framework.The suggestedfilter model is computed and manufactured utilizing the L-band frequency spectrum,decreasing total physical length by 31%while increasing bandwidth by 45%.
基金This publication is an outcome of the R&D work undertaken project under the Visvesvaraya PhD Scheme(Grant No.Ph.D-MLA/4(16))of Ministry of Electronics&Information Technology,Government of India,being implemented by Digital India Corporation.
文摘The Optical Wireless Communication(OWC)offers the high capacity of optical fiber communication with the flexibility of wireless communication.Since it works in the optical region of the ElectroMagnetic(EM)spectrum,it guarantees safety and security which are critical in radio and microwave frequency communication.The principal objective of this paper is to analyze the indoor OWC systems on these guaranteed features,and safety and security are jointly denoted by the term green.The high obstacle impermeability of optical signals and their directivity strengthen the security of indoor OWC data transmission.The confidentiality and authenticity of optical wireless data can also be preserved with the Quantum Key Distribution(QKD).This paper provides a technological overview and a review of literature about the OWC system that helps to identify the challenges in the path of a ubiquitous deployment of green wireless communication systems.Significant advancements in the sources and detectors are discussed together with the coding,modulation and multiplexing techniques for making highly robust OWC links.The ubiquitous deployment of green OWC necessitates the development of optical transmitters and receivers,performance enhancement techniques,incorporation of uplink and energy harvesting abilities,and safety and security enhancement techniques.Hence,a special emphasis is placed on these aspects and their challenges towards the green implementation.Furthermore,the paper explores some significant indoor applications based on the OWC that have great impacts on the Next Generation Networks(NGN)and the Internet of Things(IoT).
基金Project supported by the National Natural Science Foundation of China(Grant Nos.U1806202,61773010,and 61903207)the International Collaborative Research Project of Qilu University of Technology(Grant No.QLUTGJHZ2018020)Major Scientific and Technological Innovation Projects of Shandong Province,China(Grant Nos.2019JZZY010731 and 2020CXGC010901).
文摘As the competition for marine resources is increasingly fierce,the security of underwater acoustic communication has attracted a great deal of attention.The information and location of the communicating platform can be leaked during the traditional underwater acoustic communication technology.According to the unique advantages of chaos communication,we put forward a novel communication scheme using complex parameter modulation and the complex Lorenz system.Firstly,we design a feedback controller and parameter update laws in a complex-variable form with rigorous mathematical proofs(while many previous references on the real-variable form were only special cases in which the imaginary part was zero),which can be realized in practical engineering;then we design a new communication scheme employing parameter modulation.The main parameter spaces of the complex Lorenz system are discussed,then they are adopted in our communication scheme.We also find that there exist parametric attractors in the complex Lorenz system.We make numerical simulations in two channels for digital signals and the simulations verify our conclusions.
基金supported by the National Science Foundation(NSF)(Grant No.EEC-1449501).
文摘The internet of the underground things(IoUT)is an emerging field that concerns connected underground sensing nodes and can find applications in various fields such as geotechnical engineering,precision agriculture,and search and rescue operations.The complex underground environment and multiphase nature of the soil pose challenges to wireless underground communication.Most existing studies on wireless underground communication focus on the use of electromagnetic waves.However,as a highly lossy material for electromagnetic waves,soil can limit the range and reliability of data transmission.Inspired by subterranean animals that rely on vibrations or seismic waves for underground communication,the prototype system developed in this study is based on vibration.This system includes a bioinspired vibrating source,a micro-electromechanical system(MEMS)accelerometer,a microcontroller,and a set of algorithms for encoding and decoding information.Specifically,the mole ratsinspired source is small in size,low in cost,and energy-efficient.An on-off-keying decoding algorithm enhanced with an error-correction algorithm is found to be robust in transmitting textual and imaginary information.With the current design,a maximum transmission bit rate of 16e17 bits per second and a transmission distance of 80 cm can be achieved.The bit error ratio is as low as 0.1%,demonstrating the robustness of the algorithms.The performance of the developed system shows that seismic waves produced by vibration can be used as an information carrier and can potentially be implemented in the IoUT.
基金supported by the National Natura Science Foundation of China (NSFC), No.51607146China National Major Science and Technology Projects 2010ZX06004-013-04-02 and 2012ZX06002-017-02-01+1 种基金Sichuan Science and Technology Program,No.2018GZ0391Sichuan Hydropower Energy and power equipment technology Engineering Research Center, Xihua university, Chengdu 610039, China,No.SDNY2020-001
文摘In this study,a real-time rotor temperature monitoring system for large turbogenerators using SmartMesh IP wireless network communication technology was designed and tested.The system is capable of providing comprehensive,accurate,continuous,and reliable real-time temperature monitoring for turbogenerators.Additionally,it has demonstrated satisfactory results in a real-time monitoring test of the rotor temperature of various famous large-scale turbogenerators and giant nuclear power half-speed turbogenerators designed and manufactured in China.The development and application of this wireless temperature measurement system would aid in improving the intelligent operation quality,safety,and stability of China’s large turbine generators and even the entire power system.
