Efficient and Stable Perovskite Solar Cells and Modules Enabled by Tailoring Additive Distribution According to the Film Growth Dynamics

Gas quenching and vacuum quenching process are widely applied to accelerate solvent volatilization to induce nucleation of perovskites in blade-coating method.In this work,we found these two pre-crystallization processes lead to different order of crystallization dynamics within the perovskite thin film,resulting in the differences of additive distribution.We then tailor-designed an additive molecule named 1,3-bis(4-methoxyphenyl)thiourea to obtain films with fewer defects and holes at the buried interface,and prepared perovskite solar cells with a certified efficiency of 23.75%.Furthermore,this work also demonstrates an efficiency of 20.18%for the large-area perovskite solar module(PSM)with an aperture area of 60.84 cm^(2).The PSM possesses remarkable continuous operation stability for maximum power point tracking of T_(90)>1000 h in ambient air.

Designing ultrastable P2/O3-type layered oxides for sodium ion batteries by regulating Na distribution and oxygen redox chemistry

P2/O3-type Ni/Mn-based layered oxides are promising cathode materials for sodium-ion batteries(SIBs)owing to their high energy density.However,exploring effective ways to enhance the synergy between the P2 and 03 phases remains a necessity.Herein,we design a P2/O3-type Na_(0.76)Ni_(0.31)Zn_(0.07)Mn_(0.50)Ti_(0.12)0_(2)(NNZMT)with high chemical/electrochemical stability by enhancing the coupling between the two phases.For the first time,a unique Na*extraction is observed from a Na-rich O3 phase by a Na-poor P2 phase and systematically investigated.This process is facilitated by Zn^(2+)/Ti^(4+)dual doping and calcination condition regulation,allowing a higher Na*content in the P2 phase with larger Na^(+)transport channels and enhancing Na transport kinetics.Because of reduced Na^(+)in the O3 phase,which increases the difficulty of H^(+)/Na^(+) exchange,the hydrostability of the O3 phase in NNZMT is considerably improved.Furthermore,Zn^(2+)/Ti^(4+)presence in NNZMT synergistically regulates oxygen redox chemistry,which effectively suppresses O_(2)/CO_(2) gas release and electrolyte decomposition,and completely inhibits phase transitions above 4.0 V.As a result,NNZMT achieves a high discharge capacity of 144.8 mA h g^(-1) with a median voltage of 3.42 V at 20 mA g^(-1) and exhibits excellent cycling performance with a capacity retention of 77.3% for 1000 cycles at 2000 mA g^(-1).This study provides an effective strategy and new insights into the design of high-performance layered-oxide cathode materials with enhanced structure/interface stability forSIBs.

Distribution and sources of sedimentary organic matter in different aquaculture areas of northeastern Zhanjiang Bay using stable carbon and nitrogen isotopes

Zhanjiang Bay is a major aquaculture area in China with many types of mariculture products(such as oysters,fish,and shrimp).The culture area and shrimp output in Zhanjiang Bay are ranked first in China.We investigated the total organic carbon(TOC),total nitrogen(TN),TOC/TN ratio,and stable isotopes(δ^(13)C and δ^(15)N) of the fish and shrimp feed,fish and shrimp feces,and sedimentary organic matter(SOM) in and around different aquaculture areas of northeastern Zhanjiang B ay to study the impact of aquaculture activities on SOM.The average TOC contents of fish and shrimp feed were 39.20%±0.91% and 39.29%±0.21%,respectively.The average TOC content in the surface sediments of the oyster culture area,the mixed(fish and shrimp) culture area,and the cage fish farm area were 0.66%,0.88%±0.10%,and 0.58%±0.19%,respectively,which may indicate that mixed culture had a greater impact on SOM.The relatively high TOC and TN contents and relatively low TOC/TN ratios,and δ^(15)N values in the upper layer of the core sediment in the mixed culture area could also support the significant influence of mixed culture.The average δ^(13)C and δ^(15)N values of fish and shrimp feed were -20.6‰±2.2‰ and 1.8‰±1.2‰,respectively,which were different from the isotopic values of SOM in the study area.δ^(13)C and δ^(15)N values for SOM in different aquaculture areas were different from those of nearby reference stations,probably reflecting the influence of aquaculture.The δ^(13)C and δ^(15)N values in the oyster culture area(-25.9‰ and6.0‰,respectively) seemed to have reduced δ^(13)C and enriched δ^(15)N relative to those of the reference station(-24.6‰ and 5.8‰,respectively).This may reflect the influence of organic matter on oyster culture.The δ^(15)N value of the station in the mixed culture area(7.1‰±0.4‰) seemed to be relatively enriched in δ^(15)N relative to that of the reference station(6.6‰).Sedimentation and the subsequent degradation of organic matter from mixed cultures may have contributed to this phenomenon.The surface sediment at the cage fish farm area seemed to be affected by fish feces and primary production based on the indication of δ^(13)C and δ^(15)N values.The sediment core at the mixed culture region(NS6) had lower TOC/TN ratios and more positive δ^(13)C and δ^(15)N values than the sediment core at the oyster culture area,suggesting a higher proportionate contribution of marine organic matter in the mixed culture area.In summary,oyster culture,mixed culture,and cage fish culture in northeastern Zhanjiang Bay had a certain degree of impact on SOM,and mixed culture had more significant influences on SOM based on the high TOC contents and the significant vertical variations of TOC/TN ratio and δ^(15)N value in the sediment of this area.This study provides new insights into the impact of aquaculture activities on SOM content.

