By analyzing the results of compliance minimization of thermoelastic structures,we observed that microstructures play an important role in this optimization problem.Then,we propose to use a multiple variable cutting(M...By analyzing the results of compliance minimization of thermoelastic structures,we observed that microstructures play an important role in this optimization problem.Then,we propose to use a multiple variable cutting(M-VCUT)level set-based model of microstructures to solve the concurrent two-scale topology optimization of thermoelastic structures.A microstructure is obtained by combining multiple virtual microstructures that are derived respectively from multiple microstructure prototypes,thus giving more diversity of microstructure and more flexibility in design optimization.The effective mechanical properties of microstructures are computed in an off-line phase by using the homogenization method,and then a mapping relationship between the design variables and the effective properties is established,which gives a data-driven model of microstructure.In the online phase,the data-driven model is used in the finite element analysis to improve the computational efficiency.The compliance minimization problem is considered,and the results of numerical examples prove that the proposed method is effective.展开更多
Minimal cut sets （or prime implicants： minimal combinations of basic event conditions leading to system failure） are important information for reliability/safety analysis and design. To obtain minimal cut sets for ...Minimal cut sets （or prime implicants： minimal combinations of basic event conditions leading to system failure） are important information for reliability/safety analysis and design. To obtain minimal cut sets for general non-coherent fault trees, including negative basic events or multi-valued basic events, a special procedure such as the consensus rule must be applied to the results obtained by logical operations for coherent fault trees, which will require more steps and time. This paper proposes a simple method for a non-coherent fault tree, whose top event is represented as an AND combination of monotonic sub-trees. A ＂monotonic＂ sub-tree means that it does not have both positive and negative representations for each basic event. It is proven that minimal cut sets can be obtained by a conventional method for coherent fault trees. An illustrative example of a simple event tree analysis shows the detail and characteristics of the proposed method.展开更多
Segmentation of three-dimensional(3D) complicated structures is of great importance for many real applications.In this work we combine graph cut minimization method with a variant of the level set idea for 3D segmenta...Segmentation of three-dimensional(3D) complicated structures is of great importance for many real applications.In this work we combine graph cut minimization method with a variant of the level set idea for 3D segmentation based on the Mumford-Shah model.Compared with the traditional approach for solving the Euler-Lagrange equation we do not need to solve any partial differential equations.Instead,the minimum cut on a special designed graph need to be computed.The method is tested on data with complicated structures.It is rather stable with respect to initial value and the algorithm is nearly parameter free.Experiments show that it can solve large problems much faster than traditional approaches.展开更多
In order to provide theoretical basis and technical support for the afforestation and artificial water supply of P.szechuanica in arid areas,the characteristics of water consumption of P.szechuanica were explored,and ...In order to provide theoretical basis and technical support for the afforestation and artificial water supply of P.szechuanica in arid areas,the characteristics of water consumption of P.szechuanica were explored,and the law of water demand of P.szechuanica was grasped.In this paper,potted seedlings of 1-0 rooted cuttings of P.szechuanica were taken as research objects,and change situation of water consumption under different water control gradients was measured regularly by using weighing method,further analyzing dynamic change of water consumption of P.szechuanica and revealing water demand law of 1-0 rooted cuttings of P.szechuanica.The results showed that total change of water consumption of 1-0 rooted cuttings of P.szechuanica had"slow-fast-slow-fast"double-peak trend in the growth period of the current year,and corresponded with univariate linear relation(R^(2)=0.7137),with significant difference.In whole growth period,water consumption in August was the highest,which was 2.7 times of that in June and July and 1.5 times of that after September.In different water control treatments,the dynamic changes of daily and monthly water consumption were significantly different.In seven water control treatments,monthly water consumption was between(6315.95±1690.70)and(10105.28±3065.30)g/month,and mean was(8211.07±2308.23)g/month.With intensification of water control treatment,water consumption increased,but there was no seedling death due to water shortage.P.szechuanica has great plasticity in water demand,and can survive in both arid and humid environments.Meanwhile,it is revealed that P.szechuanica is the most widely distributed tree species in the region.展开更多
A new fault tree analysis (FTA) computation method is put forth by using modularization technique in FTA with cut sets matrix, and can reduce NP (Nondeterministic polynomial) difficulty effectively. This software can ...A new fault tree analysis (FTA) computation method is put forth by using modularization technique in FTA with cut sets matrix, and can reduce NP (Nondeterministic polynomial) difficulty effectively. This software can run in IBM PC and DOS 3.0 and up. The method provides theoretical basis and computation tool for application of FTA technique in the common engineering system展开更多
基金supported by the National Natural Science Foundation of China(Grant No.12272144).