文摘As we know, the future generation com-munication system is on the way to bedigitalized, integrated, broadband, intel-ligent, standardized and customized, andthe personal wireless communication systemmeets the demands.ZTE’s personal wireless communicationsystem (ZXPCS) is based on the personalhandset system (PHS) and deployed in morethan 110 cities in China. It is working well andwidely accepted by the carriers, which makesgreat contributions to the local economy and
文摘With the rapid development of wireless communications systems, different system standards are being merged. Operators take stringent measures to reduce Operational Expenditure (OPEX) and Capital Expenditure (CAPEX); and as a result, soft base stations supporting multiple standards become the evolutionary tend of wireless base stations. This paper introduces the background of soft base stations and analyzes their architecture design, system modules. The key technologies in system implementation and future directions are also presented.
文摘This article describes a new miniaturized omni-directional antenna with quasi-self-complementary structure for wireless communication applications. A novel ground structure composed of five rectangular plates is proposed to enhance the impedance bandwidth and reduce the antenna size. The proposed antenna is comprised of two patches surrounded by the ground structure. Two metal patches of the antenna are located on two opposite sides of the dielectric substrate. The feed patch is used to excite the radiation patch. This unique design is realized by properly choosing the suitable feed patch shape, selecting similar slot shape on the radiation patch, and tuning their dimensions. The proposed antenna with an extremely small size of 6 mm × 9 mm has an operating impedance bandwidth ranging from 4.5 to 6.1 GHz for S<sub>11</sub> < -10 dB, which also covers the two IEEE 802.11a wireless local area network bands (5.15 - 5.35 GHz and 5.725 - 5.825 GHz). In addition to be very small in size, the antenna exhibits omni-directional radiation patterns in the entire operating bandwidth and low cross polarization. The distortionless time domain performance of the antenna is confirmed by investigation of the phase response and group delay. The obtained results in both frequency and time domain show that the proposed antenna is suitable for use in wireless communication systems.
文摘This work presents a new bendable antenna for worldwide interoperability for microwave access (WiMAX) wireless communication systems. These antennas, transparent and flexible, will be easily integrated into various mdia and in particular OLED lighting which could be part of the public lighting network of tomorrow as well as on all display media. The integration of these antennas as close as possible to the end-user is a possible solution to reduce the energy consumption which goes hand in hand with the increase in the data rate. This kind of new antenna, designed to be integrated in organic light-emitting diode (OLED), was modeled from a transparent VeilShieldTM conductive fabric and was placed on a 100% polyester substrate with a thickness of 1.5 mm and a loss tangent of 0.02. We have tested and evaluated the characteristic parameters of our antenna, namely the reflection coefficient, the radiation pattern and the gain, to find out the performance of our proposed design. The performance of the transparent conductive fabric integrated in the 100% polyester substrate is tested for the application of flexible antenna operating at 3.5 GHz with a gain value of 5.38 dB. We have integrated this proposed new antenna with the OLED light source containing four layers of different materials and electrical properties: aluminum cathode layer, polymer layer, indium tin oxide (ITO) anode layer and glass substrate layer. After integration, the resonant frequency shifted to 3.52 GHz with a gain value of 4.61 dB. In addition, we also tested the concave bending on the reflection coefficient of the proposed flexible antenna taking into account the different bending angles. This work demonstrates the possibility of integrating these unconventional materials used for the proposed antenna within the OLED despite weak effects on the resonant frequency and the gain of the proposed antenna after integration.
基金supported by the National Basic Research Program of China (973 Program No.2012CB316100)
文摘The fifth generation(5G) network is expected to support significantly large amount of mobile data traffic and huge number of wireless connections,to achieve better spectrum- and energy-efficiency,as well as quality of service(QoS) in terms of delay,reliability and security.Furthermore,the 5G network shall also incorporate high mobility requirements as an integral part,providing satisfactory service to users travelling at a speed up to 500 km/h.This paper provides a survey of potential high mobility wireless communication(HMWC) techniques for 5G network.After discussing the typical requirements and challenges of HMWC,key techniques to cope with the challenges are reviewed,including transmission techniques under the fast timevarying channels,network architecture with mobility support,and mobility management.Finally,future research directions on 5G high mobility communications are given.
基金Project supported by the Science Fund for Creative Research Groups of the National Natural Science Foundation of China (Grant No. 60921063) and the National High Technology Research and Development Program of China (Grant No. 2013AA013601).