Stable reverse J-shaped diameter distribution occurs in an old-growth karst forest

The reverse J-shaped diameter distribution is considered an inherent attribute of natural forests,cru-cial for forest resource utilization and community stability.However,in karst regions,intense habitat heterogeneity might alter species composition,spatial distribution,growth,biomass allocation,and mortality processes,yet its impact on diameter structure remains unclear.A fixed plot of 200 m×110 m was established in the Nanpan River Basin,Southwest China,within an old-growth oak forest(>300 years old),and the influence of site substrates(i.e.,rock and soil),topographic factors,sample area,and orientation on diameter distribution was analyzed.Trees on both rock and soil exhibited a reverse-J shape,quantifiable Project funding:This work was supported by the National Natural Science Foundation of China(32060340 and 31400542),the Scientific Research Capacity Building Project for Laibin Jinxiu Dayaoshan Forest Ecosystem Observation and Research Station of Guangxi(22-035-130-01).through the Weibull function.The substrates had a similar density,approximately 2100 plants/ha.However,the average and range of diameter of trees on rock were smaller than those on soil,suggesting that rock constrains tree growth.The diameter distribution of trees across microtopography also displayed a reverse-J shape.Yet,higher elevations and sunny slopes showed a greater curvature of diameter classes compared to lower elevations and shady slopes,indicating habitat preferences in karst trees.Sample area and orientation had minimal effects on diameter class curve that reached stability when the plot size was 6000 m2.These results suggest that the reverse J-shaped diameter distribution prevails at small scales in karst old-growth forests,encompassing multiple curvatures and spanning forest ecosystems.

Stable zinc metal anodes achieved by dynamic counteracting tip effect and interfacial ion redistribution

Aqueous zinc metal batteries (AZMBs) are hindered by uncontrolled dendrites and side reactions during commercialization,despite their advantages of safety and high capacity density.Herein,we propose the electrical feedback strategy to restrain the Zn dendrites resulting from the"tip effect"and optimize interfacial Zn^(2+)distribution to accelerate electrodeposition kinetics by using the lithium niobate (LNO) layer.Specifically,at the bumps of the zinc anode,the ferroelectric LNO is polarized by the locally strong electric field,which in turn counteracts the"tip effect".In this way,the dynamic polarization of LNO can repair the uneven tip electric field to achieve uniform and flat zinc deposition.In addition,owing to the interaction between Nb and Zn^(2+),a higher concentration of Zn^(2+)near the zincophilic LNO@Zn surface is obtained for the rapid electrochemical reaction kinetics of plating.Considering the aforementioned advantages,the LNO@Zn anode harvests stable cycling over 1200 h at 10 mA cm^(-2)with a superior cumulative capacity of 5800 mAh cm^(-2).Assembled with the a-MnO_(2) cathode,the full cell using LNO@Zn anode exhibits the slower capacity decay (0.054%per cycle) during 1000 cycles.This strategy provides a perspective for stabilizing zinc metal anodes through dynamic electrical response and interfacial ion redistribution effect.

