采用水热处理对γ-Al2O3载体改性,并进行XRD、N2物理吸附-脱附、热重、NH3-TPD及H2-TPR表征。结果表明,γ-Al2O3经过"再水合-焙烧"过程,晶型变好,表面总酸量降低,Pt-Al2O3相互作用增加,提高了Pt Sn K/Al2O3催化剂的丙烷脱氢...采用水热处理对γ-Al2O3载体改性,并进行XRD、N2物理吸附-脱附、热重、NH3-TPD及H2-TPR表征。结果表明,γ-Al2O3经过"再水合-焙烧"过程,晶型变好,表面总酸量降低,Pt-Al2O3相互作用增加,提高了Pt Sn K/Al2O3催化剂的丙烷脱氢转化率、选择性及稳定性。其中,140℃处理4 h时,氧化铝负载的Pt Sn K催化剂表现出最优的丙烷脱氢性能,100 h内平均转化率为33.6%,平均选择性97.3%,失活参数为15.9%。展开更多
Highly coke-resisting ZrO2-decorated Ni/A1203 catalysts for CO methanation were prepared by a two-step process. The support was first loaded with NiO by impregnating method and then modified with ZrO2 by deposition-pr...Highly coke-resisting ZrO2-decorated Ni/A1203 catalysts for CO methanation were prepared by a two-step process. The support was first loaded with NiO by impregnating method and then modified with ZrO2 by deposition-precipitation method （IM-DP）. Nitrogen adsorption- desorption, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, thermogravimetdc analysis, H2 temperature- programmed reduction and desorption, NH3 temperature-programmed desorption, and zeta potential analysis were employed to characterize the samples. The results revealed that, compared with the catalysts with the same composition prepared by co-impregnation （CI） and sequential impregnation （SI） methods, the Ni/A1203 catalyst prepared by IM-DP showed much enhanced catalytic performance for syngas methanation under the condition of atmospheric pressure and a high weight hourly space velocity of 120000 mL.g-1 .h-1. In a 80 h life time test under the condition of 300-600 ~C and 3.0 MPa, this catalyst showed high stability and resistance to coking, and the amount of deposited carbon was only 0.4 wt%. On the contrary, the deposited carbon over the catalyst without ZrO2 reached 1.5 wt% after a 60 h life time test. The improved catalytic performance was attributed to the selective deposition of ZrO2 nanoparticles on the surface of NiO rather than A1203, which could he well controlled via changing the electrostatic interaction in the DP procedure. This unique structure could enhance the dissociation of CO2 and generate surface oxygen intermediates, thus preventing carbon deposition on the Ni particles in syngas methanation.展开更多
文摘采用水热处理对γ-Al2O3载体改性,并进行XRD、N2物理吸附-脱附、热重、NH3-TPD及H2-TPR表征。结果表明,γ-Al2O3经过"再水合-焙烧"过程,晶型变好,表面总酸量降低,Pt-Al2O3相互作用增加,提高了Pt Sn K/Al2O3催化剂的丙烷脱氢转化率、选择性及稳定性。其中,140℃处理4 h时,氧化铝负载的Pt Sn K催化剂表现出最优的丙烷脱氢性能,100 h内平均转化率为33.6%,平均选择性97.3%,失活参数为15.9%。
基金supported by the National Natural Science Foundation of China(No.21476238)the National Basic Research Program(No.2014CB744306)+1 种基金the National Key Technology R&D Program of China(No.2010BAC66B01)the"Strategic Priority Research Program"of Chinese Academy of Sciences(Nos.XDA07010100 and XDA07010200)
文摘Highly coke-resisting ZrO2-decorated Ni/A1203 catalysts for CO methanation were prepared by a two-step process. The support was first loaded with NiO by impregnating method and then modified with ZrO2 by deposition-precipitation method （IM-DP）. Nitrogen adsorption- desorption, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, thermogravimetdc analysis, H2 temperature- programmed reduction and desorption, NH3 temperature-programmed desorption, and zeta potential analysis were employed to characterize the samples. The results revealed that, compared with the catalysts with the same composition prepared by co-impregnation （CI） and sequential impregnation （SI） methods, the Ni/A1203 catalyst prepared by IM-DP showed much enhanced catalytic performance for syngas methanation under the condition of atmospheric pressure and a high weight hourly space velocity of 120000 mL.g-1 .h-1. In a 80 h life time test under the condition of 300-600 ~C and 3.0 MPa, this catalyst showed high stability and resistance to coking, and the amount of deposited carbon was only 0.4 wt%. On the contrary, the deposited carbon over the catalyst without ZrO2 reached 1.5 wt% after a 60 h life time test. The improved catalytic performance was attributed to the selective deposition of ZrO2 nanoparticles on the surface of NiO rather than A1203, which could he well controlled via changing the electrostatic interaction in the DP procedure. This unique structure could enhance the dissociation of CO2 and generate surface oxygen intermediates, thus preventing carbon deposition on the Ni particles in syngas methanation.