文摘Wireless quantum communication networks transfer quantum state by teleportation. Existing research focuses on maximal entangled pairs. In this paper, we analyse the distributed wireless quantum communication networks with partially entangled pairs. A quantum routing scheme with multi-hop teleportation is proposed. With the proposed scheme, is not necessary for the quantum path to be consistent with the classical path. The quantum path and its associated classical path are established in a distributed way. Direct multi-hop teleportation is conducted on the selected path to transfer a quantum state from the source to the destination. Based on the feature of multi-hop teleportation using partially entangled pairs, if the node number of the quantum path is even, the destination node will add another teleportation at itself. We simulated the performance of distributed wireless quantum communication networks with a partially entangled state. The probability of transferring the quantum state successfully is statistically analyzed. Our work shows that multi-hop teleportation on distributed wireless quantum networks with partially entangled pairs is feasible.
基金National Natural Science Foundation of China(Nos.11774027,51132002,51977009 and 51372282).
文摘There is an urgent global need for wireless communication utilizing materials that can provide simultaneous flexibility and high conductivity.Avoiding the harmful effects of electromagnetic(EM)radiation from wireless communication is a persistent research hot spot.Two-dimensional(2D)materials are the preferred choice as wireless communication and EM attenuation materials as they are lightweight with high aspect ratios and possess distinguished electronic properties.MXenes,as a novel family of 2D materials,have shown excellent properties in various fields,owing to their excellent electrical conductivity,mechanical stability,high flexibility,and ease of processability.To date,research on the utility of MXenes for wireless communication has been actively pursued.Moreover,MXenes have become the leading materials for EM attenuation.Herein,we systematically review the recent advances in MXene-based materials with different structural designs for wireless communication,electromagnetic interference(EMI)shielding,and EM wave absorption.The relationship governing the structural design and the effectiveness for wireless communication,EMI shielding,and EM wave absorption is clearly revealed.Furthermore,our review mainly focuses on future challenges and guidelines for designing MXene-based materials for industrial application and foundational research.
基金supported by the Major State Basic Research Development Program of China(973 Program No.2012CB316100)the National Natural Science Foundation of China(NSFC No.61032002)the Innovative Intelligence Base Project(111 Project No.111-2-14)
文摘The high-speed railway and high-way networks are now expanding at a phenomenal speed in Chinaand in many other parts of the world. The related broadband wireless communication over high-speed trains and highway vehicles is a very challenging task due to hostile transmission channel conditions. The demand for such services is growing rapidly, following the proliferation of laptop/tablet computers and smart phones. This motivates the research on wireless communications in the high mobility environments.
文摘Compared with wired communication,the wireless communication link is more vulnerable to be attacked or eavesdropped because of its broadcast nature.To prevent eavesdropping,many researches on transmission techniques or cryptographic methods are carried out.This paper proposes a new index parameter named as eavesdropping area,to evaluate the anti-eavesdropping performance of wireless system.Given the locations of legitimate transmitter and receiver,eavesdropping area index describes the total area of eavesdropping regions where messages can be wiretapped in the whole evaluating region.This paper gives detailed explanations about its concept and deduces mathematical formulas about performance curves based on region classification.Corresponding key system parameters are analyzed,including the characteristics of eavesdropping region,transmitted beam pattern,beam direction,receiver sensitivity,eavesdropping sensitivity,path loss exponent and so on.The proposed index can give an insight on the confirmation of high-risk eavesdropping region and formulating optimal transmitting scheme for the confidential communications to decrease the eavesdropping probability.
基金supported by the Natural Science Basic Research Program of Shaanxi(2021JZ-18)the Natural Science Foundation of Guangdong Province of China(2021A1515010812)+1 种基金the Open Research Fund of National Mobile Communications Research Laboratory,Southeast University(2021D04)the Fundamental Research Funds for Central Universities,and the Innovation Fund of Xidian University。
文摘Orbital angular momentum(OAM)at radio frequency(RF)has attracted more and more attention as a novel approach of multiplexing a set of orthogonal OAM modes on the same frequency channel to achieve high spectral efficiency(SE).However,the precondition for maintaining the orthogonality among different OAM modes is perfect alignment of the transmit and receive uniform circular arrays(UCAs),which is difficult to be satisfied in practical wireless communication scenarios.Therefore,to achieve available multi-mode OAM broadband wireless communication,we first investigate the effect of oblique angles on the transmission performance of the multi-mode OAM broadband system in the non-parallel misalignment case.Then,we compare the UCA-based RF analog and baseband digital transceiver structures and corresponding beam steering schemes.Mathematical analysis and numerical simulations validate that the SE of the misaligned multi-mode OAM broadband system is quite low,while analog and digital beam steering(DBS)both can significantly improve the SE of the system.However,DBS can obtain higher SE than analog beam steering especially when the bandwidth and the number of array elements are large,which validates that the baseband digital transceiver with DBS is more suitable for multi-mode OAM broadband wireless communication systems in practice.