The Limit Distribution of Stochastic Evolution Equations Driven by-Stable Non-Gaussian Noise

We study the distribution limit of a class of stochastic evolution equation driven by an additive-stable Non-Gaussian process in the case of α∈(1,2).We prove that,under suitable conditions,the law of the solution converges weakly to the law of a stochastic evolution equation with an additive Gaussian process.

Laser‑Induced Highly Stable Conductive Hydrogels for Robust Bioelectronics

Despite the promising progress in conductive hydrogels made with pure conducting polymer,great challenges remain in the interface adhesion and robustness in longterm monitoring.To address these challenges,Prof.Seung Hwan Ko and Taek-Soo Kim’s team introduced a laserinduced phase separation and adhesion method for fabricating conductive hydrogels consisting of pure poly(3,4-ethylenedioxythiophene):polystyrene sulfonate on polymer substrates.The laser-induced phase separation and adhesion treated conducting polymers can be selectively transformed into conductive hydrogels that exhibit wet conductivities of 101.4 S cm^(−1) with a spatial resolution down to 5μm.Moreover,they maintain impedance and charge-storage capacity even after 1 h of sonication.The micropatterned electrode arrays demonstrate their potential in long-term in vivo signal recordings,highlighting their promising role in the field of bioelectronics.

Differential distribution of PINK1 and Parkin in the primate brain implies distinct roles

The vast majority of in vitro studies have demonstrated that PINK1 phosphorylates Parkin to work together in mitophagy to protect against neuronal degeneration.However,it remains largely unclear how PINK1 and Parkin are expressed in mammalian brains.This has been difficult to address because of the intrinsically low levels of PINK1 and undetectable levels of phosphorylated Parkin in small animals.Understanding this issue is critical for elucidating the in vivo roles of PINK1 and Parkin.Recently,we showed that the PINK1 kinase is selectively expressed as a truncated form(PINK1–55)in the primate brain.In the present study,we used multiple antibodies,including our recently developed monoclonal anti-PINK1,to validate the selective expression of PINK1 in the primate brain.We found that PINK1 was stably expressed in the monkey brain at postnatal and adulthood stages,which is consistent with the findings that depleting PINK1 can cause neuronal loss in developing and adult monkey brains.PINK1 was enriched in the membrane-bound fractionations,whereas Parkin was soluble with a distinguishable distribution.Immunofluorescent double staining experiments showed that PINK1 and Parkin did not colocalize under physiological conditions in cultured monkey astrocytes,though they did colocalize on mitochondria when the cells were exposed to mitochondrial stress.These findings suggest that PINK1 and Parkin may have distinct roles beyond their well-known function in mitophagy during mitochondrial damage.

Effects of aggregate size distribution and carbon nanotubes on the mechanical properties of cemented gangue backfill samples under true triaxial compression

The mechanical behavior of cemented gangue backfill materials(CGBMs)is closely related to particle size distribution(PSD)of aggregates and properties of cementitious materials.Consequently,the true triaxial compression tests,CT scanning,SEM,and EDS tests were conducted on cemented gangue backfill samples(CGBSs)with various carbon nanotube concentrations(P_(CNT))that satisfied fractal theory for the PSD of aggregates.The mechanical properties,energy dissipations,and failure mechanisms of the CGBSs under true triaxial compression were systematically analyzed.The results indicate that appropriate carbon nanotubes(CNTs)effectively enhance the mechanical properties and energy dissipations of CGBSs through micropore filling and microcrack bridging,and the optimal effect appears at P_(CNT)of 0.08wt%.Taking PSD fractal dimension(D)of 2.500 as an example,compared to that of CGBS without CNT,the peak strength(σ_(p)),axial peak strain(ε_(1,p)),elastic strain energy(Ue),and dissipated energy(U_(d))increased by 12.76%,29.60%,19.05%,and90.39%,respectively.However,excessive CNTs can reduce the mechanical properties of CGBSs due to CNT agglomeration,manifesting a decrease inρ_(p),ε_(1,p),and the volumetric strain increment(Δε_(v))when P_(CNT)increases from 0.08wt%to 0.12wt%.Moreover,the addition of CNTs improved the integrity of CGBS after macroscopic failure,and crack extension in CGBSs appeared in two modes:detour and pass through the aggregates.Theσ_(p)and U_(d)firstly increase and then decrease with increasing D,and porosity shows the opposite trend.Theε_(1,p)andΔε_(v)are negatively correlated with D,and CGBS with D=2.150 has the maximum deformation parameters(ε_(1,p)=0.05079,Δε_(v)=0.01990)due to the frictional slip effect caused by coarse aggregates.With increasing D,the failure modes of CGBSs are sequentially manifested as oblique shear failure,"Y-shaped"shear failure,and conjugate shear failure.

