Based on the characteristics of ATM system and the special requirement of financial transaction, an overall design of hardware and software structure of ATM was made. For software structure, the pattern of modules and...Based on the characteristics of ATM system and the special requirement of financial transaction, an overall design of hardware and software structure of ATM was made. For software structure, the pattern of modules and table? drive is adopted to realize the security of financial transaction and the diagnosis of communication fault. A new method, which is based on the application layer, transport layer and network layer, is used for diagnosing communication fault. Supporting both magnetic card and IC card, the system has been put into use in real financial systems, and has brought about both economic and social effects.展开更多
The hardware optimization technique of mono similarity system generation is presented based on hardware/software(HW/SW) co design.First,the coarse structure of sub graphs' matching based on full customized HW...The hardware optimization technique of mono similarity system generation is presented based on hardware/software(HW/SW) co design.First,the coarse structure of sub graphs' matching based on full customized HW/SW co design is put forward.Then,a universal sub graphs' combination method is discussed.Next,a more advanced vertexes' compression algorithm based on sub graphs' combination method is discussed with great emphasis.Experiments are done successfully with perfect results verifying all the formulas and the methods above.展开更多
The article design a vehicle monitoring terminal system based on μ C/OS and introduces the hardware system design of STM32F407 as the control core. On the basis of transplant μ C/OS operating system, the system soft...The article design a vehicle monitoring terminal system based on μ C/OS and introduces the hardware system design of STM32F407 as the control core. On the basis of transplant μ C/OS operating system, the system software architecture, application-layer multi- task and the priority has been designed, focuses on the use GPRS tasks, preparation methods GPS tasks. After experimental tests, the system is stable and reliable, the realization of real-time vehicle monitoring. System design methodology for embedded system application development has a certain rcfcrence value.展开更多
The present paper discusses a design method for the head position in a Hard Disk Drive （HDD） control system. In the HDD control system, the sampling interval of the head position is constrained because of the hardwa...The present paper discusses a design method for the head position in a Hard Disk Drive （HDD） control system. In the HDD control system, the sampling interval of the head position is constrained because of the hardware specifications, but the hold interval of the control input is not constrained. In the present study, a multirate control system is designed, in which the sampling and the hold intervals are not equal. A multirate control law, which stabilizes a closed-loop system, is extended using newly introduced parameters such that the sample response of the plant output is maintained. Furthermore, intersample ripples in the steady state are eliminated using the new design parameters, which can be selected independently of the sample response. As a result, the intersample response can be improved independently of the sample response. The proposed method is applied to a benchmark problem of an HDD system, and its effectiveness is demonstrated.展开更多
his paper studies the vehicle CAN bus control technology, and analyzes the control system of automobile based on CAN technology. This paper focus on the design of single-chip microcomputer STC89C52 be as the platform ...his paper studies the vehicle CAN bus control technology, and analyzes the control system of automobile based on CAN technology. This paper focus on the design of single-chip microcomputer STC89C52 be as the platform to achieve the design of CAN bus, introduce in detail the structure and working principle of SJA1000 and PCA82C250, and on basis of it, we design the CAN bus interface, and gives the hardware circuit design and software process of SJA1000 initialization, receiving, sending message. The system can give some subsequent reference for CAN bus application.展开更多
The paper analyze and design and implement a remote control system based on network. A computer network remote control system mainly includes server, client and the control information. Server registration information...The paper analyze and design and implement a remote control system based on network. A computer network remote control system mainly includes server, client and the control information. Server registration information realize the user command; client provides network hardware, software and other system resources, the system response message and then feedback service instruction; control information transmission layer implementation using TCPflP protocol to control information including control of resources and control commands etc.. This paper adopts centralized network control system model, the structure of the network system realize unified observation, control, coordination, and control of high efficiency. The use of key technologies, such as Socket and COM to realize the goal of computer hardware resource control, software resource management and other functions.展开更多
We designed a universal digital energy spectroscopy based on online digital signal processing. A prototype system was built and tested. Signals from radiation detectors were processed via a digital filter whose coeffi...We designed a universal digital energy spectroscopy based on online digital signal processing. A prototype system was built and tested. Signals from radiation detectors were processed via a digital filter whose coefficients could be modified without changing the hardware. The paper introduces the hardware design of the digital energy spectroscopy system as well as the full set of software consisting of the selection of the coefficients of the finite impulse response (FIR) filter and the coding in the field-programmable gate array (FPGA). The system was tested with the high purity germanium (HPGe) detector. The results showed that this prototype can achieve an energy resolution close to that of a traditional multi-channel analyzer (MCA) with a much higher counting rate.展开更多
In this paper a fast digital real-time spectrometer was developed for timing and analysis of nuclear pulse signals. The hardware system design and algorithm implementation with field-programming gate array （FPGA） an...In this paper a fast digital real-time spectrometer was developed for timing and analysis of nuclear pulse signals. The hardware system design and algorithm implementation with field-programming gate array （FPGA） and digital signal processor （DSP） were introduced. The performance of the digital constant fraction discrimination （dCFD） platform was experimentally tested with Agilent 80 MHz function/arbitrary waveform generator and LaC13：Ce3＋ scintillator detector for 22Na positron annihilation gamma spectroscopy. The amplitude and time information of ＂/photon was online obtained. The energy resolution could be 5.525% and the timing resolution 293.75 ps, the system error estimation of dCFD approach was also studied. The results showed that this spectrometer achieved a timing resolution close to that of traditional CFD timing resolution with a more sim- plified system structure.展开更多
文摘Based on the characteristics of ATM system and the special requirement of financial transaction, an overall design of hardware and software structure of ATM was made. For software structure, the pattern of modules and table? drive is adopted to realize the security of financial transaction and the diagnosis of communication fault. A new method, which is based on the application layer, transport layer and network layer, is used for diagnosing communication fault. Supporting both magnetic card and IC card, the system has been put into use in real financial systems, and has brought about both economic and social effects.