文摘By analyzing the results of compliance minimization of thermoelastic structures,we observed that microstructures play an important role in this optimization problem.Then,we propose to use a multiple variable cutting(M-VCUT)level set-based model of microstructures to solve the concurrent two-scale topology optimization of thermoelastic structures.A microstructure is obtained by combining multiple virtual microstructures that are derived respectively from multiple microstructure prototypes,thus giving more diversity of microstructure and more flexibility in design optimization.The effective mechanical properties of microstructures are computed in an off-line phase by using the homogenization method,and then a mapping relationship between the design variables and the effective properties is established,which gives a data-driven model of microstructure.In the online phase,the data-driven model is used in the finite element analysis to improve the computational efficiency.The compliance minimization problem is considered,and the results of numerical examples prove that the proposed method is effective.
文摘Minimal cut sets （or prime implicants： minimal combinations of basic event conditions leading to system failure） are important information for reliability/safety analysis and design. To obtain minimal cut sets for general non-coherent fault trees, including negative basic events or multi-valued basic events, a special procedure such as the consensus rule must be applied to the results obtained by logical operations for coherent fault trees, which will require more steps and time. This paper proposes a simple method for a non-coherent fault tree, whose top event is represented as an AND combination of monotonic sub-trees. A ＂monotonic＂ sub-tree means that it does not have both positive and negative representations for each basic event. It is proven that minimal cut sets can be obtained by a conventional method for coherent fault trees. An illustrative example of a simple event tree analysis shows the detail and characteristics of the proposed method.
基金support from the Centre for Integrated Petroleum Research(CIPR),University of Bergen, Norway,and Singapore MOE Grant T207B2202NRF2007IDMIDM002-010
文摘Segmentation of three-dimensional(3D) complicated structures is of great importance for many real applications.In this work we combine graph cut minimization method with a variant of the level set idea for 3D segmentation based on the Mumford-Shah model.Compared with the traditional approach for solving the Euler-Lagrange equation we do not need to solve any partial differential equations.Instead,the minimum cut on a special designed graph need to be computed.The method is tested on data with complicated structures.It is rather stable with respect to initial value and the algorithm is nearly parameter free.Experiments show that it can solve large problems much faster than traditional approaches.
基金Supported by Natural Science Foundation of Tibet Autonomous Region(XZ2019ZRG-58)Forestry Discipline Innovation Team Construction Project of Tibet Agriculture&Animal Husbandry University(Tibet Financial Forecast:2020-001).
文摘In order to provide theoretical basis and technical support for the afforestation and artificial water supply of P.szechuanica in arid areas,the characteristics of water consumption of P.szechuanica were explored,and the law of water demand of P.szechuanica was grasped.In this paper,potted seedlings of 1-0 rooted cuttings of P.szechuanica were taken as research objects,and change situation of water consumption under different water control gradients was measured regularly by using weighing method,further analyzing dynamic change of water consumption of P.szechuanica and revealing water demand law of 1-0 rooted cuttings of P.szechuanica.The results showed that total change of water consumption of 1-0 rooted cuttings of P.szechuanica had"slow-fast-slow-fast"double-peak trend in the growth period of the current year,and corresponded with univariate linear relation(R^(2)=0.7137),with significant difference.In whole growth period,water consumption in August was the highest,which was 2.7 times of that in June and July and 1.5 times of that after September.In different water control treatments,the dynamic changes of daily and monthly water consumption were significantly different.In seven water control treatments,monthly water consumption was between(6315.95±1690.70)and(10105.28±3065.30)g/month,and mean was(8211.07±2308.23)g/month.With intensification of water control treatment,water consumption increased,but there was no seedling death due to water shortage.P.szechuanica has great plasticity in water demand,and can survive in both arid and humid environments.Meanwhile,it is revealed that P.szechuanica is the most widely distributed tree species in the region.
文摘A new fault tree analysis (FTA) computation method is put forth by using modularization technique in FTA with cut sets matrix, and can reduce NP (Nondeterministic polynomial) difficulty effectively. This software can run in IBM PC and DOS 3.0 and up. The method provides theoretical basis and computation tool for application of FTA technique in the common engineering system
基金重庆市自然科学基金(the Natural Science Foundation of Chongqing of China under Grant No.2005BB2063)国家教育部新世纪人才支持计划(the New Century Excellent Talent Foundation from MOE of China under Grant)+1 种基金重庆市教委科学技术项目(No.050509No.060517)