Data driven prediction of fragment velocity distribution under explosive loading conditions

This study presents a machine learning-based method for predicting fragment velocity distribution in warhead fragmentation under explosive loading condition.The fragment resultant velocities are correlated with key design parameters including casing dimensions and detonation positions.The paper details the finite element analysis for fragmentation,the characterizations of the dynamic hardening and fracture models,the generation of comprehensive datasets,and the training of the ANN model.The results show the influence of casing dimensions on fragment velocity distributions,with the tendencies indicating increased resultant velocity with reduced thickness,increased length and diameter.The model's predictive capability is demonstrated through the accurate predictions for both training and testing datasets,showing its potential for the real-time prediction of fragmentation performance.

Effects of Long-Term Fertilization on the Distribution of Carbon, Nitrogen and Phosphorus in Water-Stable Aggregates in Paddy Soil

We investigated the size distribution of water-stable aggregates and the soil carbon, nitrogen and phosphorus concentration over aggregate size fractions based on a long-term （1990-2006） fertilization experiment in a reddish paddy soil. The results showed that the largest water-stable aggregate （WSA） （〉5 mm） and the smallest WSA （〈0.25 mm） took up the first largest proportion （38.3%） and the second largest proportion （23.3%）, respectively. Application of organic materials increased the proportion of the large WSA （〉2 mm） and decreased the proportion of the small WSA （〈1 ram）, resulting in an increase in the mean weight diameter of WSA, whereas application of chemical fertilizer had little effect. Application of organic materials, especially combined with chemical fertilizers, increased total carbon, nitrogen and phosphorus concentrations in all sizes of WSA, and total carbon, nitrogen and phosphorus were prone to concentrate in the large WSA. Further more, application of organic materials improved the supply effectiveness of available phosphorus, whereas had little influence on the labile carbon in WSA. Application of chemical fertilizers improved concentrations of total and available phosphorus in all sizes of WSA, whereas had little influence on total carbon and nitrogen contents. Economical fertilization model maintained the soil fertility when compared with full dose of chemical fertilizers, indicating that using organic materials could reduce chemical fertilizers by about one third.

Estimating distribution of water uptake with depth of winter wheat by hydrogen and oxygen stable isotopes under different irrigation depths

Crop root system plays an important role in the water cycle of the soil-plant-atmosphere continuum. In this study, com- bined isotope techniques, root length density and root cell activity analysis were used to investigate the root water uptake mechanisms of winter wheat （Triticum aesfivum L.） under different irrigation depths in the North China Plain. Both direct inference approach and multisource linear mixing model were applied to estimate the distribution of water uptake with depth in six growing stages. Results showed that winter wheat under land surface irrigation treatment （Ts） mainly absorbed water from 10-20 cm soil layers in the wintering and green stages （66.9 and 72.0%, respectively）; 0-20 cm （57.0%） in the jointing stage; 0-40 （15.3%） and 80-180 cm （58.1%） in the heading stage; 60-80 （13.2%） and 180-220 cm （35.5%） in the filling stage; and 0-40 （46.8%） and 80-100 cm （31.0%） in the ripening stage. Winter wheat under whole soil layers irrigation treatment （Tw） absorbed more water from deep soil layer than Ts in heading, filling and ripening stages. Moreover, root cell activity and root length density of winter wheat under TW were significantly greater than that of Ts in the three stages. We concluded that distribution of water uptake with depth was affected by the availability of water sources, the root length density and root cell activity. Implementation of the whole soil layers irrigation method can affect root system distribution and thereby increase water use from deeper soil and enhance water use efficiency.