文摘The hardware optimization technique of mono similarity system generation is presented based on hardware/software(HW/SW) co design.First,the coarse structure of sub graphs' matching based on full customized HW/SW co design is put forward.Then,a universal sub graphs' combination method is discussed.Next,a more advanced vertexes' compression algorithm based on sub graphs' combination method is discussed with great emphasis.Experiments are done successfully with perfect results verifying all the formulas and the methods above.
文摘The article design a vehicle monitoring terminal system based on μ C/OS and introduces the hardware system design of STM32F407 as the control core. On the basis of transplant μ C/OS operating system, the system software architecture, application-layer multi- task and the priority has been designed, focuses on the use GPRS tasks, preparation methods GPS tasks. After experimental tests, the system is stable and reliable, the realization of real-time vehicle monitoring. System design methodology for embedded system application development has a certain rcfcrence value.
文摘The present paper discusses a design method for the head position in a Hard Disk Drive （HDD） control system. In the HDD control system, the sampling interval of the head position is constrained because of the hardware specifications, but the hold interval of the control input is not constrained. In the present study, a multirate control system is designed, in which the sampling and the hold intervals are not equal. A multirate control law, which stabilizes a closed-loop system, is extended using newly introduced parameters such that the sample response of the plant output is maintained. Furthermore, intersample ripples in the steady state are eliminated using the new design parameters, which can be selected independently of the sample response. As a result, the intersample response can be improved independently of the sample response. The proposed method is applied to a benchmark problem of an HDD system, and its effectiveness is demonstrated.
文摘his paper studies the vehicle CAN bus control technology, and analyzes the control system of automobile based on CAN technology. This paper focus on the design of single-chip microcomputer STC89C52 be as the platform to achieve the design of CAN bus, introduce in detail the structure and working principle of SJA1000 and PCA82C250, and on basis of it, we design the CAN bus interface, and gives the hardware circuit design and software process of SJA1000 initialization, receiving, sending message. The system can give some subsequent reference for CAN bus application.
文摘The paper analyze and design and implement a remote control system based on network. A computer network remote control system mainly includes server, client and the control information. Server registration information realize the user command; client provides network hardware, software and other system resources, the system response message and then feedback service instruction; control information transmission layer implementation using TCPflP protocol to control information including control of resources and control commands etc.. This paper adopts centralized network control system model, the structure of the network system realize unified observation, control, coordination, and control of high efficiency. The use of key technologies, such as Socket and COM to realize the goal of computer hardware resource control, software resource management and other functions.
基金supported by the National Natural Science Foundation of China (Grant No.10975132)
文摘We designed a universal digital energy spectroscopy based on online digital signal processing. A prototype system was built and tested. Signals from radiation detectors were processed via a digital filter whose coefficients could be modified without changing the hardware. The paper introduces the hardware design of the digital energy spectroscopy system as well as the full set of software consisting of the selection of the coefficients of the finite impulse response (FIR) filter and the coding in the field-programmable gate array (FPGA). The system was tested with the high purity germanium (HPGe) detector. The results showed that this prototype can achieve an energy resolution close to that of a traditional multi-channel analyzer (MCA) with a much higher counting rate.
基金supported by the National Natural Science Foundation of China (Grant No. 10975132)
文摘In this paper a fast digital real-time spectrometer was developed for timing and analysis of nuclear pulse signals. The hardware system design and algorithm implementation with field-programming gate array （FPGA） and digital signal processor （DSP） were introduced. The performance of the digital constant fraction discrimination （dCFD） platform was experimentally tested with Agilent 80 MHz function/arbitrary waveform generator and LaC13：Ce3＋ scintillator detector for 22Na positron annihilation gamma spectroscopy. The amplitude and time information of ＂/photon was online obtained. The energy resolution could be 5.525% and the timing resolution 293.75 ps, the system error estimation of dCFD approach was also studied. The results showed that this spectrometer achieved a timing resolution close to that of traditional CFD timing resolution with a more sim- plified system structure.