A NEW CORRENTROPY BASED TDE METHOD UNDER α-STABLE DISTRIBUTION NOISE ENVIRONMENT

This paper presents a robust time delay estimation algorithm for the α-Stable noise based on correntropy. Many time delay estimation algorithms derived for impulsive stable noise are based on the theory of Fractional Lower Order Statistics (FLOS). Unlike previously introduced FLOS-type algorithms, the new algorithm is proposed to estimate the time delay by maximizing the generalized correlation function of two observed signals needing neither prior information nor estimation of the numerical value of the stable noise's characteristic exponent. An interval for kernel selection is found for a wide range of characteristic exponent values of α-Stable distribution. Simulations show the proposed algorithm offers superior performance over the existing covariation time delay estimation, least mean p-norm time delay estimation and achieves slightly improved performance than fractional lower order covariance time delay estimation at lower signal to noise ratio when the noise is highly impulsive.

Stable isotope(δ^(13)C_(ker),δ^(13)C_(carb),δ^(18)O_(carb)) distribution along a Cambrian outcrop section in the eastern Tarim Basin,NW China and its geochemical significance

This study investigated the geochemical features of the lower Paleozoic strata of Yaerdang Mountain outcrop along with the core samples from well TD2∈ in the eastern Tarim Basin,NW China.The total organic carbon abundance,hydrocarbon-generating precursor biospecies,and stable isotope ratios of organics and carbonate（δ13Cker,δ13Ccarb and δ18Ocarb） were comprehensively studied for their possible correlative constraints during sedimentary evolution.The results revealed that the δ13Cker（VPDB） of Cambrian kerogens along the outcrop section varied from-34.6‰ to-28.4‰,indicating an increasing tendency from the lower Cambrian to the upper Cambrian.This was on the whole accompanied by the variation in the δ13Ccarb and δ18Ocarb along the profile,which might be associated with the changes in the sea level and also in the compositional variation of benthic and planktonic biomass.The large variation in the stable carbon isotope ratios up to 6‰ along the outcrop section reflected the heterogeneity of the Cambrian source rocks from the eastern Tarim Basin.Hence,the 13C-enriched crude oils from well TD2∈might have been derived from a localized stratum of Cambrian source rocks.The results from this study showed the possibility of multiple source kitchens in the Cambrian-lower Ordovician portion of Tarim Basin.

Distribution features of stable oxygen isotopes in the typical monsoon temperate-glacier region, Mountain Yulong in China

During the summers of 1999 and 2000, sampling was carried out in Mt. Yulong, for the investigation of the spatial distribution of oxygen stable isotope in the atmospheric glacial hydro system and similar results obtained in the two years have confirmed our conclusion. There is an evident negative correlation between stable isotopic composition and air temperature precipitation amount, suggesting that there exits a strong 'precipitation amount effect' in this typical monsoon temperate glacier region. There are marked differences between the δ 18 O values in winter accumulated snow, glacial meltwater, summer precipitation and glacier feeding stream. Under the control of varied climatic conditions, spatial and temporal variations of above glacial hydro mediums are apparent. Isotopic depletion or fractionation and ionic changes had occurred during the phase change and transformation processes of snow ice, ice meltwater, flowing of runoff and contact with bedrock. The variation of stable isotope in a runoff can reflect not only its own flowing process but also its different feeding sources.

Pore Size Distribution and Its Quantitative Relationship with Strength of Corundum Based Castables

A series of corundum based castables with 0,2%,4%,6%,and 8% α-Al2O3 micropowders were prepared using tabular alumina aggregates （6-3,3-1 and ≤1 mm） and fines （≤0.088 and ≤0.045 mm）,calcium aluminate cement,and α-Al2O3 micropowders （d50=1.754 μm） as starting materials. Cold mechanical strength and pore size distribution of the castables specimens after heat treatment at 110,1 100 and 1 500 ℃ were tested,respectively. The quantitative relationship between strength and apparent porosity,and that between strength and median pore diameter were verified by Atzeni equation. The correlation between interval of pore size and mechanical strength of specimens was also studied by means of gray relational theory. The results show that：（1） the pore size distribution of castables is strongly influenced by both micropowders filling and matrix sintering; the addition of micropowders decreases median pore diameter while the sintering process increases it; （2） when adding a constant correction term,Atzeni equation can substantially describe the quantitative relationship between median pore diameter and strength of castables specimens after heat treatment at the same temperature; the significant differences of the gray relational degree between the interval of pore size and castables strength are characterized; it is also found that for the same interval of pore size,the gray relational degree isaffected by the heat treatment temperature; the pore size interval 〈0.5 μm has the highest gray relational degree with the strength at 110-1 500 ℃.

Translocation and distribution of mercury in biomasses from subtropical forest ecosystems:evidence from stable mercury isotopes

To understand its source,distribution,storage,and translocation in the subtropical forest ecosystems,mercury(Hg)concentrations and stable isotopes in forest biomass tissues(foliage,branch,bark,and trunk)were investigated at Ailao Mountain National Nature Reserve,Southwest China.The total Hg(THg)concentrations in the samples show the following trend:mature foliage(57±19 ng g-1)>bark(11±4.0 ng g-1)>branch(5.4±2.5 ng g-1)>trunk(1.6±0.7 ng g-1).Using the measured THg concentrations and the quantity of respective biomasses,the Hg pools in the forest are:wood(60±26μg m-2)>bark(51±18μg m-2)>foliage(41±11μg m-2)>branch(26±8.3μg m-2).The tree biomasses displayed negativeδ202Hg(-1.83‰to-3.84‰)andΔ199Hg(-0.18‰to-0.62‰).The observedΔ200Hg(-0.08‰to 0.04‰)is not significantly from zero.AΔ199Hg/Δ201Hg ratio of 1.05 was found in tree biomasses,suggesting that mercury has undergone Hg(Ⅱ)photoreduction processes.A Hg-isotope based binary mixing model suggests that Hg in the tree biomasses mainly originated from foliage uptake of atmospheric Hg0,constituting 67%,80%,and 77%of Hg in wood,branch,and bark,respectively.Our study sheds new light on the transportation and sources of Hg in the subtropical forest ecosystems.

Ionic Liquid Assisted Imprint for Efficient and Stable Quasi-2D Perovskite Solar Cells with Controlled Phase Distribution

Although two-dimensional perovskite devices are highly stable,they also lead to a number of challenges.For instance,the introduction of large organic amines makes crystallization process complicated,causing problems such as generally small grain size and blocked charge transfer.In this work,imprint assisted with methylamine acetate were used to improve the morphology of the film,optimize the internal phase distribution,and enhance the charge transfer of the perovskite film.Specifically,imprint promoted the dispersion of spacer cations in the recrystallization process with the assistance of methylamine acetate,thus inhibited the formation of low-n phase induced by the aggregation of spacer cations and facilitated the formation of 3D-like phase.In this case,the corresponding quasi-2D perovskite solar cells delivered improved efficiency and exhibited superior stability.Our work provides an effective strategy to obtain uniform phase distribution for quasi-2D perovskite.

ON THE TESTING FOR ALPHA-STABLE DISTRIBUTIONS OF ETHERNET NETWORK TRAFFIC

The modeling of network traffic is important for the design and application of networks, but little is known as to the characteristics of distribution of packets in network traffic. In this letter the distribution of packets in network traffic is explored.

The α stable distribution model in ocean ambient noise

In view of the non-Gaussian ocean ambient noise,the a stable distribution is applied to the statistical modeling.Firstly,the correspondence between the model characteristic exponent and the sample kurtosis is established based on the similarity in physical meaning of the two.And the kurtosis of the sum of two independent random variables is deduced,and this can be used to explain the kurtosis characteristic of interfered background noise.Secondly,some numerical simulations are made to model samples with higher and lower kurtosis than three,the results show good adaptability in leptokurtic distribution.Finally,three typical samples are taken under quiet environment,air gun interference and ship interference environment.Their Gaussianities are judged by the quantile-quantile plot.And then the four parameters of the model are estimated by the quantile based method and characteristic function based method jointly of the three categories.The statistical law of the characteristic exponent is emphatically analyzed:in the quiet environment,the characteristic exponent is close to 2.0,which is the value of Gaussian model;but for the air gun data,it is between 1.2 and 1.7,which means leptokurtic;and under the interference of the sailing ship,the value of a is related to the ship speed and the distance from the ship source to the receiving location,the more significant the ship impact is,the smaller the characteristic exponent is,which is consistent with the variation of kurtosis of disturbing noise in physical meaning.The results of the model verification show that the a stable distribution behaves well under the above three kinds of trial conditions,especially for the air gun environment which is far superior to the normal distribution.